ath10k: add new hw_ops for sdio chip
It report error message while suspend/resume test. dmesg log: [ 150.749962] ath10k_sdio mmc1:0001:1: hif read32 not supported [ 150.755728] ath10k_sdio mmc1:0001:1: failed to set coverage class: expected integer microsecond value in register Reason is sdio chip does not support set_coverage_class as well as pcie chip, remove the set_coverage_class handler will avoid it. callstack of the error message: OUTLINED_FUNCTION_6+0xc/0x14 [ath10k_core] ath10k_mac_op_set_coverage_class+0x2c/0x40 [ath10k_core] ieee80211_reconfig+0x5d0/0x108c [mac80211] ieee80211_resume+0x34/0x6c [mac80211] wiphy_resume+0xbc/0x13c [cfg80211] dpm_run_callback+0xa4/0x168 device_resume+0x1d4/0x200 async_resume+0x1c/0x34 async_run_entry_fn+0x48/0xf8 process_one_work+0x178/0x2f8 worker_thread+0x1d8/0x2cc kthread+0x11c/0x12c ret_from_fork+0x10/0x18 the error log will not happen after this patch applied. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00007-QCARMSWP-1. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Showing
Please register or sign in to comment