Commit 6dcc19df authored by Jean Delvare's avatar Jean Delvare Committed by Greg Kroah-Hartman

[PATCH] i2c-i801: Better pci subsystem integration

i2c-i801: Better pci subsystem integration

Integrate the i2c-i801 driver better with the pci subsystem, by
calling pci_{enable,disable}_device and requesting the I/O region
by BAR rather than direct configuration space access.
Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 455f3323
......@@ -66,7 +66,7 @@
#define SMBAUXCTL (13 + i801_smba) /* ICH4 only */
/* PCI Address Constants */
#define SMBBA 0x020
#define SMBBAR 4
#define SMBHSTCFG 0x040
#define SMBREV 0x008
......@@ -97,7 +97,7 @@ static int i801_transaction(void);
static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
int command, int hwpec);
static unsigned short i801_smba;
static unsigned long i801_smba;
static struct pci_driver i801_driver;
static struct pci_dev *I801_dev;
static int isich4;
......@@ -105,6 +105,7 @@ static int isich4;
static int __devinit i801_setup(struct pci_dev *dev)
{
unsigned char temp;
int err;
I801_dev = dev;
if ((dev->device == PCI_DEVICE_ID_INTEL_82801DB_3) ||
......@@ -114,19 +115,28 @@ static int __devinit i801_setup(struct pci_dev *dev)
else
isich4 = 0;
err = pci_enable_device(dev);
if (err) {
dev_err(&dev->dev, "Failed to enable SMBus device (%d)\n",
err);
goto exit;
}
/* Determine the address of the SMBus area */
pci_read_config_word(I801_dev, SMBBA, &i801_smba);
i801_smba &= 0xfff0;
i801_smba = pci_resource_start(dev, SMBBAR);
if (!i801_smba) {
dev_err(&dev->dev, "SMBus base address uninitialized, "
"upgrade BIOS\n");
return -ENODEV;
err = -ENODEV;
goto exit_disable;
}
if (!request_region(i801_smba, (isich4 ? 16 : 8), i801_driver.name)) {
dev_err(&dev->dev, "I801_smb region 0x%x already in use!\n",
i801_smba);
return -EBUSY;
err = pci_request_region(dev, SMBBAR, i801_driver.name);
if (err) {
dev_err(&dev->dev, "Failed to request SMBus region "
"0x%lx-0x%lx\n", i801_smba,
pci_resource_end(dev, SMBBAR));
goto exit_disable;
}
pci_read_config_byte(I801_dev, SMBHSTCFG, &temp);
......@@ -147,6 +157,11 @@ static int __devinit i801_setup(struct pci_dev *dev)
dev_dbg(&dev->dev, "I801_smba = 0x%X\n", i801_smba);
return 0;
exit_disable:
pci_disable_device(dev);
exit:
return err;
}
static int i801_transaction(void)
......@@ -521,14 +536,15 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id
i801_adapter.dev.parent = &dev->dev;
snprintf(i801_adapter.name, I2C_NAME_SIZE,
"SMBus I801 adapter at %04x", i801_smba);
"SMBus I801 adapter at %04lx", i801_smba);
return i2c_add_adapter(&i801_adapter);
}
static void __devexit i801_remove(struct pci_dev *dev)
{
i2c_del_adapter(&i801_adapter);
release_region(i801_smba, (isich4 ? 16 : 8));
pci_release_region(dev, SMBBAR);
pci_disable_device(dev);
}
static struct pci_driver i801_driver = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment