Commit 6d1cee44 authored by Anton Vorontsov's avatar Anton Vorontsov Committed by Bartlomiej Zolnierkiewicz

alim15x3: disable init_hwif_ali15x3 for PowerPC

We don't need init_hwif_ali15x3() on the PowerPC systems either.

Before:

ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc8) at  PCI slot 0001:03:1f.0
ALI15X3: 100% native mode on irq 19
    ide0: BM-DMA at 0x1120-0x1127
    ide1: BM-DMA at 0x1128-0x112f
hda: SONY DVD RW AW-Q170A, ATAPI CD/DVD-ROM drive
hda: UDMA/66 mode selected
ide0: Disabled unable to get IRQ 14.
ide0: failed to initialize IDE interface
ide1: Disabled unable to get IRQ 15.
ide1: failed to initialize IDE interface

After:

ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc8) at  PCI slot 0001:03:1f.0
ALI15X3: 100% native mode on irq 19
    ide0: BM-DMA at 0x1120-0x1127
    ide1: BM-DMA at 0x1128-0x112f
hda: SONY DVD RW AW-Q170A, ATAPI CD/DVD-ROM drive
hda: UDMA/66 mode selected
ide0 at 0x1100-0x1107,0x110a on irq 19
ide1 at 0x1110-0x1117,0x111a on irq 19
hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache

ide0 works well, though I can't test ide1, it isn't traced out on
the board.
Signed-off-by: default avatarAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent b26b0c59
...@@ -412,14 +412,14 @@ static u8 __devinit ali_cable_detect(ide_hwif_t *hwif) ...@@ -412,14 +412,14 @@ static u8 __devinit ali_cable_detect(ide_hwif_t *hwif)
return cbl; return cbl;
} }
#ifndef CONFIG_SPARC64 #if !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC)
/** /**
* init_hwif_ali15x3 - Initialize the ALI IDE x86 stuff * init_hwif_ali15x3 - Initialize the ALI IDE x86 stuff
* @hwif: interface to configure * @hwif: interface to configure
* *
* Obtain the IRQ tables for an ALi based IDE solution on the PC * Obtain the IRQ tables for an ALi based IDE solution on the PC
* class platforms. This part of the code isn't applicable to the * class platforms. This part of the code isn't applicable to the
* Sparc systems * Sparc and PowerPC systems.
*/ */
static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif) static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif)
...@@ -463,7 +463,9 @@ static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif) ...@@ -463,7 +463,9 @@ static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif)
hwif->irq = irq; hwif->irq = irq;
} }
} }
#endif #else
#define init_hwif_ali15x3 NULL
#endif /* !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC) */
/** /**
* init_dma_ali15x3 - set up DMA on ALi15x3 * init_dma_ali15x3 - set up DMA on ALi15x3
...@@ -517,9 +519,7 @@ static const struct ide_dma_ops ali_dma_ops = { ...@@ -517,9 +519,7 @@ static const struct ide_dma_ops ali_dma_ops = {
static const struct ide_port_info ali15x3_chipset __devinitdata = { static const struct ide_port_info ali15x3_chipset __devinitdata = {
.name = "ALI15X3", .name = "ALI15X3",
.init_chipset = init_chipset_ali15x3, .init_chipset = init_chipset_ali15x3,
#ifndef CONFIG_SPARC64
.init_hwif = init_hwif_ali15x3, .init_hwif = init_hwif_ali15x3,
#endif
.init_dma = init_dma_ali15x3, .init_dma = init_dma_ali15x3,
.port_ops = &ali_port_ops, .port_ops = &ali_port_ops,
.pio_mask = ATA_PIO5, .pio_mask = ATA_PIO5,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment