Commit 6c713a3a authored by Andrew Lunn's avatar Andrew Lunn Committed by David S. Miller

net: dsa: mv88e6xxx: Add eeprom-length to binding

The binding documentation for the mv88e6xxx switch is missing the
eeprom-length property, which has been implemented since May 2016,
commit f8cd8753 ("dsa: mv88e6xxx: Handle eeprom-length property")
Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent e2a9aa5a
...@@ -26,6 +26,10 @@ Optional properties: ...@@ -26,6 +26,10 @@ Optional properties:
- interrupt-controller : Indicates the switch is itself an interrupt - interrupt-controller : Indicates the switch is itself an interrupt
controller. This is used for the PHY interrupts. controller. This is used for the PHY interrupts.
#interrupt-cells = <2> : Controller uses two cells, number and flag #interrupt-cells = <2> : Controller uses two cells, number and flag
- eeprom-length : Set to the length of an EEPROM connected to the
switch. Must be set if the switch can not detect
the presence and/or size of a connected EEPROM,
otherwise optional.
- mdio : Container of PHY and devices on the switches MDIO - mdio : Container of PHY and devices on the switches MDIO
bus. bus.
- mdio? : Container of PHYs and devices on the external MDIO - mdio? : Container of PHYs and devices on the external MDIO
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment