Merge tag 'renesas-dt-for-v4.5' of...

Merge tag 'renesas-dt-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Renesas ARM Based SoC DT Updates for v4.5" from Simon Horman:

* henninger: Remove as it is now replaced by silk
* koelsch: Move SPI partitions to subnode
* porter: Add CAN0 and HS-USB support
* r8a7793/gose: Add QSPI, PFC support
* r8a7793: Add GPIO, DMAC, theral, IPMMU support
* r8a7794/alt: Add DU support
* r8a7794: Disable all IPMMU nodes by default
* r8a779[0134]: Use Use SoC specific binding for rcar-dmac
* r8a779[01], r8a73a4, r8a7740, sh73a0: replace gpio-key, wakeup with
  wakeup-source property
* r8a779[14]: Correct "gpio-ranges" properties
* r8a779[14]: Remove bogus imp_clk node
* silk: Add SDHI1 support

* tag 'renesas-dt-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (29 commits)
  ARM: shmobile: alt: add VIN0, ADV7180 DT support
  ARM: shmobile: alt: add I2C1 DT support
  ARM: shmobile: alt: Add pfc pins to DT
  ARM: shmobile: r8a7794: Use SoC specific binding for rcar-dmac nodes
  ARM: shmobile: r8a7793: Use SoC specific binding for rcar-dmac nodes
  ARM: shmobile: r8a7791: Use SoC specific binding for rcar-dmac nodes
  ARM: shmobile: r8a7790: Use SoC specific binding for rcar-dmac nodes
  ARM: shmobile: r8a7793: Add GPIO nodes to device tree
  ARM: shmobile: r8a7794: alt: Enable VGA port
  ARM: shmobile: r8a7794: Add DU node to device tree
  ARM: shmobile: r8a7794: Add DU0 clock
  ARM: shmobile: gose: Add QSPI device to DT
  ARM: shmobile: r8a7793: Add QSPI device to DT
  ARM: shmobile: r8a7793: Add DMAC devices to DT
  ARM: shmobile: koelsch: Move SPI FLASH partitions to subnode
  ARM: shmobile: gose: Configure PFC in DT
  ARM: shmobile: r8a7793: Add PFC to DT
  ARM: shmobile: r8a7793: Add thermal device to DT
  ARM: shmobile: henninger: remove board DT
  ARM: shmobile: porter: add CAN0 DT support
  ...

arch/arm/boot/dts/Makefile

@@ -547,7 +547,6 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 	r8a7778-bockw.dtb \
 	r8a7779-marzen.dtb \
 	r8a7790-lager.dtb \
-	r8a7791-henninger.dtb \
 	r8a7791-koelsch.dtb \
 	r8a7791-porter.dtb \
 	r8a7793-gose.dtb \

arch/arm/boot/dts/r8a73a4-ape6evm.dts

@@ -110,7 +110,7 @@ zero-key {
 			gpios = <&pfc 324 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_0>;
 			label = "S16";
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		menu-key {

arch/arm/boot/dts/r8a7740-armadillo800eva.dts

@@ -85,7 +85,7 @@ power-key {
 			gpios = <&pfc 99 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "SW3";
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		back-key {

arch/arm/boot/dts/r8a7790-lager.dts

@@ -77,28 +77,28 @@ keyboard {
 		button@1 {
 			linux,code = <KEY_1>;
 			label = "SW2-1";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		};
 		button@2 {
 			linux,code = <KEY_2>;
 			label = "SW2-2";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 		};
 		button@3 {
 			linux,code = <KEY_3>;
 			label = "SW2-3";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
 		};
 		button@4 {
 			linux,code = <KEY_4>;
 			label = "SW2-4";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 			gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
 		};

arch/arm/boot/dts/r8a7790.dtsi

@@ -143,7 +143,7 @@ gpio1: gpio@e6051000 {
 		interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
-		gpio-ranges = <&pfc 0 32 32>;
+		gpio-ranges = <&pfc 0 32 30>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7790_CLK_GPIO1>;
@@ -156,7 +156,7 @@ gpio2: gpio@e6052000 {
 		interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
-		gpio-ranges = <&pfc 0 64 32>;
+		gpio-ranges = <&pfc 0 64 30>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7790_CLK_GPIO2>;
@@ -266,7 +266,7 @@ irqc0: interrupt-controller@e61c0000 {
 	};
 
 	dmac0: dma-controller@e6700000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
 		reg = <0 0xe6700000 0 0x20000>;
 		interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
 			      0 200 IRQ_TYPE_LEVEL_HIGH
@@ -297,7 +297,7 @@ dmac0: dma-controller@e6700000 {
 	};
 
 	dmac1: dma-controller@e6720000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
 		reg = <0 0xe6720000 0 0x20000>;
 		interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
 			      0 216 IRQ_TYPE_LEVEL_HIGH
@@ -328,7 +328,7 @@ dmac1: dma-controller@e6720000 {
 	};
 
 	audma0: dma-controller@ec700000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
 		reg = <0 0xec700000 0 0x10000>;
 		interrupts =	<0 346 IRQ_TYPE_LEVEL_HIGH
 				 0 320 IRQ_TYPE_LEVEL_HIGH
@@ -357,7 +357,7 @@ audma0: dma-controller@ec700000 {
 	};
 
 	audma1: dma-controller@ec720000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
 		reg = <0 0xec720000 0 0x10000>;
 		interrupts =	<0 347 IRQ_TYPE_LEVEL_HIGH
 				 0 333 IRQ_TYPE_LEVEL_HIGH

arch/arm/boot/dts/r8a7791-henninger.dts

-/*
- * Device Tree Source for the Henninger board
- *
- * Copyright (C) 2014 Renesas Solutions Corp.
- * Copyright (C) 2014 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7791.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Henninger";
-	compatible = "renesas,henninger", "renesas,r8a7791";
-
-	aliases {
-		serial0 = &scif0;
-	};
-
-	chosen {
-		bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp";
-		stdout-path = &scif0;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0 0x40000000>;
-	};
-
-	memory@200000000 {
-		device_type = "memory";
-		reg = <2 0x00000000 0 0x40000000>;
-	};
-
-	vcc_sdhi0: regulator@0 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI0 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	vccq_sdhi0: regulator@1 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI0 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
-	};
-
-	vcc_sdhi2: regulator@2 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "SDHI2 Vcc";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	vccq_sdhi2: regulator@3 {
-		compatible = "regulator-gpio";
-
-		regulator-name = "SDHI2 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1
-			  1800000 0>;
-	};
-};
-
-&extal_clk {
-	clock-frequency = <20000000>;
-};
-
-&pfc {
-	scif0_pins: serial0 {
-		renesas,groups = "scif0_data_d";
-		renesas,function = "scif0";
-	};
-
-	ether_pins: ether {
-		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
-		renesas,function = "eth";
-	};
-
-	phy1_pins: phy1 {
-		renesas,groups = "intc_irq0";
-		renesas,function = "intc";
-	};
-
-	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
-		renesas,function = "sdhi0";
-	};
-
-	sdhi2_pins: sd2 {
-		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
-		renesas,function = "sdhi2";
-	};
-
-	i2c2_pins: i2c2 {
-		renesas,groups = "i2c2";
-		renesas,function = "i2c2";
-	};
-
-	qspi_pins: spi0 {
-		renesas,groups = "qspi_ctrl", "qspi_data4";
-		renesas,function = "qspi";
-	};
-
-	msiof0_pins: spi1 {
-		renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
-				 "msiof0_tx";
-		renesas,function = "msiof0";
-	};
-
-	usb0_pins: usb0 {
-		renesas,groups = "usb0";
-		renesas,function = "usb0";
-	};
-
-	usb1_pins: usb1 {
-		renesas,groups = "usb1";
-		renesas,function = "usb1";
-	};
-
-	vin0_pins: vin0 {
-		renesas,groups = "vin0_data8", "vin0_clk";
-		renesas,function = "vin0";
-	};
-
-	can0_pins: can0 {
-		renesas,groups = "can0_data";
-		renesas,function = "can0";
-	};
-};
-
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&ether {
-	pinctrl-0 = <&ether_pins &phy1_pins>;
-	pinctrl-names = "default";
-
-	phy-handle = <&phy1>;
-	renesas,ether-link-active-low;
-	status = "okay";
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-		interrupt-parent = <&irqc0>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		micrel,led-mode = <1>;
-	};
-};
-
-&sata0 {
-	status = "okay";
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi0>;
-	vqmmc-supply = <&vccq_sdhi0>;
-	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&sdhi2 {
-	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&vcc_sdhi2>;
-	vqmmc-supply = <&vccq_sdhi2>;
-	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-0 = <&i2c2_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	composite-in@20 {
-		compatible = "adi,adv7180";
-		reg = <0x20>;
-		remote = <&vin0>;
-
-		port {
-			adv7180: endpoint {
-				bus-width = <8>;
-				remote-endpoint = <&vin0ep>;
-			};
-		};
-	};
-};
-
-&qspi {
-	pinctrl-0 = <&qspi_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spansion,s25fl512s", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <30000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		m25p,fast-read;
-
-		partition@0 {
-			label = "loader_prg";
-			reg = <0x00000000 0x00040000>;
-			read-only;
-		};
-		partition@40000 {
-			label = "user_prg";
-			reg = <0x00040000 0x00400000>;
-			read-only;
-		};
-		partition@440000 {
-			label = "flash_fs";
-			reg = <0x00440000 0x03bc0000>;
-		};
-	};
-};
-
-&msiof0 {
-	pinctrl-0 = <&msiof0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	pmic@0 {
-		compatible = "renesas,r2a11302ft";
-		reg = <0>;
-		spi-max-frequency = <6000000>;
-		spi-cpol;
-		spi-cpha;
-	};
-};
-
-&pci0 {
-	status = "okay";
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-};
-
-&pci1 {
-	status = "okay";
-	pinctrl-0 = <&usb1_pins>;
-	pinctrl-names = "default";
-};
-
-&hsusb {
-	status = "okay";
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
-};
-
-&usbphy {
-	status = "okay";
-};
-
-&pcie_bus_clk {
-	status = "okay";
-};
-
-&pciec {
-	status = "okay";
-};
-
-/* composite video input */
-&vin0 {
-	status = "okay";
-	pinctrl-0 = <&vin0_pins>;
-	pinctrl-names = "default";
-
-	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vin0ep: endpoint {
-			remote-endpoint = <&adv7180>;
-			bus-width = <8>;
-		};
-	};
-};
-
-&can0 {
-	pinctrl-0 = <&can0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};

arch/arm/boot/dts/r8a7791-koelsch.dts

@@ -79,77 +79,77 @@ key-1 {
 			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_1>;
 			label = "SW2-1";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-2 {
 			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_2>;
 			label = "SW2-2";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-3 {
 			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_3>;
 			label = "SW2-3";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-4 {
 			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_4>;
 			label = "SW2-4";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-a {
 			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_A>;
 			label = "SW30";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-b {
 			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_B>;
 			label = "SW31";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-c {
 			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_C>;
 			label = "SW32";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-d {
 			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_D>;
 			label = "SW33";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-e {
 			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_E>;
 			label = "SW34";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-f {
 			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_F>;
 			label = "SW35";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-g {
 			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_G>;
 			label = "SW36";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 	};
@@ -479,8 +479,6 @@ &qspi {
 	status = "okay";
 
 	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "spansion,s25fl512s", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <30000000>;
@@ -490,19 +488,24 @@ flash: flash@0 {
 		spi-cpol;
 		m25p,fast-read;
 
-		partition@0 {
-			label = "loader";
-			reg = <0x00000000 0x00080000>;
-			read-only;
-		};
-		partition@80000 {
-			label = "user";
-			reg = <0x00080000 0x00580000>;
-			read-only;
-		};
-		partition@600000 {
-			label = "flash";
-			reg = <0x00600000 0x03a00000>;
+		partitions {
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader";
+				reg = <0x00000000 0x00080000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "user";
+				reg = <0x00080000 0x00580000>;
+				read-only;
+			};
+			partition@600000 {
+				label = "flash";
+				reg = <0x00600000 0x03a00000>;
+			};
 		};
 	};
 };

arch/arm/boot/dts/r8a7791-porter.dts

@@ -134,6 +134,11 @@ vin0_pins: vin0 {
 		renesas,groups = "vin0_data8", "vin0_clk";
 		renesas,function = "vin0";
 	};
+
+	can0_pins: can0 {
+		renesas,groups = "can0_data";
+		renesas,function = "can0";
+	};
 };
 
 &scif0 {
@@ -269,6 +274,14 @@ &pci1 {
 	status = "okay";
 };
 
+&hsusb {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+};
+
 &usbphy {
 	status = "okay";
 };
@@ -280,3 +293,10 @@ &pcie_bus_clk {
 &pciec {
 	status = "okay";
 };
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};

arch/arm/boot/dts/r8a7791.dtsi

@@ -100,7 +100,7 @@ gpio1: gpio@e6051000 {
 		interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
-		gpio-ranges = <&pfc 0 32 32>;
+		gpio-ranges = <&pfc 0 32 26>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7791_CLK_GPIO1>;
@@ -255,7 +255,7 @@ irqc0: interrupt-controller@e61c0000 {
 	};
 
 	dmac0: dma-controller@e6700000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac";
 		reg = <0 0xe6700000 0 0x20000>;
 		interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
 			      0 200 IRQ_TYPE_LEVEL_HIGH
@@ -286,7 +286,7 @@ dmac0: dma-controller@e6700000 {
 	};
 
 	dmac1: dma-controller@e6720000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac";
 		reg = <0 0xe6720000 0 0x20000>;
 		interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
 			      0 216 IRQ_TYPE_LEVEL_HIGH
@@ -317,7 +317,7 @@ dmac1: dma-controller@e6720000 {
 	};
 
 	audma0: dma-controller@ec700000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac";
 		reg = <0 0xec700000 0 0x10000>;
 		interrupts =	<0 346 IRQ_TYPE_LEVEL_HIGH
 				 0 320 IRQ_TYPE_LEVEL_HIGH
@@ -346,7 +346,7 @@ audma0: dma-controller@ec700000 {
 	};
 
 	audma1: dma-controller@ec720000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac";
 		reg = <0 0xec720000 0 0x10000>;
 		interrupts =	<0 347 IRQ_TYPE_LEVEL_HIGH
 				 0 333 IRQ_TYPE_LEVEL_HIGH
@@ -1163,14 +1163,6 @@ m2_clk: m2_clk {
 			clock-mult = <1>;
 			clock-output-names = "m2";
 		};
-		imp_clk: imp_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <4>;
-			clock-mult = <1>;
-			clock-output-names = "imp";
-		};
 		rclk_clk: rclk_clk {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;

arch/arm/boot/dts/r8a7793-gose.dts

@@ -37,7 +37,37 @@ &extal_clk {
 	clock-frequency = <20000000>;
 };
 
+&pfc {
+	scif0_pins: serial0 {
+		renesas,groups = "scif0_data_d";
+		renesas,function = "scif0";
+	};
+
+	scif1_pins: serial1 {
+		renesas,groups = "scif1_data_d";
+		renesas,function = "scif1";
+	};
+
+	ether_pins: ether {
+		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
+		renesas,function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		renesas,groups = "intc_irq0";
+		renesas,function = "intc";
+	};
+
+	qspi_pins: spi0 {
+		renesas,groups = "qspi_ctrl", "qspi_data4";
+		renesas,function = "qspi";
+	};
+};
+
 &ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
 	phy-handle = <&phy1>;
 	renesas,ether-link-active-low;
 	status = "okay";
@@ -55,9 +85,53 @@ &cmt0 {
 };
 
 &scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
 	status = "okay";
 };
 
 &scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
 	status = "okay";
 };
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-cpol;
+		spi-cpha;
+		m25p,fast-read;
+
+		partitions {
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "user";
+				reg = <0x00040000 0x00400000>;
+				read-only;
+			};
+			partition@440000 {
+				label = "flash";
+				reg = <0x00440000 0x03bc0000>;
+			};
+		};
+	};
+};

arch/arm/boot/dts/r8a7793.dtsi

@@ -18,6 +18,10 @@ / {
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		spi0 = &qspi;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -53,6 +57,118 @@ gic: interrupt-controller@f1001000 {
 		interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
+	gpio0: gpio@e6050000 {
+		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		reg = <0 0xe6050000 0 0x50>;
+		interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 0 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7793_CLK_GPIO0>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	gpio1: gpio@e6051000 {
+		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		reg = <0 0xe6051000 0 0x50>;
+		interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 32 26>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7793_CLK_GPIO1>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	gpio2: gpio@e6052000 {
+		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		reg = <0 0xe6052000 0 0x50>;
+		interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 64 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7793_CLK_GPIO2>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	gpio3: gpio@e6053000 {
+		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		reg = <0 0xe6053000 0 0x50>;
+		interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 96 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7793_CLK_GPIO3>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	gpio4: gpio@e6054000 {
+		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		reg = <0 0xe6054000 0 0x50>;
+		interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 128 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7793_CLK_GPIO4>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	gpio5: gpio@e6055000 {
+		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		reg = <0 0xe6055000 0 0x50>;
+		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 160 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7793_CLK_GPIO5>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	gpio6: gpio@e6055400 {
+		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		reg = <0 0xe6055400 0 0x50>;
+		interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 192 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7793_CLK_GPIO6>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	gpio7: gpio@e6055800 {
+		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		reg = <0 0xe6055800 0 0x50>;
+		interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 224 26>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7793_CLK_GPIO7>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	thermal@e61f0000 {
+		compatible = "renesas,thermal-r8a7793", "renesas,rcar-thermal";
+		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
+		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp5_clks R8A7793_CLK_THERMAL>;
+		power-domains = <&cpg_clocks>;
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
@@ -114,6 +230,74 @@ irqc0: interrupt-controller@e61c0000 {
 		power-domains = <&cpg_clocks>;
 	};
 
+	pfc: pfc@e6060000 {
+		compatible = "renesas,pfc-r8a7793";
+		reg = <0 0xe6060000 0 0x250>;
+		#gpio-range-cells = <3>;
+	};
+
+	dmac0: dma-controller@e6700000 {
+		compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
+		reg = <0 0xe6700000 0 0x20000>;
+		interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
+			      0 200 IRQ_TYPE_LEVEL_HIGH
+			      0 201 IRQ_TYPE_LEVEL_HIGH
+			      0 202 IRQ_TYPE_LEVEL_HIGH
+			      0 203 IRQ_TYPE_LEVEL_HIGH
+			      0 204 IRQ_TYPE_LEVEL_HIGH
+			      0 205 IRQ_TYPE_LEVEL_HIGH
+			      0 206 IRQ_TYPE_LEVEL_HIGH
+			      0 207 IRQ_TYPE_LEVEL_HIGH
+			      0 208 IRQ_TYPE_LEVEL_HIGH
+			      0 209 IRQ_TYPE_LEVEL_HIGH
+			      0 210 IRQ_TYPE_LEVEL_HIGH
+			      0 211 IRQ_TYPE_LEVEL_HIGH
+			      0 212 IRQ_TYPE_LEVEL_HIGH
+			      0 213 IRQ_TYPE_LEVEL_HIGH
+			      0 214 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12", "ch13", "ch14";
+		clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC0>;
+		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
+		#dma-cells = <1>;
+		dma-channels = <15>;
+	};
+
+	dmac1: dma-controller@e6720000 {
+		compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
+		reg = <0 0xe6720000 0 0x20000>;
+		interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
+			      0 216 IRQ_TYPE_LEVEL_HIGH
+			      0 217 IRQ_TYPE_LEVEL_HIGH
+			      0 218 IRQ_TYPE_LEVEL_HIGH
+			      0 219 IRQ_TYPE_LEVEL_HIGH
+			      0 308 IRQ_TYPE_LEVEL_HIGH
+			      0 309 IRQ_TYPE_LEVEL_HIGH
+			      0 310 IRQ_TYPE_LEVEL_HIGH
+			      0 311 IRQ_TYPE_LEVEL_HIGH
+			      0 312 IRQ_TYPE_LEVEL_HIGH
+			      0 313 IRQ_TYPE_LEVEL_HIGH
+			      0 314 IRQ_TYPE_LEVEL_HIGH
+			      0 315 IRQ_TYPE_LEVEL_HIGH
+			      0 316 IRQ_TYPE_LEVEL_HIGH
+			      0 317 IRQ_TYPE_LEVEL_HIGH
+			      0 318 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12", "ch13", "ch14";
+		clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC1>;
+		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
+		#dma-cells = <1>;
+		dma-channels = <15>;
+	};
+
 	scif0: serial@e6e60000 {
 		compatible = "renesas,scif-r8a7793", "renesas,scif";
 		reg = <0 0xe6e60000 0 64>;
@@ -146,6 +330,20 @@ ether: ethernet@ee700000 {
 		status = "disabled";
 	};
 
+	qspi: spi@e6b10000 {
+		compatible = "renesas,qspi-r8a7793", "renesas,qspi";
+		reg = <0 0xe6b10000 0 0x2c>;
+		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7793_CLK_QSPI_MOD>;
+		dmas = <&dmac0 0x17>, <&dmac0 0x18>;
+		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -299,6 +497,16 @@ R8A7793_CLK_VSP1_S
 				"tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
 				"vsp1-du0", "vsps";
 		};
+		mstp2_clks: mstp2_clks@e6150138 {
+			compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
+			clocks = <&zs_clk>, <&zs_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7793_CLK_SYS_DMAC1 R8A7793_CLK_SYS_DMAC0
+			>;
+			clock-output-names = "sys-dmac1", "sys-dmac0";
+		};
 		mstp3_clks: mstp3_clks@e615013c {
 			compatible = "renesas,r8a7793-mstp-clocks",
 				     "renesas,cpg-mstp-clocks";
@@ -329,6 +537,14 @@ mstp4_clks: mstp4_clks@e6150140 {
 			clock-indices = <R8A7793_CLK_IRQC>;
 			clock-output-names = "irqc";
 		};
+		mstp5_clks: mstp5_clks@e6150144 {
+			compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
+			clocks = <&extal_clk>;
+			#clock-cells = <1>;
+			clock-indices = <R8A7793_CLK_THERMAL>;
+			clock-output-names = "thermal";
+		};
 		mstp7_clks: mstp7_clks@e615014c {
 			compatible = "renesas,r8a7793-mstp-clocks",
 				     "renesas,cpg-mstp-clocks";
@@ -369,6 +585,84 @@ R8A7793_CLK_SATA0
 				"ipmmu_sgx", "vin2", "vin1", "vin0", "ether",
 				"sata1", "sata0";
 		};
+		mstp9_clks: mstp9_clks@e6150994 {
+			compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
+			clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&cpg_clocks R8A7793_CLK_QSPI>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7793_CLK_GPIO7 R8A7793_CLK_GPIO6
+				R8A7793_CLK_GPIO5 R8A7793_CLK_GPIO4
+				R8A7793_CLK_GPIO3 R8A7793_CLK_GPIO2
+				R8A7793_CLK_GPIO1 R8A7793_CLK_GPIO0
+				R8A7793_CLK_QSPI_MOD
+			>;
+			clock-output-names =
+				"gpio7", "gpio6", "gpio5", "gpio4",
+				"gpio3", "gpio2", "gpio1", "gpio0",
+				"qspi_mod";
+		};
+	};
+
+	ipmmu_sy0: mmu@e6280000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xe6280000 0 0x1000>;
+		interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 224 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_sy1: mmu@e6290000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xe6290000 0 0x1000>;
+		interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_ds: mmu@e6740000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xe6740000 0 0x1000>;
+		interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 199 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_mp: mmu@ec680000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xec680000 0 0x1000>;
+		interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_mx: mmu@fe951000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xfe951000 0 0x1000>;
+		interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 221 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_rt: mmu@ffc80000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xffc80000 0 0x1000>;
+		interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
 	};
 
