Commit 6b642531 authored by Grant Likely's avatar Grant Likely Committed by Paul Mackerras

[POWERPC] Add lite5200 board support to arch/powerpc

Signed-off-by: default avatarGrant Likely <grant.likely@secretlab.ca>
Acked-by: default avatarSylvain Munaut <tnt@246tNt.com>
Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
parent 6065170c
......@@ -423,6 +423,12 @@ config PPC_EFIKA
select PPC_NATIVE
default y
config PPC_LITE5200
bool "Freescale Lite5200 Eval Board"
depends on PPC_MULTIPLATFORM && PPC32
select PPC_MPC52xx
default n
config PPC_PMAC
bool "Apple PowerMac based machines"
depends on PPC_MULTIPLATFORM
......
......@@ -5,4 +5,5 @@ ifeq ($(CONFIG_PPC_MERGE),y)
obj-y += mpc52xx_pic.o mpc52xx_common.o
endif
obj-$(CONFIG_PPC_EFIKA) += efika-setup.o efika-pci.o
obj-$(CONFIG_PPC_EFIKA) += efika-setup.o efika-pci.o
obj-$(CONFIG_PPC_LITE5200) += lite5200.o
/*
* Freescale Lite5200 board support
*
* Written by: Grant Likely <grant.likely@secretlab.ca>
*
* Copyright (C) Secret Lab Technologies Ltd. 2006. All rights reserved.
* Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
*
* Description:
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#undef DEBUG
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/major.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/initrd.h>
#include <asm/system.h>
#include <asm/atomic.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/ipic.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
#include <asm/prom.h>
#include <asm/udbg.h>
#include <sysdev/fsl_soc.h>
#include <asm/qe.h>
#include <asm/qe_ic.h>
#include <asm/of_platform.h>
#include <asm/mpc52xx.h>
/* ************************************************************************
*
* Setup the architecture
*
*/
static void __init
lite52xx_setup_cpu(void)
{
struct mpc52xx_gpio __iomem *gpio;
u32 port_config;
/* Map zones */
gpio = mpc52xx_find_and_map("mpc52xx-gpio");
if (!gpio) {
printk(KERN_ERR __FILE__ ": "
"Error while mapping GPIO register for port config. "
"Expect some abnormal behavior\n");
goto error;
}
/* Set port config */
port_config = in_be32(&gpio->port_config);
port_config &= ~0x00800000; /* 48Mhz internal, pin is GPIO */
port_config &= ~0x00007000; /* USB port : Differential mode */
port_config |= 0x00001000; /* USB 1 only */
port_config &= ~0x03000000; /* ATA CS is on csb_4/5 */
port_config |= 0x01000000;
pr_debug("port_config: old:%x new:%x\n",
in_be32(&gpio->port_config), port_config);
out_be32(&gpio->port_config, port_config);
/* Unmap zone */
error:
iounmap(gpio);
}
static void __init lite52xx_setup_arch(void)
{
struct device_node *np;
if (ppc_md.progress)
ppc_md.progress("lite52xx_setup_arch()", 0);
np = of_find_node_by_type(NULL, "cpu");
if (np) {
unsigned int *fp =
(int *)get_property(np, "clock-frequency", NULL);
if (fp != 0)
loops_per_jiffy = *fp / HZ;
else
loops_per_jiffy = 50000000 / HZ;
of_node_put(np);
}
/* CPU & Port mux setup */
mpc52xx_setup_cpu(); /* Generic */
lite52xx_setup_cpu(); /* Platorm specific */
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
ROOT_DEV = Root_RAM0;
else
#endif
#ifdef CONFIG_ROOT_NFS
ROOT_DEV = Root_NFS;
#else
ROOT_DEV = Root_HDA1;
#endif
}
void lite52xx_show_cpuinfo(struct seq_file *m)
{
struct device_node* np = of_find_all_nodes(NULL);
const char *model = NULL;
if (np)
model = get_property(np, "model", NULL);
seq_printf(m, "vendor\t\t: Freescale Semiconductor\n");
seq_printf(m, "machine\t\t: %s\n", model ? model : "unknown");
of_node_put(np);
}
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
static int __init lite52xx_probe(void)
{
unsigned long node = of_get_flat_dt_root();
const char *model = of_get_flat_dt_prop(node, "model", NULL);
if (!of_flat_dt_is_compatible(node, "lite52xx"))
return 0;
pr_debug("%s board w/ mpc52xx found\n", model ? model : "unknown");
return 1;
}
define_machine(lite52xx) {
.name = "lite52xx",
.probe = lite52xx_probe,
.setup_arch = lite52xx_setup_arch,
.init_IRQ = mpc52xx_init_irq,
.get_irq = mpc52xx_get_irq,
.show_cpuinfo = lite52xx_show_cpuinfo,
.calibrate_decr = generic_calibrate_decr,
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment