selftests: mlxsw: rif_lag_vlan: Add a new selftest

This test verifies driver behavior with regards to creation of RIFs for LAG
VLAN uppers as ports are added or removed to/from the LAG.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tools/testing/selftests/drivers/net/mlxsw/rif_lag_vlan.sh

+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+ALL_TESTS="
+	lag_rif_add
+	lag_rif_nomaster
+	lag_rif_remaster
+	lag_rif_nomaster_addr
+"
+
+NUM_NETIFS=2
+source $lib_dir/lib.sh
+source $lib_dir/devlink_lib.sh
+
+setup_prepare()
+{
+	swp1=${NETIFS[p1]}
+	swp2=${NETIFS[p2]}
+
+	team_create lag1 lacp
+	ip link set dev lag1 addrgenmode none
+	ip link set dev lag1 address $(mac_get $swp1)
+
+	team_create lag2 lacp
+	ip link set dev lag2 addrgenmode none
+	ip link set dev lag2 address $(mac_get $swp2)
+
+	ip link set dev $swp1 master lag1
+	ip link set dev $swp1 up
+
+	ip link set dev $swp2 master lag2
+	ip link set dev $swp2 up
+
+	vlan_create lag1 100
+	ip link set dev lag1.100 addrgenmode none
+
+	vlan_create lag1 200
+	ip link set dev lag1.200 addrgenmode none
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip link del dev lag1.200
+	ip link del dev lag1.100
+
+	ip link set dev $swp2 nomaster
+	ip link set dev $swp2 down
+
+	ip link set dev $swp1 nomaster
+	ip link set dev $swp1 down
+
+	ip link del dev lag2
+	ip link del dev lag1
+}
+
+lag_rif_add()
+{
+	RET=0
+
+	local rifs_occ_t0=$(devlink_resource_occ_get rifs)
+	__addr_add_del lag1.100 add 192.0.2.2/28
+	__addr_add_del lag1.200 add 192.0.2.18/28
+	sleep 1
+	local rifs_occ_t1=$(devlink_resource_occ_get rifs)
+	local expected_rifs=$((rifs_occ_t0 + 2))
+
+	((expected_rifs == rifs_occ_t1))
+	check_err $? "Expected $expected_rifs RIFs, $rifs_occ_t1 are used"
+
+	log_test "Add RIFs for LAG VLANs on address addition"
+}
+
+lag_rif_nomaster()
+{
+	RET=0
+
+	local rifs_occ_t0=$(devlink_resource_occ_get rifs)
+	ip link set dev $swp1 nomaster
+	sleep 1
+	local rifs_occ_t1=$(devlink_resource_occ_get rifs)
+	local expected_rifs=$((rifs_occ_t0 - 2))
+
+	((expected_rifs == rifs_occ_t1))
+	check_err $? "Expected $expected_rifs RIFs, $rifs_occ_t1 are used"
+
+	log_test "Drop RIFs for LAG VLANs on port deslavement"
+}
+
+lag_rif_remaster()
+{
+	RET=0
+
+	local rifs_occ_t0=$(devlink_resource_occ_get rifs)
+	ip link set dev $swp1 down
+	ip link set dev $swp1 master lag1
+	ip link set dev $swp1 up
+	setup_wait_dev $swp1
+	local rifs_occ_t1=$(devlink_resource_occ_get rifs)
+	local expected_rifs=$((rifs_occ_t0 + 2))
+
+	((expected_rifs == rifs_occ_t1))
+	check_err $? "Expected $expected_rifs RIFs, $rifs_occ_t1 are used"
+
+	log_test "Add RIFs for LAG VLANs on port reenslavement"
+}
+
+lag_rif_nomaster_addr()
+{
+	local rifs_occ_t0=$(devlink_resource_occ_get rifs)
+
+	# Adding an address while the port is LAG'd shouldn't generate a RIF.
+	__addr_add_del $swp1 add 192.0.2.65/28
+	sleep 1
+	local rifs_occ_t1=$(devlink_resource_occ_get rifs)
+	local expected_rifs=$((rifs_occ_t0))
+
+	((expected_rifs == rifs_occ_t1))
+	check_err $? "After adding IP: Expected $expected_rifs RIFs, $rifs_occ_t1 are used"
+
+	# Removing the port from LAG should drop two RIFs for the LAG VLANs (as
+	# tested in lag_rif_nomaster), but since the port now has an address, it
+	# should gain a RIF.
+	ip link set dev $swp1 nomaster
+	sleep 1
+	local rifs_occ_t2=$(devlink_resource_occ_get rifs)
+	local expected_rifs=$((rifs_occ_t0 - 1))
+
+	((expected_rifs == rifs_occ_t2))
+	check_err $? "After deslaving: Expected $expected_rifs RIFs, $rifs_occ_t2 are used"
+
+	__addr_add_del $swp1 del 192.0.2.65/28
+	log_test "Add RIF for port on deslavement from LAG"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS