Commit 6cdef273 authored by Govind Singh's avatar Govind Singh Committed by Stephen Boyd

clk: qcom: Add Q6SSTOP clock controller for QCS404

Add support for the Q6SSTOP clock control used on qcs404
based devices. This would allow wcss remoteproc driver to
control the required WCSS Q6SSTOP clock/reset controls to
bring the subsystem out of reset and shutdown the WCSS Q6DSP.
Signed-off-by: default avatarGovind Singh <govinds@codeaurora.org>
Link: https://lkml.kernel.org/r/20191011132928.9388-3-govinds@codeaurora.org
[sboyd@kernel.org: Sort makefile]
Signed-off-by: default avatarStephen Boyd <sboyd@kernel.org>
parent 8e7b71f8
...@@ -248,6 +248,14 @@ config QCS_TURING_404 ...@@ -248,6 +248,14 @@ config QCS_TURING_404
Support for the Turing Clock Controller on QCS404, provides clocks Support for the Turing Clock Controller on QCS404, provides clocks
and resets for the Turing subsystem. and resets for the Turing subsystem.
config QCS_Q6SSTOP_404
tristate "QCS404 Q6SSTOP Clock Controller"
select QCS_GCC_404
help
Support for the Q6SSTOP clock controller on QCS404 devices.
Say Y if you want to use the Q6SSTOP branch clocks of the WCSS clock
controller to reset the Q6SSTOP subsystem.
config SDM_GCC_845 config SDM_GCC_845
tristate "SDM845 Global Clock Controller" tristate "SDM845 Global Clock Controller"
select QCOM_GDSC select QCOM_GDSC
......
...@@ -42,6 +42,7 @@ obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o ...@@ -42,6 +42,7 @@ obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
obj-$(CONFIG_QCOM_CLK_RPMH) += clk-rpmh.o obj-$(CONFIG_QCOM_CLK_RPMH) += clk-rpmh.o
obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
obj-$(CONFIG_QCS_GCC_404) += gcc-qcs404.o obj-$(CONFIG_QCS_GCC_404) += gcc-qcs404.o
obj-$(CONFIG_QCS_Q6SSTOP_404) += q6sstop-qcs404.o
obj-$(CONFIG_QCS_TURING_404) += turingcc-qcs404.o obj-$(CONFIG_QCS_TURING_404) += turingcc-qcs404.o
obj-$(CONFIG_SDM_CAMCC_845) += camcc-sdm845.o obj-$(CONFIG_SDM_CAMCC_845) += camcc-sdm845.o
obj-$(CONFIG_SDM_DISPCC_845) += dispcc-sdm845.o obj-$(CONFIG_SDM_DISPCC_845) += dispcc-sdm845.o
......
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2018, The Linux Foundation. All rights reserved.
*/
#include <linux/bitops.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pm_clock.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <dt-bindings/clock/qcom,q6sstopcc-qcs404.h>
#include "clk-regmap.h"
#include "clk-branch.h"
#include "common.h"
#include "reset.h"
static struct clk_branch lcc_ahbfabric_cbc_clk = {
.halt_reg = 0x1b004,
.halt_check = BRANCH_HALT,
.clkr = {
.enable_reg = 0x1b004,
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "lcc_ahbfabric_cbc_clk",
.ops = &clk_branch2_ops,
},
},
};
static struct clk_branch lcc_q6ss_ahbs_cbc_clk = {
.halt_reg = 0x22000,
.halt_check = BRANCH_VOTED,
.clkr = {
.enable_reg = 0x22000,
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "lcc_q6ss_ahbs_cbc_clk",
.ops = &clk_branch2_ops,
},
},
};
static struct clk_branch lcc_q6ss_tcm_slave_cbc_clk = {
.halt_reg = 0x1c000,
.halt_check = BRANCH_VOTED,
.clkr = {
.enable_reg = 0x1c000,
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "lcc_q6ss_tcm_slave_cbc_clk",
.ops = &clk_branch2_ops,
},
},
};
static struct clk_branch lcc_q6ss_ahbm_cbc_clk = {
.halt_reg = 0x22004,
.halt_check = BRANCH_VOTED,
.clkr = {
.enable_reg = 0x22004,
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "lcc_q6ss_ahbm_cbc_clk",
.ops = &clk_branch2_ops,
},
},
};
static struct clk_branch lcc_q6ss_axim_cbc_clk = {
.halt_reg = 0x1c004,
.halt_check = BRANCH_VOTED,
.clkr = {
.enable_reg = 0x1c004,
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "lcc_q6ss_axim_cbc_clk",
.ops = &clk_branch2_ops,
},
},
};
static struct clk_branch lcc_q6ss_bcr_sleep_clk = {
.halt_reg = 0x6004,
.halt_check = BRANCH_VOTED,
.clkr = {
.enable_reg = 0x6004,
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "lcc_q6ss_bcr_sleep_clk",
.ops = &clk_branch2_ops,
},
},
};
/* TCSR clock */
static struct clk_branch tcsr_lcc_csr_cbcr_clk = {
.halt_reg = 0x8008,
.halt_check = BRANCH_VOTED,
.clkr = {
.enable_reg = 0x8008,
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "tcsr_lcc_csr_cbcr_clk",
.ops = &clk_branch2_ops,
},
},
};
static struct regmap_config q6sstop_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
.fast_io = true,
};
static struct clk_regmap *q6sstop_qcs404_clocks[] = {
[LCC_AHBFABRIC_CBC_CLK] = &lcc_ahbfabric_cbc_clk.clkr,
[LCC_Q6SS_AHBS_CBC_CLK] = &lcc_q6ss_ahbs_cbc_clk.clkr,
[LCC_Q6SS_TCM_SLAVE_CBC_CLK] = &lcc_q6ss_tcm_slave_cbc_clk.clkr,
[LCC_Q6SS_AHBM_CBC_CLK] = &lcc_q6ss_ahbm_cbc_clk.clkr,
[LCC_Q6SS_AXIM_CBC_CLK] = &lcc_q6ss_axim_cbc_clk.clkr,
[LCC_Q6SS_BCR_SLEEP_CLK] = &lcc_q6ss_bcr_sleep_clk.clkr,
};
static const struct qcom_reset_map q6sstop_qcs404_resets[] = {
[Q6SSTOP_BCR_RESET] = { 0x6000 },
};
static const struct qcom_cc_desc q6sstop_qcs404_desc = {
.config = &q6sstop_regmap_config,
.clks = q6sstop_qcs404_clocks,
.num_clks = ARRAY_SIZE(q6sstop_qcs404_clocks),
.resets = q6sstop_qcs404_resets,
.num_resets = ARRAY_SIZE(q6sstop_qcs404_resets),
};
static struct clk_regmap *tcsr_qcs404_clocks[] = {
[TCSR_Q6SS_LCC_CBCR_CLK] = &tcsr_lcc_csr_cbcr_clk.clkr,
};
static const struct qcom_cc_desc tcsr_qcs404_desc = {
.config = &q6sstop_regmap_config,
.clks = tcsr_qcs404_clocks,
.num_clks = ARRAY_SIZE(tcsr_qcs404_clocks),
};
static const struct of_device_id q6sstopcc_qcs404_match_table[] = {
{ .compatible = "qcom,qcs404-q6sstopcc" },
{ }
};
MODULE_DEVICE_TABLE(of, q6sstopcc_qcs404_match_table);
static int q6sstopcc_qcs404_probe(struct platform_device *pdev)
{
const struct qcom_cc_desc *desc;
int ret;
pm_runtime_enable(&pdev->dev);
ret = pm_clk_create(&pdev->dev);
if (ret)
goto disable_pm_runtime;
ret = pm_clk_add(&pdev->dev, NULL);
if (ret < 0) {
dev_err(&pdev->dev, "failed to acquire iface clock\n");
goto destroy_pm_clk;
}
q6sstop_regmap_config.name = "q6sstop_tcsr";
desc = &tcsr_qcs404_desc;
ret = qcom_cc_probe_by_index(pdev, 1, desc);
if (ret)
goto destroy_pm_clk;
q6sstop_regmap_config.name = "q6sstop_cc";
desc = &q6sstop_qcs404_desc;
ret = qcom_cc_probe_by_index(pdev, 0, desc);
if (ret)
goto destroy_pm_clk;
return 0;
destroy_pm_clk:
pm_clk_destroy(&pdev->dev);
disable_pm_runtime:
pm_runtime_disable(&pdev->dev);
return ret;
}
static int q6sstopcc_qcs404_remove(struct platform_device *pdev)
{
pm_clk_destroy(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return 0;
}
static const struct dev_pm_ops q6sstopcc_pm_ops = {
SET_RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL)
};
static struct platform_driver q6sstopcc_qcs404_driver = {
.probe = q6sstopcc_qcs404_probe,
.remove = q6sstopcc_qcs404_remove,
.driver = {
.name = "qcs404-q6sstopcc",
.of_match_table = q6sstopcc_qcs404_match_table,
.pm = &q6sstopcc_pm_ops,
},
};
module_platform_driver(q6sstopcc_qcs404_driver);
MODULE_DESCRIPTION("QTI QCS404 Q6SSTOP Clock Controller Driver");
MODULE_LICENSE("GPL v2");
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2018, The Linux Foundation. All rights reserved.
*/
#ifndef _DT_BINDINGS_CLK_Q6SSTOP_QCS404_H
#define _DT_BINDINGS_CLK_Q6SSTOP_QCS404_H
#define LCC_AHBFABRIC_CBC_CLK 0
#define LCC_Q6SS_AHBS_CBC_CLK 1
#define LCC_Q6SS_TCM_SLAVE_CBC_CLK 2
#define LCC_Q6SS_AHBM_CBC_CLK 3
#define LCC_Q6SS_AXIM_CBC_CLK 4
#define LCC_Q6SS_BCR_SLEEP_CLK 5
#define TCSR_Q6SS_LCC_CBCR_CLK 6
#define Q6SSTOP_BCR_RESET 1
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment