USB HID: move usbhid code from drivers/usb/input to drivers/hid/usbhid

Separate usbhid code into dedicated drivers/hid/usbhid directory as
discussed previously with Greg, so that it eases maintaineance process.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/hid/Kconfig

@@ -36,5 +36,7 @@ config HID_DEBUG
 
 	If unsure, say N
 
+source "drivers/hid/usbhid/Kconfig"
+
 endmenu
 

drivers/hid/Makefile

@@ -6,3 +6,7 @@ hid-objs			:= hid-core.o hid-input.o
 obj-$(CONFIG_HID)		+= hid.o
 hid-$(CONFIG_HID_DEBUG)		+= hid-debug.o
 
+obj-$(CONFIG_USB_HID)		+= usbhid/
+obj-$(CONFIG_USB_MOUSE)		+= usbhid/
+obj-$(CONFIG_USB_KBD)		+= usbhid/
+

drivers/hid/usbhid/Kconfig

+comment "USB Input Devices"
+	depends on USB
+
+config USB_HID
+	tristate "USB Human Interface Device (full HID) support"
+	default y
+	depends on USB && INPUT
+	select HID
+	---help---
+	  Say Y here if you want full HID support to connect USB keyboards,
+	  mice, joysticks, graphic tablets, or any other HID based devices
+	  to your computer via USB, as well as Uninterruptible Power Supply
+	  (UPS) and monitor control devices.
+
+	  You can't use this driver and the HIDBP (Boot Protocol) keyboard
+	  and mouse drivers at the same time. More information is available:
+	  <file:Documentation/input/input.txt>.
+
+	  If unsure, say Y.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called usbhid.
+
+comment "Input core support is needed for USB HID input layer or HIDBP support"
+	depends on USB_HID && INPUT=n
+
+config USB_HIDINPUT_POWERBOOK
+	bool "Enable support for iBook/PowerBook special keys"
+	default n
+	depends on USB_HID
+	help
+	  Say Y here if you want support for the special keys (Fn, Numlock) on
+	  Apple iBooks and PowerBooks.
+
+	  If unsure, say N.
+
+config HID_FF
+	bool "Force feedback support (EXPERIMENTAL)"
+	depends on USB_HID && EXPERIMENTAL
+	help
+	  Say Y here is you want force feedback support for a few HID devices.
+	  See below for a list of supported devices.
+
+	  See <file:Documentation/input/ff.txt> for a description of the force
+	  feedback API.
+
+	  If unsure, say N.
+
+config HID_PID
+	bool "PID device support"
+	depends on HID_FF
+	help
+	  Say Y here if you have a PID-compliant device and wish to enable force
+	  feedback for it. Microsoft Sidewinder Force Feedback 2 is one of such
+	  devices.
+
+config LOGITECH_FF
+	bool "Logitech devices support"
+	depends on HID_FF
+	select INPUT_FF_MEMLESS if USB_HID
+	help
+	  Say Y here if you have one of these devices:
+	  - Logitech WingMan Cordless RumblePad
+	  - Logitech WingMan Cordless RumblePad 2
+	  - Logitech WingMan Force 3D
+	  - Logitech Formula Force EX
+	  - Logitech MOMO Force wheel
+
+	  and if you want to enable force feedback for them.
+	  Note: if you say N here, this device will still be supported, but without
+	  force feedback.
+
+config PANTHERLORD_FF
+	bool "PantherLord USB/PS2 2in1 Adapter support"
+	depends on HID_FF
+	select INPUT_FF_MEMLESS if USB_HID
+	help
+	  Say Y here if you have a PantherLord USB/PS2 2in1 Adapter and want
+	  to enable force feedback support for it.
+
+config THRUSTMASTER_FF
+	bool "ThrustMaster FireStorm Dual Power 2 support (EXPERIMENTAL)"
+	depends on HID_FF && EXPERIMENTAL
+	select INPUT_FF_MEMLESS if USB_HID
+	help
+	  Say Y here if you have a THRUSTMASTER FireStore Dual Power 2,
+	  and want to enable force feedback support for it.
+	  Note: if you say N here, this device will still be supported, but without
+	  force feedback.
+
+config ZEROPLUS_FF
+	bool "Zeroplus based game controller support"
+	depends on HID_FF
+	select INPUT_FF_MEMLESS if USB_HID
+	help
+	  Say Y here if you have a Zeroplus based game controller and want to
+	  enable force feedback for it.
+
+config USB_HIDDEV
+	bool "/dev/hiddev raw HID device support"
+	depends on USB_HID
+	help
+	  Say Y here if you want to support HID devices (from the USB
+	  specification standpoint) that aren't strictly user interface
+	  devices, like monitor controls and Uninterruptable Power Supplies.
+
+	  This module supports these devices separately using a separate
+	  event interface on /dev/usb/hiddevX (char 180:96 to 180:111).
+
+	  If unsure, say Y.
+
+menu "USB HID Boot Protocol drivers"
+	depends on USB!=n && USB_HID!=y
+
+config USB_KBD
+	tristate "USB HIDBP Keyboard (simple Boot) support"
+	depends on USB && INPUT
+	---help---
+	  Say Y here only if you are absolutely sure that you don't want
+	  to use the generic HID driver for your USB keyboard and prefer
+	  to use the keyboard in its limited Boot Protocol mode instead.
+
+	  This is almost certainly not what you want.  This is mostly
+	  useful for embedded applications or simple keyboards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called usbkbd.
+
+	  If even remotely unsure, say N.
+
+config USB_MOUSE
+	tristate "USB HIDBP Mouse (simple Boot) support"
+	depends on USB && INPUT
+	---help---
+	  Say Y here only if you are absolutely sure that you don't want
+	  to use the generic HID driver for your USB mouse and prefer
+	  to use the mouse in its limited Boot Protocol mode instead.
+
+	  This is almost certainly not what you want.  This is mostly
+	  useful for embedded applications or simple mice.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called usbmouse.
+
+	  If even remotely unsure, say N.
+
+endmenu
+
+

drivers/hid/usbhid/Makefile

+#
+# Makefile for the USB input drivers
+#
+
+# Multipart objects.
+usbhid-objs	:= hid-core.o
+
+# Optional parts of multipart objects.
+
+ifeq ($(CONFIG_USB_HIDDEV),y)
+	usbhid-objs	+= hiddev.o
+endif
+ifeq ($(CONFIG_HID_PID),y)
+	usbhid-objs	+= hid-pidff.o
+endif
+ifeq ($(CONFIG_LOGITECH_FF),y)
+	usbhid-objs	+= hid-lgff.o
+endif
+ifeq ($(CONFIG_PANTHERLORD_FF),y)
+	usbhid-objs	+= hid-plff.o
+endif
+ifeq ($(CONFIG_THRUSTMASTER_FF),y)
+	usbhid-objs	+= hid-tmff.o
+endif
+ifeq ($(CONFIG_ZEROPLUS_FF),y)
+	usbhid-objs	+= hid-zpff.o
+endif
+ifeq ($(CONFIG_HID_FF),y)
+	usbhid-objs	+= hid-ff.o
+endif
+
+obj-$(CONFIG_USB_HID)		+= usbhid.o
+obj-$(CONFIG_USB_KBD)		+= usbkbd.o
+obj-$(CONFIG_USB_MOUSE)		+= usbmouse.o
+

drivers/usb/Makefile

@@ -27,10 +27,7 @@ obj-$(CONFIG_USB)		+= storage/
 obj-$(CONFIG_USB_ACECAD)	+= input/
 obj-$(CONFIG_USB_AIPTEK)	+= input/
 obj-$(CONFIG_USB_ATI_REMOTE)	+= input/
-obj-$(CONFIG_USB_HID)		+= input/
-obj-$(CONFIG_USB_KBD)		+= input/
 obj-$(CONFIG_USB_KBTAB)		+= input/
-obj-$(CONFIG_USB_MOUSE)		+= input/
 obj-$(CONFIG_USB_MTOUCH)	+= input/
 obj-$(CONFIG_USB_POWERMATE)	+= input/
 obj-$(CONFIG_USB_WACOM)		+= input/

drivers/usb/input/Kconfig

@@ -4,151 +4,6 @@
 comment "USB Input Devices"
 	depends on USB
 
-config USB_HID
-	tristate "USB Human Interface Device (full HID) support"
-	default y
-	depends on USB && INPUT
-	select HID
-	---help---
-	  Say Y here if you want full HID support to connect USB keyboards,
-	  mice, joysticks, graphic tablets, or any other HID based devices
-	  to your computer via USB, as well as Uninterruptible Power Supply
-	  (UPS) and monitor control devices.
-
-	  You can't use this driver and the HIDBP (Boot Protocol) keyboard
-	  and mouse drivers at the same time. More information is available:
-	  <file:Documentation/input/input.txt>.
-
-	  If unsure, say Y.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called usbhid.
-
-comment "Input core support is needed for USB HID input layer or HIDBP support"
-	depends on USB_HID && INPUT=n
-
-config USB_HIDINPUT_POWERBOOK
-	bool "Enable support for iBook/PowerBook special keys"
-	default n
-	depends on USB_HID
-	help
-	  Say Y here if you want support for the special keys (Fn, Numlock) on
-	  Apple iBooks and PowerBooks.
-
-	  If unsure, say N.
-
-config HID_FF
-	bool "Force feedback support (EXPERIMENTAL)"
-	depends on USB_HID && EXPERIMENTAL
-	help
-	  Say Y here is you want force feedback support for a few HID devices.
-	  See below for a list of supported devices.
-
-	  See <file:Documentation/input/ff.txt> for a description of the force
-	  feedback API.
-
-	  If unsure, say N.
-
-config HID_PID
-	bool "PID device support"
-	depends on HID_FF
-	help
-	  Say Y here if you have a PID-compliant device and wish to enable force
-	  feedback for it. Microsoft Sidewinder Force Feedback 2 is one of such
-	  devices.
-
-config LOGITECH_FF
-	bool "Logitech devices support"
-	depends on HID_FF
-	select INPUT_FF_MEMLESS if USB_HID
-	help
-	  Say Y here if you have one of these devices:
-	  - Logitech WingMan Cordless RumblePad
-	  - Logitech WingMan Cordless RumblePad 2
-	  - Logitech WingMan Force 3D
-	  - Logitech Formula Force EX
-	  - Logitech MOMO Force wheel
-
-	  and if you want to enable force feedback for them.
-	  Note: if you say N here, this device will still be supported, but without
-	  force feedback.
-
-config PANTHERLORD_FF
-	bool "PantherLord USB/PS2 2in1 Adapter support"
-	depends on HID_FF
-	select INPUT_FF_MEMLESS if USB_HID
-	help
-	  Say Y here if you have a PantherLord USB/PS2 2in1 Adapter and want
-	  to enable force feedback support for it.
-
-config THRUSTMASTER_FF
-	bool "ThrustMaster FireStorm Dual Power 2 support (EXPERIMENTAL)"
-	depends on HID_FF && EXPERIMENTAL
-	select INPUT_FF_MEMLESS if USB_HID
-	help
-	  Say Y here if you have a THRUSTMASTER FireStore Dual Power 2,
-	  and want to enable force feedback support for it.
-	  Note: if you say N here, this device will still be supported, but without
-	  force feedback.
-
-config ZEROPLUS_FF
-	bool "Zeroplus based game controller support"
-	depends on HID_FF
-	select INPUT_FF_MEMLESS if USB_HID
-	help
-	  Say Y here if you have a Zeroplus based game controller and want to
-	  enable force feedback for it.
-
-config USB_HIDDEV
-	bool "/dev/hiddev raw HID device support"
-	depends on USB_HID
-	help
-	  Say Y here if you want to support HID devices (from the USB
-	  specification standpoint) that aren't strictly user interface
-	  devices, like monitor controls and Uninterruptable Power Supplies.
-
-	  This module supports these devices separately using a separate
-	  event interface on /dev/usb/hiddevX (char 180:96 to 180:111).
-
-	  If unsure, say Y.
-
-menu "USB HID Boot Protocol drivers"
-	depends on USB!=n && USB_HID!=y
-
-config USB_KBD
-	tristate "USB HIDBP Keyboard (simple Boot) support"
-	depends on USB && INPUT
-	---help---
-	  Say Y here only if you are absolutely sure that you don't want
-	  to use the generic HID driver for your USB keyboard and prefer
-	  to use the keyboard in its limited Boot Protocol mode instead.
-
-	  This is almost certainly not what you want.  This is mostly
-	  useful for embedded applications or simple keyboards.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called usbkbd.
-
-	  If even remotely unsure, say N.
-
-config USB_MOUSE
-	tristate "USB HIDBP Mouse (simple Boot) support"
-	depends on USB && INPUT
-	---help---
-	  Say Y here only if you are absolutely sure that you don't want
-	  to use the generic HID driver for your USB mouse and prefer
-	  to use the mouse in its limited Boot Protocol mode instead.
-
-	  This is almost certainly not what you want.  This is mostly
-	  useful for embedded applications or simple mice.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called usbmouse.
-
-	  If even remotely unsure, say N.
-
-endmenu
-
 config USB_AIPTEK
 	tristate "Aiptek 6000U/8000U tablet support"
 	depends on USB && INPUT

drivers/usb/input/Makefile

@@ -4,40 +4,12 @@
 
 # Multipart objects.
 wacom-objs	:= wacom_wac.o wacom_sys.o
-usbhid-objs	:= hid-core.o
-
-# Optional parts of multipart objects.
-
-ifeq ($(CONFIG_USB_HIDDEV),y)
-	usbhid-objs	+= hiddev.o
-endif
-ifeq ($(CONFIG_HID_PID),y)
-	usbhid-objs	+= hid-pidff.o
-endif
-ifeq ($(CONFIG_LOGITECH_FF),y)
-	usbhid-objs	+= hid-lgff.o
-endif
-ifeq ($(CONFIG_PANTHERLORD_FF),y)
-	usbhid-objs	+= hid-plff.o
-endif
-ifeq ($(CONFIG_THRUSTMASTER_FF),y)
-	usbhid-objs	+= hid-tmff.o
-endif
-ifeq ($(CONFIG_ZEROPLUS_FF),y)
-	usbhid-objs	+= hid-zpff.o
-endif
-ifeq ($(CONFIG_HID_FF),y)
-	usbhid-objs	+= hid-ff.o
-endif
 
 obj-$(CONFIG_USB_AIPTEK)	+= aiptek.o
 obj-$(CONFIG_USB_ATI_REMOTE)	+= ati_remote.o
 obj-$(CONFIG_USB_ATI_REMOTE2)	+= ati_remote2.o
-obj-$(CONFIG_USB_HID)		+= usbhid.o
-obj-$(CONFIG_USB_KBD)		+= usbkbd.o
 obj-$(CONFIG_USB_KBTAB)		+= kbtab.o
 obj-$(CONFIG_USB_KEYSPAN_REMOTE)	+= keyspan_remote.o
-obj-$(CONFIG_USB_MOUSE)		+= usbmouse.o
 obj-$(CONFIG_USB_MTOUCH)	+= mtouchusb.o
 obj-$(CONFIG_USB_ITMTOUCH)	+= itmtouch.o
 obj-$(CONFIG_USB_EGALAX)	+= touchkitusb.o