b43: N-PHY: put radio-specific code in separated file

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/b43/Makefile

 b43-y				+= main.o
 b43-y				+= tables.o
 b43-$(CONFIG_B43_NPHY)		+= tables_nphy.o
+b43-$(CONFIG_B43_NPHY)		+= radio_2055.o
 b43-y				+= phy_common.o
 b43-y				+= phy_g.o
 b43-y				+= phy_a.o

drivers/net/wireless/b43/phy_n.c

@@ -29,6 +29,7 @@
 #include "b43.h"
 #include "phy_n.h"
 #include "tables_nphy.h"
+#include "radio_2055.h"
 #include "main.h"
 
 struct nphy_txgains {

drivers/net/wireless/b43/tables_nphy.h

@@ -3,7 +3,6 @@
 
 #include <linux/types.h>
 
-
 struct b43_phy_n_sfo_cfg {
 	u16 phy_bw1a;
 	u16 phy_bw2;
@@ -13,40 +12,6 @@ struct b43_phy_n_sfo_cfg {
 	u16 phy_bw6;
 };
 
-struct b43_nphy_channeltab_entry_rev2 {
-	/* The channel number */
-	u8 channel;
-	/* The channel frequency in MHz */
-	u16 freq;
-	/* An unknown value */
-	u16 unk2;
-	/* Radio register values on channelswitch */
-	u8 radio_pll_ref;
-	u8 radio_rf_pllmod0;
-	u8 radio_rf_pllmod1;
-	u8 radio_vco_captail;
-	u8 radio_vco_cal1;
-	u8 radio_vco_cal2;
-	u8 radio_pll_lfc1;
-	u8 radio_pll_lfr1;
-	u8 radio_pll_lfc2;
-	u8 radio_lgbuf_cenbuf;
-	u8 radio_lgen_tune1;
-	u8 radio_lgen_tune2;
-	u8 radio_c1_lgbuf_atune;
-	u8 radio_c1_lgbuf_gtune;
-	u8 radio_c1_rx_rfr1;
-	u8 radio_c1_tx_pgapadtn;
-	u8 radio_c1_tx_mxbgtrim;
-	u8 radio_c2_lgbuf_atune;
-	u8 radio_c2_lgbuf_gtune;
-	u8 radio_c2_rx_rfr1;
-	u8 radio_c2_tx_pgapadtn;
-	u8 radio_c2_tx_mxbgtrim;
-	/* PHY register values on channelswitch */
-	struct b43_phy_n_sfo_cfg phy_regs;
-};
-
 struct b43_nphy_channeltab_entry_rev3 {
 	/* The channel number */
 	u8 channel;
@@ -58,7 +23,6 @@ struct b43_nphy_channeltab_entry_rev3 {
 	struct b43_phy_n_sfo_cfg phy_regs;
 };
 
-
 struct b43_wldev;
 
 struct nphy_txiqcal_ladder {
@@ -82,14 +46,6 @@ struct nphy_rf_control_override_rev3 {
 	u8 val_addr1;
 };
 
-/* Upload the default register value table.
- * If "ghz5" is true, we upload the 5Ghz table. Otherwise the 2.4Ghz
- * table is uploaded. If "ignore_uploadflag" is true, we upload any value
- * and ignore the "UPLOAD" flag. */
-void b2055_upload_inittab(struct b43_wldev *dev,
-			  bool ghz5, bool ignore_uploadflag);
-
-
 /* Get the NPHY Channel Switch Table entry for a channel.
  * Returns NULL on failure to find an entry. */
 const struct b43_nphy_channeltab_entry_rev2 *