+	ipmmu_gp: mmu@e62a0000 {
+		compatible = "renesas,ipmmu-vmsa";
+		reg = <0 0xe62a0000 0 0x1000>;
+		interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 261 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
 };

arch/arm/boot/dts/r8a7794-alt.dts

@@ -33,12 +33,100 @@ lbsc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb1>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	x2_clk: x2-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	x13_clk: x13-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+};
+
+&du {
+	status = "okay";
+
+	clocks = <&mstp7_clks R8A7794_CLK_DU0>,
+		 <&mstp7_clks R8A7794_CLK_DU0>,
+		 <&x13_clk>, <&x2_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
 };
 
 &extal_clk {
 	clock-frequency = <20000000>;
 };
 
+&pfc {
+	scif2_pins: serial2 {
+		renesas,groups = "scif2_data";
+		renesas,function = "scif2";
+	};
+
+	ether_pins: ether {
+		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
+		renesas,function = "eth";
+	};
+
+	ether_b_pins: ether {
+		renesas,groups = "eth_link_b", "eth_mdio_b", "eth_rmii_b";
+		renesas,function = "eth";
+	};
+
+	i2c1_pins: i2c1 {
+		renesas,groups = "i2c1";
+		renesas,function = "i2c1";
+	};
+
+	vin0_pins: vin0 {
+		renesas,groups = "vin0_data8", "vin0_clk";
+		renesas,function = "vin0";
+	};
+};
+
 &cmt0 {
 	status = "okay";
 };
@@ -56,6 +144,43 @@ phy1: ethernet-phy@1 {
 	};
 };
 
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	composite-in@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+		remote = <&vin0>;
+
+		port {
+			adv7180: endpoint {
+				bus-width = <8>;
+				remote-endpoint = <&vin0ep>;
+			};
+		};
+	};
+};
+
+&vin0 {
+	status = "okay";
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin0ep: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};
+
 &scif2 {
 	status = "okay";
 };

arch/arm/boot/dts/r8a7794-silk.dts

@@ -12,6 +12,7 @@
 
 /dts-v1/;
 #include "r8a7794.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "SILK";
@@ -39,6 +40,30 @@ d3_3v: regulator@0 {
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	vcc_sdhi1: regulator@3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi1: regulator@4 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
 };
 
 &extal_clk {
@@ -71,6 +96,11 @@ mmcif0_pins: mmcif0 {
 		renesas,function = "mmc";
 	};
 
+	sdhi1_pins: sd1 {
+		renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
+		renesas,function = "sdhi1";
+	};
+
 	qspi_pins: spi0 {
 		renesas,groups = "qspi_ctrl", "qspi_data4";
 		renesas,function = "qspi";
@@ -147,6 +177,16 @@ &mmcif0 {
 	status = "okay";
 };
 
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi1>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
 &qspi {
 	pinctrl-0 = <&qspi_pins>;
 	pinctrl-names = "default";

arch/arm/boot/dts/r8a7794.dtsi

@@ -221,7 +221,7 @@ pfc: pin-controller@e6060000 {
 	};
 
 	dmac0: dma-controller@e6700000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac";
 		reg = <0 0xe6700000 0 0x20000>;
 		interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
 			      0 200 IRQ_TYPE_LEVEL_HIGH
@@ -252,7 +252,7 @@ dmac0: dma-controller@e6700000 {
 	};
 
 	dmac1: dma-controller@e6720000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac";
 		reg = <0 0xe6720000 0 0x20000>;
 		interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
 			      0 216 IRQ_TYPE_LEVEL_HIGH
@@ -750,6 +750,34 @@ usb2: usb-channel@2 {
 		};
 	};
 
+	du: display@feb00000 {
+		compatible = "renesas,du-r8a7794";
+		reg = <0 0xfeb00000 0 0x40000>;
+		reg-names = "du";
+		interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 268 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_DU0>,
+			 <&mstp7_clks R8A7794_CLK_DU0>;
+		clock-names = "du.0", "du.1";
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				du_out_rgb0: endpoint {
+				};
+			};
+			port@1 {
+				reg = <1>;
+				du_out_rgb1: endpoint {
+				};
+			};
+		};
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -879,14 +907,6 @@ m2_clk: m2_clk {
 			clock-mult = <1>;
 			clock-output-names = "m2";
 		};
-		imp_clk: imp_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <4>;
-			clock-mult = <1>;
-			clock-output-names = "imp";
-		};
 		rclk_clk: rclk_clk {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
@@ -1025,19 +1045,20 @@ mstp7_clks: mstp7_clks@e615014c {
 			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
 			clocks = <&mp_clk>, <&mp_clk>,
 				 <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
-				 <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>;
+				 <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+				 <&zx_clk>;
 			#clock-cells = <1>;
 			clock-indices = <
 				R8A7794_CLK_EHCI R8A7794_CLK_HSUSB
 				R8A7794_CLK_HSCIF2 R8A7794_CLK_SCIF5
 				R8A7794_CLK_SCIF4 R8A7794_CLK_HSCIF1 R8A7794_CLK_HSCIF0
 				R8A7794_CLK_SCIF3 R8A7794_CLK_SCIF2 R8A7794_CLK_SCIF1
-				R8A7794_CLK_SCIF0
+				R8A7794_CLK_SCIF0 R8A7794_CLK_DU0
 			>;
 			clock-output-names =
 				"ehci", "hsusb",
 				"hscif2", "scif5", "scif4", "hscif1", "hscif0",
-				"scif3", "scif2", "scif1", "scif0";
+				"scif3", "scif2", "scif1", "scif0", "du0";
 		};
 		mstp8_clks: mstp8_clks@e6150990 {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -1105,6 +1126,7 @@ ipmmu_ds: mmu@e6740000 {
 		interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 199 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
+		status = "disabled";
 	};
 
 	ipmmu_mp: mmu@ec680000 {
@@ -1121,6 +1143,7 @@ ipmmu_mx: mmu@fe951000 {
 		interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 221 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
+		status = "disabled";
 	};
 
 	ipmmu_gp: mmu@e62a0000 {

arch/arm/boot/dts/sh73a0-kzm9g.dts

@@ -147,7 +147,7 @@ home-key {
 			gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 			label = "SW1";
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 

include/dt-bindings/clock/r8a7794-clock.h

@@ -79,6 +79,7 @@
 #define R8A7794_CLK_SCIF2		19
 #define R8A7794_CLK_SCIF1		20
 #define R8A7794_CLK_SCIF0		21
+#define R8A7794_CLK_DU0			24
 
 /* MSTP8 */
 #define R8A7794_CLK_VIN1		10