Commit 6d6acd14 authored by Sudeep Holla's avatar Sudeep Holla

arm64: dts: juno/vexpress: fix node name unit-address presence warnings

Commit fa38a82096a1 ("scripts/dtc: Update to upstream version
53bf130b1cdd") added warnings on node name unit-address presence/absence
mismatch in device trees.

This patch fixes those warning on all the juno/vexpress platforms where
unit-address is present in node name while the reg/ranges property is
not present. It also adds unit-address to all smb bus node.
Signed-off-by: default avatarSudeep Holla <sudeep.holla@arm.com>
parent 4739f744
......@@ -97,7 +97,7 @@ watchdog@2a440000 {
timeout-sec = <30>;
};
smb {
smb@08000000 {
compatible = "arm,vexpress,v2m-p1", "simple-bus";
arm,v2m-memory-map = "rs1";
#address-cells = <2>; /* SMB chipselect number and offset */
......
......@@ -105,13 +105,13 @@ scpi {
clocks {
compatible = "arm,scpi-clocks";
scpi_dvfs: scpi_clocks@0 {
scpi_dvfs: scpi-dvfs {
compatible = "arm,scpi-dvfs-clocks";
#clock-cells = <1>;
clock-indices = <0>, <1>, <2>;
clock-output-names = "atlclk", "aplclk","gpuclk";
};
scpi_clk: scpi_clocks@3 {
scpi_clk: scpi-clk {
compatible = "arm,scpi-variable-clocks";
#clock-cells = <1>;
clock-indices = <3>;
......@@ -153,7 +153,7 @@ hdlcd@7ff50000 {
clock-names = "pxlclk";
port {
hdlcd1_output: endpoint@0 {
hdlcd1_output: hdlcd1-endpoint {
remote-endpoint = <&tda998x_1_input>;
};
};
......@@ -167,7 +167,7 @@ hdlcd@7ff60000 {
clock-names = "pxlclk";
port {
hdlcd0_output: endpoint@0 {
hdlcd0_output: hdlcd0-endpoint {
remote-endpoint = <&tda998x_0_input>;
};
};
......@@ -195,7 +195,7 @@ hdmi-transmitter@70 {
compatible = "nxp,tda998x";
reg = <0x70>;
port {
tda998x_0_input: endpoint@0 {
tda998x_0_input: tda998x-0-endpoint {
remote-endpoint = <&hdlcd0_output>;
};
};
......@@ -205,7 +205,7 @@ hdmi-transmitter@71 {
compatible = "nxp,tda998x";
reg = <0x71>;
port {
tda998x_1_input: endpoint@0 {
tda998x_1_input: tda998x-1-endpoint {
remote-endpoint = <&hdlcd1_output>;
};
};
......@@ -242,7 +242,7 @@ memory@80000000 {
<0x00000008 0x80000000 0x1 0x80000000>;
};
smb {
smb@08000000 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
......
......@@ -46,7 +46,7 @@ motherboard {
arm,vexpress,site = <0>;
arm,v2m-memory-map = "rs1";
mb_fixed_3v3: fixedregulator@0 {
mb_fixed_3v3: mcc-sb-3v3 {
compatible = "regulator-fixed";
regulator-name = "MCC_SB_3V3";
regulator-min-microvolt = <3300000>;
......@@ -59,42 +59,42 @@ gpio_keys {
#address-cells = <1>;
#size-cells = <0>;
button@1 {
power-button {
debounce_interval = <50>;
wakeup-source;
linux,code = <116>;
label = "POWER";
gpios = <&iofpga_gpio0 0 0x4>;
};
button@2 {
home-button {
debounce_interval = <50>;
wakeup-source;
linux,code = <102>;
label = "HOME";
gpios = <&iofpga_gpio0 1 0x4>;
};
button@3 {
rlock-button {
debounce_interval = <50>;
wakeup-source;
linux,code = <152>;
label = "RLOCK";
gpios = <&iofpga_gpio0 2 0x4>;
};
button@4 {
vol-up-button {
debounce_interval = <50>;
wakeup-source;
linux,code = <115>;
label = "VOL+";
gpios = <&iofpga_gpio0 3 0x4>;
};
button@5 {
vol-down-button {
debounce_interval = <50>;
wakeup-source;
linux,code = <114>;
label = "VOL-";
gpios = <&iofpga_gpio0 4 0x4>;
};
button@6 {
nmi-button {
debounce_interval = <50>;
wakeup-source;
linux,code = <99>;
......@@ -159,7 +159,7 @@ apbregs@010000 {
compatible = "syscon", "simple-mfd";
reg = <0x010000 0x1000>;
led@08.0 {
led0 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x01>;
......@@ -167,7 +167,7 @@ led@08.0 {
linux,default-trigger = "heartbeat";
default-state = "on";
};
led@08.1 {
led1 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x02>;
......@@ -175,7 +175,7 @@ led@08.1 {
linux,default-trigger = "mmc0";
default-state = "off";
};
led@08.2 {
led2 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x04>;
......@@ -183,7 +183,7 @@ led@08.2 {
linux,default-trigger = "cpu0";
default-state = "off";
};
led@08.3 {
led3 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x08>;
......@@ -191,7 +191,7 @@ led@08.3 {
linux,default-trigger = "cpu1";
default-state = "off";
};
led@08.4 {
led4 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x10>;
......@@ -199,7 +199,7 @@ led@08.4 {
linux,default-trigger = "cpu2";
default-state = "off";
};
led@08.5 {
led5 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x20>;
......@@ -207,14 +207,14 @@ led@08.5 {
linux,default-trigger = "cpu3";
default-state = "off";
};
led@08.6 {
led6 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x40>;
label = "vexpress:6";
default-state = "off";
};
led@08.7 {
led7 {
compatible = "register-bit-led";
offset = <0x08>;
mask = <0x80>;
......
......@@ -104,7 +104,7 @@ pmu {
<0 63 4>;
};
smb {
smb@08000000 {
compatible = "simple-bus";
#address-cells = <2>;
......
......@@ -226,7 +226,7 @@ virtio_block@0130000 {
};
};
v2m_fixed_3v3: fixedregulator@0 {
v2m_fixed_3v3: v2m-3v3 {
compatible = "regulator-fixed";
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
......@@ -238,7 +238,7 @@ mcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
v2m_oscclk1: osc@1 {
v2m_oscclk1: oscclk1 {
/* CLCD clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
......@@ -247,27 +247,27 @@ v2m_oscclk1: osc@1 {
clock-output-names = "v2m:oscclk1";
};
reset@0 {
reset {
compatible = "arm,vexpress-reset";
arm,vexpress-sysreg,func = <5 0>;
};
muxfpga@0 {
muxfpga {
compatible = "arm,vexpress-muxfpga";
arm,vexpress-sysreg,func = <7 0>;
};
shutdown@0 {
shutdown {
compatible = "arm,vexpress-shutdown";
arm,vexpress-sysreg,func = <8 0>;
};
reboot@0 {
reboot {
compatible = "arm,vexpress-reboot";
arm,vexpress-sysreg,func = <9 0>;
};
dvimode@0 {
dvimode {
compatible = "arm,vexpress-dvimode";
arm,vexpress-sysreg,func = <11 0>;
};
......
......@@ -93,7 +93,7 @@ dcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
smbclk: osc@4 {
smbclk: smclk {
/* SMC clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 4>;
......@@ -102,7 +102,7 @@ smbclk: osc@4 {
clock-output-names = "smclk";
};
volt@0 {
volt-vio {
/* VIO to expansion board above */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 0>;
......@@ -112,7 +112,7 @@ volt@0 {
regulator-always-on;
};
volt@1 {
volt-12v {
/* 12V from power connector J6 */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 1>;
......@@ -120,7 +120,7 @@ volt@1 {
regulator-always-on;
};
temp@0 {
temp-fpga {
/* FPGA temperature */
compatible = "arm,vexpress-temp";
arm,vexpress-sysreg,func = <4 0>;
......@@ -128,7 +128,7 @@ temp@0 {
};
};
smb {
smb@08000000 {
compatible = "simple-bus";
#address-cells = <2>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment