Commit 6ddcfef7 authored by Saurav Kashyap's avatar Saurav Kashyap Committed by James Bottomley

[SCSI] qla2xxx: Correction to message ids.

Signed-off-by: default avatarGiridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: default avatarSaurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: default avatarJames Bottomley <JBottomley@Parallels.com>
parent 0e31a2c8
......@@ -11,10 +11,11 @@
* ----------------------------------------------------------------------
* | Level | Last Value Used | Holes |
* ----------------------------------------------------------------------
* | Module Init and Probe | 0x0152 | 0x4b,0xba,0xfa |
* | Module Init and Probe | 0x0159 | 0x4b,0xba,0xfa |
* | Mailbox commands | 0x1181 | 0x111a-0x111b |
* | | | 0x1155-0x1158 |
* | | | 0x1018-0x1019 |
* | | | 0x1115-0x1116 |
* | | | 0x10ca |
* | Device Discovery | 0x2095 | 0x2020-0x2022, |
* | | | 0x2011-0x2012, |
......@@ -28,7 +29,7 @@
* | DPC Thread | 0x4022 | 0x4002,0x4013 |
* | Async Events | 0x5087 | 0x502b-0x502f |
* | | | 0x5047,0x5052 |
* | | | 0x5040,0x5075 |
* | | | 0x5084,0x5075 |
* | | | 0x503d,0x5044 |
* | Timer Routines | 0x6012 | |
* | User Space Interactions | 0x70e1 | 0x7018,0x702e, |
......@@ -41,6 +42,7 @@
* | | | 0x70ad-0x70ae, |
* | | | 0x70d1-0x70db, |
* | | | 0x7047,0x703b |
* | | | 0x70de-0x70df, |
* | Task Management | 0x803d | 0x8025-0x8026 |
* | | | 0x800b,0x8039 |
* | AER/EEH | 0x9011 | |
......@@ -54,10 +56,12 @@
* | | | 0xb12c,0xb12d |
* | | | 0xb13a,0xb142 |
* | | | 0xb13c-0xb140 |
* | | | 0xb149 |
* | MultiQ | 0xc00c | |
* | Misc | 0xd010 | |
* | Target Mode | 0xe070 | |
* | Target Mode Management | 0xf072 | |
* | Target Mode | 0xe070 | 0xe021 |
* | Target Mode Management | 0xf072 | 0xf002-0xf003 |
* | | | 0xf046-0xf049 |
* | Target Mode Task Management | 0x1000b | |
* ----------------------------------------------------------------------
*/
......
......@@ -1596,7 +1596,7 @@ qlafx00_timer_routine(scsi_qla_host_t *vha)
*/
if (ha->mr.fw_critemp_timer_tick == 0) {
tempc = QLAFX00_GET_TEMPERATURE(ha);
ql_log(ql_dbg_timer, vha, 0x6012,
ql_dbg(ql_dbg_timer, vha, 0x6012,
"ISPFx00(%s): Critical temp timer, "
"current SOC temperature: %d\n",
__func__, tempc);
......
......@@ -3153,7 +3153,7 @@ qla8044_poll_flash_status_reg(struct scsi_qla_host *vha)
ret_val = qla8044_rd_reg_indirect(vha, QLA8044_FLASH_STATUS,
&flash_status);
if (ret_val) {
ql_log(ql_log_warn, vha, 0xb120,
ql_log(ql_log_warn, vha, 0xb13c,
"%s: Failed to read FLASH_STATUS reg.\n",
__func__);
break;
......@@ -3484,7 +3484,7 @@ qla8044_write_optrom_data(struct scsi_qla_host *vha, uint8_t *buf,
}
erase_offset += QLA8044_SECTOR_SIZE;
}
ql_dbg(ql_dbg_user, vha, 0xb139,
ql_dbg(ql_dbg_user, vha, 0xb13f,
"Got write for addr = 0x%x length=0x%x.\n",
offset, length);
......@@ -3653,7 +3653,7 @@ qla8044_clear_rst_ready(scsi_qla_host_t *vha)
*/
drv_state &= ~(1 << vha->hw->portnum);
ql_dbg(ql_dbg_p3p, vha, 0xb143,
ql_dbg(ql_dbg_p3p, vha, 0xb13d,
"drv_state: 0x%08x\n", drv_state);
qla8044_wr_direct(vha, QLA8044_CRB_DRV_STATE_INDEX, drv_state);
}
......@@ -3681,13 +3681,13 @@ qla8044_abort_isp(scsi_qla_host_t *vha)
/* If IDC_CTRL DONTRESETHBA_BIT0 is set don't do reset
* recovery */
if (qla8044_idc_dontreset(ha) == DONTRESET_BIT0) {
ql_dbg(ql_dbg_p3p, vha, 0xb144,
ql_dbg(ql_dbg_p3p, vha, 0xb13e,
"Reset recovery disabled\n");
rval = QLA_FUNCTION_FAILED;
goto exit_isp_reset;
}
ql_dbg(ql_dbg_p3p, vha, 0xb145,
ql_dbg(ql_dbg_p3p, vha, 0xb140,
"HW State: NEED RESET\n");
qla8044_wr_direct(vha, QLA8044_CRB_DEV_STATE_INDEX,
QLA8XXX_DEV_NEED_RESET);
......
......@@ -2944,7 +2944,7 @@ qla82xx_get_flash_version(scsi_qla_host_t *vha, void *mbuf)
ha->fw_revision[0] = bcode[0x4];
ha->fw_revision[1] = bcode[0x5];
ha->fw_revision[2] = bcode[0x6];
ql_dbg(ql_dbg_init, vha, 0x015a,
ql_dbg(ql_dbg_init, vha, 0x0153,
"Firmware revision %d.%d.%d\n",
ha->fw_revision[0], ha->fw_revision[1],
ha->fw_revision[2]);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment