Merge home:v2.5/linux

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux

Documentation/DocBook/Makefile

@@ -104,8 +104,8 @@ APISOURCES :=	$(TOPDIR)/drivers/media/video/videodev.c \
 		$(TOPDIR)/sound/sound_firmware.c \
 		$(TOPDIR)/drivers/net/wan/syncppp.c \
 		$(TOPDIR)/drivers/net/wan/z85230.c \
-		$(TOPDIR)/drivers/usb/hcd.c \
-		$(TOPDIR)/drivers/usb/usb.c \
+		$(TOPDIR)/drivers/usb/core/hcd.c \
+		$(TOPDIR)/drivers/usb/core/usb.c \
 		$(TOPDIR)/drivers/video/fbmem.c \
 		$(TOPDIR)/drivers/video/fbcmap.c \
 		$(TOPDIR)/drivers/video/fbcon.c \

Documentation/DocBook/kernel-api.tmpl

@@ -282,7 +282,7 @@
     </sect1>
 
     <sect1><title>USB Core APIs</title>
-!Edrivers/usb/usb.c
+!Edrivers/usb/core/usb.c
     </sect1>
 
     <sect1><title>Host Controller APIs</title>
@@ -290,7 +290,7 @@
     most of which implement standard register interfaces such as
     EHCI, OHCI, or UHCI.
     </para>
-!Edrivers/usb/hcd.c
+!Edrivers/usb/core/hcd.c
     </sect1>
 
   </chapter>

drivers/usb/class/Config.help

+CONFIG_USB_ACM
+  This driver supports USB modems and ISDN adapters which support the
+  Communication Device Class Abstract Control Model interface.
+  Please read <file:Documentation/usb/acm.txt> for details.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called acm.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_AUDIO
+  Say Y here if you want to connect USB audio equipment such as
+  speakers to your computer's USB port.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called audio.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_BLUETOOTH_TTY
+  Say Y here if you want to connect a USB Bluetooth device to your
+  computer's USB port. You will need the Bluetooth stack (available
+  at <http://developer.axis.com/software/index.shtml>) to fully use
+  the device.
+
+  This driver implements a tty inteface to a Bluetooth device.  If
+  you want to use a socket based Bluetooth stack (like the BlueZ
+  stack), do not use this driver.
+
+  If in doubt, say N here.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called bluetty.o. If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_PRINTER
+  Say Y here if you want to connect a USB printer to your computer's
+  USB port.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called printer.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.

drivers/usb/class/Config.in

@@ -3,14 +3,14 @@
 #
 comment 'USB Device Class drivers'
 dep_tristate '  USB Audio support' CONFIG_USB_AUDIO $CONFIG_USB $CONFIG_SOUND
-dep_tristate '  USB Bluetooth support (EXPERIMENTAL)' CONFIG_USB_BLUETOOTH $CONFIG_USB $CONFIG_EXPERIMENTAL
+dep_tristate '  USB Bluetooth TTY support' CONFIG_USB_BLUETOOTH_TTY $CONFIG_USB
 dep_tristate '  USB Modem (CDC ACM) support' CONFIG_USB_ACM $CONFIG_USB
 dep_tristate '  USB Printer support' CONFIG_USB_PRINTER $CONFIG_USB
 
 
 # Turn on CONFIG_USB_CLASS if any of the drivers are compiled into the kernel
 # to make our Makefile logic a bit simpler.
-if [ "$CONFIG_USB_AUDIO" = "y" -o "$CONFIG_USB_BLUETOOTH" = "y" ]; then
+if [ "$CONFIG_USB_AUDIO" = "y" -o "$CONFIG_USB_BLUETOOTH_TTY" = "y" ]; then
    define_bool CONFIG_USB_CLASS y
 fi
 if [ "$CONFIG_USB_ACM" = "y" -o "$CONFIG_USB_PRINTER" = "y" ]; then

drivers/usb/class/Makefile

@@ -7,7 +7,7 @@ O_TARGET	:= usb-class.o
 
 obj-$(CONFIG_USB_ACM)		+= cdc-acm.o
 obj-$(CONFIG_USB_AUDIO)		+= audio.o
-obj-$(CONFIG_USB_BLUETOOTH)	+= bluetooth.o
+obj-$(CONFIG_USB_BLUETOOTH_TTY)	+= bluetty.o
 obj-$(CONFIG_USB_PRINTER)	+= printer.o
 
 

drivers/usb/class/bluetooth.c → drivers/usb/class/bluetty.c

 /*
- * bluetooth.c   Version 0.13
+ * bluetty.c   Version 0.13
  *
  * Copyright (c) 2000, 2001 Greg Kroah-Hartman	<greg@kroah.com>
  * Copyright (c) 2000 Mark Douglas Corner	<mcorner@umich.edu>
  *
- * USB Bluetooth driver, based on the Bluetooth Spec version 1.0B
+ * USB Bluetooth TTY driver, based on the Bluetooth Spec version 1.0B
  * 
  * (2001/11/30) Version 0.13 gkh
  *	- added locking patch from Masoodur Rahman <rmasoodu@in.ibm.com>
@@ -237,7 +237,7 @@ static struct usb_device_id usb_bluetooth_ids [] = {
 MODULE_DEVICE_TABLE (usb, usb_bluetooth_ids);
 
 static struct usb_driver usb_bluetooth_driver = {
-	name:		"bluetooth",
+	name:		"bluetty",
 	probe:		usb_bluetooth_probe,
 	disconnect:	usb_bluetooth_disconnect,
 	id_table:	usb_bluetooth_ids,

drivers/usb/core/devio.c

@@ -597,33 +597,31 @@ static int proc_bulk(struct dev_state *ps, void *arg)
 	if (!usb_maxpacket(dev, pipe, !(bulk.ep & USB_DIR_IN)))
 		return -EINVAL;
 	len1 = bulk.len;
-	if (len1 > PAGE_SIZE)
-		return -EINVAL;
-	if (!(tbuf = (unsigned char *)__get_free_page(GFP_KERNEL)))
+	if (!(tbuf = kmalloc(len1, GFP_KERNEL)))
 		return -ENOMEM;
 	tmo = (bulk.timeout * HZ + 999) / 1000;
 	if (bulk.ep & 0x80) {
 		if (len1 && !access_ok(VERIFY_WRITE, bulk.data, len1)) {
-			free_page((unsigned long)tbuf);
+			kfree(tbuf);
 			return -EINVAL;
 		}
 		i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo);
 		if (!i && len2) {
 			if (copy_to_user(bulk.data, tbuf, len2)) {
-				free_page((unsigned long)tbuf);
+				kfree(tbuf);
 				return -EFAULT;
 			}
 		}
 	} else {
 		if (len1) {
 			if (copy_from_user(tbuf, bulk.data, len1)) {
-				free_page((unsigned long)tbuf);
+				kfree(tbuf);
 				return -EFAULT;
 			}
 		}
 		i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo);
 	}
-	free_page((unsigned long)tbuf);
+	kfree(tbuf);
 	if (i < 0) {
 		printk(KERN_WARNING "usbfs: USBDEVFS_BULK failed dev %d ep 0x%x len %u ret %d\n", 
 		       dev->devnum, bulk.ep, bulk.len, i);
@@ -1059,6 +1057,8 @@ static int proc_ioctl (struct dev_state *ps, void *arg)
 	int			size;
 	void			*buf = 0;
 	int			retval = 0;
+       struct usb_interface    *ifp = 0;
+       struct usb_driver       *driver = 0;
 
 	/* get input parameters and alloc buffer */
 	if (copy_from_user(&ctrl, (void *) arg, sizeof (ctrl)))
@@ -1076,33 +1076,41 @@ static int proc_ioctl (struct dev_state *ps, void *arg)
 		}
 	}
 
-	/* ioctl to device */
-	if (ctrl.ifno < 0) {
-		switch (ctrl.ioctl_code) {
-		/* access/release token for issuing control messages
-		 * ask a particular driver to bind/unbind, ... etc
-		 */
-		}
-		retval = -ENOSYS;
-
-	/* ioctl to the driver which has claimed a given interface */
-	} else {
-		struct usb_interface	*ifp = 0;
-		if (!ps->dev)
-			retval = -ENODEV;
-		else if (ctrl.ifno >= ps->dev->actconfig->bNumInterfaces)
+       if (!ps->dev)
+               retval = -ENODEV;
+       else if (!(ifp = usb_ifnum_to_if (ps->dev, ctrl.ifno)))
+               retval = -EINVAL;
+       else switch (ctrl.ioctl_code) {
+
+       /* disconnect kernel driver from interface, leaving it unbound.  */
+       case USBDEVFS_DISCONNECT:
+               driver = ifp->driver;
+               if (driver) {
+                       down (&driver->serialize);
+                       dbg ("disconnect '%s' from dev %d interface %d",
+                               driver->name, ps->dev->devnum, ctrl.ifno);
+                       driver->disconnect (ps->dev, ifp->private_data);
+                       usb_driver_release_interface (driver, ifp);
+                       up (&driver->serialize);
+               } else
 			retval = -EINVAL;
+               break;
+
+       /* let kernel drivers try to (re)bind to the interface */
+       case USBDEVFS_CONNECT:
+               usb_find_interface_driver_for_ifnum (ps->dev, ctrl.ifno);
+               break;
+
+       /* talk directly to the interface's driver */
+       default:
+               driver = ifp->driver;
+               if (driver == 0 || driver->ioctl == 0)
+                       retval = -ENOSYS;
 		else {
-			if (!(ifp = usb_ifnum_to_if (ps->dev, ctrl.ifno)))
-				retval = -EINVAL;
-			else if (ifp->driver == 0 || ifp->driver->ioctl == 0)
-				retval = -ENOSYS;
-		}
-		if (retval == 0) {
 			if (ifp->driver->owner)
 				__MOD_INC_USE_COUNT(ifp->driver->owner);
 			/* ifno might usefully be passed ... */
-			retval = ifp->driver->ioctl (ps->dev, ctrl.ioctl_code, buf);
+                       retval = driver->ioctl (ps->dev, ctrl.ioctl_code, buf);
 			/* size = min_t(int, size, retval)? */
 			if (ifp->driver->owner)
 				__MOD_DEC_USE_COUNT(ifp->driver->owner);

drivers/usb/core/hcd.h

@@ -181,6 +181,24 @@ extern int usb_hcd_pci_resume (struct pci_dev *dev);
 
 #endif /* CONFIG_PCI */
 
+/* -------------------------------------------------------------------------- */
+
+/* Enumeration is only for the hub driver, or HCD virtual root hubs */
+extern struct usb_device *usb_alloc_dev(struct usb_device *parent,
+	struct usb_bus *);
+extern void usb_free_dev(struct usb_device *);
+extern int usb_new_device(struct usb_device *dev);
+extern void usb_connect(struct usb_device *dev);
+extern void usb_disconnect(struct usb_device **);
+
+#ifndef _LINUX_HUB_H
+/* exported to hub driver ONLY to support usb_reset_device () */
+extern int usb_get_configuration(struct usb_device *dev);
+extern void usb_set_maxpacket(struct usb_device *dev);
+extern void usb_destroy_configuration(struct usb_device *dev);
+extern int usb_set_address(struct usb_device *dev);
+#endif /* _LINUX_HUB_H */
+
 /*-------------------------------------------------------------------------*/
 
 /*

drivers/usb/core/hub.c

@@ -29,6 +29,7 @@
 #include <asm/uaccess.h>
 #include <asm/byteorder.h>
 
+#include "hcd.h"
 #include "hub.h"
 
 /* Wakes up khubd */

drivers/usb/core/usb.c

@@ -196,6 +196,28 @@ void usb_deregister(struct usb_driver *driver)
 	usbfs_update_special();
 }
 
+/**
+ * usb_ifnum_to_ifpos - convert the interface number to the interface position
+ * @dev: the device to use
+ * @ifnum: the interface number (bInterfaceNumber); not interface position
+ *
+ * This is used to convert the interface _number_ (as in
+ * interface.bInterfaceNumber) to the interface _position_ (as in
+ * dev->actconfig->interface + position).  Note that the number is the same as
+ * the position for all interfaces _except_ devices with interfaces not
+ * sequentially numbered (e.g., 0, 2, 3, etc).
+ */
+int usb_ifnum_to_ifpos(struct usb_device *dev, unsigned ifnum)
+{
+	int i;
+
+	for (i = 0; i < dev->actconfig->bNumInterfaces; i++)
+		if (dev->actconfig->interface[i].altsetting[0].bInterfaceNumber == ifnum)
+			return i;
+
+	return -EINVAL;
+}
+
 /**
  * usb_ifnum_to_if - get the interface object with a given interface number
  * @dev: the device whose current configuration is considered
@@ -570,6 +592,24 @@ static int usb_find_interface_driver(struct usb_device *dev, unsigned ifnum)
 	return -1;
 }
 
+/**
+ * usb_find_interface_driver_for_ifnum - finds a usb interface driver for the specified ifnum
+ * @dev: the device to use
+ * @ifnum: the interface number (bInterfaceNumber); not interface position!
+ *
+ * This converts a ifnum to ifpos via a call to usb_ifnum_to_ifpos and then
+ * calls usb_find_interface_driver() with the found ifpos.  Note
+ * usb_find_interface_driver's ifnum parameter is actually interface position.
+ */
+int usb_find_interface_driver_for_ifnum(struct usb_device *dev, unsigned ifnum)
+{
+	int ifpos = usb_ifnum_to_ifpos(dev, ifnum);
+
+	if (0 > ifpos)
+		return -EINVAL;
+
+	return usb_find_interface_driver(dev, ifpos);
+}
 
 #ifdef	CONFIG_HOTPLUG
 
@@ -789,50 +829,32 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus)
 	return dev;
 }
 
-// usbcore-internal ...
-// but usb_dec_dev_use() is #defined to this, and that's public!!
-// FIXME the public call should BUG() whenever count goes to zero,
-// the usbcore-internal one should do so _unless_ it does so...
+/**
+ * usb_free_dev - free a usb device structure (usbcore-internal)
+ * @dev: device that's been disconnected
+ * Context: !in_interrupt ()
+ *
+ * Used by hub and virtual root hub drivers.  The device is completely
+ * gone, everything is cleaned up, so it's time to get rid of these last
+ * records of this device.
+ */
 void usb_free_dev(struct usb_device *dev)
 {
-	if (atomic_dec_and_test(&dev->refcnt)) {
-		/* Normally only goes to zero in usb_disconnect(), from
-		 * khubd or from roothub shutdown (rmmod/apmd/... thread).
-		 * Abnormally, roothub init errors can happen, so HCDs
-		 * call this directly.
-		 *
-		 * Otherwise this is a nasty device driver bug, often in
-		 * disconnect processing.
+	if (in_interrupt ())
+		BUG ();
+	if (!atomic_dec_and_test (&dev->refcnt)) {
+		/* MUST go to zero here, else someone's hanging on to
+		 * a device that's supposed to have been cleaned up!!
 		 */
-		if (in_interrupt ())
-			BUG ();
-
-		dev->bus->op->deallocate(dev);
-		usb_destroy_configuration(dev);
-
-		usb_bus_put(dev->bus);
-
-		kfree(dev);
+		BUG ();
 	}
-}
 
-/**
- * usb_inc_dev_use - record another reference to a device
- * @dev: the device being referenced
- *
- * Each live reference to a device should be refcounted.
- *
- * Device drivers should normally record such references in their
- * open() methods.
- * Drivers should then release them, using usb_dec_dev_use(), in their
- * close() methods.
- */
-void usb_inc_dev_use(struct usb_device *dev)
-{
-	atomic_inc(&dev->refcnt);
+	dev->bus->op->deallocate (dev);
+	usb_destroy_configuration (dev);
+	usb_bus_put (dev->bus);
+	kfree (dev);
 }
 
-
 /**
  * usb_alloc_urb - creates a new urb for a USB driver to use
  * @iso_packets: number of iso packets for this urb
@@ -2636,6 +2658,7 @@ module_exit(usb_exit);
  * into the kernel, and other device drivers are built as modules,
  * then these symbols need to be exported for the modules to use.
  */
+EXPORT_SYMBOL(usb_ifnum_to_ifpos);
 EXPORT_SYMBOL(usb_ifnum_to_if);
 EXPORT_SYMBOL(usb_epnum_to_ep_desc);
 
@@ -2647,6 +2670,7 @@ EXPORT_SYMBOL(usb_alloc_dev);
 EXPORT_SYMBOL(usb_free_dev);
 EXPORT_SYMBOL(usb_inc_dev_use);
 
+EXPORT_SYMBOL(usb_find_interface_driver_for_ifnum);
 EXPORT_SYMBOL(usb_driver_claim_interface);
 EXPORT_SYMBOL(usb_interface_claimed);
 EXPORT_SYMBOL(usb_driver_release_interface);

drivers/usb/host/uhci.c

@@ -749,7 +749,7 @@ static void uhci_inc_fsbr(struct uhci *uhci, struct urb *urb)
 
 	if ((!(urb->transfer_flags & USB_NO_FSBR)) && !urbp->fsbr) {
 		urbp->fsbr = 1;
-		if (!uhci->fsbr++)
+		if (!uhci->fsbr++ && !uhci->fsbrtimeout)
 			uhci->skel_term_qh->link = uhci->skel_hs_control_qh->dma_handle | UHCI_PTR_QH;
 	}
 
@@ -1631,8 +1631,7 @@ static void uhci_transfer_result(struct uhci *uhci, struct urb *urb)
 
 	if (urb->status != -EINPROGRESS) {
 		info("uhci_transfer_result: called for URB %p not in flight?", urb);
-		spin_unlock_irqrestore(&urb->lock, flags);
-		return;
+		goto out;
 	}
 
 	switch (usb_pipetype(urb->pipe)) {
@@ -1652,10 +1651,8 @@ static void uhci_transfer_result(struct uhci *uhci, struct urb *urb)
 
 	urbp->status = ret;
 
-	if (ret == -EINPROGRESS) {
-		spin_unlock_irqrestore(&urb->lock, flags);
-		return;
-	}
+	if (ret == -EINPROGRESS)
+		goto out;
 
 	switch (usb_pipetype(urb->pipe)) {
 	case PIPE_CONTROL:
@@ -1669,11 +1666,8 @@ static void uhci_transfer_result(struct uhci *uhci, struct urb *urb)
 		break;
 	case PIPE_INTERRUPT:
 		/* Interrupts are an exception */
-		if (urb->interval) {
-			uhci_add_complete(urb);
-			spin_unlock_irqrestore(&urb->lock, flags);
-			return;		/* <-- note return */
-		}
+		if (urb->interval)
+			goto out_complete;
 
 		/* Release bandwidth for Interrupt or Isoc. transfers */
 		/* Spinlock needed ? */
@@ -1689,8 +1683,10 @@ static void uhci_transfer_result(struct uhci *uhci, struct urb *urb)
 	/* Remove it from uhci->urb_list */
 	list_del_init(&urb->urb_list);
 
+out_complete:
 	uhci_add_complete(urb);
 
+out:
 	spin_unlock_irqrestore(&urb->lock, flags);
 }
 
@@ -1820,6 +1816,9 @@ static int uhci_unlink_urb(struct urb *urb)
 		} else {
 			urb->status = -ENOENT;
 
+			spin_unlock(&urb->lock);
+			spin_unlock_irqrestore(&uhci->urb_list_lock, flags);
+
 			if (in_interrupt()) {	/* wait at least 1 frame */
 				static int errorcount = 10;
 
@@ -1829,9 +1828,6 @@ static int uhci_unlink_urb(struct urb *urb)
 			} else
 				schedule_timeout(1+1*HZ/1000); 
 
-			spin_unlock(&urb->lock);
-			spin_unlock_irqrestore(&uhci->urb_list_lock, flags);
-
 			uhci_call_completion(urb);
 		}
 	}
@@ -1846,10 +1842,6 @@ static int uhci_fsbr_timeout(struct uhci *uhci, struct urb *urb)
 
 	uhci_dec_fsbr(uhci, urb);
 
-	/* There is a race with updating IOC in here, but it's not worth */
-	/*  trying to fix since this is merely an optimization. The only */
-	/*  time we'd lose is if the status of the packet got updated */
-	/*  and we'd be turning on FSBR next frame anyway, so it's a wash */
 	urbp->fsbr_timeout = 1;
 
 	head = &urbp->td_list;
@@ -2013,23 +2005,23 @@ static void rh_int_timer_do(unsigned long ptr)
 	tmp = head->next;
 	while (tmp != head) {
 		struct urb *u = list_entry(tmp, struct urb, urb_list);
-		struct urb_priv *urbp = (struct urb_priv *)u->hcpriv;
+		struct urb_priv *up = (struct urb_priv *)u->hcpriv;
 
 		tmp = tmp->next;
 
-		spin_lock(&urb->lock);
+		spin_lock(&u->lock);
 
 		/* Check if the FSBR timed out */
-		if (urbp->fsbr && !urbp->fsbr_timeout && time_after_eq(jiffies, urbp->fsbrtime + IDLE_TIMEOUT))
+		if (up->fsbr && !up->fsbr_timeout && time_after_eq(jiffies, up->fsbrtime + IDLE_TIMEOUT))
 			uhci_fsbr_timeout(uhci, u);
 
 		/* Check if the URB timed out */
-		if (u->timeout && time_after_eq(jiffies, urbp->inserttime + u->timeout)) {
+		if (u->timeout && time_after_eq(jiffies, up->inserttime + u->timeout)) {
 			list_del(&u->urb_list);
 			list_add_tail(&u->urb_list, &list);
 		}
 
-		spin_unlock(&urb->lock);
+		spin_unlock(&u->lock);
 	}
 	spin_unlock_irqrestore(&uhci->urb_list_lock, flags);
 
@@ -2202,12 +2194,12 @@ static int rh_submit_urb(struct urb *urb)
 			OK(0);
 		case RH_PORT_RESET:
 			SET_RH_PORTSTAT(USBPORTSC_PR);
-			wait_ms(50);	/* USB v1.1 7.1.7.3 */
+			mdelay(50);	/* USB v1.1 7.1.7.3 */
 			uhci->rh.c_p_r[wIndex - 1] = 1;
 			CLR_RH_PORTSTAT(USBPORTSC_PR);
 			udelay(10);
 			SET_RH_PORTSTAT(USBPORTSC_PE);
-			wait_ms(10);
+			mdelay(10);
 			SET_RH_PORTSTAT(0xa);
 			OK(0);
 		case RH_PORT_POWER:
@@ -2724,6 +2716,7 @@ static int alloc_uhci(struct pci_dev *dev, unsigned int io_addr, unsigned int io
 	}
 
 	uhci->dev = dev;
+	uhci->irq = dev->irq;
 	uhci->io_addr = io_addr;
 	uhci->io_size = io_size;
 	pci_set_drvdata(dev, uhci);
@@ -2750,6 +2743,11 @@ static int alloc_uhci(struct pci_dev *dev, unsigned int io_addr, unsigned int io
 	/*  or broken setup */
 	reset_hc(uhci);
 
+	uhci->fsbr = 0;
+	uhci->fsbrtimeout = 0;
+
+	uhci->is_suspended = 0;
+
 	spin_lock_init(&uhci->qh_remove_list_lock);
 	INIT_LIST_HEAD(&uhci->qh_remove_list);
 
@@ -2932,8 +2930,6 @@ static int alloc_uhci(struct pci_dev *dev, unsigned int io_addr, unsigned int io
 	if (request_irq(dev->irq, uhci_interrupt, SA_SHIRQ, "usb-uhci", uhci))
 		goto err_request_irq;
 
-	uhci->irq = dev->irq;
-
 	/* disable legacy emulation */
 	pci_write_config_word(uhci->dev, USBLEGSUP, USBLEGSUP_DEFAULT);
 

drivers/usb/host/uhci.h

@@ -287,17 +287,17 @@ struct virt_root_hub {
 struct uhci {
 	struct pci_dev *dev;
 
+#ifdef CONFIG_PROC_FS
 	/* procfs */
 	int num;
 	struct proc_dir_entry *proc_entry;
+#endif
 
 	/* Grabbed from PCI */
 	int irq;
 	unsigned int io_addr;
 	unsigned int io_size;
 
-	struct list_head uhci_list;
-
 	struct pci_pool *qh_pool;
 	struct pci_pool *td_pool;
 

drivers/usb/host/usb-uhci.h

@@ -11,7 +11,7 @@ static __inline__ void uhci_wait_ms(unsigned int ms)
 {
 	if(!in_interrupt())
 	{
-		current->state = TASK_UNINTERRUPTIBLE;
+		set_current_state(TASK_UNINTERRUPTIBLE);
 		schedule_timeout(1 + ms * HZ / 1000);
 	}
 	else

drivers/usb/image/Config.help

+CONFIG_USB_DC2XX
+  Say Y here if you want to connect this type of still camera to your
+  computer's USB port.  See <file:Documentation/usb/dc2xx.txt> for
+  more information; some non-Kodak cameras may also work with this
+  driver, given application support (such as <http://www.gphoto.org/>).
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called dc2xx.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_MDC800
+  Say Y here if you want to connect this type of still camera to
+  your computer's USB port. This driver can be used with gphoto 0.4.3
+  and higher (look at <http://www.gphoto.org/>).
+  To use it create a device node with "mknod /dev/mustek c 180 32" and
+  configure it in your software.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called mdc800.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_HPUSBSCSI
+  Say Y here if you want support for the HP 53xx series of scanners
+  and the Minolta Scan Dual. This driver is experimental.
+  The scanner will be accessible as a SCSI device.
+  This can be compiled as a module, called hpusbscsi.o.
+
+CONFIG_USB_MICROTEK
+  Say Y here if you want support for the Microtek X6USB and
+  possibly the Phantom 336CX, Phantom C6 and ScanMaker V6U(S)L.
+  Support for anything but the X6 is experimental.
+  Please report failures and successes.
+  The scanner will appear as a scsi generic device to the rest
+  of the system. Scsi support is required.
+  This driver can be compiled as a module, called microtek.o.
+
+CONFIG_USB_SCANNER
+  Say Y here if you want to connect a USB scanner to your computer's
+  USB port. Please read <file:Documentation/usb/scanner.txt> and
+  <file:Documentation/usb/scanner-hp-sane.txt> for more information.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called scanner.o. If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.

drivers/usb/input/Config.help

+CONFIG_USB_HID
+  Say Y here if you want full HID support to connect keyboards,
+  mice, joysticks, graphic tablets, or any other HID based devices
+  to your computer via USB. You also need to select HID Input layer
+  support (below) if you want to use keyboards, mice, joysticks and
+  the like.
+
+  You can't use this driver and the HIDBP (Boot Protocol) keyboard
+  and mouse drivers at the same time. More information is available:
+  <file:Documentation/input/input.txt>.
+
+  If unsure, say Y.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called hid.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_HIDINPUT
+  Say Y here if you want to use a USB keyboard, mouse or joystick,
+  or any other HID input device. You also need Input layer support, 
+  (CONFIG_INPUT) which you select under "Input core support".
+
+  If unsure, say Y.
+
+CONFIG_USB_HIDDEV
+  Say Y here if you want to support HID devices (from the USB
+  specification standpoint) that aren't strictly user interface
+  devices, like monitor controls and Uninterruptable Power Supplies.
+
+  This module supports these devices separately using a separate
+  event interface on /dev/usb/hiddevX (char 180:96 to 180:111).
+  This driver requires CONFIG_USB_HID.
+
+  If unsure, say Y.
+
+CONFIG_USB_KBD
+  Say Y here only if you are absolutely sure that you don't want
+  to use the generic HID driver for your USB keyboard and prefer
+  to use the keyboard in its limited Boot Protocol mode instead.
+
+  This is almost certainly not what you want.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called usbkbd.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+  If even remotely unsure, say N.
+
+CONFIG_USB_MOUSE
+  Say Y here only if you are absolutely sure that you don't want
+  to use the generic HID driver for your USB keyboard and prefer
+  to use the keyboard in its limited Boot Protocol mode instead.
+
+  This is almost certainly not what you want.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called usbmouse.o. If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+  If even remotely unsure, say N.
+
+CONFIG_USB_WACOM
+  Say Y here if you want to use the USB version of the Wacom Intuos
+  or Graphire tablet.  Make sure to say Y to "Mouse support"
+  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+  (CONFIG_INPUT_EVDEV) as well.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called wacom.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.

drivers/usb/media/Config.help

+CONFIG_USB_DABUSB
+  A Digital Audio Broadcasting (DAB) Receiver for USB and Linux
+  brought to you by the DAB-Team (<http://dab.in.tum.de/>).  This
+  driver can be taken as an example for URB-based bulk, control, and
+  isochronous transactions. URB's are explained in
+  <file:Documentation/usb/URB.txt>.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called dabusb.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_DSBR
+  Say Y here if you want to connect this type of radio to your
+  computer's USB port. Note that the audio is not digital, and
+  you must connect the line out connector to a sound card or a
+  set of speakers.
+
+  This driver uses the Video For Linux API.  You must enable
+  (Y or M in config) Video For Linux (under Character Devices)
+  to use this driver.  Information on this API and pointers to
+  "v4l" programs may be found on the WWW at
+  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called dsbr100.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_IBMCAM
+  Say Y here if you want to connect a IBM "C-It" camera, also known as
+  "Xirlink PC Camera" to your computer's USB port.  For more
+  information, read <file:Documentation/usb/ibmcam.txt>.
+
+  This driver uses the Video For Linux API.  You must enable
+  (Y or M in config) Video For Linux (under Character Devices)
+  to use this driver.  Information on this API and pointers to
+  "v4l" programs may be found on the WWW at
+  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ibmcam.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>. This
+  camera has several configuration options which can be specified when
+  you load the module.  Read <file:Documentation/usb/ibmcam.txt> to
+  learn more.
+
+CONFIG_USB_KONICAWC
+  Say Y here if you want support for webcams based on a Konica
+  chipset. This is known to work with the Intel YC76 webcam.
+
+  This driver uses the Video For Linux API.  You must enable
+  (Y or M in config) Video For Linux (under Character Devices)
+  to use this driver.  Information on this API and pointers to
+  "v4l" programs may be found on the WWW at
+  <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called konicawc.o. If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_OV511
+  Say Y here if you want to connect this type of camera to your
+  computer's USB port. See <file:Documentation/usb/ov511.txt> for more
+  information and for a list of supported cameras.
+
+  This driver uses the Video For Linux API. You must say Y or M to
+  "Video For Linux" (under Character Devices) to use this driver.
+  Information on this API and pointers to "v4l" programs may be found
+  on the WWW at <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called ov511.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_PWC
+  Say Y or M here if you want to use one of these Philips USB webcams:
+  PCA645, PCA646, PCVC675, PCVC680, PCVC690, PCVC730, PCVC740, or
+  the Askey VC010. The PCA635, PCVC665 and PCVC720 are not supported
+  by this driver and never will be.
+
+  This driver has an optional plugin, which is distributed as a binary
+  module only.  It contains code that allow you to use higher
+  resolutions and framerates but may not be distributed as source.
+  But even without this plugin you can these cams for most
+  applications.
+
+  See <file:Documentation/usb/philips.txt> for more information and
+  installation instructions.
+
+  The built-in microphone is enabled by selecting USB Audio support.
+
+  This driver uses the Video For Linux API. You must say Y or M to
+  "Video For Linux" (under Character Devices) to use this driver.
+  Information on this API and pointers to "v4l" programs may be found
+  on the WWW at <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called pwc.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_SE401
+  Say Y here if you want to connect this type of camera to your
+  computer's USB port. See <file:Documentation/usb/se401.txt> for more
+  information and for a list of supported cameras.
+
+  This driver uses the Video For Linux API. You must say Y or M to
+  "Video For Linux" (under Multimedia Devices) to use this driver.
+  Information on this API and pointers to "v4l" programs may be found
+  on the WWW at <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called se401.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_STV680
+  Say Y here if you want to connect this type of camera to your
+  computer's USB port. This includes the Pencam line of cameras.
+  See <file:Documentation/usb/stv680.txt> for more information and for
+  a list of supported cameras.
+
+  This driver uses the Video For Linux API. You must say Y or M to
+  "Video For Linux" (under Multimedia Devices) to use this driver.
+  Information on this API and pointers to "v4l" programs may be found
+  on the WWW at <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called stv680.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_VICAM
+  Say Y here if you have 3com homeconnect camera (vicam).
+
+  This driver uses the Video For Linux API. You must say Y or M to
+  "Video For Linux" (under Multimedia Devices) to use this driver.
+  Information on this API and pointers to "v4l" programs may be found
+  on the WWW at <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called vicam.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.

drivers/usb/misc/Config.help

+CONFIG_USB_AUERSWALD
+  Say Y here if you want to connect an Auerswald USB ISDN Device
+  to your computer's USB port.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called auerswald.o. If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_EMI26
+  This driver loads firmware to Emagic EMI 2|6 low latency USB
+  Audio interface.
+
+  After firmware load the device is handled with standard linux
+  USB Audio driver.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called audio.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_RIO500
+  Say Y here if you want to connect a USB Rio500 mp3 player to your
+  computer's USB port. Please read <file:Documentation/usb/rio.txt>
+  for more information.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called rio500.o. If you want to compile it as
+  a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_TIGL
+  If you own a Texas Instruments graphing calculator and use a 
+  TI-GRAPH LINK USB cable (aka SilverLink), then you might be 
+  interested in this driver.
+
+  If you enable this driver, you will be able to communicate with
+  your calculator through a set of device nodes under /dev.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called tiglusb.o. If you want to compile it as a
+  module, say M here and read Documentation/modules.txt.
+
+  If you don't know what the SilverLink cable is or what a Texas
+  Instruments graphing calculator is, then you probably don't need this
+  driver.
+
+  If unsure, say N.
+
+CONFIG_USB_USS720
+  This driver is for USB parallel port adapters that use the Lucent
+  Technologies USS-720 chip. These cables are plugged into your USB
+  port and provide USB compatibility to peripherals designed with
+  parallel port interfaces.
+
+  The chip has two modes: automatic mode and manual mode. In automatic
+  mode, it looks to the computer like a standard USB printer. Only
+  printers may be connected to the USS-720 in this mode. The generic
+  USB printer driver ("USB Printer support", above) may be used in
+  that mode, and you can say N here if you want to use the chip only
+  in this mode.
+
+  Manual mode is not limited to printers, any parallel port
+  device should work. This driver utilizes manual mode.
+  Note however that some operations are three orders of magnitude
+  slower than on a PCI/ISA Parallel Port, so timing critical
+  applications might not work.
+
+  Say Y here if you own an USS-720 USB->Parport cable and intend to
+  connect anything other than a printer to it.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called uss720.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.

drivers/usb/net/Config.help

+CONFIG_USB_CATC
+  Say Y if you want to use one of the following 10Mbps USB Ethernet
+  device based on the EL1210A chip. Supported devices are:
+    Belkin F5U011
+    Belkin F5U111
+    CATC NetMate
+    CATC NetMate II
+    smartBridges smartNIC
+
+  This driver makes the adapter appear as a normal Ethernet interface,
+  typically on eth0, if it is the only ethernet device, or perhaps on
+  eth1, if you have a PCI or ISA ethernet card installed.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called catc.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_CDCETHER
+  This driver supports devices conforming to the Communication Device
+  Class Ethernet Control Model.  This is used in some cable modems.
+  For more details on the specification, get the Communication Device
+  Class specification from <http://www.usb.org/>.
+
+  This driver should work with the following devices:
+        * Ericsson PipeRider (all variants)
+        * Motorola (DM100 and SB4100)
+        * Broadcom Cable Modem (reference design)
+        * Toshiba PCX1100U and possibly other cable modems
+
+  The device creates a network device (ethX, where X depends on what
+  other networking devices you have in use), as for a normal PCI
+  or ISA based ethernet network card.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called cdc-ether.o.  If you want to compile it 
+  as a module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_KAWETH
+  Say Y here if you want to use one of the following 10Mbps only
+  USB Ethernet adapters based on the KLSI KL5KUSB101B chipset:
+       3Com 3C19250
+       ADS USB-10BT
+       ATEN USB Ethernet
+       ASANTE USB To Ethernet Adapter
+       AOX Endpoints USB Ethernet
+       Correga K.K.
+       D-Link DSB-650C and DU-E10
+       Entrega / Portgear E45
+       I-O DATA USB-ET/T
+       Jaton USB Ethernet Device Adapter
+       Kingston Technology USB Ethernet Adapter
+       Linksys USB10T
+       Mobility USB-Ethernet Adapter
+       NetGear EA-101
+       Peracom Enet and Enet2
+       Portsmith Express Ethernet Adapter
+       Shark Pocket Adapter
+       SMC 2202USB
+       Sony Vaio port extender
+
+  This driver is likely to work with most 10Mbps only USB Ethernet
+  adapters, including some "no brand" devices. It does NOT work on
+  SmartBridges smartNIC or on Belkin F5U111 devices - you should use
+  the CATC NetMate driver for those. If you are not sure which one
+  you need, select both, and the correct one should be selected for
+  you.
+
+  This driver makes the adapter appear as a normal Ethernet interface,
+  typically on eth0, if it is the only ethernet device, or perhaps on
+  eth1, if you have a PCI or ISA ethernet card installed.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called kaweth.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_PEGASUS
+  Say Y here if you know you have Pegasus or Pegasus-II based adapter.
+  If in doubt then look at linux/drivers/usb/pegasus.h for the complete
+  list of supported devices.
+  If your particular adapter is not in the list and you are _sure_ it
+  is Pegasus or Pegasus II based then send me (petkan@users.sourceforge.net)
+  vendor and device IDs.
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called pegasus.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_RTL8150
+  Say Y here if you have RTL8150 based usb-ethernet adapter.
+  Send me (petkan@users.sourceforge.net) any comments you may have.
+  You can also check for updates at http://pegasus2.sourceforge.net/
+
+  This code is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called rtl8150.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.
+
+CONFIG_USB_USBNET
+  This driver supports network links over USB with USB "Network"
+  or "data transfer" cables, often used to network laptops to PCs.
+  Such cables have chips from suppliers such as Belkin/eTEK, GeneSys
+  (GeneLink), NetChip and Prolific. Intelligent USB devices could also
+  use this approach to provide Internet access, using standard USB
+  cabling. You can find these chips also on some motherboards with
+  USB PC2PC support.
+
+  These links will have names like "usb0", "usb1", etc.  They act
+  like two-node Ethernets, so you can use 802.1d Ethernet Bridging
+  (CONFIG_BRIDGE) to simplify your network routing.
+
+  This code is also available as a kernel module (code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called usbnet.o. If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt>.

drivers/usb/net/usbnet.c

 /*
  * USB Host-to-Host Links
- * Copyright (C) 2000-2001 by David Brownell <dbrownell@users.sourceforge.net>
+ * Copyright (C) 2000-2002 by David Brownell <dbrownell@users.sourceforge.net>
  */
 
 /*
@@ -62,6 +62,7 @@
  * 18-dec-2000	(db) tx watchdog, "net1080" renaming to "usbnet", device_info
  *		and prolific support, isolate net1080-specific bits, cleanup.
  *		fix unlink_urbs oops in D3 PM resume code path.
+ *
  * 02-feb-2001	(db) fix tx skb sharing, packet length, match_flags, ...
  * 08-feb-2001	stubbed in "linuxdev", maybe the SA-1100 folk can use it;
  *		AnchorChips 2720 support (from spec) for testing;
@@ -83,6 +84,11 @@
  *		tie mostly to (sub)driver info.  Workaround some PL-2302
  *		chips that seem to reject SET_INTERFACE requests.
  *
+ * 06-apr-2002	Added ethtool support, based on a patch from Brad Hards.
+ *		Level of diagnostics is more configurable; they use device
+ *		location (usb_device->devpath) instead of address (2.5).
+ *		For tx_fixup, memflags can't be NOIO.
+ *
  *-------------------------------------------------------------------------*/
 
 #include <linux/config.h>
@@ -93,6 +99,8 @@
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/random.h>
+#include <linux/ethtool.h>
+#include <asm/uaccess.h>
 #include <asm/unaligned.h>
 
 // #define	DEBUG			// error path messages, extra info
@@ -113,6 +121,8 @@
 #define	CONFIG_USB_PL2301
 
 
+#define DRIVER_VERSION		"06-Apr-2002"
+
 /*-------------------------------------------------------------------------*/
 
 /*
@@ -164,6 +174,7 @@ struct usbnet {
 	// protocol/interface state
 	struct net_device	net;
 	struct net_device_stats	stats;
+	int			msg_level;
 
 #ifdef CONFIG_USB_NET1080
 	u16			packet_id;
@@ -224,6 +235,13 @@ struct skb_data {	// skb->cb is one of these
 	size_t			length;
 };
 
+static const char driver_name [] = "usbnet";
+
+/* use ethtool to change the level for any given device */
+static int msg_level = 1;
+MODULE_PARM (msg_level, "i");
+MODULE_PARM_DESC (msg_level, "Initial message level (default = 1)");
+
 
 #define	mutex_lock(x)	down(x)
 #define	mutex_unlock(x)	up(x)
@@ -241,7 +259,9 @@ struct skb_data {	// skb->cb is one of these
 #endif
 
 #define devinfo(usbnet, fmt, arg...) \
-	printk(KERN_INFO "%s: " fmt "\n" , (usbnet)->net.name, ## arg)
+	do { if ((usbnet)->msg_level >= 1) \
+	printk(KERN_INFO "%s: " fmt "\n" , (usbnet)->net.name, ## arg); \
+	} while (0)
 
 
 #ifdef	CONFIG_USB_AN2720
@@ -948,10 +968,11 @@ static int net1080_reset (struct usbnet *dev)
 			MK_TTL (NC_READ_TTL_MS, TTL_OTHER (ttl)) );
 	dbg ("%s: assigned TTL, %d ms", dev->net.name, NC_READ_TTL_MS);
 
-	devdbg (dev, "port %c, peer %sconnected",
-		(status & STATUS_PORT_A) ? 'A' : 'B',
-		(status & STATUS_CONN_OTHER) ? "" : "dis"
-		);
+	if (dev->msg_level >= 2)
+		devinfo (dev, "port %c, peer %sconnected",
+			(status & STATUS_PORT_A) ? 'A' : 'B',
+			(status & STATUS_CONN_OTHER) ? "" : "dis"
+			);
 	retval = 0;
 
 done:
@@ -1441,10 +1462,11 @@ static int usbnet_stop (struct net_device *net)
 	mutex_lock (&dev->mutex);
 	netif_stop_queue (net);
 
-	devdbg (dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld",
-		dev->stats.rx_packets, dev->stats.tx_packets, 
-		dev->stats.rx_errors, dev->stats.tx_errors
-		);
+	if (dev->msg_level >= 2)
+		devinfo (dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld",
+			dev->stats.rx_packets, dev->stats.tx_packets, 
+			dev->stats.rx_errors, dev->stats.tx_errors
+			);
 
 	// ensure there are no more active urbs
 	add_wait_queue (&unlink_wakeup, &wait);
@@ -1482,9 +1504,10 @@ static int usbnet_open (struct net_device *net)
 
 	// put into "known safe" state
 	if (info->reset && (retval = info->reset (dev)) < 0) {
-		devinfo (dev, "open reset fail (%d) usbnet %03d/%03d, %s",
+		devinfo (dev, "open reset fail (%d) usbnet bus%d%s, %s",
 			retval,
-			dev->udev->bus->busnum, dev->udev->devnum,
+			// FIXME busnum is unstable
+			dev->udev->bus->busnum, dev->udev->devpath,
 			info->description);
 		goto done;
 	}
@@ -1496,14 +1519,16 @@ static int usbnet_open (struct net_device *net)
 	}
 
 	netif_start_queue (net);
-	devdbg (dev, "open: enable queueing (rx %d, tx %d) mtu %d %s framing",
-		RX_QLEN, TX_QLEN, dev->net.mtu,
-		(info->flags & (FLAG_FRAMING_NC | FLAG_FRAMING_GL))
-		    ? ((info->flags & FLAG_FRAMING_NC)
-			? "NetChip"
-			: "GeneSys")
-		    : "raw"
-		);
+	if (dev->msg_level >= 2)
+		devinfo (dev, "open: enable queueing "
+				"(rx %d, tx %d) mtu %d %s framing",
+			RX_QLEN, TX_QLEN, dev->net.mtu,
+			(info->flags & (FLAG_FRAMING_NC | FLAG_FRAMING_GL))
+			    ? ((info->flags & FLAG_FRAMING_NC)
+				? "NetChip"
+				: "GeneSys")
+			    : "raw"
+			);
 
 	// delay posting reads until we're fully open
 	tasklet_schedule (&dev->bh);
@@ -1514,6 +1539,80 @@ static int usbnet_open (struct net_device *net)
 
 /*-------------------------------------------------------------------------*/
 
+static int usbnet_ethtool_ioctl (struct net_device *net, void *useraddr)
+{
+	struct usbnet	*dev = (struct usbnet *) net->priv;
+	u32		cmd;
+
+	if (get_user (cmd, (u32 *)useraddr))
+		return -EFAULT;
+	switch (cmd) {
+
+	case ETHTOOL_GDRVINFO: {	/* get driver info */
+		struct ethtool_drvinfo		info;
+
+		memset (&info, 0, sizeof info);
+		info.cmd = ETHTOOL_GDRVINFO;
+		strncpy (info.driver, driver_name, sizeof info.driver);
+		strncpy (info.version, DRIVER_VERSION, sizeof info.version);
+		strncpy (info.fw_version, dev->driver_info->description,
+			sizeof info.fw_version);
+		snprintf (info.bus_info, sizeof info.bus_info, "USB bus%d%s",
+			/* FIXME busnums are bogus/unstable IDs */
+			dev->udev->bus->busnum, dev->udev->devpath);
+		if (copy_to_user (useraddr, &info, sizeof (info)))
+			return -EFAULT;
+		return 0;
+		}
+
+	case ETHTOOL_GLINK: 		/* get link status */
+		if (dev->driver_info->check_connect) {
+			struct ethtool_value	edata = { ETHTOOL_GLINK };
+
+			edata.data = dev->driver_info->check_connect (dev);
+			if (copy_to_user (useraddr, &edata, sizeof (edata)))
+				return -EFAULT;
+			return 0;
+		}
+		break;
+
+	case ETHTOOL_GMSGLVL: {		/* get message-level */
+		struct ethtool_value	edata = {ETHTOOL_GMSGLVL};
+
+		edata.data = dev->msg_level;
+		if (copy_to_user (useraddr, &edata, sizeof (edata)))
+			return -EFAULT;
+		return 0;
+		}
+
+	case ETHTOOL_SMSGLVL: {		/* set message-level */
+		struct ethtool_value	edata;
+
+		if (copy_from_user (&edata, useraddr, sizeof (edata)))
+			return -EFAULT;
+		dev->msg_level = edata.data;
+		return 0;
+		}
+	
+	/* could also map RINGPARAM to RX/TX QLEN */
+
+	}
+        /* Note that the ethtool user space code requires EOPNOTSUPP */
+	return -EOPNOTSUPP;
+}
+
+static int usbnet_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
+{
+	switch (cmd) {
+	case SIOCETHTOOL:
+		return usbnet_ethtool_ioctl (net, (void *)rq->ifr_data);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
 /* usb_clear_halt cannot be called in interrupt context */
 
 static void
@@ -1576,12 +1675,10 @@ static int usbnet_start_xmit (struct sk_buff *skb, struct net_device *net)
 	struct nc_trailer	*trailer = 0;
 #endif	/* CONFIG_USB_NET1080 */
 
-	flags = in_interrupt () ? GFP_ATOMIC : GFP_NOIO; /* might be used for nfs */
-
 	// some devices want funky USB-level framing, for
 	// win32 driver (usually) and/or hardware quirks
 	if (info->tx_fixup) {
-		skb = info->tx_fixup (dev, skb, flags);
+		skb = info->tx_fixup (dev, skb, GFP_ATOMIC);
 		if (!skb) {
 			dbg ("can't tx_fixup skb");
 			goto drop;
@@ -1750,8 +1847,9 @@ static void usbnet_disconnect (struct usb_device *udev, void *ptr)
 {
 	struct usbnet	*dev = (struct usbnet *) ptr;
 
-	devinfo (dev, "unregister usbnet %03d/%03d, %s",
-		udev->bus->busnum, udev->devnum,
+	devinfo (dev, "unregister usbnet bus%d%s, %s",
+		// FIXME busnum is unstable
+		udev->bus->busnum, udev->devpath,
 		dev->driver_info->description);
 	
 	unregister_netdev (&dev->net);
@@ -1811,6 +1909,7 @@ usbnet_probe (struct usb_device *udev, unsigned ifnum,
 	usb_inc_dev_use (udev);
 	dev->udev = udev;
 	dev->driver_info = info;
+	dev->msg_level = msg_level;
 	INIT_LIST_HEAD (&dev->dev_list);
 	skb_queue_head_init (&dev->rxq);
 	skb_queue_head_init (&dev->txq);
@@ -1836,10 +1935,12 @@ usbnet_probe (struct usb_device *udev, unsigned ifnum,
 	net->stop = usbnet_stop;
 	net->watchdog_timeo = TX_TIMEOUT_JIFFIES;
 	net->tx_timeout = usbnet_tx_timeout;
+	net->do_ioctl = usbnet_ioctl;
 
 	register_netdev (&dev->net);
-	devinfo (dev, "register usbnet %03d/%03d, %s",
-		udev->bus->busnum, udev->devnum,
+	devinfo (dev, "register usbnet bus%d%s, %s",
+		// FIXME busnum is unstable
+		udev->bus->busnum, udev->devpath,
 		dev->driver_info->description);
 
 	// ok, it's ready to go.
@@ -1936,7 +2037,7 @@ static const struct usb_device_id	products [] = {
 MODULE_DEVICE_TABLE (usb, products);
 
 static struct usb_driver usbnet_driver = {
-	name:		"usbnet",
+	name:		driver_name,
 	id_table:	products,
 	probe:		usbnet_probe,
 	disconnect:	usbnet_disconnect,

include/linux/usb.h

@@ -305,6 +305,7 @@ struct usb_qualifier_descriptor {
 } __attribute__ ((packed));
 
 /* helpers for driver access to descriptors */
+extern int usb_ifnum_to_ifpos(struct usb_device *dev, unsigned ifnum);
 extern struct usb_interface *
 	usb_ifnum_to_if(struct usb_device *dev, unsigned ifnum);
 extern struct usb_endpoint_descriptor *
@@ -470,8 +471,10 @@ struct usb_device_id {
 
 /**
  * struct usb_driver - identifies USB driver to usbcore
- * @owner: pointer to the module owner of this driver
- * @name: The driver name should be unique among USB drivers
+ * @owner: Pointer to the module owner of this driver; initialize
+ *	it using THIS_MODULE.
+ * @name: The driver name should be unique among USB drivers,
+ *	and should normally be the same as the module name.
  * @probe: Called to see if the driver is willing to manage a particular
  *	interface on a device.  The probe routine returns a handle that 
  *	will later be provided to disconnect(), or a null pointer to
@@ -506,7 +509,7 @@ struct usb_device_id {
  * is used by both user and kernel mode hotplugging support.
  *
  * The probe() and disconnect() methods are called in a context where
- * they can sleep, but they should avoid abusing the privilage.  Most
+ * they can sleep, but they should avoid abusing the privilege.  Most
  * work to connect to a device should be done when the device is opened,
  * and undone at the last close.  The disconnect code needs to address
  * concurrency issues with respect to open() and close() methods, as
@@ -959,24 +962,6 @@ struct usb_tt {
 };
 
 
-/* -------------------------------------------------------------------------- */
-
-/* Enumeration is only for the hub driver, or HCD virtual root hubs */
-extern struct usb_device *usb_alloc_dev(struct usb_device *parent,
-	struct usb_bus *);
-extern void usb_free_dev(struct usb_device *);
-extern int usb_new_device(struct usb_device *dev);
-extern void usb_connect(struct usb_device *dev);
-extern void usb_disconnect(struct usb_device **);
-
-#ifndef _LINUX_HUB_H
-/* exported to hub driver ONLY to support usb_reset_device () */
-extern int usb_get_configuration(struct usb_device *dev);
-extern void usb_set_maxpacket(struct usb_device *dev);
-extern void usb_destroy_configuration(struct usb_device *dev);
-extern int usb_set_address(struct usb_device *dev);
-#endif /* _LINUX_HUB_H */
-
 /* -------------------------------------------------------------------------- */
 
 /* This is arbitrary.
@@ -1047,11 +1032,52 @@ extern int usb_reset_device(struct usb_device *dev);
 /* for drivers using iso endpoints */
 extern int usb_get_current_frame_number (struct usb_device *usb_dev);
 
-/* drivers must track when they bind to a device's interfaces */
-extern void usb_inc_dev_use(struct usb_device *);
-#define usb_dec_dev_use usb_free_dev
+/**
+ * usb_inc_dev_use - record another reference to a device
+ * @dev: the device being referenced
+ *
+ * Each live reference to a device should be refcounted.
+ *
+ * Drivers for USB interfaces should normally record such references in
+ * their probe() methods, when they bind to an interface, and release
+ * them usb_dec_dev_use(), in their disconnect() methods.
+ */
+static inline void usb_inc_dev_use (struct usb_device *dev)
+{
+	atomic_inc (&dev->refcnt);
+}
+
+/**
+ * usb_dec_dev_use - drop a reference to a device
+ * @dev: the device no longer being referenced
+ *
+ * Each live reference to a device should be refcounted.
+ *
+ * Drivers for USB interfaces should normally release such references in
+ * their disconnect() methods, and record them in probe().
+ *
+ * Note that driver disconnect() methods must guarantee that when they
+ * return, all of their outstanding references to the device (and its
+ * interfaces) are cleaned up.  That means that all pending URBs from
+ * this driver must have completed, and that no more copies of the device
+ * handle are saved in driver records (including other kernel threads).
+ */
+static inline void usb_dec_dev_use (struct usb_device *dev)
+{
+	if (atomic_dec_and_test (&dev->refcnt)) {
+		/* May only go to zero when usbcore finishes
+		 * usb_disconnect() processing:  khubd or HCDs.
+		 *
+		 * If you hit this BUG() it's likely a problem
+		 * with some driver's disconnect() routine.
+		 */
+		BUG ();
+	}
+}
+
 
 /* used these for multi-interface device registration */
+extern int usb_find_interface_driver_for_ifnum(struct usb_device *dev, unsigned int ifnum);
 extern void usb_driver_claim_interface(struct usb_driver *driver,
 			struct usb_interface *iface, void* priv);
 extern int usb_interface_claimed(struct usb_interface *iface);

include/linux/usbdevice_fs.h

@@ -142,6 +142,8 @@ struct usbdevfs_hub_portinfo {
 #define USBDEVFS_HUB_PORTINFO      _IOR('U', 19, struct usbdevfs_hub_portinfo)
 #define USBDEVFS_RESET             _IO('U', 20)
 #define USBDEVFS_CLEAR_HALT        _IOR('U', 21, unsigned int)
+#define USBDEVFS_DISCONNECT        _IO('U', 22)
+#define USBDEVFS_CONNECT           _IO('U', 23)
 
 /* --------------------------------------------------------------------- */