Merge branch 'zynq/clksrc/cleanup' of git://git.xilinx.com/linux-xlnx into next/drivers

From Michal Simek <michal.simek@xilinx.com>:

* 'zynq/clksrc/cleanup' of git://git.xilinx.com/linux-xlnx:
  arm: zynq: Move timer to generic location
  arm: zynq: Do not use xilinx specific function names
  arm: zynq: Move timer to clocksource interface
  arm: zynq: Use standard timer binding
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt

+Cadence TTC - Triple Timer Counter
+
+Required properties:
+- compatible : Should be "cdns,ttc".
+- reg : Specifies base physical address and size of the registers.
+- interrupts : A list of 3 interrupts; one per timer channel.
+- clocks: phandle to the source clock
+
+Example:
+
+ttc0: ttc0@f8001000 {
+	interrupt-parent = <&intc>;
+	interrupts = < 0 10 4 0 11 4 0 12 4 >;
+	compatible = "cdns,ttc";
+	reg = <0xF8001000 0x1000>;
+	clocks = <&cpu_clk 3>;
+};

arch/arm/Kconfig

@@ -1598,6 +1598,7 @@ config HAVE_ARM_ARCH_TIMER
 config HAVE_ARM_TWD
 	bool
 	depends on SMP
+	select CLKSRC_OF if OF
 	help
 	  This options enables support for the ARM timer and watchdog unit
 

arch/arm/boot/dts/zynq-7000.dtsi

@@ -111,56 +111,23 @@ cpu_clk: cpu_clk {
 		};
 
 		ttc0: ttc0@f8001000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "xlnx,ttc";
+			interrupt-parent = <&intc>;
+			interrupts = < 0 10 4 0 11 4 0 12 4 >;
+			compatible = "cdns,ttc";
 			reg = <0xF8001000 0x1000>;
 			clocks = <&cpu_clk 3>;
 			clock-names = "cpu_1x";
 			clock-ranges;
-
-			ttc0_0: ttc0.0 {
-				status = "disabled";
-				reg = <0>;
-				interrupts = <0 10 4>;
-			};
-			ttc0_1: ttc0.1 {
-				status = "disabled";
-				reg = <1>;
-				interrupts = <0 11 4>;
-			};
-			ttc0_2: ttc0.2 {
-				status = "disabled";
-				reg = <2>;
-				interrupts = <0 12 4>;
-			};
 		};
 
 		ttc1: ttc1@f8002000 {
-			#interrupt-parent = <&intc>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "xlnx,ttc";
+			interrupt-parent = <&intc>;
+			interrupts = < 0 37 4 0 38 4 0 39 4 >;
+			compatible = "cdns,ttc";
 			reg = <0xF8002000 0x1000>;
 			clocks = <&cpu_clk 3>;
 			clock-names = "cpu_1x";
 			clock-ranges;
-
-			ttc1_0: ttc1.0 {
-				status = "disabled";
-				reg = <0>;
-				interrupts = <0 37 4>;
-			};
-			ttc1_1: ttc1.1 {
-				status = "disabled";
-				reg = <1>;
-				interrupts = <0 38 4>;
-			};
-			ttc1_2: ttc1.2 {
-				status = "disabled";
-				reg = <2>;
-				interrupts = <0 39 4>;
-			};
 		};
 	};
 };

arch/arm/boot/dts/zynq-zc702.dts

@@ -32,13 +32,3 @@ chosen {
 &ps_clk {
 	clock-frequency = <33333330>;
 };
-
-&ttc0_0 {
-	status = "ok";
-	compatible = "xlnx,ttc-counter-clocksource";
-};
-
-&ttc0_1 {
-	status = "ok";
-	compatible = "xlnx,ttc-counter-clockevent";
-};

arch/arm/include/asm/smp_twd.h

@@ -34,12 +34,4 @@ struct twd_local_timer name __initdata = {	\
 
 int twd_local_timer_register(struct twd_local_timer *);
 
-#ifdef CONFIG_HAVE_ARM_TWD
-void twd_local_timer_of_register(void);
-#else
-static inline void twd_local_timer_of_register(void)
-{
-}
-#endif
-
 #endif

arch/arm/kernel/smp_twd.c

@@ -362,25 +362,13 @@ int __init twd_local_timer_register(struct twd_local_timer *tlt)
 }
 
 #ifdef CONFIG_OF
-const static struct of_device_id twd_of_match[] __initconst = {
-	{ .compatible = "arm,cortex-a9-twd-timer",	},
-	{ .compatible = "arm,cortex-a5-twd-timer",	},
-	{ .compatible = "arm,arm11mp-twd-timer",	},
-	{ },
-};
-
-void __init twd_local_timer_of_register(void)
+static void __init twd_local_timer_of_register(struct device_node *np)
 {
-	struct device_node *np;
 	int err;
 
 	if (!is_smp() || !setup_max_cpus)
 		return;
 
-	np = of_find_matching_node(NULL, twd_of_match);
-	if (!np)
-		return;
-
 	twd_ppi = irq_of_parse_and_map(np, 0);
 	if (!twd_ppi) {
 		err = -EINVAL;
@@ -398,4 +386,7 @@ void __init twd_local_timer_of_register(void)
 out:
 	WARN(err, "twd_local_timer_of_register failed (%d)\n", err);
 }
+CLOCKSOURCE_OF_DECLARE(arm_twd_a9, "arm,cortex-a9-twd-timer", twd_local_timer_of_register);
+CLOCKSOURCE_OF_DECLARE(arm_twd_a5, "arm,cortex-a5-twd-timer", twd_local_timer_of_register);
+CLOCKSOURCE_OF_DECLARE(arm_twd_11mp, "arm,arm11mp-twd-timer", twd_local_timer_of_register);
 #endif

arch/arm/mach-highbank/highbank.c

@@ -32,7 +32,6 @@
 #include <asm/cacheflush.h>
 #include <asm/cputype.h>
 #include <asm/smp_plat.h>
-#include <asm/smp_twd.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/timer-sp.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -119,10 +118,10 @@ static void __init highbank_timer_init(void)
 	sp804_clocksource_and_sched_clock_init(timer_base + 0x20, "timer1");
 	sp804_clockevents_init(timer_base, irq, "timer0");
 
-	twd_local_timer_of_register();
-
 	arch_timer_of_register();
 	arch_timer_sched_clock_init();
+
+	clocksource_of_init();
 }
 
 static void highbank_power_off(void)

arch/arm/mach-imx/mach-imx6q.c

@@ -12,6 +12,7 @@
 
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/clocksource.h>
 #include <linux/cpu.h>
 #include <linux/delay.h>
 #include <linux/export.h>
@@ -28,11 +29,9 @@
 #include <linux/regmap.h>
 #include <linux/micrel_phy.h>
 #include <linux/mfd/syscon.h>
-#include <asm/smp_twd.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/time.h>
 #include <asm/system_misc.h>
 
 #include "common.h"
@@ -292,7 +291,7 @@ static void __init imx6q_init_irq(void)
 static void __init imx6q_timer_init(void)
 {
 	mx6q_clocks_init();
-	twd_local_timer_of_register();
+	clocksource_of_init();
 	imx_print_silicon_rev("i.MX6Q", imx6q_revision());
 }
 

arch/arm/mach-omap2/timer.c

@@ -597,7 +597,7 @@ void __init omap4_local_timer_init(void)
 		int err;
 
 		if (of_have_populated_dt()) {
-			twd_local_timer_of_register();
+			clocksource_of_init();
 			return;
 		}
 

arch/arm/mach-spear13xx/spear13xx.c

@@ -15,12 +15,12 @@
 
 #include <linux/amba/pl022.h>
 #include <linux/clk.h>
+#include <linux/clocksource.h>
 #include <linux/dw_dmac.h>
 #include <linux/err.h>
 #include <linux/of.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/map.h>
-#include <asm/smp_twd.h>
 #include <mach/dma.h>
 #include <mach/generic.h>
 #include <mach/spear.h>
@@ -179,5 +179,5 @@ void __init spear13xx_timer_init(void)
 	clk_put(pclk);
 
 	spear_setup_of_timer();
-	twd_local_timer_of_register();
+	clocksource_of_init();
 }

arch/arm/mach-ux500/timer.c

@@ -7,6 +7,7 @@
 #include <linux/io.h>
 #include <linux/errno.h>
 #include <linux/clksrc-dbx500-prcmu.h>
+#include <linux/clocksource.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/platform_data/clocksource-nomadik-mtu.h>
@@ -32,7 +33,7 @@ static void __init ux500_twd_init(void)
 	twd_local_timer = &u8500_twd_local_timer;
 
 	if (of_have_populated_dt())
-		twd_local_timer_of_register();
+		clocksource_of_init();
 	else {
 		err = twd_local_timer_register(twd_local_timer);
 		if (err)

arch/arm/mach-vexpress/v2m.c

@@ -5,6 +5,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/mmci.h>
 #include <linux/io.h>
+#include <linux/clocksource.h>
 #include <linux/smp.h>
 #include <linux/init.h>
 #include <linux/irqchip.h>
@@ -25,7 +26,6 @@
 #include <asm/arch_timer.h>
 #include <asm/mach-types.h>
 #include <asm/sizes.h>
-#include <asm/smp_twd.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
@@ -435,6 +435,7 @@ static void __init v2m_dt_timer_init(void)
 
 	vexpress_clk_of_init();
 
+	clocksource_of_init();
 	do {
 		node = of_find_compatible_node(node, NULL, "arm,sp804");
 	} while (node && vexpress_get_site_by_node(node) != VEXPRESS_SITE_MB);
@@ -445,8 +446,7 @@ static void __init v2m_dt_timer_init(void)
 				irq_of_parse_and_map(node, 0));
 	}
 
-	if (arch_timer_of_register() != 0)
-		twd_local_timer_of_register();
+	arch_timer_of_register();
 
 	if (arch_timer_sched_clock_init() != 0)
 		versatile_sched_clock_init(vexpress_get_24mhz_clock_base(),

arch/arm/mach-zynq/Kconfig

@@ -9,5 +9,6 @@ config ARCH_ZYNQ
 	select MIGHT_HAVE_CACHE_L2X0
 	select USE_OF
 	select SPARSE_IRQ
+	select CADENCE_TTC_TIMER
 	help
 	  Support for Xilinx Zynq ARM Cortex A9 Platform

arch/arm/mach-zynq/Makefile

@@ -3,4 +3,4 @@
 #
 
 # Common support
-obj-y				:= common.o timer.o
+obj-y				:= common.o

arch/arm/mach-zynq/common.c

@@ -20,6 +20,7 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/clk/zynq.h>
+#include <linux/clocksource.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
@@ -77,7 +78,7 @@ static void __init xilinx_zynq_timer_init(void)
 
 	xilinx_zynq_clocks_init(slcr);
 
-	xttcps_timer_init();
+	clocksource_of_init();
 }
 
 /**

arch/arm/mach-zynq/common.h

@@ -17,6 +17,4 @@
 #ifndef __MACH_ZYNQ_COMMON_H__
 #define __MACH_ZYNQ_COMMON_H__
 
-void __init xttcps_timer_init(void);
-
 #endif

arch/arm/mach-zynq/timer.c

-/*
- * This file contains driver for the Xilinx PS Timer Counter IP.
- *
- *  Copyright (C) 2011 Xilinx
- *
- * based on arch/mips/kernel/time.c timer driver
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/interrupt.h>
-#include <linux/clockchips.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/slab.h>
-#include <linux/clk-provider.h>
-#include "common.h"
-
-/*
- * Timer Register Offset Definitions of Timer 1, Increment base address by 4
- * and use same offsets for Timer 2
- */
-#define XTTCPS_CLK_CNTRL_OFFSET		0x00 /* Clock Control Reg, RW */
-#define XTTCPS_CNT_CNTRL_OFFSET		0x0C /* Counter Control Reg, RW */
-#define XTTCPS_COUNT_VAL_OFFSET		0x18 /* Counter Value Reg, RO */
-#define XTTCPS_INTR_VAL_OFFSET		0x24 /* Interval Count Reg, RW */
-#define XTTCPS_ISR_OFFSET		0x54 /* Interrupt Status Reg, RO */
-#define XTTCPS_IER_OFFSET		0x60 /* Interrupt Enable Reg, RW */
-
-#define XTTCPS_CNT_CNTRL_DISABLE_MASK	0x1
-
-/*
- * Setup the timers to use pre-scaling, using a fixed value for now that will
- * work across most input frequency, but it may need to be more dynamic
- */
-#define PRESCALE_EXPONENT	11	/* 2 ^ PRESCALE_EXPONENT = PRESCALE */
-#define PRESCALE		2048	/* The exponent must match this */
-#define CLK_CNTRL_PRESCALE	((PRESCALE_EXPONENT - 1) << 1)
-#define CLK_CNTRL_PRESCALE_EN	1
-#define CNT_CNTRL_RESET		(1<<4)
-
-/**
- * struct xttcps_timer - This definition defines local timer structure
- *
- * @base_addr:	Base address of timer
- **/
-struct xttcps_timer {
-	void __iomem	*base_addr;
-};
-
-struct xttcps_timer_clocksource {
-	struct xttcps_timer	xttc;
-	struct clocksource	cs;
-};
-
-#define to_xttcps_timer_clksrc(x) \
-		container_of(x, struct xttcps_timer_clocksource, cs)
-
-struct xttcps_timer_clockevent {
-	struct xttcps_timer		xttc;
-	struct clock_event_device	ce;
-	struct clk			*clk;
-};
-
-#define to_xttcps_timer_clkevent(x) \
-		container_of(x, struct xttcps_timer_clockevent, ce)
-
-/**
- * xttcps_set_interval - Set the timer interval value
- *
- * @timer:	Pointer to the timer instance
- * @cycles:	Timer interval ticks
- **/
-static void xttcps_set_interval(struct xttcps_timer *timer,
-					unsigned long cycles)
-{
-	u32 ctrl_reg;
-
-	/* Disable the counter, set the counter value  and re-enable counter */
-	ctrl_reg = __raw_readl(timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
-	ctrl_reg |= XTTCPS_CNT_CNTRL_DISABLE_MASK;
-	__raw_writel(ctrl_reg, timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
-
-	__raw_writel(cycles, timer->base_addr + XTTCPS_INTR_VAL_OFFSET);
-
-	/*
-	 * Reset the counter (0x10) so that it starts from 0, one-shot
-	 * mode makes this needed for timing to be right.
-	 */
-	ctrl_reg |= CNT_CNTRL_RESET;
-	ctrl_reg &= ~XTTCPS_CNT_CNTRL_DISABLE_MASK;
-	__raw_writel(ctrl_reg, timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
-}
-
-/**
- * xttcps_clock_event_interrupt - Clock event timer interrupt handler
- *
- * @irq:	IRQ number of the Timer
- * @dev_id:	void pointer to the xttcps_timer instance
- *
- * returns: Always IRQ_HANDLED - success
- **/
-static irqreturn_t xttcps_clock_event_interrupt(int irq, void *dev_id)
-{
-	struct xttcps_timer_clockevent *xttce = dev_id;
-	struct xttcps_timer *timer = &xttce->xttc;
-
-	/* Acknowledge the interrupt and call event handler */
-	__raw_readl(timer->base_addr + XTTCPS_ISR_OFFSET);
-
-	xttce->ce.event_handler(&xttce->ce);
-
-	return IRQ_HANDLED;
-}
-
-/**
- * __xttc_clocksource_read - Reads the timer counter register
- *
- * returns: Current timer counter register value
- **/
-static cycle_t __xttc_clocksource_read(struct clocksource *cs)
-{
-	struct xttcps_timer *timer = &to_xttcps_timer_clksrc(cs)->xttc;
-
-	return (cycle_t)__raw_readl(timer->base_addr +
-				XTTCPS_COUNT_VAL_OFFSET);
-}
-
-/**
- * xttcps_set_next_event - Sets the time interval for next event
- *
- * @cycles:	Timer interval ticks
- * @evt:	Address of clock event instance
- *
- * returns: Always 0 - success
- **/
-static int xttcps_set_next_event(unsigned long cycles,
-					struct clock_event_device *evt)
-{
-	struct xttcps_timer_clockevent *xttce = to_xttcps_timer_clkevent(evt);
-	struct xttcps_timer *timer = &xttce->xttc;
-
-	xttcps_set_interval(timer, cycles);
-	return 0;
-}
-
-/**
- * xttcps_set_mode - Sets the mode of timer
- *
- * @mode:	Mode to be set
- * @evt:	Address of clock event instance
- **/
-static void xttcps_set_mode(enum clock_event_mode mode,
-					struct clock_event_device *evt)
-{
-	struct xttcps_timer_clockevent *xttce = to_xttcps_timer_clkevent(evt);
-	struct xttcps_timer *timer = &xttce->xttc;
-	u32 ctrl_reg;
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		xttcps_set_interval(timer,
-				     DIV_ROUND_CLOSEST(clk_get_rate(xttce->clk),
-						       PRESCALE * HZ));
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		ctrl_reg = __raw_readl(timer->base_addr +
-					XTTCPS_CNT_CNTRL_OFFSET);
-		ctrl_reg |= XTTCPS_CNT_CNTRL_DISABLE_MASK;
-		__raw_writel(ctrl_reg,
-				timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		ctrl_reg = __raw_readl(timer->base_addr +
-					XTTCPS_CNT_CNTRL_OFFSET);
-		ctrl_reg &= ~XTTCPS_CNT_CNTRL_DISABLE_MASK;
-		__raw_writel(ctrl_reg,
-				timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
-		break;
-	}
-}
-
-static void __init zynq_ttc_setup_clocksource(struct device_node *np,
-					     void __iomem *base)
-{
-	struct xttcps_timer_clocksource *ttccs;
-	struct clk *clk;
-	int err;
-	u32 reg;
-
-	ttccs = kzalloc(sizeof(*ttccs), GFP_KERNEL);
-	if (WARN_ON(!ttccs))
-		return;
-
-	err = of_property_read_u32(np, "reg", &reg);
-	if (WARN_ON(err))
-		return;
-
-	clk = of_clk_get_by_name(np, "cpu_1x");
-	if (WARN_ON(IS_ERR(clk)))
-		return;
-
-	err = clk_prepare_enable(clk);
-	if (WARN_ON(err))
-		return;
-
-	ttccs->xttc.base_addr = base + reg * 4;
-
-	ttccs->cs.name = np->name;
-	ttccs->cs.rating = 200;
-	ttccs->cs.read = __xttc_clocksource_read;
-	ttccs->cs.mask = CLOCKSOURCE_MASK(16);
-	ttccs->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
-
-	__raw_writel(0x0,  ttccs->xttc.base_addr + XTTCPS_IER_OFFSET);
-	__raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
-		     ttccs->xttc.base_addr + XTTCPS_CLK_CNTRL_OFFSET);
-	__raw_writel(CNT_CNTRL_RESET,
-		     ttccs->xttc.base_addr + XTTCPS_CNT_CNTRL_OFFSET);
-
-	err = clocksource_register_hz(&ttccs->cs, clk_get_rate(clk) / PRESCALE);
-	if (WARN_ON(err))
-		return;
-}
-
-static void __init zynq_ttc_setup_clockevent(struct device_node *np,
-					    void __iomem *base)
-{
-	struct xttcps_timer_clockevent *ttcce;
-	int err, irq;
-	u32 reg;
-
-	ttcce = kzalloc(sizeof(*ttcce), GFP_KERNEL);
-	if (WARN_ON(!ttcce))
-		return;
-
-	err = of_property_read_u32(np, "reg", &reg);
-	if (WARN_ON(err))
-		return;
-
-	ttcce->xttc.base_addr = base + reg * 4;
-
-	ttcce->clk = of_clk_get_by_name(np, "cpu_1x");
-	if (WARN_ON(IS_ERR(ttcce->clk)))
-		return;
-
-	err = clk_prepare_enable(ttcce->clk);
-	if (WARN_ON(err))
-		return;
-
-	irq = irq_of_parse_and_map(np, 0);
-	if (WARN_ON(!irq))
-		return;
-
-	ttcce->ce.name = np->name;
-	ttcce->ce.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
-	ttcce->ce.set_next_event = xttcps_set_next_event;
-	ttcce->ce.set_mode = xttcps_set_mode;
-	ttcce->ce.rating = 200;
-	ttcce->ce.irq = irq;
-	ttcce->ce.cpumask = cpu_possible_mask;
-
-	__raw_writel(0x23, ttcce->xttc.base_addr + XTTCPS_CNT_CNTRL_OFFSET);
-	__raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
-		     ttcce->xttc.base_addr + XTTCPS_CLK_CNTRL_OFFSET);
-	__raw_writel(0x1,  ttcce->xttc.base_addr + XTTCPS_IER_OFFSET);
-
-	err = request_irq(irq, xttcps_clock_event_interrupt, IRQF_TIMER,
-			  np->name, ttcce);
-	if (WARN_ON(err))
-		return;
-
-	clockevents_config_and_register(&ttcce->ce,
-					clk_get_rate(ttcce->clk) / PRESCALE,
-					1, 0xfffe);
-}
-
-static const __initconst struct of_device_id zynq_ttc_match[] = {
-	{ .compatible = "xlnx,ttc-counter-clocksource",
-		.data = zynq_ttc_setup_clocksource, },
-	{ .compatible = "xlnx,ttc-counter-clockevent",
-		.data = zynq_ttc_setup_clockevent, },
-	{}
-};
-
-/**
- * xttcps_timer_init - Initialize the timer
- *
- * Initializes the timer hardware and register the clock source and clock event
- * timers with Linux kernal timer framework
- **/
-void __init xttcps_timer_init(void)
-{
-	struct device_node *np;
-
-	for_each_compatible_node(np, NULL, "xlnx,ttc") {
-		struct device_node *np_chld;
-		void __iomem *base;
-
-		base = of_iomap(np, 0);
-		if (WARN_ON(!base))
-			return;
-
-		for_each_available_child_of_node(np, np_chld) {
-			int (*cb)(struct device_node *np, void __iomem *base);
-			const struct of_device_id *match;
-
-			match = of_match_node(zynq_ttc_match, np_chld);
-			if (match) {
-				cb = match->data;
-				cb(np_chld, base);
-			}
-		}
-	}
-}

drivers/clocksource/Kconfig

@@ -31,6 +31,9 @@ config SUNXI_TIMER
 config VT8500_TIMER
 	bool
 
+config CADENCE_TTC_TIMER
+	bool
+
 config CLKSRC_NOMADIK_MTU
 	bool
 	depends on (ARCH_NOMADIK || ARCH_U8500)

drivers/clocksource/Makefile

@@ -19,6 +19,7 @@ obj-$(CONFIG_ARCH_BCM2835)	+= bcm2835_timer.o
 obj-$(CONFIG_SUNXI_TIMER)	+= sunxi_timer.o
 obj-$(CONFIG_ARCH_TEGRA)	+= tegra20_timer.o
 obj-$(CONFIG_VT8500_TIMER)	+= vt8500_timer.o
+obj-$(CONFIG_CADENCE_TTC_TIMER)		+= cadence_ttc_timer.o
 
 obj-$(CONFIG_ARM_ARCH_TIMER)		+= arm_arch_timer.o
 obj-$(CONFIG_CLKSRC_METAG_GENERIC)	+= metag_generic.o

drivers/clocksource/bcm2835_timer.c

@@ -95,23 +95,13 @@ static irqreturn_t bcm2835_time_interrupt(int irq, void *dev_id)
 	}
 }
 
-static struct of_device_id bcm2835_time_match[] __initconst = {
-	{ .compatible = "brcm,bcm2835-system-timer" },
-	{}
-};
-
-static void __init bcm2835_timer_init(void)
+static void __init bcm2835_timer_init(struct device_node *node)
 {
-	struct device_node *node;
 	void __iomem *base;
 	u32 freq;
 	int irq;
 	struct bcm2835_timer *timer;
 
-	node = of_find_matching_node(NULL, bcm2835_time_match);
-	if (!node)
-		panic("No bcm2835 timer node");
-
 	base = of_iomap(node, 0);
 	if (!base)
 		panic("Can't remap registers");

drivers/clocksource/clksrc-of.c

@@ -16,6 +16,7 @@
 
 #include <linux/init.h>
 #include <linux/of.h>
+#include <linux/clocksource.h>
 
 extern struct of_device_id __clksrc_of_table[];
 
@@ -26,10 +27,10 @@ void __init clocksource_of_init(void)
 {
 	struct device_node *np;
 	const struct of_device_id *match;
-	void (*init_func)(void);
+	clocksource_of_init_fn init_func;
 
 	for_each_matching_node_and_match(np, __clksrc_of_table, &match) {
 		init_func = match->data;
-		init_func();
+		init_func(np);
 	}
 }

drivers/clocksource/tegra20_timer.c

@@ -154,29 +154,12 @@ static struct irqaction tegra_timer_irq = {
 	.dev_id		= &tegra_clockevent,
 };
 
-static const struct of_device_id timer_match[] __initconst = {
-	{ .compatible = "nvidia,tegra20-timer" },
-	{}
-};
-
-static const struct of_device_id rtc_match[] __initconst = {
-	{ .compatible = "nvidia,tegra20-rtc" },
-	{}
-};
-
-static void __init tegra20_init_timer(void)
+static void __init tegra20_init_timer(struct device_node *np)
 {
-	struct device_node *np;
 	struct clk *clk;
 	unsigned long rate;
 	int ret;
 
-	np = of_find_matching_node(NULL, timer_match);
-	if (!np) {
-		pr_err("Failed to find timer DT node\n");
-		BUG();
-	}
-
 	timer_reg_base = of_iomap(np, 0);
 	if (!timer_reg_base) {
 		pr_err("Can't map timer registers\n");
@@ -200,30 +183,6 @@ static void __init tegra20_init_timer(void)
 
 	of_node_put(np);
 
-	np = of_find_matching_node(NULL, rtc_match);
-	if (!np) {
-		pr_err("Failed to find RTC DT node\n");
-		BUG();
-	}
-
-	rtc_base = of_iomap(np, 0);
-	if (!rtc_base) {
-		pr_err("Can't map RTC registers");
-		BUG();
-	}
-
-	/*
-	 * rtc registers are used by read_persistent_clock, keep the rtc clock
-	 * enabled
-	 */
-	clk = clk_get_sys("rtc-tegra", NULL);
-	if (IS_ERR(clk))
-		pr_warn("Unable to get rtc-tegra clock\n");
-	else
-		clk_prepare_enable(clk);
-
-	of_node_put(np);
-
 	switch (rate) {
 	case 12000000:
 		timer_writel(0x000b, TIMERUS_USEC_CFG);
@@ -259,12 +218,34 @@ static void __init tegra20_init_timer(void)
 	tegra_clockevent.irq = tegra_timer_irq.irq;
 	clockevents_config_and_register(&tegra_clockevent, 1000000,
 					0x1, 0x1fffffff);
-#ifdef CONFIG_HAVE_ARM_TWD
-	twd_local_timer_of_register();
-#endif
+}
+CLOCKSOURCE_OF_DECLARE(tegra20_timer, "nvidia,tegra20-timer", tegra20_init_timer);
+
+static void __init tegra20_init_rtc(struct device_node *np)
+{
+	struct clk *clk;
+
+	rtc_base = of_iomap(np, 0);
+	if (!rtc_base) {
+		pr_err("Can't map RTC registers");
+		BUG();
+	}
+
+	/*
+	 * rtc registers are used by read_persistent_clock, keep the rtc clock
+	 * enabled
+	 */
+	clk = clk_get_sys("rtc-tegra", NULL);
+	if (IS_ERR(clk))
+		pr_warn("Unable to get rtc-tegra clock\n");
+	else
+		clk_prepare_enable(clk);
+
+	of_node_put(np);
+
 	register_persistent_clock(NULL, tegra_read_persistent_clock);
 }
-CLOCKSOURCE_OF_DECLARE(tegra20, "nvidia,tegra20-timer", tegra20_init_timer);
+CLOCKSOURCE_OF_DECLARE(tegra20_rtc, "nvidia,tegra20-rtc", tegra20_init_rtc);
 
 #ifdef CONFIG_PM
 static u32 usec_config;

drivers/clocksource/vt8500_timer.c

@@ -129,22 +129,10 @@ static struct irqaction irq = {
 	.dev_id  = &clockevent,
 };
 
-static struct of_device_id vt8500_timer_ids[] = {
-	{ .compatible = "via,vt8500-timer" },
-	{ }
-};
-
-static void __init vt8500_timer_init(void)
+static void __init vt8500_timer_init(struct device_node *np)
 {
-	struct device_node *np;
 	int timer_irq;
 
-	np = of_find_matching_node(NULL, vt8500_timer_ids);
-	if (!np) {
-		pr_err("%s: Timer description missing from Device Tree\n",
-								__func__);
-		return;
-	}
 	regbase = of_iomap(np, 0);
 	if (!regbase) {
 		pr_err("%s: Missing iobase description in Device Tree\n",
@@ -177,4 +165,4 @@ static void __init vt8500_timer_init(void)
 					4, 0xf0000000);
 }
 
-CLOCKSOURCE_OF_DECLARE(vt8500, "via,vt8500-timer", vt8500_timer_init)
+CLOCKSOURCE_OF_DECLARE(vt8500, "via,vt8500-timer", vt8500_timer_init);

include/linux/clocksource.h

@@ -332,15 +332,23 @@ extern int clocksource_mmio_init(void __iomem *, const char *,
 
 extern int clocksource_i8253_init(void);
 
+struct device_node;
+typedef void(*clocksource_of_init_fn)(struct device_node *);
 #ifdef CONFIG_CLKSRC_OF
 extern void clocksource_of_init(void);
 
 #define CLOCKSOURCE_OF_DECLARE(name, compat, fn)			\
 	static const struct of_device_id __clksrc_of_table_##name	\
 		__used __section(__clksrc_of_table)			\
-		 = { .compatible = compat, .data = fn };
+		 = { .compatible = compat,				\
+		     .data = (fn == (clocksource_of_init_fn)NULL) ? fn : fn }
 #else
-#define CLOCKSOURCE_OF_DECLARE(name, compat, fn)
+static inline void clocksource_of_init(void) {}
+#define CLOCKSOURCE_OF_DECLARE(name, compat, fn)			\
+	static const struct of_device_id __clksrc_of_table_##name	\
+		__attribute__((unused))					\
+		 = { .compatible = compat,				\
+		     .data = (fn == (clocksource_of_init_fn)NULL) ? fn : fn }
 #endif
 
 #endif /* _LINUX_CLOCKSOURCE_H */