Commit 6cbe7cd1 authored by Marco Felsch's avatar Marco Felsch Committed by Thierry Reding

drm/panel: simple: Add DLC1010GIG panel

Add support for the DLC DLC1010GIG 1280x800 10.1" LVDS panel to the
simple-panel driver.
Signed-off-by: default avatarMarco Felsch <m.felsch@pengutronix.de>
Signed-off-by: default avatarThierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180924152610.25939-1-m.felsch@pengutronix.de
parent 7ad8b41c
DLC Display Co. DLC1010GIG 10.1" WXGA TFT LCD Panel
Required properties:
- compatible: should be "dlc,dlc1010gig"
- power-supply: See simple-panel.txt
Optional properties:
- enable-gpios: See simple-panel.txt
- backlight: See simple-panel.txt
This binding is compatible with the simple-panel binding, which is specified
in simple-panel.txt in this directory.
......@@ -1032,6 +1032,36 @@ static const struct panel_desc dlc_dlc0700yzg_1 = {
.bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,
};
static const struct display_timing dlc_dlc1010gig_timing = {
.pixelclock = { 68900000, 71100000, 73400000 },
.hactive = { 1280, 1280, 1280 },
.hfront_porch = { 43, 53, 63 },
.hback_porch = { 43, 53, 63 },
.hsync_len = { 44, 54, 64 },
.vactive = { 800, 800, 800 },
.vfront_porch = { 5, 8, 11 },
.vback_porch = { 5, 8, 11 },
.vsync_len = { 5, 7, 11 },
.flags = DISPLAY_FLAGS_DE_HIGH,
};
static const struct panel_desc dlc_dlc1010gig = {
.timings = &dlc_dlc1010gig_timing,
.num_timings = 1,
.bpc = 8,
.size = {
.width = 216,
.height = 135,
},
.delay = {
.prepare = 60,
.enable = 150,
.disable = 100,
.unprepare = 60,
},
.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
};
static const struct drm_display_mode edt_et057090dhu_mode = {
.clock = 25175,
.hdisplay = 640,
......@@ -2470,6 +2500,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "dlc,dlc0700yzg-1",
.data = &dlc_dlc0700yzg_1,
}, {
.compatible = "dlc,dlc1010gig",
.data = &dlc_dlc1010gig,
}, {
.compatible = "edt,et057090dhu",
.data = &edt_et057090dhu,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment