Commit 6df77862 authored by Baoquan He's avatar Baoquan He Committed by David S. Miller

bnx2: Wait for in-flight DMA to complete at probe stage

In-flight DMA from 1st kernel could continue going in kdump kernel.
New io-page table has been created before bnx2 does reset at open stage.
We have to wait for the in-flight DMA to complete to avoid it look up
into the newly created io-page table at probe stage.
Suggested-by: default avatarMichael Chan <michael.chan@broadcom.com>
Signed-off-by: default avatarBaoquan He <bhe@redhat.com>
Acked-by: default avatarMichael Chan <michael.chan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 5d0d4b91
...@@ -49,6 +49,7 @@ ...@@ -49,6 +49,7 @@
#include <linux/firmware.h> #include <linux/firmware.h>
#include <linux/log2.h> #include <linux/log2.h>
#include <linux/aer.h> #include <linux/aer.h>
#include <linux/crash_dump.h>
#if IS_ENABLED(CONFIG_CNIC) #if IS_ENABLED(CONFIG_CNIC)
#define BCM_CNIC 1 #define BCM_CNIC 1
...@@ -4764,15 +4765,16 @@ bnx2_setup_msix_tbl(struct bnx2 *bp) ...@@ -4764,15 +4765,16 @@ bnx2_setup_msix_tbl(struct bnx2 *bp)
BNX2_WR(bp, BNX2_PCI_GRC_WINDOW3_ADDR, BNX2_MSIX_PBA_ADDR); BNX2_WR(bp, BNX2_PCI_GRC_WINDOW3_ADDR, BNX2_MSIX_PBA_ADDR);
} }
static int static void
bnx2_reset_chip(struct bnx2 *bp, u32 reset_code) bnx2_wait_dma_complete(struct bnx2 *bp)
{ {
u32 val; u32 val;
int i, rc = 0; int i;
u8 old_port;
/* Wait for the current PCI transaction to complete before /*
* issuing a reset. */ * Wait for the current PCI transaction to complete before
* issuing a reset.
*/
if ((BNX2_CHIP(bp) == BNX2_CHIP_5706) || if ((BNX2_CHIP(bp) == BNX2_CHIP_5706) ||
(BNX2_CHIP(bp) == BNX2_CHIP_5708)) { (BNX2_CHIP(bp) == BNX2_CHIP_5708)) {
BNX2_WR(bp, BNX2_MISC_ENABLE_CLR_BITS, BNX2_WR(bp, BNX2_MISC_ENABLE_CLR_BITS,
...@@ -4796,6 +4798,21 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code) ...@@ -4796,6 +4798,21 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
} }
} }
return;
}
static int
bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
{
u32 val;
int i, rc = 0;
u8 old_port;
/* Wait for the current PCI transaction to complete before
* issuing a reset. */
bnx2_wait_dma_complete(bp);
/* Wait for the firmware to tell us it is ok to issue a reset. */ /* Wait for the firmware to tell us it is ok to issue a reset. */
bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT0 | reset_code, 1, 1); bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT0 | reset_code, 1, 1);
...@@ -8580,6 +8597,15 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) ...@@ -8580,6 +8597,15 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
pci_set_drvdata(pdev, dev); pci_set_drvdata(pdev, dev);
/*
* In-flight DMA from 1st kernel could continue going in kdump kernel.
* New io-page table has been created before bnx2 does reset at open stage.
* We have to wait for the in-flight DMA to complete to avoid it look up
* into the newly created io-page table.
*/
if (is_kdump_kernel())
bnx2_wait_dma_complete(bp);
memcpy(dev->dev_addr, bp->mac_addr, ETH_ALEN); memcpy(dev->dev_addr, bp->mac_addr, ETH_ALEN);
dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG | dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG |
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment