Merge branch 'x86/apic' into irq/numa

Merge reason: both topics modify the APIC code but were able to do it in
              parallel so far. An upcoming patch generates a conflict so
              merge them to avoid the conflict.
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Documentation/DocBook/Makefile

@@ -143,7 +143,8 @@ quiet_cmd_db2pdf = PDF     $@
 	$(call cmd,db2pdf)
 
 
-main_idx = Documentation/DocBook/index.html
+index = index.html
+main_idx = Documentation/DocBook/$(index)
 build_main_index = rm -rf $(main_idx) && \
 		   echo '<h1>Linux Kernel HTML Documentation</h1>' >> $(main_idx) && \
 		   echo '<h2>Kernel Version: $(KERNELVERSION)</h2>' >> $(main_idx) && \
@@ -232,7 +233,7 @@ clean-files := $(DOCBOOKS) \
 	$(patsubst %.xml, %.pdf,  $(DOCBOOKS)) \
 	$(patsubst %.xml, %.html, $(DOCBOOKS)) \
 	$(patsubst %.xml, %.9,    $(DOCBOOKS)) \
-	$(C-procfs-example)
+	$(C-procfs-example) $(index)
 
 clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) man
 

Documentation/DocBook/kernel-api.tmpl

@@ -190,16 +190,20 @@ X!Ekernel/module.c
 !Edrivers/pci/pci.c
 !Edrivers/pci/pci-driver.c
 !Edrivers/pci/remove.c
-!Edrivers/pci/pci-acpi.c
 !Edrivers/pci/search.c
 !Edrivers/pci/msi.c
 !Edrivers/pci/bus.c
+!Edrivers/pci/access.c
+!Edrivers/pci/irq.c
+!Edrivers/pci/htirq.c
 <!-- FIXME: Removed for now since no structured comments in source
 X!Edrivers/pci/hotplug.c
 -->
 !Edrivers/pci/probe.c
+!Edrivers/pci/slot.c
 !Edrivers/pci/rom.c
 !Edrivers/pci/iov.c
+!Idrivers/pci/pci-sysfs.c
      </sect1>
      <sect1><title>PCI Hotplug Support Library</title>
 !Edrivers/pci/hotplug/pci_hotplug_core.c

Documentation/filesystems/Locking

@@ -512,16 +512,24 @@ locking rules:
 		BKL	mmap_sem	PageLocked(page)
 open:		no	yes
 close:		no	yes
-fault:		no	yes
-page_mkwrite:	no	yes		no
+fault:		no	yes		can return with page locked
+page_mkwrite:	no	yes		can return with page locked
 access:		no	yes
 
-	->page_mkwrite() is called when a previously read-only page is
-about to become writeable. The file system is responsible for
-protecting against truncate races. Once appropriate action has been
-taking to lock out truncate, the page range should be verified to be
-within i_size. The page mapping should also be checked that it is not
-NULL.
+	->fault() is called when a previously not present pte is about
+to be faulted in. The filesystem must find and return the page associated
+with the passed in "pgoff" in the vm_fault structure. If it is possible that
+the page may be truncated and/or invalidated, then the filesystem must lock
+the page, then ensure it is not already truncated (the page lock will block
+subsequent truncate), and then return with VM_FAULT_LOCKED, and the page
+locked. The VM will unlock the page.
+
+	->page_mkwrite() is called when a previously read-only pte is
+about to become writeable. The filesystem again must ensure that there are
+no truncate/invalidate races, and then return with the page locked. If
+the page has been truncated, the filesystem should not look up a new page
+like the ->fault() handler, but simply return with VM_FAULT_NOPAGE, which
+will cause the VM to retry the fault.
 
 	->access() is called when get_user_pages() fails in
 acces_process_vm(), typically used to debug a process through

Documentation/input/bcm5974.txt

+BCM5974 Driver (bcm5974)
+------------------------
+	Copyright (C) 2008-2009	Henrik Rydberg <rydberg@euromail.se>
+
+The USB initialization and package decoding was made by Scott Shawcroft as
+part of the touchd user-space driver project:
+	Copyright (C) 2008	Scott Shawcroft (scott.shawcroft@gmail.com)
+
+The BCM5974 driver is based on the appletouch driver:
+	Copyright (C) 2001-2004	Greg Kroah-Hartman (greg@kroah.com)
+	Copyright (C) 2005	Johannes Berg (johannes@sipsolutions.net)
+	Copyright (C) 2005	Stelian Pop (stelian@popies.net)
+	Copyright (C) 2005	Frank Arnold (frank@scirocco-5v-turbo.de)
+	Copyright (C) 2005	Peter Osterlund (petero2@telia.com)
+	Copyright (C) 2005	Michael Hanselmann (linux-kernel@hansmi.ch)
+	Copyright (C) 2006	Nicolas Boichat (nicolas@boichat.ch)
+
+This driver adds support for the multi-touch trackpad on the new Apple
+Macbook Air and Macbook Pro laptops. It replaces the appletouch driver on
+those computers, and integrates well with the synaptics driver of the Xorg
+system.
+
+Known to work on Macbook Air, Macbook Pro Penryn and the new unibody
+Macbook 5 and Macbook Pro 5.
+
+Usage
+-----
+
+The driver loads automatically for the supported usb device ids, and
+becomes available both as an event device (/dev/input/event*) and as a
+mouse via the mousedev driver (/dev/input/mice).
+
+USB Race
+--------
+
+The Apple multi-touch trackpads report both mouse and keyboard events via
+different interfaces of the same usb device. This creates a race condition
+with the HID driver, which, if not told otherwise, will find the standard
+HID mouse and keyboard, and claim the whole device. To remedy, the usb
+product id must be listed in the mouse_ignore list of the hid driver.
+
+Debug output
+------------
+
+To ease the development for new hardware version, verbose packet output can
+be switched on with the debug kernel module parameter. The range [1-9]
+yields different levels of verbosity. Example (as root):
+
+echo -n 9 > /sys/module/bcm5974/parameters/debug
+
+tail -f /var/log/debug
+
+echo -n 0 > /sys/module/bcm5974/parameters/debug
+
+Trivia
+------
+
+The driver was developed at the ubuntu forums in June 2008 [1], and now has
+a more permanent home at bitmath.org [2].
+
+Links
+-----
+
+[1] http://ubuntuforums.org/showthread.php?t=840040
+[2] http://http://bitmath.org/code/

Documentation/input/multi-touch-protocol.txt

+Multi-touch (MT) Protocol
+-------------------------
+	Copyright (C) 2009	Henrik Rydberg <rydberg@euromail.se>
+
+
+Introduction
+------------
+
+In order to utilize the full power of the new multi-touch devices, a way to
+report detailed finger data to user space is needed. This document
+describes the multi-touch (MT) protocol which allows kernel drivers to
+report details for an arbitrary number of fingers.
+
+
+Usage
+-----
+
+Anonymous finger details are sent sequentially as separate packets of ABS
+events. Only the ABS_MT events are recognized as part of a finger
+packet. The end of a packet is marked by calling the input_mt_sync()
+function, which generates a SYN_MT_REPORT event. The end of multi-touch
+transfer is marked by calling the usual input_sync() function.
+
+A set of ABS_MT events with the desired properties is defined. The events
+are divided into categories, to allow for partial implementation.  The
+minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
+ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked.  If the
+device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
+of the approaching finger. Anisotropy and direction may be specified with
+ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with
+more granular information may specify general shapes as blobs, i.e., as a
+sequence of rectangular shapes grouped together by an
+ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify
+whether the touching tool is a finger or a pen or something else.
+
+
+Event Semantics
+---------------
+
+The word "contact" is used to describe a tool which is in direct contact
+with the surface. A finger, a pen or a rubber all classify as contacts.
+
+ABS_MT_TOUCH_MAJOR
+
+The length of the major axis of the contact. The length should be given in
+surface units. If the surface has an X times Y resolution, the largest
+possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal.
+
+ABS_MT_TOUCH_MINOR
+
+The length, in surface units, of the minor axis of the contact. If the
+contact is circular, this event can be omitted.
+
+ABS_MT_WIDTH_MAJOR
+
+The length, in surface units, of the major axis of the approaching
+tool. This should be understood as the size of the tool itself. The
+orientation of the contact and the approaching tool are assumed to be the
+same.
+
+ABS_MT_WIDTH_MINOR
+
+The length, in surface units, of the minor axis of the approaching
+tool. Omit if circular.
+
+The above four values can be used to derive additional information about
+the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
+the notion of pressure. The fingers of the hand and the palm all have
+different characteristic widths [1].
+
+ABS_MT_ORIENTATION
+
+The orientation of the ellipse. The value should describe half a revolution
+clockwise around the touch center. The scale of the value is arbitrary, but
+zero should be returned for an ellipse aligned along the Y axis of the
+surface. As an example, an index finger placed straight onto the axis could
+return zero orientation, something negative when twisted to the left, and
+something positive when twisted to the right. This value can be omitted if
+the touching object is circular, or if the information is not available in
+the kernel driver.
+
+ABS_MT_POSITION_X
+
+The surface X coordinate of the center of the touching ellipse.
+
+ABS_MT_POSITION_Y
+
+The surface Y coordinate of the center of the touching ellipse.
+
+ABS_MT_TOOL_TYPE
+
+The type of approaching tool. A lot of kernel drivers cannot distinguish
+between different tool types, such as a finger or a pen. In such cases, the
+event should be omitted. The protocol currently supports MT_TOOL_FINGER and
+MT_TOOL_PEN [2].
+
+ABS_MT_BLOB_ID
+
+The BLOB_ID groups several packets together into one arbitrarily shaped
+contact. This is a low-level anonymous grouping, and should not be confused
+with the high-level contactID, explained below. Most kernel drivers will
+not have this capability, and can safely omit the event.
+
+
+Finger Tracking
+---------------
+
+The kernel driver should generate an arbitrary enumeration of the set of
+anonymous contacts currently on the surface. The order in which the packets
+appear in the event stream is not important.
+
+The process of finger tracking, i.e., to assign a unique contactID to each
+initiated contact on the surface, is left to user space; preferably the
+multi-touch X driver [3]. In that driver, the contactID stays the same and
+unique until the contact vanishes (when the finger leaves the surface). The
+problem of assigning a set of anonymous fingers to a set of identified
+fingers is a euclidian bipartite matching problem at each event update, and
+relies on a sufficiently rapid update rate.
+
+Notes
+-----
+
+In order to stay compatible with existing applications, the data
+reported in a finger packet must not be recognized as single-touch
+events. In addition, all finger data must bypass input filtering,
+since subsequent events of the same type refer to different fingers.
+
+The first kernel driver to utilize the MT protocol is the bcm5974 driver,
+where examples can be found.
+
+[1] With the extension ABS_MT_APPROACH_X and ABS_MT_APPROACH_Y, the
+difference between the contact position and the approaching tool position
+could be used to derive tilt.
+[2] The list can of course be extended.
+[3] The multi-touch X driver is currently in the prototyping stage. At the
+time of writing (April 2009), the MT protocol is not yet merged, and the
+prototype implements finger matching, basic mouse support and two-finger
+scrolling. The project aims at improving the quality of current multi-touch
+functionality available in the synaptics X driver, and in addition
+implement more advanced gestures.

Documentation/isdn/00-INDEX

@@ -2,8 +2,14 @@
 	- this file (info on ISDN implementation for Linux)
 CREDITS
 	- list of the kind folks that brought you this stuff.
+HiSax.cert
+	- information about the ITU approval certification of the HiSax driver.
 INTERFACE
-	- description of Linklevel and Hardwarelevel ISDN interface.
+	- description of isdn4linux Link Level and Hardware Level interfaces.
+INTERFACE.fax
+	- description of the fax subinterface of isdn4linux.
+INTERFACE.CAPI
+	- description of kernel CAPI Link Level to Hardware Level interface.
 README
 	- general info on what you need and what to do for Linux ISDN.
 README.FAQ
@@ -12,6 +18,8 @@ README.audio
 	- info for running audio over ISDN.
 README.fax
 	- info for using Fax over ISDN.
+README.gigaset
+	- info on the drivers for Siemens Gigaset ISDN adapters.
 README.icn
 	- info on the ICN-ISDN-card and its driver.
 README.HiSax
@@ -37,7 +45,8 @@ README.diversion
 README.sc
 	- info on driver for Spellcaster cards.
 README.x25
-    _ info for running X.25 over ISDN.
+	- info for running X.25 over ISDN.
 README.hysdn
-        - info on driver for Hypercope active HYSDN cards
- 
+	- info on driver for Hypercope active HYSDN cards
+README.mISDN
+	- info on the Modular ISDN subsystem (mISDN).

Documentation/isdn/INTERFACE.CAPI

+Kernel CAPI Interface to Hardware Drivers
+-----------------------------------------
+
+1. Overview
+
+From the CAPI 2.0 specification:
+COMMON-ISDN-API (CAPI) is an application programming interface standard used
+to access ISDN equipment connected to basic rate interfaces (BRI) and primary
+rate interfaces (PRI).
+
+Kernel CAPI operates as a dispatching layer between CAPI applications and CAPI
+hardware drivers. Hardware drivers register ISDN devices (controllers, in CAPI
+lingo) with Kernel CAPI to indicate their readiness to provide their service
+to CAPI applications. CAPI applications also register with Kernel CAPI,
+requesting association with a CAPI device. Kernel CAPI then dispatches the
+application registration to an available device, forwarding it to the
+corresponding hardware driver. Kernel CAPI then forwards CAPI messages in both
+directions between the application and the hardware driver.
+
+Format and semantics of CAPI messages are specified in the CAPI 2.0 standard.
+This standard is freely available from http://www.capi.org.
+
+
+2. Driver and Device Registration
+
+CAPI drivers optionally register themselves with Kernel CAPI by calling the
+Kernel CAPI function register_capi_driver() with a pointer to a struct
+capi_driver. This structure must be filled with the name and revision of the
+driver, and optionally a pointer to a callback function, add_card(). The
+registration can be revoked by calling the function unregister_capi_driver()
+with a pointer to the same struct capi_driver.
+
+CAPI drivers must register each of the ISDN devices they control with Kernel
+CAPI by calling the Kernel CAPI function attach_capi_ctr() with a pointer to a
+struct capi_ctr before they can be used. This structure must be filled with
+the names of the driver and controller, and a number of callback function
+pointers which are subsequently used by Kernel CAPI for communicating with the
+driver. The registration can be revoked by calling the function
+detach_capi_ctr() with a pointer to the same struct capi_ctr.
+
+Before the device can be actually used, the driver must fill in the device
+information fields 'manu', 'version', 'profile' and 'serial' in the capi_ctr
+structure of the device, and signal its readiness by calling capi_ctr_ready().
+From then on, Kernel CAPI may call the registered callback functions for the
+device.
+
+If the device becomes unusable for any reason (shutdown, disconnect ...), the
+driver has to call capi_ctr_reseted(). This will prevent further calls to the
+callback functions by Kernel CAPI.
+
+
+3. Application Registration and Communication
+
+Kernel CAPI forwards registration requests from applications (calls to CAPI
+operation CAPI_REGISTER) to an appropriate hardware driver by calling its
+register_appl() callback function. A unique Application ID (ApplID, u16) is
+allocated by Kernel CAPI and passed to register_appl() along with the
+parameter structure provided by the application. This is analogous to the
+open() operation on regular files or character devices.
+
+After a successful return from register_appl(), CAPI messages from the
+application may be passed to the driver for the device via calls to the
+send_message() callback function. The CAPI message to send is stored in the
+data portion of an skb. Conversely, the driver may call Kernel CAPI's
+capi_ctr_handle_message() function to pass a received CAPI message to Kernel
+CAPI for forwarding to an application, specifying its ApplID.
+
+Deregistration requests (CAPI operation CAPI_RELEASE) from applications are
+forwarded as calls to the release_appl() callback function, passing the same
+ApplID as with register_appl(). After return from release_appl(), no CAPI
+messages for that application may be passed to or from the device anymore.
+
+
+4. Data Structures
+
+4.1 struct capi_driver
+
+This structure describes a Kernel CAPI driver itself. It is used in the
+register_capi_driver() and unregister_capi_driver() functions, and contains
+the following non-private fields, all to be set by the driver before calling
+register_capi_driver():
+
+char name[32]
+	the name of the driver, as a zero-terminated ASCII string
+char revision[32]
+	the revision number of the driver, as a zero-terminated ASCII string
+int (*add_card)(struct capi_driver *driver, capicardparams *data)
+	a callback function pointer (may be NULL)
+
+
+4.2 struct capi_ctr
+
+This structure describes an ISDN device (controller) handled by a Kernel CAPI
+driver. After registration via the attach_capi_ctr() function it is passed to
+all controller specific lower layer interface and callback functions to
+identify the controller to operate on.
+
+It contains the following non-private fields:
+
+- to be set by the driver before calling attach_capi_ctr():
+
+struct module *owner
+	pointer to the driver module owning the device
+
+void *driverdata
+	an opaque pointer to driver specific data, not touched by Kernel CAPI
+
+char name[32]
+	the name of the controller, as a zero-terminated ASCII string
+
+char *driver_name
+	the name of the driver, as a zero-terminated ASCII string
+
+int (*load_firmware)(struct capi_ctr *ctrlr, capiloaddata *ldata)
+	(optional) pointer to a callback function for sending firmware and
+	configuration data to the device
+
+void (*reset_ctr)(struct capi_ctr *ctrlr)
+	pointer to a callback function for performing a reset on the device,
+	releasing all registered applications
+
+void (*register_appl)(struct capi_ctr *ctrlr, u16 applid,
+			capi_register_params *rparam)
+void (*release_appl)(struct capi_ctr *ctrlr, u16 applid)
+	pointers to callback functions for registration and deregistration of
+	applications with the device
+
+u16  (*send_message)(struct capi_ctr *ctrlr, struct sk_buff *skb)
+	pointer to a callback function for sending a CAPI message to the
+	device
+
+char *(*procinfo)(struct capi_ctr *ctrlr)
+	pointer to a callback function returning the entry for the device in
+	the CAPI controller info table, /proc/capi/controller
+
+read_proc_t *ctr_read_proc
+	pointer to the read_proc callback function for the device's proc file
+	system entry, /proc/capi/controllers/<n>; will be called with a
+	pointer to the device's capi_ctr structure as the last (data) argument
+
+- to be filled in before calling capi_ctr_ready():
+
+u8 manu[CAPI_MANUFACTURER_LEN]
+	value to return for CAPI_GET_MANUFACTURER
+
+capi_version version
+	value to return for CAPI_GET_VERSION
+
+capi_profile profile
+	value to return for CAPI_GET_PROFILE
+
+u8 serial[CAPI_SERIAL_LEN]
+	value to return for CAPI_GET_SERIAL
+
+
+5. Lower Layer Interface Functions
+
+(declared in <linux/isdn/capilli.h>)
+
+void register_capi_driver(struct capi_driver *drvr)
+void unregister_capi_driver(struct capi_driver *drvr)
+	register/unregister a driver with Kernel CAPI
+
+int attach_capi_ctr(struct capi_ctr *ctrlr)
+int detach_capi_ctr(struct capi_ctr *ctrlr)
+	register/unregister a device (controller) with Kernel CAPI
+
+void capi_ctr_ready(struct capi_ctr *ctrlr)
+void capi_ctr_reseted(struct capi_ctr *ctrlr)
+	signal controller ready/not ready
+
+void capi_ctr_suspend_output(struct capi_ctr *ctrlr)
+void capi_ctr_resume_output(struct capi_ctr *ctrlr)
+	signal suspend/resume
+
+void capi_ctr_handle_message(struct capi_ctr * ctrlr, u16 applid,
+				struct sk_buff *skb)
+	pass a received CAPI message to Kernel CAPI
+	for forwarding to the specified application
+
+
+6. Helper Functions and Macros
+
+Library functions (from <linux/isdn/capilli.h>):
+
+void capilib_new_ncci(struct list_head *head, u16 applid,
+			u32 ncci, u32 winsize)
+void capilib_free_ncci(struct list_head *head, u16 applid, u32 ncci)
+void capilib_release_appl(struct list_head *head, u16 applid)
+void capilib_release(struct list_head *head)
+void capilib_data_b3_conf(struct list_head *head, u16 applid,
+			u32 ncci, u16 msgid)
+u16  capilib_data_b3_req(struct list_head *head, u16 applid,
+			u32 ncci, u16 msgid)
+
+
+Macros to extract/set element values from/in a CAPI message header
+(from <linux/isdn/capiutil.h>):
+
+Get Macro		Set Macro			Element (Type)
+
+CAPIMSG_LEN(m)		CAPIMSG_SETLEN(m, len)		Total Length (u16)
+CAPIMSG_APPID(m)	CAPIMSG_SETAPPID(m, applid)	ApplID (u16)
+CAPIMSG_COMMAND(m)	CAPIMSG_SETCOMMAND(m,cmd)	Command (u8)
+CAPIMSG_SUBCOMMAND(m)	CAPIMSG_SETSUBCOMMAND(m, cmd)	Subcommand (u8)
+CAPIMSG_CMD(m)		-				Command*256
+							+ Subcommand (u16)
+CAPIMSG_MSGID(m)	CAPIMSG_SETMSGID(m, msgid)	Message Number (u16)
+
+CAPIMSG_CONTROL(m)	CAPIMSG_SETCONTROL(m, contr)	Controller/PLCI/NCCI
+							(u32)
+CAPIMSG_DATALEN(m)	CAPIMSG_SETDATALEN(m, len)	Data Length (u16)
+

Documentation/kernel-doc-nano-HOWTO.txt

@@ -269,7 +269,10 @@ Use the argument mechanism to document members or constants.
 
 Inside a struct description, you can use the "private:" and "public:"
 comment tags.  Structure fields that are inside a "private:" area
-are not listed in the generated output documentation.
+are not listed in the generated output documentation.  The "private:"
+and "public:" tags must begin immediately following a "/*" comment
+marker.  They may optionally include comments between the ":" and the
+ending "*/" marker.
 
 Example:
 
@@ -283,7 +286,7 @@ Example:
 struct my_struct {
     int a;
     int b;
-/* private: */
+/* private: internal use only */
     int c;
 };
 

Documentation/kernel-parameters.txt

@@ -17,6 +17,12 @@ are specified on the kernel command line with the module name plus
 
 	usbcore.blinkenlights=1
 
+Hyphens (dashes) and underscores are equivalent in parameter names, so
+	log_buf_len=1M print-fatal-signals=1
+can also be entered as
+	log-buf-len=1M print_fatal_signals=1
+
+
 This document may not be entirely up to date and comprehensive. The command
 "modinfo -p ${modulename}" shows a current list of all parameters of a loadable
 module. Loadable modules, after being loaded into the running kernel, also
@@ -345,7 +351,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			not play well with APC CPU idle - disable it if you have
 			APC and your system crashes randomly.
 
-	apic=		[APIC,i386] Advanced Programmable Interrupt Controller
+	apic=		[APIC,X86-32] Advanced Programmable Interrupt Controller
 			Change the output verbosity whilst booting
 			Format: { quiet (default) | verbose | debug }
 			Change the amount of debugging information output
@@ -702,7 +708,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			to discrete, to make X server driver able to add WB
 			entry later. This parameter enables that.
 
-	enable_timer_pin_1 [i386,x86-64]
+	enable_timer_pin_1 [X86]
 			Enable PIN 1 of APIC timer
 			Can be useful to work around chipset bugs
 			(in particular on some ATI chipsets).
@@ -775,7 +781,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	hashdist=	[KNL,NUMA] Large hashes allocated during boot
 			are distributed across NUMA nodes.  Defaults on
-			for IA-64, off otherwise.
+			for 64bit NUMA, off otherwise.
 			Format: 0 | 1 (for off | on)
 
 	hcl=		[IA-64] SGI's Hardware Graph compatibility layer

Documentation/lockdep-design.txt

@@ -54,9 +54,9 @@ locking error messages, inside curlies. A contrived example:
 The bit position indicates STATE, STATE-read, for each of the states listed
 above, and the character displayed in each indicates:
 
-   '.'  acquired while irqs disabled
-   '+'  acquired in irq context
-   '-'  acquired with irqs enabled
+   '.'  acquired while irqs disabled and not in irq context
+   '-'  acquired in irq context
+   '+'  acquired with irqs enabled
    '?'  acquired in irq context with irqs enabled.
 
 Unused mutexes cannot be part of the cause of an error.

Documentation/logo.txt

-Tux is taking a three month sabbatical to work as a barber, so Tuz is
-standing in.  He's taken pains to ensure you'll hardly notice.
+This is the full-colour version of the currently unofficial Linux logo
+("currently unofficial" just means that there has been no paperwork and
+that I have not really announced it yet).  It was created by Larry Ewing,
+and is freely usable as long as you acknowledge Larry as the original
+artist. 
+
+Note that there are black-and-white versions of this available that
+scale down to smaller sizes and are better for letterheads or whatever
+you want to use it for: for the full range of logos take a look at
+Larry's web-page:
+
+	http://www.isc.tamu.edu/~lewing/linux/
 
-Image by Andrew McGown and Josh Bush.  Image is licensed CC BY-SA.

Documentation/sysctl/vm.txt

@@ -90,6 +90,10 @@ will itself start writeback.
 If dirty_bytes is written, dirty_ratio becomes a function of its value
 (dirty_bytes / the amount of dirtyable system memory).
 
+Note: the minimum value allowed for dirty_bytes is two pages (in bytes); any
+value lower than this limit will be ignored and the old configuration will be
+retained.
+
 ==============================================================
 
 dirty_expire_centisecs

MAINTAINERS

@@ -3434,11 +3434,10 @@ L:	linuxppc-dev@ozlabs.org
 S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED MPC5XXX
-P:	Sylvain Munaut
-M:	tnt@246tNt.com
 P:	Grant Likely
 M:	grant.likely@secretlab.ca
 L:	linuxppc-dev@ozlabs.org
+T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED PPC4XX
@@ -3448,7 +3447,7 @@ P:	Matt Porter
 M:	mporter@kernel.crashing.org
 W:	http://www.penguinppc.org/
 L:	linuxppc-dev@ozlabs.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git
 S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED XILINX VIRTEX
@@ -3456,6 +3455,7 @@ P:	Grant Likely
 M:	grant.likely@secretlab.ca
 W:	http://wiki.secretlab.ca/index.php/Linux_on_Xilinx_Virtex
 L:	linuxppc-dev@ozlabs.org
+T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED PPC8XX
@@ -4189,7 +4189,7 @@ P:	Joel Becker
 M:	joel.becker@oracle.com
 L:	ocfs2-devel@oss.oracle.com (moderated for non-subscribers)
 W:	http://oss.oracle.com/projects/ocfs2/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2.git
 S:	Supported
 F:	Documentation/filesystems/ocfs2.txt
 F:	Documentation/filesystems/dlmfs.txt
@@ -4521,6 +4521,19 @@ M:	jim@jtan.com
 L:	cbe-oss-dev@ozlabs.org
 S:	Maintained
 
+PTRACE SUPPORT
+P:	Roland McGrath
+M:	roland@redhat.com
+P:	Oleg Nesterov
+M:	oleg@redhat.com
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+F:	include/asm-generic/syscall.h
+F:	include/linux/ptrace.h
+F:	include/linux/regset.h
+F:	include/linux/tracehook.h
+F:	kernel/ptrace.c
+
 PVRUSB2 VIDEO4LINUX DRIVER
 P:	Mike Isely
 M:	isely@pobox.com
@@ -4666,13 +4679,13 @@ F:	kernel/rcutorture.c
 
 RDC R-321X SoC
 P:	Florian Fainelli
-M:	florian.fainelli@telecomint.eu
+M:	florian@openwrt.org
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
 RDC R6040 FAST ETHERNET DRIVER
 P:	Florian Fainelli
-M:	florian.fainelli@telecomint.eu
+M:	florian@openwrt.org
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/r6040.c

Makefile

 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 30
-EXTRAVERSION = -rc3
-NAME = Temporary Tasmanian Devil
+EXTRAVERSION = -rc5
+NAME = Vindictive Armadillo
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@@ -1293,7 +1293,7 @@ help:
 	@echo  '  dir/            - Build all files in dir and below'
 	@echo  '  dir/file.[ois]  - Build specified target only'
 	@echo  '  dir/file.ko     - Build module including final link'
-	@echo  '  prepare         - Set up for building external modules'
+	@echo  '  modules_prepare - Set up for building external modules'
 	@echo  '  tags/TAGS	  - Generate tags file for editors'
 	@echo  '  cscope	  - Generate cscope index'
 	@echo  '  kernelrelease	  - Output the release version string'
@@ -1421,7 +1421,9 @@ $(clean-dirs):
 	$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
 
 clean:	rm-dirs := $(MODVERDIR)
-clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
+clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers \
+                   $(KBUILD_EXTMOD)/Module.markers \
+                   $(KBUILD_EXTMOD)/modules.order
 clean: $(clean-dirs)
 	$(call cmd,rmdirs)
 	$(call cmd,rmfiles)

arch/alpha/include/asm/barrier.h

@@ -16,11 +16,13 @@ __asm__ __volatile__("wmb": : :"memory")
 __asm__ __volatile__("mb": : :"memory")
 
 #ifdef CONFIG_SMP
+#define __ASM_SMP_MB	"\tmb\n"
 #define smp_mb()	mb()
 #define smp_rmb()	rmb()
 #define smp_wmb()	wmb()
 #define smp_read_barrier_depends()	read_barrier_depends()
 #else
+#define __ASM_SMP_MB
 #define smp_mb()	barrier()
 #define smp_rmb()	barrier()
 #define smp_wmb()	barrier()

arch/alpha/include/asm/futex.h

-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
+#ifndef _ASM_ALPHA_FUTEX_H
+#define _ASM_ALPHA_FUTEX_H
 
-#include <asm-generic/futex.h>
+#ifdef __KERNEL__
 
-#endif
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+#include <asm/barrier.h>
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)	\
+	__asm__ __volatile__(					\
+		__ASM_SMP_MB					\
+	"1:	ldl_l	%0,0(%2)\n"				\
+		insn						\
+	"2:	stl_c	%1,0(%2)\n"				\
+	"	beq	%1,4f\n"				\
+	"	mov	$31,%1\n"				\
+	"3:	.subsection 2\n"				\
+	"4:	br	1b\n"					\
+	"	.previous\n"					\
+	"	.section __ex_table,\"a\"\n"			\
+	"	.long	1b-.\n"					\
+	"	lda	$31,3b-1b(%1)\n"			\
+	"	.long	2b-.\n"					\
+	"	lda	$31,3b-2b(%1)\n"			\
+	"	.previous\n"					\
+	:	"=&r" (oldval), "=&r"(ret)			\
+	:	"r" (uaddr), "r"(oparg)				\
+	:	"memory")
+
+static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int oldval = 0, ret;
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	pagefault_disable();
+
+	switch (op) {
+	case FUTEX_OP_SET:
+		__futex_atomic_op("mov %3,%1\n", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ADD:
+		__futex_atomic_op("addl %0,%3,%1\n", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_OR:
+		__futex_atomic_op("or %0,%3,%1\n", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ANDN:
+		__futex_atomic_op("andnot %0,%3,%1\n", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_XOR:
+		__futex_atomic_op("xor %0,%3,%1\n", ret, oldval, uaddr, oparg);
+		break;
+	default:
+		ret = -ENOSYS;
+	}
+
+	pagefault_enable();
+
+	if (!ret) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+		default: ret = -ENOSYS;
+		}
+	}
+	return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+	int prev, cmp;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	__asm__ __volatile__ (
+		__ASM_SMP_MB
+	"1:	ldl_l	%0,0(%2)\n"
+	"	cmpeq	%0,%3,%1\n"
+	"	beq	%1,3f\n"
+	"	mov	%4,%1\n"
+	"2:	stl_c	%1,0(%2)\n"
+	"	beq	%1,4f\n"
+	"3:	.subsection 2\n"
+	"4:	br	1b\n"
+	"	.previous\n"
+	"	.section __ex_table,\"a\"\n"
+	"	.long	1b-.\n"
+	"	lda	$31,3b-1b(%0)\n"
+	"	.long	2b-.\n"
+	"	lda	$31,3b-2b(%0)\n"
+	"	.previous\n"
+	:	"=&r"(prev), "=&r"(cmp)
+	:	"r"(uaddr), "r"((long)oldval), "r"(newval)
+	:	"memory");
+
+	return prev;
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_ALPHA_FUTEX_H */

arch/alpha/include/asm/uaccess.h

@@ -507,5 +507,7 @@ struct exception_table_entry
 	(pc) + (_fixup)->fixup.bits.nextinsn;			\
 })
 
+#define ARCH_HAS_SORT_EXTABLE
+#define ARCH_HAS_SEARCH_EXTABLE
 
 #endif /* __ALPHA_UACCESS_H */

arch/alpha/kernel/Makefile

@@ -8,7 +8,7 @@ EXTRA_CFLAGS	:= -Werror -Wno-sign-compare
 
 obj-y    := entry.o traps.o process.o init_task.o osf_sys.o irq.o \
 	    irq_alpha.o signal.o setup.o ptrace.o time.o \
-	    alpha_ksyms.o systbls.o err_common.o io.o binfmt_loader.o
+	    alpha_ksyms.o systbls.o err_common.o io.o
 
 obj-$(CONFIG_VGA_HOSE)	+= console.o
 obj-$(CONFIG_SMP)	+= smp.o
@@ -43,6 +43,10 @@ else
 # Misc support
 obj-$(CONFIG_ALPHA_SRM)		+= srmcons.o
 
+ifdef CONFIG_BINFMT_AOUT
+obj-y	+= binfmt_loader.o
+endif
+
 # Core logic support
 obj-$(CONFIG_ALPHA_APECS)	+= core_apecs.o
 obj-$(CONFIG_ALPHA_CIA)		+= core_cia.o

arch/alpha/kernel/binfmt_loader.c

@@ -46,6 +46,6 @@ static struct linux_binfmt loader_format = {
 
 static int __init init_loader_binfmt(void)
 {
-	return register_binfmt(&loader_format);
+	return insert_binfmt(&loader_format);
 }
 arch_initcall(init_loader_binfmt);

arch/alpha/kernel/err_ev6.c

@@ -229,7 +229,7 @@ ev6_process_logout_frame(struct el_common *mchk_header, int print)
 }
 
 void
-ev6_machine_check(u64 vector, u64 la_ptr)
+ev6_machine_check(unsigned long vector, unsigned long la_ptr)
 {
 	struct el_common *mchk_header = (struct el_common *)la_ptr;
 

arch/alpha/kernel/err_ev7.c

@@ -117,7 +117,7 @@ ev7_collect_logout_frame_subpackets(struct el_subpacket *el_ptr,
 }
 
 void
-ev7_machine_check(u64 vector, u64 la_ptr)
+ev7_machine_check(unsigned long vector, unsigned long la_ptr)
 {
 	struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr;
 	char *saved_err_prefix = err_print_prefix;
@@ -246,7 +246,7 @@ ev7_process_pal_subpacket(struct el_subpacket *header)
 
 	switch(header->type) {
 	case EL_TYPE__PAL__LOGOUT_FRAME:
-		printk("%s*** MCHK occurred on LPID %ld (RBOX %llx)\n",
+		printk("%s*** MCHK occurred on LPID %lld (RBOX %llx)\n",
 		       err_print_prefix,
 		       packet->by_type.logout.whami, 
 		       packet->by_type.logout.rbox_whami);

arch/alpha/kernel/err_impl.h

@@ -60,26 +60,26 @@ extern struct ev7_lf_subpackets *
 ev7_collect_logout_frame_subpackets(struct el_subpacket *,
 				    struct ev7_lf_subpackets *);
 extern void ev7_register_error_handlers(void);
-extern void ev7_machine_check(u64, u64);
+extern void ev7_machine_check(unsigned long, unsigned long);
 
 /*
  * err_ev6.c
  */
 extern void ev6_register_error_handlers(void);
 extern int ev6_process_logout_frame(struct el_common *, int);
-extern void ev6_machine_check(u64, u64);
+extern void ev6_machine_check(unsigned long, unsigned long);
 
 /*
  * err_marvel.c
  */
-extern void marvel_machine_check(u64, u64);
+extern void marvel_machine_check(unsigned long, unsigned long);
 extern void marvel_register_error_handlers(void);
 
 /*
  * err_titan.c
  */
 extern int titan_process_logout_frame(struct el_common *, int);
-extern void titan_machine_check(u64, u64);
+extern void titan_machine_check(unsigned long, unsigned long);
 extern void titan_register_error_handlers(void);
 extern int privateer_process_logout_frame(struct el_common *, int);
-extern void privateer_machine_check(u64, u64);
+extern void privateer_machine_check(unsigned long, unsigned long);

arch/alpha/kernel/err_marvel.c

@@ -1042,7 +1042,7 @@ marvel_process_logout_frame(struct ev7_lf_subpackets *lf_subpackets, int print)
 }
 
 void
-marvel_machine_check(u64 vector, u64 la_ptr)
+marvel_machine_check(unsigned long vector, unsigned long la_ptr)
 {
 	struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr;
 	int (*process_frame)(struct ev7_lf_subpackets *, int) = NULL;

arch/alpha/kernel/err_titan.c

@@ -380,7 +380,7 @@ titan_process_logout_frame(struct el_common *mchk_header, int print)
 }
 
 void
-titan_machine_check(u64 vector, u64 la_ptr)
+titan_machine_check(unsigned long vector, unsigned long la_ptr)
 {
 	struct el_common *mchk_header = (struct el_common *)la_ptr;
 	struct el_TITAN_sysdata_mcheck *tmchk =
@@ -702,7 +702,7 @@ privateer_process_logout_frame(struct el_common *mchk_header, int print)
 }
 
 void
-privateer_machine_check(u64 vector, u64 la_ptr)
+privateer_machine_check(unsigned long vector, unsigned long la_ptr)
 {
 	struct el_common *mchk_header = (struct el_common *)la_ptr;
 	struct el_TITAN_sysdata_mcheck *tmchk =

arch/alpha/kernel/proto.h

@@ -36,7 +36,6 @@ extern void cia_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
 extern struct pci_ops irongate_pci_ops;
 extern int irongate_pci_clr_err(void);
 extern void irongate_init_arch(void);
-extern void irongate_machine_check(u64, u64);
 #define irongate_pci_tbi ((void *)0)
 
 /* core_lca.c */
@@ -49,7 +48,7 @@ extern void lca_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
 extern struct pci_ops marvel_pci_ops;
 extern void marvel_init_arch(void);
 extern void marvel_kill_arch(int);
-extern void marvel_machine_check(u64, u64);
+extern void marvel_machine_check(unsigned long, unsigned long);
 extern void marvel_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
 extern int marvel_pa_to_nid(unsigned long);
 extern int marvel_cpuid_to_nid(int);
@@ -86,7 +85,7 @@ extern void t2_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
 extern struct pci_ops titan_pci_ops;
 extern void titan_init_arch(void);
 extern void titan_kill_arch(int);
-extern void titan_machine_check(u64, u64);
+extern void titan_machine_check(unsigned long, unsigned long);
 extern void titan_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
 extern struct _alpha_agp_info *titan_agp_info(void);
 

arch/alpha/mm/extable.c

@@ -3,11 +3,49 @@
  */
 
 #include <linux/module.h>
+#include <linux/sort.h>
 #include <asm/uaccess.h>
 
+static inline unsigned long ex_to_addr(const struct exception_table_entry *x)
+{
+	return (unsigned long)&x->insn + x->insn;
+}
+
+static void swap_ex(void *a, void *b, int size)
+{
+	struct exception_table_entry *ex_a = a, *ex_b = b;
+	unsigned long addr_a = ex_to_addr(ex_a), addr_b = ex_to_addr(ex_b);
+	unsigned int t = ex_a->fixup.unit;
+
+	ex_a->fixup.unit = ex_b->fixup.unit;
+	ex_b->fixup.unit = t;
+	ex_a->insn = (int)(addr_b - (unsigned long)&ex_a->insn);
+	ex_b->insn = (int)(addr_a - (unsigned long)&ex_b->insn);
+}
+
+/*
+ * The exception table needs to be sorted so that the binary
+ * search that we use to find entries in it works properly.
+ * This is used both for the kernel exception table and for
+ * the exception tables of modules that get loaded.
+ */
+static int cmp_ex(const void *a, const void *b)
+{
+	const struct exception_table_entry *x = a, *y = b;
+
+	/* avoid overflow */
+	if (ex_to_addr(x) > ex_to_addr(y))
+		return 1;
+	if (ex_to_addr(x) < ex_to_addr(y))
+		return -1;
+	return 0;
+}
+
 void sort_extable(struct exception_table_entry *start,
 		  struct exception_table_entry *finish)
 {
+	sort(start, finish - start, sizeof(struct exception_table_entry),
+	     cmp_ex, swap_ex);
 }
 
 const struct exception_table_entry *
@@ -20,7 +58,7 @@ search_extable(const struct exception_table_entry *first,
 		unsigned long mid_value;
 
 		mid = (last - first) / 2 + first;
-		mid_value = (unsigned long)&mid->insn + mid->insn;
+		mid_value = ex_to_addr(mid);
                 if (mid_value == value)
                         return mid;
                 else if (mid_value < value)

arch/arm/Kconfig

@@ -454,6 +454,7 @@ config ARCH_MXC
 	select ARCH_MTD_XIP
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
+	select HAVE_CLK
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 
@@ -486,8 +487,6 @@ config ARCH_PXA
 	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_CLK
-	select COMMON_CLKDEV
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select TICK_ONESHOT
@@ -585,6 +584,8 @@ config ARCH_DAVINCI
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
 	select ZONE_DMA
+	select HAVE_IDE
+	select COMMON_CLKDEV
 	help
 	  Support for TI's DaVinci platform.
 
@@ -740,6 +741,56 @@ if !MMU
 source "arch/arm/Kconfig-nommu"
 endif
 
+config ARM_ERRATA_411920
+	bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
+	depends on CPU_V6 && !SMP
+	help
+	  Invalidation of the Instruction Cache operation can
+	  fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
+	  It does not affect the MPCore. This option enables the ARM Ltd.
+	  recommended workaround.
+
+config ARM_ERRATA_430973
+	bool "ARM errata: Stale prediction on replaced interworking branch"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 430973 Cortex-A8
+	  (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb
+	  interworking branch is replaced with another code sequence at the
+	  same virtual address, whether due to self-modifying code or virtual
+	  to physical address re-mapping, Cortex-A8 does not recover from the
+	  stale interworking branch prediction. This results in Cortex-A8
+	  executing the new code sequence in the incorrect ARM or Thumb state.
+	  The workaround enables the BTB/BTAC operations by setting ACTLR.IBE
+	  and also flushes the branch target cache at every context switch.
+	  Note that setting specific bits in the ACTLR register may not be
+	  available in non-secure mode.
+
+config ARM_ERRATA_458693
+	bool "ARM errata: Processor deadlock when a false hazard is created"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 458693 Cortex-A8 (r2p0)
+	  erratum. For very specific sequences of memory operations, it is
+	  possible for a hazard condition intended for a cache line to instead
+	  be incorrectly associated with a different cache line. This false
+	  hazard might then cause a processor deadlock. The workaround enables
+	  the L1 caching of the NEON accesses and disables the PLD instruction
+	  in the ACTLR register. Note that setting specific bits in the ACTLR
+	  register may not be available in non-secure mode.
+
+config ARM_ERRATA_460075
+	bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 460075 Cortex-A8 (r2p0)
+	  erratum. Any asynchronous access to the L2 cache may encounter a
+	  situation in which recent store transactions to the L2 cache are lost
+	  and overwritten with stale memory contents from external memory. The
+	  workaround disables the write-allocate mode for the L2 cache via the
+	  ACTLR register. Note that setting specific bits in the ACTLR register
+	  may not be available in non-secure mode.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
@@ -1171,12 +1222,6 @@ config CPU_FREQ_IMX
 
 	  If in doubt, say N.
 
-config CPU_FREQ_PXA
-	bool
-	depends on CPU_FREQ && ARCH_PXA && PXA25x
-	default y
-	select CPU_FREQ_DEFAULT_GOV_USERSPACE
-
 endif
 
 source "drivers/cpuidle/Kconfig"

arch/arm/configs/mx3_defconfig

@@ -197,7 +197,7 @@ CONFIG_MXC_PWM=y
 #
 CONFIG_CPU_32=y
 CONFIG_CPU_V6=y
-CONFIG_CPU_32v6K=y
+# CONFIG_CPU_32v6K is not set
 CONFIG_CPU_32v6=y
 CONFIG_CPU_ABRT_EV6=y
 CONFIG_CPU_PABRT_NOIFAR=y

arch/arm/configs/viper_defconfig

@@ -298,7 +298,6 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=m
 CONFIG_CPU_FREQ_GOV_ONDEMAND=m
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PXA=y
 
 #
 # Floating point emulation

arch/arm/include/asm/elf.h

@@ -45,13 +45,15 @@ typedef struct user_fp elf_fpregset_t;
 #define EF_ARM_HASENTRY		0x00000002	/* All */
 #define EF_ARM_RELEXEC		0x00000001	/* All */
 
-#define R_ARM_NONE	0
-#define R_ARM_PC24	1
-#define R_ARM_ABS32	2
-#define R_ARM_CALL	28
-#define R_ARM_JUMP24	29
-#define R_ARM_V4BX	40
-#define R_ARM_PREL31	42
+#define R_ARM_NONE		0
+#define R_ARM_PC24		1
+#define R_ARM_ABS32		2
+#define R_ARM_CALL		28
+#define R_ARM_JUMP24		29
+#define R_ARM_V4BX		40
+#define R_ARM_PREL31		42
+#define R_ARM_MOVW_ABS_NC	43
+#define R_ARM_MOVT_ABS		44
 
 /*
  * These are used to set parameters in the core dumps.

arch/arm/kernel/module.c

@@ -169,6 +169,21 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			*(u32 *)loc = offset & 0x7fffffff;
 			break;
 
+		case R_ARM_MOVW_ABS_NC:
+		case R_ARM_MOVT_ABS:
+			offset = *(u32 *)loc;
+			offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff);
+			offset = (offset ^ 0x8000) - 0x8000;
+
+			offset += sym->st_value;
+			if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS)
+				offset >>= 16;
+
+			*(u32 *)loc &= 0xfff0f000;
+			*(u32 *)loc |= ((offset & 0xf000) << 4) |
+					(offset & 0x0fff);
+			break;
+
 		default:
 			printk(KERN_ERR "%s: unknown relocation: %u\n",
 			       module->name, ELF32_R_TYPE(rel->r_info));

arch/arm/mach-davinci/Kconfig

@@ -4,19 +4,56 @@ menu "TI DaVinci Implementations"
 
 comment "DaVinci Core Type"
 
-config ARCH_DAVINCI644x
-	default y
+config ARCH_DAVINCI_DM644x
 	bool "DaVinci 644x based system"
 
 comment "DaVinci Board Type"
 
 config MACH_DAVINCI_EVM
-	bool "TI DaVinci EVM"
+	bool "TI DM644x EVM"
 	default y
-	depends on ARCH_DAVINCI644x
+	depends on ARCH_DAVINCI_DM644x
 	help
 	  Configure this option to specify the whether the board used
-	  for development is a DaVinci EVM
+	  for development is a DM644x EVM
+
+
+config DAVINCI_MUX
+	bool "DAVINCI multiplexing support"
+	depends on ARCH_DAVINCI
+	default y
+	help
+	  Pin multiplexing support for DAVINCI boards. If your bootloader
+	  sets the multiplexing correctly, say N. Otherwise, or if unsure,
+	  say Y.
+
+config DAVINCI_MUX_DEBUG
+        bool "Multiplexing debug output"
+        depends on DAVINCI_MUX
+        help
+          Makes the multiplexing functions print out a lot of debug info.
+          This is useful if you want to find out the correct values of the
+          multiplexing registers.
+
+config DAVINCI_MUX_WARNINGS
+        bool "Warn about pins the bootloader didn't set up"
+        depends on DAVINCI_MUX
+        help
+          Choose Y here to warn whenever driver initialization logic needs
+          to change the pin multiplexing setup.  When there are no warnings
+          printed, it's safe to deselect DAVINCI_MUX for your product.
+
+config DAVINCI_RESET_CLOCKS
+	bool "Reset unused clocks during boot"
+	depends on ARCH_DAVINCI
+	help
+	  Say Y if you want to reset unused clocks during boot.
+	  This option saves power, but assumes all drivers are
+	  using the clock framework. Broken drivers that do not
+	  yet use clock framework may not work with this option.
+	  If you are booting from another operating system, you
+	  probably do not want this option enabled until your
+	  device drivers work properly.
 
 endmenu
 

arch/arm/mach-davinci/Makefile

@@ -5,7 +5,12 @@
 
 # Common objects
 obj-y 			:= time.o irq.o clock.o serial.o io.o id.o psc.o \
-			   gpio.o mux.o devices.o usb.o
+			   gpio.o devices.o dma.o usb.o
+
+obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
+
+# Chip specific
+obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o
 
 # Board specific
-obj-$(CONFIG_MACH_DAVINCI_EVM)  += board-evm.o
+obj-$(CONFIG_MACH_DAVINCI_EVM)  	+= board-dm644x-evm.o

arch/arm/mach-davinci/devices.c

@@ -21,6 +21,10 @@
 #include <mach/hardware.h>
 #include <mach/i2c.h>
 #include <mach/irqs.h>
+#include <mach/cputype.h>
+#include <mach/mux.h>
+
+#define DAVINCI_I2C_BASE	     0x01C21000
 
 static struct resource i2c_resources[] = {
 	{
@@ -43,6 +47,9 @@ static struct platform_device davinci_i2c_device = {
 
 void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata)
 {
+	if (cpu_is_davinci_dm644x())
+		davinci_cfg_reg(DM644X_I2C);
+
 	davinci_i2c_device.dev.platform_data = pdata;
 	(void) platform_device_register(&davinci_i2c_device);
 }

arch/arm/mach-davinci/include/mach/board-dm6446evm.h

+/*
+ * DaVinci DM6446 EVM board specific headers
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or ifndef.
+ */
+
+#ifndef _MACH_DAVINCI_DM6446EVM_H
+#define _MACH_DAVINCI_DM6446EVM_H
+
+#include <linux/types.h>
+
+int dm6446evm_eeprom_read(char *buf, off_t off, size_t count);
+int dm6446evm_eeprom_write(char *buf, off_t off, size_t count);
+
+#endif

arch/arm/mach-davinci/include/mach/clkdev.h

+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+
+static inline int __clk_get(struct clk *clk)
+{
+	return 1;
+}
+
+static inline void __clk_put(struct clk *clk)
+{
+}
+
+#endif

arch/arm/mach-davinci/include/mach/clock.h

@@ -17,6 +17,5 @@ struct clk;
 
 extern int clk_register(struct clk *clk);
 extern void clk_unregister(struct clk *clk);
-extern int davinci_clk_init(void);
 
 #endif