Commit 6cbdcf25 authored by Vladimir Oltean's avatar Vladimir Oltean Committed by David S. Miller

net: phylink: Allow 2.5BASE-T, 5GBASE-T and 10GBASE-T for the 10G link modes

For some reason, PHYLINK does not put the copper modes for 802.3bz
(NBASE-T) and 802.3an-2006 (10GBASE-T) in the PHY's supported mask, when
the PHY-MAC connection is a 10G-capable one (10GBase-KR, 10GBase-R,
USXGMII). One possible way through which the cable side can work at the
lower speed is by having the PHY emit PAUSE frames towards the MAC. So
fix that omission.

Also include the 2500Base-X fiber mode in this list while we're at it.
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent a47b9e15
...@@ -307,6 +307,10 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode) ...@@ -307,6 +307,10 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode)
phylink_set(pl->supported, 1000baseT_Half); phylink_set(pl->supported, 1000baseT_Half);
phylink_set(pl->supported, 1000baseT_Full); phylink_set(pl->supported, 1000baseT_Full);
phylink_set(pl->supported, 1000baseX_Full); phylink_set(pl->supported, 1000baseX_Full);
phylink_set(pl->supported, 2500baseT_Full);
phylink_set(pl->supported, 2500baseX_Full);
phylink_set(pl->supported, 5000baseT_Full);
phylink_set(pl->supported, 10000baseT_Full);
phylink_set(pl->supported, 10000baseKR_Full); phylink_set(pl->supported, 10000baseKR_Full);
phylink_set(pl->supported, 10000baseCR_Full); phylink_set(pl->supported, 10000baseCR_Full);
phylink_set(pl->supported, 10000baseSR_Full); phylink_set(pl->supported, 10000baseSR_Full);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment