Skip to content

L
linux
Commit 6b5bf509 authored by Yoichi Yuasa's avatar Yoichi Yuasa Committed by Ralf Baechle
Browse files
Options

[MIPS] EV64120: Remove support 

Signed-off-by: default avatarYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 36de48de
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 2 additions and 1708 deletions
arch/mips/Kconfig
View file @ 6b5bf509
......@@ -88,24 +88,6 @@ config MACH_DECSTATION
otherwise choose R3000.
config MIPS_EV64120
bool "Galileo EV64120 Evaluation board (EXPERIMENTAL)"
depends on EXPERIMENTAL
select DMA_NONCOHERENT
select HW_HAS_PCI
select PCI_GT64XXX_PCI0
select SYS_HAS_CPU_R5000
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_KGDB
help
This is an evaluation board based on the Galileo GT-64120
single-chip system controller that contains a MIPS R5000 compatible
core running at 75/100MHz. Their website is located at
<http://www.marvell.com/>. Say Y here if you wish to build a
kernel for this platform.
config MACH_JAZZ
bool "Jazz family of machines"
select ARC
......@@ -661,7 +643,6 @@ endchoice
source "arch/mips/au1000/Kconfig"
source "arch/mips/ddb5xxx/Kconfig"
source "arch/mips/gt64120/ev64120/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/lasat/Kconfig"
source "arch/mips/pmc-sierra/Kconfig"
......@@ -884,19 +865,11 @@ config SERIAL_RM9000
#
choice
prompt "Galileo Chip Clock"
#default SYSCLK_83 if MIPS_EV64120
depends on MIPS_EV64120 || MOMENCO_OCELOT
default SYSCLK_83 if MIPS_EV64120
depends on MOMENCO_OCELOT
default SYSCLK_100 if MOMENCO_OCELOT
config SYSCLK_75
bool "75" if MIPS_EV64120
config SYSCLK_83
bool "83.3" if MIPS_EV64120
config SYSCLK_100
bool "100" if MIPS_EV64120 || MOMENCO_OCELOT
bool "100" if MOMENCO_OCELOT
endchoice
......
arch/mips/Makefile
View file @ 6b5bf509
......@@ -282,14 +282,6 @@ libs-$(CONFIG_MACH_DECSTATION) += arch/mips/dec/prom/
load-$(CONFIG_MACH_DECSTATION) += 0xffffffff80040000
CLEAN_FILES += drivers/tc/lk201-map.c
#
# Galileo EV64120 Board
#
core-$(CONFIG_MIPS_EV64120) += arch/mips/gt64120/ev64120/
core-$(CONFIG_MIPS_EV64120) += arch/mips/gt64120/common/
cflags-$(CONFIG_MIPS_EV64120) += -Iinclude/asm-mips/mach-ev64120
load-$(CONFIG_MIPS_EV64120) += 0xffffffff80100000
#
# Wind River PPMC Board (4KC + GT64120)
#
......
arch/mips/configs/atlas_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
CONFIG_MIPS_ATLAS=y
......
arch/mips/configs/bigsur_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/capcella_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/cobalt_defconfig
View file @ 6b5bf509
......@@ -12,7 +12,6 @@ CONFIG_MIPS=y
# CONFIG_BASLER_EXCITE is not set
CONFIG_MIPS_COBALT=y
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/db1000_defconfig
View file @ 6b5bf509
......@@ -26,7 +26,6 @@ CONFIG_MIPS_DB1000=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/db1100_defconfig
View file @ 6b5bf509
......@@ -26,7 +26,6 @@ CONFIG_MIPS_DB1100=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/db1200_defconfig
View file @ 6b5bf509
......@@ -26,7 +26,6 @@ CONFIG_MIPS_DB1200=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/db1500_defconfig
View file @ 6b5bf509
......@@ -26,7 +26,6 @@ CONFIG_MIPS_DB1500=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/db1550_defconfig
View file @ 6b5bf509
......@@ -26,7 +26,6 @@ CONFIG_MIPS_DB1550=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/ddb5477_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/decstation_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
CONFIG_MACH_DECSTATION=y
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/e55_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/emma2rh_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/ev64120_defconfig deleted 100644 → 0
View file @ 36de48de
This diff is collapsed.
arch/mips/configs/excite_defconfig
View file @ 6b5bf509
......@@ -26,7 +26,6 @@ CONFIG_BASLER_EXCITE=y
# CONFIG_BASLER_EXCITE_PROTOTYPE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/ip22_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/ip27_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/ip32_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/jazz_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
CONFIG_MACH_JAZZ=y
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/jmr3927_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/lasat200_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
CONFIG_LASAT=y
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/malta_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/mipssim_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/mpc30x_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/ocelot_3_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/ocelot_c_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/ocelot_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/pb1100_defconfig
View file @ 6b5bf509
......@@ -26,7 +26,6 @@ CONFIG_MIPS_PB1100=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/pb1500_defconfig
View file @ 6b5bf509
......@@ -26,7 +26,6 @@ CONFIG_MIPS_PB1500=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/pb1550_defconfig
View file @ 6b5bf509
......@@ -26,7 +26,6 @@ CONFIG_MIPS_PB1550=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/pnx8550-jbs_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/pnx8550-stb810_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/qemu_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/rbhma4200_defconfig
View file @ 6b5bf509
......@@ -24,7 +24,6 @@ CONFIG_MIPS=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/rbhma4500_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/rm200_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/sb1250-swarm_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/sead_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/tb0219_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/tb0226_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/tb0287_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/workpad_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/wrppmc_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/configs/yosemite_defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/defconfig
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MIPS_EV64120 is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_MIPS_ATLAS is not set
......
arch/mips/gt64120/ev64120/Kconfig deleted 100644 → 0
View file @ 36de48de
config EVB_PCI1
bool "Enable Second PCI (PCI1)"
depends on MIPS_EV64120
arch/mips/gt64120/ev64120/Makefile deleted 100644 → 0
View file @ 36de48de
#
# Copyright 2000 RidgeRun, Inc.
# Author: RidgeRun, Inc.
# glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
#
# Makefile for the Galileo EV64120 board.
#
obj-y += irq.o promcon.o reset.o serialGT.o setup.o
arch/mips/gt64120/ev64120/irq.c deleted 100644 → 0
View file @ 36de48de
/*
* BRIEF MODULE DESCRIPTION
* Code to handle irqs on GT64120A boards
* Derived from mips/orion and Cort <cort@fsmlabs.com>
*
* Copyright (C) 2000 RidgeRun, Inc.
* Author: RidgeRun, Inc.
* glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/kernel_stat.h>
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/timex.h>
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/bitops.h>
#include <asm/bootinfo.h>
#include <asm/io.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
#include <asm/gt64120.h>
asmlinkage void plat_irq_dispatch(void)
{
unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
if (pending & STATUSF_IP4) /* int2 hardware line (timer) */
do_IRQ(4);
else if (pending & STATUSF_IP2) /* int0 hardware line */
do_IRQ(GT_INTA);
else if (pending & STATUSF_IP5) /* int3 hardware line */
do_IRQ(GT_INTD);
else if (pending & STATUSF_IP6) /* int4 hardware line */
do_IRQ(6);
else if (pending & STATUSF_IP7) /* compare int */
do_IRQ(7);
else
spurious_interrupt();
}
static void disable_ev64120_irq(unsigned int irq_nr)
{
if (irq_nr >= 8) { // All PCI interrupts are on line 5 or 2
clear_c0_status(9 << 10);
} else {
clear_c0_status(1 << (irq_nr + 8));
}
}
static void enable_ev64120_irq(unsigned int irq_nr)
{
if (irq_nr >= 8) // All PCI interrupts are on line 5 or 2
set_c0_status(9 << 10);
else
set_c0_status(1 << (irq_nr + 8));
}
static void end_ev64120_irq(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
enable_ev64120_irq(irq);
}
static struct irq_chip ev64120_irq_type = {
.name = "EV64120",
.ack = disable_ev64120_irq,
.mask = disable_ev64120_irq,
.mask_ack = disable_ev64120_irq,
.unmask = enable_ev64120_irq,
.end = end_ev64120_irq,
};
void gt64120_irq_setup(void)
{
/*
* Clear all of the interrupts while we change the able around a bit.
*/
clear_c0_status(ST0_IM);
/*
* Enable timer. Other interrupts will be enabled as they are
* registered.
*/
set_c0_status(IE_IRQ2);
}
void __init arch_init_irq(void)
{
gt64120_irq_setup();
}
arch/mips/gt64120/ev64120/promcon.c deleted 100644 → 0
View file @ 36de48de
/*
* Wrap-around code for a console using the
* SGI PROM io-routines.
*
* Copyright (c) 1999 Ulf Carlsson
*
* Derived from DECstation promcon.c
* Copyright (c) 1998 Harald Koerfgen
*/
#include <linux/tty.h>
#include <linux/init.h>
#include <linux/console.h>
static void prom_console_write(struct console *co, const char *s,
unsigned count)
{
extern int CONSOLE_CHANNEL; // The default serial port
unsigned i;
for (i = 0; i < count; i++) {
if (*s == 10)
serial_putc(CONSOLE_CHANNEL, 13);
serial_putc(CONSOLE_CHANNEL, *s++);
}
}
static struct console sercons = {
.name = "ttyS",
.write = prom_console_write,
.flags = CON_PRINTBUFFER,
.index = -1,
};
/*
* Register console.
*/
static int gal_serial_console_init(void)
{
// serial_init();
//serial_set(115200);
register_console(&sercons);
return 0;
}
console_initcall(gal_serial_console_init);
arch/mips/gt64120/ev64120/reset.c deleted 100644 → 0
View file @ 36de48de
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1997 Ralf Baechle
*/
#include <linux/sched.h>
#include <linux/mm.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
#include <asm/reboot.h>
#include <asm/system.h>
void galileo_machine_restart(char *command)
{
*(volatile char *) 0xbc000000 = 0x0f;
/*
* Ouch, we're still alive ... This time we take the silver bullet ...
* ... and find that we leave the hardware in a state in which the
* kernel in the flush locks up somewhen during of after the PCI
* detection stuff.
*/
set_c0_status(ST0_BEV | ST0_ERL);
change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
flush_cache_all();
write_c0_wired(0);
__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
}
void galileo_machine_halt(void)
{
printk(KERN_NOTICE "You can safely turn off the power\n");
while (1)
__asm__(".set\tmips3\n\t"
"wait\n\t"
".set\tmips0");
}
void galileo_machine_power_off(void)
{
galileo_machine_halt();
}
arch/mips/gt64120/ev64120/serialGT.c deleted 100644 → 0
View file @ 36de48de
/*
* serialGT.c
*
* BRIEF MODULE DESCRIPTION
* Low Level Serial Port control for use
* with the Galileo EVB64120A MIPS eval board and
* its on board two channel 16552 Uart.
*
* Copyright (C) 2000 RidgeRun, Inc.
* Author: RidgeRun, Inc.
* glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
// Note:
// Serial CHANNELS - 0 is the bottom connector of evb64120A.
// (The one that maps to the "B" channel of the
// board's uart)
// 1 is the top connector of evb64120A.
// (The one that maps to the "A" channel of the
// board's uart)
int DEBUG_CHANNEL = 0; // See Note Above
int CONSOLE_CHANNEL = 1; // See Note Above
#define DUART 0xBD000000 /* Base address of Uart. */
#define CHANNELOFFSET 0x20 /* DUART+CHANNELOFFSET gets you to the ChanA
register set of the 16552 Uart device.
DUART+0 gets you to the ChanB register set.
*/
#define DUART_DELTA 0x4
#define FIFO_ENABLE 0x07
#define INT_ENABLE 0x04 /* default interrupt mask */
#define RBR 0x00
#define THR 0x00
#define DLL 0x00
#define IER 0x01
#define DLM 0x01
#define IIR 0x02
#define FCR 0x02
#define LCR 0x03
#define MCR 0x04
#define LSR 0x05
#define MSR 0x06
#define SCR 0x07
#define LCR_DLAB 0x80
#define XTAL 1843200
#define LSR_THRE 0x20
#define LSR_BI 0x10
#define LSR_DR 0x01
#define MCR_LOOP 0x10
#define ACCESS_DELAY 0x10000
/******************************
Routine:
Description:
******************************/
int inreg(int channel, int reg)
{
int val;
val =
*((volatile unsigned char *) DUART +
(channel * CHANNELOFFSET) + (reg * DUART_DELTA));
return val;
}
/******************************
Routine:
Description:
******************************/
void outreg(int channel, int reg, unsigned char val)
{
*((volatile unsigned char *) DUART + (channel * CHANNELOFFSET)
+ (reg * DUART_DELTA)) = val;
}
/******************************
Routine:
Description:
Initialize the device driver.
******************************/
void serial_init(int channel)
{
/*
* Configure active port, (CHANNELOFFSET already set.)
*
* Set 8 bits, 1 stop bit, no parity.
*
* LCR<7> 0 divisor latch access bit
* LCR<6> 0 break control (1=send break)
* LCR<5> 0 stick parity (0=space, 1=mark)
* LCR<4> 0 parity even (0=odd, 1=even)
* LCR<3> 0 parity enable (1=enabled)
* LCR<2> 0 # stop bits (0=1, 1=1.5)
* LCR<1:0> 11 bits per character(00=5, 01=6, 10=7, 11=8)
*/
outreg(channel, LCR, 0x3);
outreg(channel, FCR, FIFO_ENABLE); /* Enable the FIFO */
outreg(channel, IER, INT_ENABLE); /* Enable appropriate interrupts */
}
/******************************
Routine:
Description:
Set the baud rate.
******************************/
void serial_set(int channel, unsigned long baud)
{
unsigned char sav_lcr;
/*
* Enable access to the divisor latches by setting DLAB in LCR.
*
*/
sav_lcr = inreg(channel, LCR);
#if 0
/*
* Set baud rate
*/
outreg(channel, LCR, LCR_DLAB | sav_lcr);
// outreg(DLL,(XTAL/(16*2*(baud))-2));
outreg(channel, DLL, XTAL / (16 * baud));
// outreg(DLM,(XTAL/(16*2*(baud))-2)>>8);
outreg(channel, DLM, (XTAL / (16 * baud)) >> 8);
#else
/*
* Note: Set baud rate, hardcoded here for rate of 115200
* since became unsure of above "baud rate" algorithm (??).
*/
outreg(channel, LCR, 0x83);
outreg(channel, DLM, 0x00); // See note above
outreg(channel, DLL, 0x02); // See note above.
outreg(channel, LCR, 0x03);
#endif
/*
* Restore line control register
*/
outreg(channel, LCR, sav_lcr);
}
/******************************
Routine:
Description:
Transmit a character.
******************************/
void serial_putc(int channel, int c)
{
while ((inreg(channel, LSR) & LSR_THRE) == 0);
outreg(channel, THR, c);
}
/******************************
Routine:
Description:
Read a received character if one is
available. Return -1 otherwise.
******************************/
int serial_getc(int channel)
{
if (inreg(channel, LSR) & LSR_DR) {
return inreg(channel, RBR);
}
return -1;
}
/******************************
Routine:
Description:
Used by embedded gdb client. (example; gdb-stub.c)
******************************/
char getDebugChar()
{
int val;
while ((val = serial_getc(DEBUG_CHANNEL)) == -1); // loop until we get a character in.
return (char) val;
}
/******************************
Routine:
Description:
Used by embedded gdb target. (example; gdb-stub.c)
******************************/
void putDebugChar(char c)
{
serial_putc(DEBUG_CHANNEL, (int) c);
}
arch/mips/gt64120/ev64120/setup.c deleted 100644 → 0
View file @ 36de48de
/*
* Copyright (C) 2000 RidgeRun, Inc.
* Author: RidgeRun, Inc.
* glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/timex.h>
#include <linux/pm.h>
#include <asm/bootinfo.h>
#include <asm/page.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/pci.h>
#include <asm/processor.h>
#include <asm/time.h>
#include <asm/reboot.h>
#include <asm/traps.h>
#include <linux/bootmem.h>
unsigned long gt64120_base = KSEG1ADDR(0x14000000);
/* These functions are used for rebooting or halting the machine*/
extern void galileo_machine_restart(char *command);
extern void galileo_machine_halt(void);
extern void galileo_machine_power_off(void);
/*
*This structure holds pointers to the pci configuration space accesses
*and interrupts allocating routine for device over the PCI
*/
extern struct pci_ops galileo_pci_ops;
void __init prom_free_prom_memory(void)
{
}
/*
* Initializes basic routines and structures pointers, memory size (as
* given by the bios and saves the command line.
*/
void __init plat_mem_setup(void)
{
_machine_restart = galileo_machine_restart;
_machine_halt = galileo_machine_halt;
pm_power_off = galileo_machine_power_off;
set_io_port_base(KSEG1);
}
const char *get_system_type(void)
{
return "Galileo EV64120A";
}
/*
* Kernel arguments passed by the firmware
*
* $a0 - nothing
* $a1 - holds a pointer to the eprom parameters
* $a2 - nothing
*/
void __init prom_init(void)
{
mips_machgroup = MACH_GROUP_GALILEO;
mips_machtype = MACH_EV64120A;
add_memory_region(0, 32 << 20, BOOT_MEM_RAM);
}
arch/mips/pci/Makefile
View file @ 6b5bf509
......@@ -25,7 +25,6 @@ obj-$(CONFIG_DDB5477) += fixup-ddb5477.o pci-ddb5477.o ops-ddb5477.o
obj-$(CONFIG_LASAT) += pci-lasat.o
obj-$(CONFIG_MIPS_ATLAS) += fixup-atlas.o
obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o
obj-$(CONFIG_MIPS_EV64120) += pci-ev64120.o
obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o
obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o
obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o
......
arch/mips/pci/pci-ev64120.c deleted 100644 → 0
View file @ 36de48de
#include <linux/pci.h>
#include <asm/irq.h>
int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
if (!pin)
return 0;
irq = allocate_irqno();
if (irq < 0)
return 0;
return irq;
}
/* Do platform specific device initialization at pci_enable_device() time */
int pcibios_plat_dev_init(struct pci_dev *dev)
{
return 0;
}
include/asm-mips/bootinfo.h
View file @ 6b5bf509
......@@ -108,12 +108,6 @@
#define MACH_GROUP_COSINE 10 /* CoSine Orion */
#define MACH_COSINE_ORION 0
/*
* Valid machtype for group GALILEO
*/
#define MACH_GROUP_GALILEO 11 /* Galileo Eval Boards */
#define MACH_EV64120A 0 /* EV64120A */
/*
* Valid machtype for group MOMENCO
*/
......
include/asm-mips/mach-ev64120/mach-gt64120.h deleted 100644 → 0
View file @ 36de48de
/*
* This is a direct copy of the ev96100.h file, with a global
* search and replace. The numbers are the same.
*
* The reason I'm duplicating this is so that the 64120/96100
* defines won't be confusing in the source code.
*/
#ifndef __ASM_GALILEO_BOARDS_MIPS_EV64120_H
#define __ASM_GALILEO_BOARDS_MIPS_EV64120_H
/*
* GT64120 config space base address
*/
extern unsigned long gt64120_base;
#define GT64120_BASE (gt64120_base)
/*
* PCI Bus allocation
*/
#define GT_PCI_MEM_BASE 0x12000000UL
#define GT_PCI_MEM_SIZE 0x02000000UL
#define GT_PCI_IO_BASE 0x10000000UL
#define GT_PCI_IO_SIZE 0x02000000UL
#define GT_ISA_IO_BASE PCI_IO_BASE
/*
* Duart I/O ports.
*/
#define EV64120_COM1_BASE_ADDR (0x1d000000 + 0x20)
#define EV64120_COM2_BASE_ADDR (0x1d000000 + 0x00)
/*
* EV64120 interrupt controller register base.
*/
#define EV64120_ICTRL_REGS_BASE (KSEG1ADDR(0x1f000000))
/*
* EV64120 UART register base.
*/
#define EV64120_UART0_REGS_BASE (KSEG1ADDR(EV64120_COM1_BASE_ADDR))
#define EV64120_UART1_REGS_BASE (KSEG1ADDR(EV64120_COM2_BASE_ADDR))
#define EV64120_BASE_BAUD ( 3686400 / 16 )
#define EV64120_UART_IRQ 6
/*
* PCI interrupts will come in on either the INTA or INTD interrups lines,
* which are mapped to the #2 and #5 interrupt pins of the MIPS. On our
* boards, they all either come in on IntD or they all come in on IntA, they
* aren't mixed. There can be numerous PCI interrupts, so we keep a list of the
* "requested" interrupt numbers and go through the list whenever we get an
* IntA/D.
*
* Interrupts < 8 are directly wired to the processor; PCI INTA is 8 and
* INTD is 11.
*/
#define GT_TIMER 4
#define GT_INTA 2
#define GT_INTD 5
#endif /* __ASM_GALILEO_BOARDS_MIPS_EV64120_H */
include/asm-mips/serial.h
View file @ 6b5bf509
......@@ -51,24 +51,6 @@
#define JAZZ_SERIAL_PORT_DEFNS
#endif
/*
* Galileo EV64120 evaluation board
*/
#ifdef CONFIG_MIPS_EV64120
#include <mach-gt64120.h>
#define EV64120_SERIAL_PORT_DEFNS \
{ .baud_base = EV64120_BASE_BAUD, .irq = EV64120_UART_IRQ, \
.flags = STD_COM_FLAGS, \
.iomem_base = EV64120_UART0_REGS_BASE, .iomem_reg_shift = 2, \
.io_type = SERIAL_IO_MEM }, \
{ .baud_base = EV64120_BASE_BAUD, .irq = EV64120_UART_IRQ, \
.flags = STD_COM_FLAGS, \
.iomem_base = EV64120_UART1_REGS_BASE, .iomem_reg_shift = 2, \
.io_type = SERIAL_IO_MEM },
#else
#define EV64120_SERIAL_PORT_DEFNS
#endif
#ifdef CONFIG_HAVE_STD_PC_SERIAL_PORT
#define STD_SERIAL_PORT_DEFNS \
/* UART CLK PORT IRQ FLAGS */ \
......@@ -166,7 +148,6 @@
#define SERIAL_PORT_DFNS \
DDB5477_SERIAL_PORT_DEFNS \
EV64120_SERIAL_PORT_DEFNS \
IP32_SERIAL_PORT_DEFNS \
JAZZ_SERIAL_PORT_DEFNS \
STD_SERIAL_PORT_DEFNS \
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7