RDMA/bnxt_re: Check if the vlan is valid before reporting

When VF is configured with default vlan, HW strips the vlan from the
packet and driver receives it in Rx completion. VLAN needs to be reported
for UD work completion only if the vlan is configured on the host. Add a
check for valid vlan in the UD receive path.

Link: https://lore.kernel.org/r/1631709163-2287-12-git-send-email-selvin.xavier@broadcom.comSigned-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

drivers/infiniband/hw/bnxt_re/ib_verbs.c

@@ -3365,8 +3365,11 @@ static void bnxt_re_process_res_ud_wc(struct bnxt_re_qp *qp,
 				      struct ib_wc *wc,
 				      struct bnxt_qplib_cqe *cqe)
 {
+	struct bnxt_re_dev *rdev;
+	u16 vlan_id = 0;
 	u8 nw_type;
 
+	rdev = qp->rdev;
 	wc->opcode = IB_WC_RECV;
 	wc->status = __rc_to_ib_wc_status(cqe->status);
 
@@ -3378,9 +3381,12 @@ static void bnxt_re_process_res_ud_wc(struct bnxt_re_qp *qp,
 		memcpy(wc->smac, cqe->smac, ETH_ALEN);
 		wc->wc_flags |= IB_WC_WITH_SMAC;
 		if (cqe->flags & CQ_RES_UD_FLAGS_META_FORMAT_VLAN) {
-			wc->vlan_id = (cqe->cfa_meta & 0xFFF);
-			if (wc->vlan_id < 0x1000)
-				wc->wc_flags |= IB_WC_WITH_VLAN;
+			vlan_id = (cqe->cfa_meta & 0xFFF);
+		}
+		/* Mark only if vlan_id is non zero */
+		if (vlan_id && bnxt_re_check_if_vlan_valid(rdev, vlan_id)) {
+			wc->vlan_id = vlan_id;
+			wc->wc_flags |= IB_WC_WITH_VLAN;
 		}
 		nw_type = (cqe->flags & CQ_RES_UD_FLAGS_ROCE_IP_VER_MASK) >>
 			   CQ_RES_UD_FLAGS_ROCE_IP_VER_SFT;