V4L/DVB (13002): Adds support for Zolid Hybrid PCI card:

http://linuxtv.org/wiki/index.php/Zolid_Hybrid_TV_Tuner

test status analog (PAL-B):
- Sometimes picture is noisy, but it becomes crystal clear after
  switching between channels. (happens for example at 687.25 Mhz)
- On a lower frequency (511.25 Mhz) the picture is always sharp, but
  lacks colour.
- No sound problems.
- radio untested.

Digital:
- DVB-T/H stream reception works.
- Would expect to see some more channels in the higher frequency region.

Overall is the impression that sensitivity still needs improvement
both in analog and digital modes.
Signed-off-by: Henk Vergonet <Henk.Vergonet@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Documentation/video4linux/CARDLIST.saa7134

@@ -171,3 +171,4 @@
 170 -> AverMedia AverTV Studio 505              [1461:a115]
 171 -> Beholder BeholdTV X7                     [5ace:7595]
 172 -> RoverMedia TV Link Pro FM                [19d1:0138]
+173 -> Zolid Hybrid TV Tuner PCI                [1131:2004]

drivers/media/video/saa7134/saa7134-cards.c

@@ -5257,6 +5257,27 @@ struct saa7134_board saa7134_boards[] = {
 			.amux = TV,
 		},
 	},
+	[SAA7134_BOARD_ZOLID_HYBRID_PCI] = {
+		.name           = "Zolid Hybrid TV Tuner PCI",
+		.audio_clock    = 0x00187de7,
+		.tuner_type     = TUNER_PHILIPS_TDA8290,
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.tuner_config   = 0,
+		.mpeg           = SAA7134_MPEG_DVB,
+		.ts_type	= SAA7134_MPEG_TS_PARALLEL,
+		.inputs         = {{
+			.name = name_tv,
+			.vmux = 1,
+			.amux = TV,
+			.tv   = 1,
+		} },
+		.radio = {	/* untested */
+			.name = name_radio,
+			.amux = TV,
+		},
+	},
 
 };
 
@@ -6389,6 +6410,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
 		.subvendor    = 0x19d1, /* RoverMedia */
 		.subdevice    = 0x0138, /* LifeView FlyTV Prime30 OEM */
 		.driver_data  = SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM,
+	}, {
+		.vendor       = PCI_VENDOR_ID_PHILIPS,
+		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
+		.subvendor    = PCI_VENDOR_ID_PHILIPS,
+		.subdevice    = 0x2004,
+		.driver_data  = SAA7134_BOARD_ZOLID_HYBRID_PCI,
 	}, {
 		/* --- boards without eeprom + subsystem ID --- */
 		.vendor       = PCI_VENDOR_ID_PHILIPS,

drivers/media/video/saa7134/saa7134-dvb.c

@@ -1014,6 +1014,22 @@ static struct tda829x_config tda829x_no_probe = {
 	.probe_tuner = TDA829X_DONT_PROBE,
 };
 
+static struct tda10048_config zolid_tda10048_config = {
+	.demod_address    = 0x10 >> 1,
+	.output_mode      = TDA10048_PARALLEL_OUTPUT,
+	.fwbulkwritelen   = TDA10048_BULKWRITE_200,
+	.inversion        = TDA10048_INVERSION_ON,
+	.dtv6_if_freq_khz = TDA10048_IF_3300,
+	.dtv7_if_freq_khz = TDA10048_IF_3500,
+	.dtv8_if_freq_khz = TDA10048_IF_4000,
+	.clk_freq_khz     = TDA10048_CLK_16000,
+	.disable_gate_access = 1,
+};
+
+static struct tda18271_config zolid_tda18271_config = {
+	.gate    = TDA18271_GATE_ANALOG,
+};
+
 /* ==================================================================
  * Core code
  */
@@ -1488,6 +1504,19 @@ static int dvb_init(struct saa7134_dev *dev)
 				wprintk("%s: No zl10039 found!\n",
 					__func__);
 
+		break;
+	case SAA7134_BOARD_ZOLID_HYBRID_PCI:
+		fe0->dvb.frontend = dvb_attach(tda10048_attach,
+					       &zolid_tda10048_config,
+					       &dev->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(tda829x_attach, fe0->dvb.frontend,
+				   &dev->i2c_adap, 0x4b,
+				   &tda829x_no_probe);
+			dvb_attach(tda18271_attach, fe0->dvb.frontend,
+				   0x60, &dev->i2c_adap,
+				   &zolid_tda18271_config);
+		}
 		break;
 	default:
 		wprintk("Huh? unknown DVB card?\n");

drivers/media/video/saa7134/saa7134.h

@@ -296,6 +296,7 @@ struct saa7134_format {
 #define SAA7134_BOARD_AVERMEDIA_STUDIO_505  170
 #define SAA7134_BOARD_BEHOLD_X7             171
 #define SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM 172
+#define SAA7134_BOARD_ZOLID_HYBRID_PCI		173
 
 #define SAA7134_MAXBOARDS 32
 #define SAA7134_INPUT_MAX 8