Merge tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC updates from Olof Johansson: "A few SoC (code) changes have queued up this cycle, mostly for minor changes and some refactoring and cleanup of legacy platforms. This branch also contains a few of the fixes that weren't sent in by the end of the release (all fairly minor). - Adding an additional maintainer for the TEE subsystem (Sumit Garg) - Quite a significant modernization of the IXP4xx platforms by Linus Walleij, revisiting with a new PCI host driver/binding, removing legacy mach/* include dependencies and moving platform detection/config to drivers/soc. Also some updates/cleanup of platform data. - Core power domain support for Tegra platforms, and some improvements in build test coverage by adding stubs for compile test targets. - A handful of updates to i.MX platforms, adding legacy (non-PSCI) SMP support on i.MX7D, SoC ID setup for i.MX50, removal of platform data and board fixups for iMX6/7. ... and a few smaller changes and fixes for Samsung, OMAP, Allwinner, Rockchip" * tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (53 commits) MAINTAINERS: Add myself as TEE subsystem reviewer ixp4xx: fix spelling mistake in Kconfig "Devce" -> "Device" hw_random: ixp4xx: Add OF support hw_random: ixp4xx: Add DT bindings hw_random: ixp4xx: Turn into a module hw_random: ixp4xx: Use SPDX license tag hw_random: ixp4xx: enable compile-testing pata: ixp4xx: split platform data to its own header soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h PCI: ixp4xx: Add a new driver for IXP4xx PCI: ixp4xx: Add device tree bindings for IXP4xx ARM/ixp4xx: Make NEED_MACH_IO_H optional ARM/ixp4xx: Move the virtual IObases MAINTAINERS: ARM/MStar/Sigmastar SoCs: Add a link to the MStar tree ARM: debug: add UART early console support for MSTAR SoCs ARM: dts: ux500: Fix LED probing ARM: imx: add smp support for imx7d ARM: imx6q: drop of_platform_default_populate() from init_machine arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory soc/tegra: fuse: Fix Tegra234-only builds ...

Merge tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Olof Johansson: "A few SoC (code) changes have queued up this cycle, mostly for minor changes and some refactoring and cleanup of legacy platforms. This branch also contains a few of the fixes that weren't sent in by the end of the release (all fairly minor). - Adding an additional maintainer for the TEE subsystem (Sumit Garg) - Quite a significant modernization of the IXP4xx platforms by Linus Walleij, revisiting with a new PCI host driver/binding, removing legacy mach/* include dependencies and moving platform detection/config to drivers/soc. Also some updates/cleanup of platform data. - Core power domain support for Tegra platforms, and some improvements in build test coverage by adding stubs for compile test targets. - A handful of updates to i.MX platforms, adding legacy (non-PSCI) SMP support on i.MX7D, SoC ID setup for i.MX50, removal of platform data and board fixups for iMX6/7. ... and a few smaller changes and fixes for Samsung, OMAP, Allwinner, Rockchip" * tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (53 commits) MAINTAINERS: Add myself as TEE subsystem reviewer ixp4xx: fix spelling mistake in Kconfig "Devce" -> "Device" hw_random: ixp4xx: Add OF support hw_random: ixp4xx: Add DT bindings hw_random: ixp4xx: Turn into a module hw_random: ixp4xx: Use SPDX license tag hw_random: ixp4xx: enable compile-testing pata: ixp4xx: split platform data to its own header soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h PCI: ixp4xx: Add a new driver for IXP4xx PCI: ixp4xx: Add device tree bindings for IXP4xx ARM/ixp4xx: Make NEED_MACH_IO_H optional ARM/ixp4xx: Move the virtual IObases MAINTAINERS: ARM/MStar/Sigmastar SoCs: Add a link to the MStar tree ARM: debug: add UART early console support for MSTAR SoCs ARM: dts: ux500: Fix LED probing ARM: imx: add smp support for imx7d ARM: imx6q: drop of_platform_default_populate() from init_machine arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory soc/tegra: fuse: Fix Tegra234-only builds ...
6e207b88 · Linus Torvalds · b6fd9e25 · 42accadb · 6e207b88 · 6e207b88
Commit 6e207b88 authored Jul 10, 2021 by Linus Torvalds
75 changed files
--- a/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml
+++ b/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/intel,ixp4xx-pci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx PCI controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: PCI host controller found in the Intel IXP4xx SoC series.
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - intel,ixp42x-pci
+          - intel,ixp43x-pci
+    description: The two supported variants are ixp42x and ixp43x,
+      though more variants may exist.
+
+  reg:
+    items:
+      - description: IXP4xx-specific registers
+
+  interrupts:
+    items:
+      - description: Main PCI interrupt
+      - description: PCI DMA interrupt 1
+      - description: PCI DMA interrupt 2
+
+  ranges:
+    maxItems: 2
+    description: Typically one memory range of 64MB and one IO
+      space range of 64KB.
+
+  dma-ranges:
+    maxItems: 1
+    description: The DMA range tells the PCI host which addresses
+      the RAM is at. It can map only 64MB so if the RAM is bigger
+      than 64MB the DMA access has to be restricted to these
+      addresses.
+
+  "#interrupt-cells": true
+
+  interrupt-map: true
+
+  interrupt-map-mask:
+    items:
+      - const: 0xf800
+      - const: 0
+      - const: 0
+      - const: 7
+
+required:
+  - compatible
+  - reg
+  - dma-ranges
+  - "#interrupt-cells"
+  - interrupt-map
+  - interrupt-map-mask
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pci@c0000000 {
+      compatible = "intel,ixp43x-pci";
+      reg = <0xc0000000 0x1000>;
+      #address-cells = <3>;
+      #size-cells = <2>;
+      device_type = "pci";
+      bus-range = <0x00 0xff>;
+
+      ranges =
+        <0x02000000 0 0x48000000 0x48000000 0 0x04000000>,
+        <0x01000000 0 0x00000000 0x4c000000 0 0x00010000>;
+      dma-ranges =
+        <0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
+
+      #interrupt-cells = <1>;
+      interrupt-map-mask = <0xf800 0 0 7>;
+      interrupt-map =
+        <0x0800 0 0 1 &gpio0 11 3>, /* INT A on slot 1 is irq 11 */
+        <0x0800 0 0 2 &gpio0 10 3>, /* INT B on slot 1 is irq 10 */
+        <0x0800 0 0 3 &gpio0 9  3>, /* INT C on slot 1 is irq 9 */
+        <0x0800 0 0 4 &gpio0 8  3>, /* INT D on slot 1 is irq 8 */
+        <0x1000 0 0 1 &gpio0 10 3>, /* INT A on slot 2 is irq 10 */
+        <0x1000 0 0 2 &gpio0 9  3>, /* INT B on slot 2 is irq 9 */
+        <0x1000 0 0 3 &gpio0 8  3>, /* INT C on slot 2 is irq 8 */
+        <0x1000 0 0 4 &gpio0 11 3>, /* INT D on slot 2 is irq 11 */
+        <0x1800 0 0 1 &gpio0 9  3>, /* INT A on slot 3 is irq 9 */
+        <0x1800 0 0 2 &gpio0 8  3>, /* INT B on slot 3 is irq 8 */
+        <0x1800 0 0 3 &gpio0 11 3>, /* INT C on slot 3 is irq 11 */
+        <0x1800 0 0 4 &gpio0 10 3>; /* INT D on slot 3 is irq 10 */
+    };
--- a/Documentation/devicetree/bindings/rng/intel,ixp46x-rng.yaml
+++ b/Documentation/devicetree/bindings/rng/intel,ixp46x-rng.yaml
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rng/intel,ixp46x-rng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP46x RNG bindings
+
+description: |
+  The Intel IXP46x has a random number generator at a fixed physical
+  location in memory. Each read is guaranteed to provide a unique
+  32 bit random number.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    const: intel,ixp46x-rng
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@70002100 {
+      compatible = "intel,ixp46x-rng";
+      reg = <0x70002100 4>;
+    };
+
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2210,6 +2210,7 @@ M:	Daniel Palmer <daniel@thingy.jp>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 W:	http://linux-chenxing.org/
+T:	git git://github.com/linux-chenxing/linux.git
 F:	Documentation/devicetree/bindings/arm/mstar/*
 F:	Documentation/devicetree/bindings/clock/mstar,msc313-mpll.yaml
 F:	Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
@@ -2479,9 +2480,12 @@ F:	drivers/*/*/*s3c24*
 F:	drivers/*/*s3c24*
 F:	drivers/*/*s3c64xx*
 F:	drivers/*/*s5pv210*
+F:	drivers/clocksource/samsung_pwm_timer.c
 F:	drivers/memory/samsung/
+F:	drivers/pwm/pwm-samsung.c
 F:	drivers/soc/samsung/
 F:	drivers/tty/serial/samsung*
+F:	include/clocksource/samsung_pwm.h
 F:	include/linux/platform_data/*s3c*
 F:	include/linux/serial_s3c.h
 F:	include/linux/soc/samsung/
@@ -9381,6 +9385,7 @@ F:	include/linux/soc/ixp4xx/qmgr.h
 INTEL IXP4XX RANDOM NUMBER GENERATOR SUPPORT
 M:	Deepak Saxena <dsaxena@plexity.net>
 S:	Maintained
+F:	Documentation/devicetree/bindings/display/intel,ixp46x-rng.yaml
 F:	drivers/char/hw_random/ixp4xx-rng.c

 INTEL KEEM BAY DRM DRIVER
@@ -13510,12 +13515,6 @@ L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	arch/arm/mach-omap2/omap_hwmod*data*

-OMAP HWMOD DATA FOR OMAP4-BASED DEVICES
-M:	Benoît Cousson <bcousson@baylibre.com>
-L:	linux-omap@vger.kernel.org
-S:	Maintained
-F:	arch/arm/mach-omap2/omap_hwmod_44xx_data.c
-
 OMAP HWMOD SUPPORT
 M:	Benoît Cousson <bcousson@baylibre.com>
 M:	Paul Walmsley <paul@pwsan.com>
@@ -14179,6 +14178,12 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
 F:	drivers/pci/controller/dwc/pcie-fu740.c

+PCI DRIVER FOR INTEL IXP4XX
+M:	Linus Walleij <linus.walleij@linaro.org>
+S:	Maintained
+F:	Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml
+F:	drivers/pci/controller/pci-ixp4xx.c
+
 PCI DRIVER FOR INTEL VOLUME MANAGEMENT DEVICE (VMD)
 M:	Jonathan Derrick <jonathan.derrick@intel.com>
 L:	linux-pci@vger.kernel.org
@@ -18126,6 +18131,7 @@ F:	include/media/i2c/tw9910.h

 TEE SUBSYSTEM
 M:	Jens Wiklander <jens.wiklander@linaro.org>
+R:	Sumit Garg <sumit.garg@linaro.org>
 L:	op-tee@lists.trustedfirmware.org
 S:	Maintained
 F:	Documentation/staging/tee.rst

--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -394,7 +394,8 @@ config ARCH_IXP4XX
 	select HAVE_PCI
 	select IXP4XX_IRQ
 	select IXP4XX_TIMER
-	select NEED_MACH_IO_H
+	# With the new PCI driver this is not needed
+	select NEED_MACH_IO_H if PCI_IXP4XX_LEGACY
 	select USB_EHCI_BIG_ENDIAN_DESC
 	select USB_EHCI_BIG_ENDIAN_MMIO
 	help

--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -609,6 +609,14 @@ choice
 		  when u-boot hands over to the kernel, the system
 		  silently crashes, with no serial output at all.

+	config DEBUG_MSTARV7_PMUART
+		bool "Kernel low-level debugging messages via MSTARV7 PM UART"
+		depends on ARCH_MSTARV7
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  for MSTAR ARMv7-based platforms on PM UART.
+
 	config DEBUG_MT6589_UART0
 		bool "Mediatek mt6589 UART0"
 		depends on ARCH_MEDIATEK
@@ -1607,6 +1615,7 @@ config DEBUG_UART_PHYS
 	default 0x18000400 if DEBUG_BCM_HR2
 	default 0x18023000 if DEBUG_BCM_IPROC_UART3
 	default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
+	default 0x1f221000 if DEBUG_MSTARV7_PMUART
 	default 0x20001000 if DEBUG_HIP01_UART
 	default 0x20060000 if DEBUG_RK29_UART0
 	default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
@@ -1724,6 +1733,7 @@ config DEBUG_UART_VIRT
 	default 0xf0100000 if DEBUG_DIGICOLOR_UA0
 	default 0xf01fb000 if DEBUG_NOMADIK_UART
 	default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836
+	default 0xf0221000 if DEBUG_MSTARV7_PMUART
 	default 0xf1000300 if DEBUG_BCM_5301X
 	default 0xf1000400 if DEBUG_BCM_HR2
 	default 0xf1002000 if DEBUG_MT8127_UART0
@@ -1805,8 +1815,8 @@ config DEBUG_UART_VIRT
 	default 0xfedc0000 if DEBUG_EP93XX
 	default 0xfee003f8 if DEBUG_FOOTBRIDGE_COM1
 	default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
-	default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
-	default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
+	default 0xfec00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
+	default 0xfec00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
 	default 0xfef36000 if DEBUG_HIGHBANK_UART
 	default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
 	default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
@@ -1829,6 +1839,7 @@ config DEBUG_UART_8250_SHIFT
 	default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \
 		DEBUG_BCM_HR2 || DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || \
 		DEBUG_OMAP7XXUART3
+	default 3 if DEBUG_MSTARV7_PMUART
 	default 2

 config DEBUG_UART_8250_WORD

--- a/arch/arm/boot/dts/am5718.dtsi
+++ b/arch/arm/boot/dts/am5718.dtsi
@@ -17,17 +17,13 @@ / {
 * VCP1, VCP2
 * MLB
 * ISS
- * USB3, USB4
+ * USB3
 */

 &usb3_tm {
 	status = "disabled";
 };

-&usb4_tm {
-	status = "disabled";
-};
-
 &atl_tm {
 	status = "disabled";
 };
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -4129,28 +4129,6 @@ usb3: usb@10000 {
 			};
 		};

-		usb4_tm: target-module@140000 {		/* 0x48940000, ap 75 3c.0 */
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x140000 0x4>,
-			      <0x140010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
-			clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x140000 0x20000>;
-		};
-
 		target-module@170000 {			/* 0x48970000, ap 21 0a.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
 			reg = <0x170010 0x4>;

--- a/arch/arm/boot/dts/dra71x.dtsi
+++ b/arch/arm/boot/dts/dra71x.dtsi
@@ -11,7 +11,3 @@
 &rtctarget {
 	status = "disabled";
 };
-
-&usb4_tm {
-	status = "disabled";
-};
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -108,7 +108,3 @@ &pcie1_ep {
 &pcie2_rc {
 	compatible = "ti,dra726-pcie-rc", "ti,dra7-pcie";
 };
-
-&usb4_tm {
-	status = "disabled";
-};
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -49,49 +49,6 @@ dsp2_system: dsp_system@41500000 {
 			reg = <0x41500000 0x100>;
 		};

-		target-module@48940000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x48940000 0x4>,
-			      <0x48940010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x48940000 0x20000>;
-
-			omap_dwc3_4: omap_dwc3_4@0 {
-				compatible = "ti,dwc3";
-				reg = <0 0x10000>;
-				interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				utmi-mode = <2>;
-				ranges;
-				status = "disabled";
-				usb4: usb@10000 {
-					compatible = "snps,dwc3";
-					reg = <0x10000 0x17000>;
-					interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-names = "peripheral",
-							  "host",
-							  "otg";
-					maximum-speed = "high-speed";
-					dr_mode = "otg";
-				};
-			};
-		};

 		target-module@41501000 {
 			compatible = "ti,sysc-omap2", "ti,sysc";
@@ -224,3 +181,52 @@ &pcie1_ep {
 &pcie2_rc {
 	compatible = "ti,dra746-pcie-rc", "ti,dra7-pcie";
 };
+
+&l4_per3 {
+	segment@0 {
+		usb4_tm: target-module@140000 {         /* 0x48940000, ap 75 3c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x140000 0x4>,
+			      <0x140010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x140000 0x20000>;
+
+			omap_dwc3_4: omap_dwc3_4@0 {
+				compatible = "ti,dwc3";
+				reg = <0 0x10000>;
+				interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				utmi-mode = <2>;
+				ranges;
+				status = "disabled";
+				usb4: usb@10000 {
+					compatible = "snps,dwc3";
+					reg = <0x10000 0x17000>;
+					interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "peripheral",
+							  "host",
+							  "otg";
+					maximum-speed = "high-speed";
+					dr_mode = "otg";
+				};
+			};
+		};
+	};
+};
--- a/arch/arm/boot/dts/qcom-sdx55-t55.dts
+++ b/arch/arm/boot/dts/qcom-sdx55-t55.dts
@@ -250,7 +250,7 @@ nand@0 {
 		nand-ecc-step-size = <512>;
 		nand-bus-width = <8>;
 		/* efs2 partition is secured */
-		secure-regions = <0x500000 0xb00000>;
+		secure-regions = /bits/ 64 <0x500000 0xb00000>;
 	};
 };


--- a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
+++ b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
@@ -250,8 +250,8 @@ nand@0 {
 		nand-ecc-step-size = <512>;
 		nand-bus-width = <8>;
 		/* ico and efs2 partitions are secured */
-		secure-regions = <0x500000 0x500000
-				  0xa00000 0xb00000>;
+		secure-regions = /bits/ 64 <0x500000 0x500000
+					    0xa00000 0xb00000>;
 	};
 };


--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -4,6 +4,7 @@
 */

 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 #include "ste-href-family-pinctrl.dtsi"

 / {
@@ -64,17 +65,20 @@ chan@0 {
 					reg = <0>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
 					linux,default-trigger = "heartbeat";
 				};
 				chan@1 {
 					reg = <1>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
 				};
 				chan@2 {
 					reg = <2>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
 				};
 			};
 			lp5521@34 {
@@ -88,16 +92,19 @@ chan@0 {
 					reg = <0>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
 				};
 				chan@1 {
 					reg = <1>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
 				};
 				chan@2 {
 					reg = <2>;
 					led-cur = /bits/ 8 <0x2f>;
 					max-cur = /bits/ 8 <0x5f>;
+					color = <LED_COLOR_ID_BLUE>;
 				};
 			};
 			bh1780@29 {

--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
@@ -85,7 +85,7 @@ &emac {
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";

 	status = "okay";
 };

--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -55,6 +55,7 @@ void __init exynos_sysram_init(void)
 		sysram_base_addr = of_iomap(node, 0);
 		sysram_base_phys = of_translate_address(node,
 					   of_get_address(node, 0, NULL, NULL));
+		of_node_put(node);
 		break;
 	}

@@ -62,6 +63,7 @@ void __init exynos_sysram_init(void)
 		if (!of_device_is_available(node))
 			continue;
 		sysram_ns_base_addr = of_iomap(node, 0);
+		of_node_put(node);
 		break;
 	}
 }

--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -35,7 +35,7 @@ obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o
 obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
 obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
 obj-$(CONFIG_HAVE_IMX_SRC) += src.o
-ifneq ($(CONFIG_SOC_IMX6)$(CONFIG_SOC_LS1021A),)
+ifneq ($(CONFIG_SOC_IMX6)$(CONFIG_SOC_IMX7D_CA7)$(CONFIG_SOC_LS1021A),)
 AFLAGS_headsmp.o :=-Wa,-march=armv7-a
 obj-$(CONFIG_SMP) += headsmp.o platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o

--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -68,11 +68,13 @@ void imx_set_cpu_arg(int cpu, u32 arg);
 void v7_secondary_startup(void);
 void imx_scu_map_io(void);
 void imx_smp_prepare(void);
+void imx_gpcv2_set_core1_pdn_pup_by_software(bool pdn);
 #else
 static inline void imx_scu_map_io(void) {}
 static inline void imx_smp_prepare(void) {}
 #endif
 void imx_src_init(void);
+void imx7_src_init(void);
 void imx_gpc_pre_suspend(bool arm_power_off);
 void imx_gpc_post_resume(void);
 void imx_gpc_mask_all(void);
@@ -131,6 +133,7 @@ static inline void imx_init_l2cache(void) {}
 #endif

 extern const struct smp_operations imx_smp_ops;
+extern const struct smp_operations imx7_smp_ops;
 extern const struct smp_operations ls1021a_smp_ops;

 #endif
--- a/arch/arm/mach-imx/headsmp.S
+++ b/arch/arm/mach-imx/headsmp.S
@@ -21,6 +21,15 @@ diag_reg_offset:

 ENTRY(v7_secondary_startup)
 ARM_BE8(setend be)			@ go BE8 if entered LE
+	mrc	p15, 0, r0, c0, c0, 0
+	lsl	r0, r0, #16
+	lsr	r0, r0, #20
+	/* 0xc07 is cortex A7's ID */
+	mov	r1, #0xc00
+	orr	r1, #0x7
+	cmp	r0, r1
+	beq	secondary_startup
+
 	set_diag_reg
 	b	secondary_startup
 ENDPROC(v7_secondary_startup)
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -11,6 +11,7 @@
 #include <asm/proc-fns.h>

 #include "common.h"
+#include "hardware.h"

 /*
 * platform-specific code to shutdown a CPU
@@ -40,5 +41,7 @@ int imx_cpu_kill(unsigned int cpu)
 			return 0;
 	imx_enable_cpu(cpu, false);
 	imx_set_cpu_arg(cpu, 0);
+	if (cpu_is_imx7d())
+		imx_gpcv2_set_core1_pdn_pup_by_software(true);
 	return 1;
 }
--- a/arch/arm/mach-imx/mach-imx50.c
+++ b/arch/arm/mach-imx/mach-imx50.c
@@ -9,6 +9,12 @@
 #include <asm/mach/arch.h>

 #include "common.h"
+#include "hardware.h"
+
+static void __init imx50_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX50);
+}

 static const char * const imx50_dt_board_compat[] __initconst = {
 	"fsl,imx50",
@@ -16,5 +22,6 @@ static const char * const imx50_dt_board_compat[] __initconst = {
 };

 DT_MACHINE_START(IMX50_DT, "Freescale i.MX50 (Device Tree Support)")
+	.init_early	= imx50_init_early,
 	.dt_compat	= imx50_dt_board_compat,
 MACHINE_END
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -40,27 +40,6 @@ static int ksz9021rn_phy_fixup(struct phy_device *phydev)
 	return 0;
 }

-static void mmd_write_reg(struct phy_device *dev, int device, int reg, int val)
-{
-	phy_write(dev, 0x0d, device);
-	phy_write(dev, 0x0e, reg);
-	phy_write(dev, 0x0d, (1 << 14) | device);
-	phy_write(dev, 0x0e, val);
-}
-
-static int ksz9031rn_phy_fixup(struct phy_device *dev)
-{
-	/*
-	 * min rx data delay, max rx/tx clock delay,
-	 * min rx/tx control delay
-	 */
-	mmd_write_reg(dev, 2, 4, 0);
-	mmd_write_reg(dev, 2, 5, 0);
-	mmd_write_reg(dev, 2, 8, 0x003ff);
-
-	return 0;
-}
-
 /*
 * fixup for PLX PEX8909 bridge to configure GPIO1-7 as output High
 * as they are used for slots1-7 PERST#
@@ -89,75 +68,11 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609, ventana_pciesw_early_fixup);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8606, ventana_pciesw_early_fixup);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8604, ventana_pciesw_early_fixup);

-static int ar8031_phy_fixup(struct phy_device *dev)
-{
-	u16 val;
-
-	/* To enable AR8031 output a 125MHz clk from CLK_25M */
-	phy_write(dev, 0xd, 0x7);
-	phy_write(dev, 0xe, 0x8016);
-	phy_write(dev, 0xd, 0x4007);
-
-	val = phy_read(dev, 0xe);
-	val &= 0xffe3;
-	val |= 0x18;
-	phy_write(dev, 0xe, val);
-
-	/* introduce tx clock delay */
-	phy_write(dev, 0x1d, 0x5);
-	val = phy_read(dev, 0x1e);
-	val |= 0x0100;
-	phy_write(dev, 0x1e, val);
-
-	return 0;
-}
-
-#define PHY_ID_AR8031	0x004dd074
-
-static int ar8035_phy_fixup(struct phy_device *dev)
-{
-	u16 val;
-
-	/* Ar803x phy SmartEEE feature cause link status generates glitch,
-	 * which cause ethernet link down/up issue, so disable SmartEEE
-	 */
-	phy_write(dev, 0xd, 0x3);
-	phy_write(dev, 0xe, 0x805d);
-	phy_write(dev, 0xd, 0x4003);
-
-	val = phy_read(dev, 0xe);
-	phy_write(dev, 0xe, val & ~(1 << 8));
-
-	/*
-	 * Enable 125MHz clock from CLK_25M on the AR8031.  This
-	 * is fed in to the IMX6 on the ENET_REF_CLK (V22) pad.
-	 * Also, introduce a tx clock delay.
-	 *
-	 * This is the same as is the AR8031 fixup.
-	 */
-	ar8031_phy_fixup(dev);
-
-	/*check phy power*/
-	val = phy_read(dev, 0x0);
-	if (val & BMCR_PDOWN)
-		phy_write(dev, 0x0, val & ~BMCR_PDOWN);
-
-	return 0;
-}
-
-#define PHY_ID_AR8035 0x004dd072
-
 static void __init imx6q_enet_phy_init(void)
 {
 	if (IS_BUILTIN(CONFIG_PHYLIB)) {
 		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
 				ksz9021rn_phy_fixup);
-		phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK,
-				ksz9031rn_phy_fixup);
-		phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffef,
-				ar8031_phy_fixup);
-		phy_register_fixup_for_uid(PHY_ID_AR8035, 0xffffffef,
-				ar8035_phy_fixup);
 	}
 }

@@ -257,9 +172,6 @@ static void __init imx6q_init_machine(void)
 				imx_get_soc_revision());

 	imx6q_enet_phy_init();
-
-	of_platform_default_populate(NULL, NULL, NULL);
-
 	imx_anatop_init();
 	cpu_is_imx6q() ?  imx6q_pm_init() : imx6dl_pm_init();
 	imx6q_1588_init();

--- a/arch/arm/mach-imx/mach-imx6sx.c
+++ b/arch/arm/mach-imx/mach-imx6sx.c
@@ -15,31 +15,6 @@
 #include "common.h"
 #include "cpuidle.h"

-static int ar8031_phy_fixup(struct phy_device *dev)
-{
-	u16 val;
-
-	/* Set RGMII IO voltage to 1.8V */
-	phy_write(dev, 0x1d, 0x1f);
-	phy_write(dev, 0x1e, 0x8);
-
-	/* introduce tx clock delay */
-	phy_write(dev, 0x1d, 0x5);
-	val = phy_read(dev, 0x1e);
-	val |= 0x0100;
-	phy_write(dev, 0x1e, val);
-
-	return 0;
-}
-
-#define PHY_ID_AR8031   0x004dd074
-static void __init imx6sx_enet_phy_init(void)
-{
-	if (IS_BUILTIN(CONFIG_PHYLIB))
-		phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff,
-					   ar8031_phy_fixup);
-}
-
 static void __init imx6sx_enet_clk_sel(void)
 {
 	struct regmap *gpr;
@@ -57,7 +32,6 @@ static void __init imx6sx_enet_clk_sel(void)

 static inline void imx6sx_enet_init(void)
 {
-	imx6sx_enet_phy_init();
 	imx6sx_enet_clk_sel();
 }


--- a/arch/arm/mach-imx/mach-imx7d.c
+++ b/arch/arm/mach-imx/mach-imx7d.c
@@ -14,25 +14,6 @@

 #include "common.h"

-static int ar8031_phy_fixup(struct phy_device *dev)
-{
-	u16 val;
-
-	/* Set RGMII IO voltage to 1.8V */
-	phy_write(dev, 0x1d, 0x1f);
-	phy_write(dev, 0x1e, 0x8);
-
-	/* disable phy AR8031 SmartEEE function. */
-	phy_write(dev, 0xd, 0x3);
-	phy_write(dev, 0xe, 0x805d);
-	phy_write(dev, 0xd, 0x4003);
-	val = phy_read(dev, 0xe);
-	val &= ~(0x1 << 8);
-	phy_write(dev, 0xe, val);
-
-	return 0;
-}
-
 static int bcm54220_phy_fixup(struct phy_device *dev)
 {
 	/* enable RXC skew select RGMII copper mode */
@@ -44,14 +25,11 @@ static int bcm54220_phy_fixup(struct phy_device *dev)
 	return 0;
 }

-#define PHY_ID_AR8031	0x004dd074
 #define PHY_ID_BCM54220	0x600d8589

 static void __init imx7d_enet_phy_init(void)
 {
 	if (IS_BUILTIN(CONFIG_PHYLIB)) {
-		phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff,
-					   ar8031_phy_fixup);
 		phy_register_fixup_for_uid(PHY_ID_BCM54220, 0xffffffff,
 					   bcm54220_phy_fixup);
 	}
@@ -91,7 +69,7 @@ static void __init imx7d_init_late(void)
 static void __init imx7d_init_irq(void)
 {
 	imx_init_revision_from_anatop();
-	imx_src_init();
+	imx7_src_init();
 	irqchip_init();
 }

@@ -102,6 +80,7 @@ static const char *const imx7d_dt_compat[] __initconst = {
 };

 DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual (Device Tree)")
+	.smp            = smp_ops(imx7_smp_ops),
 	.init_irq	= imx7d_init_irq,
 	.init_machine	= imx7d_init_machine,
 	.init_late      = imx7d_init_late,

--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -92,6 +92,32 @@ const struct smp_operations imx_smp_ops __initconst = {
 #endif
 };

+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+static void __init imx7_smp_init_cpus(void)
+{
+	struct device_node *np;
+	int i, ncores = 0;
+
+	/* The iMX7D SCU does not report core count, get it from DT */
+	for_each_of_cpu_node(np)
+		ncores++;
+
+	for (i = ncores; i < NR_CPUS; i++)
+		set_cpu_possible(i, false);
+}
+
+const struct smp_operations imx7_smp_ops __initconst = {
+	.smp_init_cpus		= imx7_smp_init_cpus,
+	.smp_boot_secondary	= imx_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= imx_cpu_die,
+	.cpu_kill		= imx_cpu_kill,
+#endif
+};
+
 #define DCFG_CCSR_SCRATCHRW1	0x200

 static int ls1021a_boot_secondary(unsigned int cpu, struct task_struct *idle)

--- a/arch/arm/mach-imx/src.c
+++ b/arch/arm/mach-imx/src.c
@@ -6,15 +6,19 @@

 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/reset-controller.h>
 #include <linux/smp.h>
 #include <asm/smp_plat.h>
 #include "common.h"
+#include "hardware.h"

 #define SRC_SCR				0x000
-#define SRC_GPR1			0x020
+#define SRC_GPR1_V1			0x020
+#define SRC_GPR1_V2			0x074
+#define SRC_GPR1(gpr_v2)		((gpr_v2) ? SRC_GPR1_V2 : SRC_GPR1_V1)
 #define BP_SRC_SCR_WARM_RESET_ENABLE	0
 #define BP_SRC_SCR_SW_GPU_RST		1
 #define BP_SRC_SCR_SW_VPU_RST		2
@@ -23,9 +27,18 @@
 #define BP_SRC_SCR_SW_IPU2_RST		12
 #define BP_SRC_SCR_CORE1_RST		14
 #define BP_SRC_SCR_CORE1_ENABLE		22
+/* below is for i.MX7D */
+#define SRC_A7RCR1			0x008
+#define BP_SRC_A7RCR1_A7_CORE1_ENABLE	1
+#define GPC_CPU_PGC_SW_PUP_REQ		0xf0
+#define GPC_CPU_PGC_SW_PDN_REQ		0xfc
+#define GPC_PGC_C1			0x840
+#define BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7	0x2

 static void __iomem *src_base;
 static DEFINE_SPINLOCK(scr_lock);
+static bool gpr_v2;
+static void __iomem *gpc_base;

 static const int sw_reset_bits[5] = {
 	BP_SRC_SCR_SW_GPU_RST,
@@ -73,17 +86,64 @@ static struct reset_controller_dev imx_reset_controller = {
 	.nr_resets = ARRAY_SIZE(sw_reset_bits),
 };

+static void imx_gpcv2_set_m_core_pgc(bool enable, u32 offset)
+{
+	writel_relaxed(enable, gpc_base + offset);
+}
+
+/*
+ * The motivation for bringing up the second i.MX7D core inside the kernel
+ * is that legacy vendor bootloaders usually do not implement PSCI support.
+ * This is a significant blocker for systems in the field that are running old
+ * bootloader versions to upgrade to a modern mainline kernel version, as only
+ * one CPU of the i.MX7D would be brought up.
+ * Bring up the second i.MX7D core inside the kernel to make the migration
+ * path to mainline kernel easier for the existing iMX7D users.
+ */
+void imx_gpcv2_set_core1_pdn_pup_by_software(bool pdn)
+{
+	u32 reg = pdn ? GPC_CPU_PGC_SW_PDN_REQ : GPC_CPU_PGC_SW_PUP_REQ;
+	u32 val, pup;
+	int ret;
+
+	imx_gpcv2_set_m_core_pgc(true, GPC_PGC_C1);
+	val = readl_relaxed(gpc_base + reg);
+	val |= BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7;
+	writel_relaxed(val, gpc_base + reg);
+
+	ret = readl_relaxed_poll_timeout_atomic(gpc_base + reg, pup,
+				!(pup & BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7),
+				5, 1000000);
+	if (ret < 0) {
+		pr_err("i.MX7D: CORE1_A7 power up timeout\n");
+		val &= ~BM_CPU_PGC_SW_PDN_PUP_REQ_CORE1_A7;
+		writel_relaxed(val, gpc_base + reg);
+	}
+
+	imx_gpcv2_set_m_core_pgc(false, GPC_PGC_C1);
+}
+
 void imx_enable_cpu(int cpu, bool enable)
 {
 	u32 mask, val;

 	cpu = cpu_logical_map(cpu);
-	mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
 	spin_lock(&scr_lock);
-	val = readl_relaxed(src_base + SRC_SCR);
-	val = enable ? val | mask : val & ~mask;
-	val |= 1 << (BP_SRC_SCR_CORE1_RST + cpu - 1);
-	writel_relaxed(val, src_base + SRC_SCR);
+	if (gpr_v2) {
+		if (enable)
+			imx_gpcv2_set_core1_pdn_pup_by_software(false);
+
+		mask = 1 << (BP_SRC_A7RCR1_A7_CORE1_ENABLE + cpu - 1);
+		val = readl_relaxed(src_base + SRC_A7RCR1);
+		val = enable ? val | mask : val & ~mask;
+		writel_relaxed(val, src_base + SRC_A7RCR1);
+	} else {
+		mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
+		val = readl_relaxed(src_base + SRC_SCR);
+		val = enable ? val | mask : val & ~mask;
+		val |= 1 << (BP_SRC_SCR_CORE1_RST + cpu - 1);
+		writel_relaxed(val, src_base + SRC_SCR);
+	}
 	spin_unlock(&scr_lock);
 }

@@ -91,19 +151,19 @@ void imx_set_cpu_jump(int cpu, void *jump_addr)
 {
 	cpu = cpu_logical_map(cpu);
 	writel_relaxed(__pa_symbol(jump_addr),
-		       src_base + SRC_GPR1 + cpu * 8);
+		       src_base + SRC_GPR1(gpr_v2) + cpu * 8);
 }

 u32 imx_get_cpu_arg(int cpu)
 {
 	cpu = cpu_logical_map(cpu);
-	return readl_relaxed(src_base + SRC_GPR1 + cpu * 8 + 4);
+	return readl_relaxed(src_base + SRC_GPR1(gpr_v2) + cpu * 8 + 4);
 }

 void imx_set_cpu_arg(int cpu, u32 arg)
 {
 	cpu = cpu_logical_map(cpu);
-	writel_relaxed(arg, src_base + SRC_GPR1 + cpu * 8 + 4);
+	writel_relaxed(arg, src_base + SRC_GPR1(gpr_v2) + cpu * 8 + 4);
 }

 void __init imx_src_init(void)
@@ -131,3 +191,26 @@ void __init imx_src_init(void)
 	writel_relaxed(val, src_base + SRC_SCR);
 	spin_unlock(&scr_lock);
 }
+
+void __init imx7_src_init(void)
+{
+	struct device_node *np;
+
+	gpr_v2 = true;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx7d-src");
+	if (!np)
+		return;
+
+	src_base = of_iomap(np, 0);
+	if (!src_base)
+		return;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx7d-gpc");
+	if (!np)
+		return;
+
+	gpc_base = of_iomap(np, 0);
+	if (!gpc_base)
+		return;
+}
--- a/arch/arm/mach-imx/suspend-imx53.S
+++ b/arch/arm/mach-imx/suspend-imx53.S
@@ -28,11 +28,11 @@
 *                              ^
 *                              ^
 *                      imx53_suspend code
- *              PM_INFO structure(imx53_suspend_info)
+ *              PM_INFO structure(imx5_cpu_suspend_info)
 * ======================== low address =======================
 */

-/* Offsets of members of struct imx53_suspend_info */
+/* Offsets of members of struct imx5_cpu_suspend_info */
 #define SUSPEND_INFO_MX53_M4IF_V_OFFSET		0x0
 #define SUSPEND_INFO_MX53_IOMUXC_V_OFFSET	0x4
 #define SUSPEND_INFO_MX53_IO_COUNT_OFFSET	0x8

--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -7,7 +7,7 @@ comment "IXP4xx Platforms"

 config MACH_IXP4XX_OF
 	bool
-	prompt "Devce Tree IXP4xx boards"
+	prompt "Device Tree IXP4xx boards"
 	default y
 	select ARM_APPENDED_DTB # Old Redboot bootloaders deployed
 	select I2C
@@ -20,7 +20,7 @@ config MACH_IXP4XX_OF
 config MACH_NSLU2
 	bool
 	prompt "Linksys NSLU2"
-	select FORCE_PCI
+	depends on IXP4XX_PCI_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support Linksys's
 	  NSLU2 NAS device. For more information on this platform,
@@ -28,7 +28,7 @@ config MACH_NSLU2

 config MACH_AVILA
 	bool "Avila"
-	select FORCE_PCI
+	depends on IXP4XX_PCI_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the Gateworks
 	  Avila Network Platform. For more information on this platform,
@@ -44,7 +44,7 @@ config MACH_LOFT

 config ARCH_ADI_COYOTE
 	bool "Coyote"
-	select FORCE_PCI
+	depends on IXP4XX_PCI_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the ADI 
 	  Engineering Coyote Gateway Reference Platform. For more
@@ -52,7 +52,7 @@ config ARCH_ADI_COYOTE

 config MACH_GATEWAY7001
 	bool "Gateway 7001"
-	select FORCE_PCI
+	depends on IXP4XX_PCI_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support Gateway's
 	  7001 Access Point. For more information on this platform,
@@ -60,7 +60,7 @@ config MACH_GATEWAY7001

 config MACH_WG302V2
 	bool "Netgear WG302 v2 / WAG302 v2"
-	select FORCE_PCI
+	depends on IXP4XX_PCI_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support Netgear's
 	  WG302 v2 or WAG302 v2 Access Points. For more information
@@ -68,6 +68,7 @@ config MACH_WG302V2

 config ARCH_IXDP425
 	bool "IXDP425"
+	depends on IXP4XX_PCI_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support Intel's 
 	  IXDP425 Development Platform (Also known as Richfield).  
@@ -75,6 +76,7 @@ config ARCH_IXDP425

 config MACH_IXDPG425
 	bool "IXDPG425"
+	depends on IXP4XX_PCI_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support Intel's
 	  IXDPG425 Development Platform (Also known as Montajade).
@@ -120,7 +122,7 @@ config ARCH_PRPMC1100
 config MACH_NAS100D
 	bool
 	prompt "NAS100D"
-	select FORCE_PCI
+	depends on IXP4XX_PCI_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support Iomega's
 	  NAS 100d device. For more information on this platform,
@@ -129,7 +131,7 @@ config MACH_NAS100D
 config MACH_DSMG600
 	bool
 	prompt "D-Link DSM-G600 RevA"
-	select FORCE_PCI
+	depends on IXP4XX_PCI_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support D-Link's
 	  DSM-G600 RevA device. For more information on this platform,
@@ -143,7 +145,7 @@ config	ARCH_IXDP4XX
 config MACH_FSG
 	bool
 	prompt "Freecom FSG-3"
-	select FORCE_PCI
+	depends on IXP4XX_PCI_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support Freecom's
 	  FSG-3 device. For more information on this platform,
@@ -152,7 +154,7 @@ config MACH_FSG
 config MACH_ARCOM_VULCAN
 	bool
 	prompt "Arcom/Eurotech Vulcan"
-	select FORCE_PCI
+	depends on IXP4XX_PCI_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support Arcom's
 	  Vulcan board.
@@ -173,7 +175,7 @@ config CPU_IXP43X
 config MACH_GTWX5715
 	bool "Gemtek WX5715 (Linksys WRV54G)"
 	depends on ARCH_IXP4XX
-	select FORCE_PCI
+	depends on IXP4XX_PCI_LEGACY
 	help
 		This board is currently inside the Linksys WRV54G Gateways.

@@ -196,7 +198,7 @@ config MACH_DEVIXP

 config MACH_MICCPT
 	bool "Omicron MICCPT"
-	select FORCE_PCI
+	depends on IXP4XX_PCI_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support the MICCPT
 	  board from OMICRON electronics GmbH.
@@ -209,9 +211,16 @@ config MACH_MIC256

 comment "IXP4xx Options"

+config IXP4XX_PCI_LEGACY
+	bool "IXP4xx legacy PCI driver support"
+	depends on PCI
+	help
+	  Selects legacy PCI driver.
+	  Not recommended for new development.
+
 config IXP4XX_INDIRECT_PCI
 	bool "Use indirect PCI memory access"
-	depends on PCI
+	depends on IXP4XX_PCI_LEGACY
 	help
          IXP4xx provides two methods of accessing PCI memory space:


--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -19,6 +19,7 @@
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
 #include <linux/gpio/machine.h>
+#include <linux/platform_data/pata_ixp4xx_cf.h>
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>

--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -27,12 +27,12 @@
 #include <linux/cpu.h>
 #include <linux/pci.h>
 #include <linux/sched_clock.h>
+#include <linux/soc/ixp4xx/cpu.h>
 #include <linux/irqchip/irq-ixp4xx.h>
 #include <linux/platform_data/timer-ixp4xx.h>
 #include <linux/dma-map-ops.h>
 #include <mach/udc.h>
 #include <mach/hardware.h>
-#include <mach/io.h>
 #include <linux/uaccess.h>
 #include <asm/page.h>
 #include <asm/exception.h>
@@ -44,6 +44,27 @@

 #include "irqs.h"

+u32 ixp4xx_read_feature_bits(void)
+{
+	u32 val = ~__raw_readl(IXP4XX_EXP_CFG2);
+
+	if (cpu_is_ixp42x_rev_a0())
+		return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP |
+					       IXP4XX_FEATURE_AES);
+	if (cpu_is_ixp42x())
+		return val & IXP42X_FEATURE_MASK;
+	if (cpu_is_ixp43x())
+		return val & IXP43X_FEATURE_MASK;
+	return val & IXP46X_FEATURE_MASK;
+}
+EXPORT_SYMBOL(ixp4xx_read_feature_bits);
+
+void ixp4xx_write_feature_bits(u32 value)
+{
+	__raw_writel(~value, IXP4XX_EXP_CFG2);
+}
+EXPORT_SYMBOL(ixp4xx_write_feature_bits);
+
 #define IXP4XX_TIMER_FREQ 66666000

 /*************************************************************************
@@ -215,6 +236,27 @@ static struct resource ixp46x_i2c_resources[] = {
 	}
 };

+/* A single 32-bit register on IXP46x */
+#define IXP4XX_HWRANDOM_BASE_PHYS	0x70002100
+
+static struct resource ixp46x_hwrandom_resource[] = {
+	{
+		.start = IXP4XX_HWRANDOM_BASE_PHYS,
+		.end = IXP4XX_HWRANDOM_BASE_PHYS + 0x3,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ixp46x_hwrandom_device = {
+	.name           = "ixp4xx-hwrandom",
+	.id             = -1,
+	.dev = {
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
+	},
+	.resource = ixp46x_hwrandom_resource,
+	.num_resources  = ARRAY_SIZE(ixp46x_hwrandom_resource),
+};
+
 /*
 * I2C controller. The IXP46x uses the same block as the IOP3xx, so
 * we just use the same device name.
@@ -227,7 +269,8 @@ static struct platform_device ixp46x_i2c_controller = {
 };

 static struct platform_device *ixp46x_devices[] __initdata = {
-	&ixp46x_i2c_controller
+	&ixp46x_hwrandom_device,
+	&ixp46x_i2c_controller,
 };

 unsigned long ixp4xx_exp_bus_size;

--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -28,6 +28,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
+#include <mach/hardware.h>

 #include "irqs.h"


--- a/arch/arm/mach-ixp4xx/include/mach/hardware.h
+++ b/arch/arm/mach-ixp4xx/include/mach/hardware.h
@@ -23,7 +23,7 @@
 #include "ixp4xx-regs.h"

 #ifndef __ASSEMBLER__
-#include <mach/cpu.h>
+#include <linux/soc/ixp4xx/cpu.h>
 #endif

 /* Platform helper functions and definitions */

--- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
+++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
@@ -45,21 +45,21 @@
 * it can be used with the low-level debug code.
 */
 #define IXP4XX_PERIPHERAL_BASE_PHYS	0xC8000000
-#define IXP4XX_PERIPHERAL_BASE_VIRT	IOMEM(0xFEF00000)
+#define IXP4XX_PERIPHERAL_BASE_VIRT	IOMEM(0xFEC00000)
 #define IXP4XX_PERIPHERAL_REGION_SIZE	0x00013000

 /*
 * PCI Config registers
 */
 #define IXP4XX_PCI_CFG_BASE_PHYS	0xC0000000
-#define IXP4XX_PCI_CFG_BASE_VIRT	IOMEM(0xFEF13000)
+#define IXP4XX_PCI_CFG_BASE_VIRT	IOMEM(0xFEC13000)
 #define IXP4XX_PCI_CFG_REGION_SIZE	0x00001000

 /*
 * Expansion BUS Configuration registers
 */
 #define IXP4XX_EXP_CFG_BASE_PHYS	0xC4000000
-#define IXP4XX_EXP_CFG_BASE_VIRT	0xFEF14000
+#define IXP4XX_EXP_CFG_BASE_VIRT	0xFEC14000
 #define IXP4XX_EXP_CFG_REGION_SIZE	0x00001000

 #define IXP4XX_EXP_CS0_OFFSET	0x00
@@ -120,6 +120,7 @@
 #define IXP4XX_SSP_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x12000)


+/* The UART is explicitly put in the beginning of fixmap */
 #define IXP4XX_UART1_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x0000)
 #define IXP4XX_UART2_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x1000)
 #define IXP4XX_PMU_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x2000)
@@ -299,58 +300,4 @@

 #define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */

-/* "fuse" bits of IXP_EXP_CFG2 */
-/* All IXP4xx CPUs */
-#define IXP4XX_FEATURE_RCOMP		(1 << 0)
-#define IXP4XX_FEATURE_USB_DEVICE	(1 << 1)
-#define IXP4XX_FEATURE_HASH		(1 << 2)
-#define IXP4XX_FEATURE_AES		(1 << 3)
-#define IXP4XX_FEATURE_DES		(1 << 4)
-#define IXP4XX_FEATURE_HDLC		(1 << 5)
-#define IXP4XX_FEATURE_AAL		(1 << 6)
-#define IXP4XX_FEATURE_HSS		(1 << 7)
-#define IXP4XX_FEATURE_UTOPIA		(1 << 8)
-#define IXP4XX_FEATURE_NPEB_ETH0	(1 << 9)
-#define IXP4XX_FEATURE_NPEC_ETH		(1 << 10)
-#define IXP4XX_FEATURE_RESET_NPEA	(1 << 11)
-#define IXP4XX_FEATURE_RESET_NPEB	(1 << 12)
-#define IXP4XX_FEATURE_RESET_NPEC	(1 << 13)
-#define IXP4XX_FEATURE_PCI		(1 << 14)
-#define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT	(3 << 16)
-#define IXP4XX_FEATURE_XSCALE_MAX_FREQ	(3 << 22)
-#define IXP42X_FEATURE_MASK		(IXP4XX_FEATURE_RCOMP            | \
-					 IXP4XX_FEATURE_USB_DEVICE       | \
-					 IXP4XX_FEATURE_HASH             | \
-					 IXP4XX_FEATURE_AES              | \
-					 IXP4XX_FEATURE_DES              | \
-					 IXP4XX_FEATURE_HDLC             | \
-					 IXP4XX_FEATURE_AAL              | \
-					 IXP4XX_FEATURE_HSS              | \
-					 IXP4XX_FEATURE_UTOPIA           | \
-					 IXP4XX_FEATURE_NPEB_ETH0        | \
-					 IXP4XX_FEATURE_NPEC_ETH         | \
-					 IXP4XX_FEATURE_RESET_NPEA       | \
-					 IXP4XX_FEATURE_RESET_NPEB       | \
-					 IXP4XX_FEATURE_RESET_NPEC       | \
-					 IXP4XX_FEATURE_PCI              | \
-					 IXP4XX_FEATURE_UTOPIA_PHY_LIMIT | \
-					 IXP4XX_FEATURE_XSCALE_MAX_FREQ)
-
-
-/* IXP43x/46x CPUs */
-#define IXP4XX_FEATURE_ECC_TIMESYNC	(1 << 15)
-#define IXP4XX_FEATURE_USB_HOST		(1 << 18)
-#define IXP4XX_FEATURE_NPEA_ETH		(1 << 19)
-#define IXP43X_FEATURE_MASK		(IXP42X_FEATURE_MASK             | \
-					 IXP4XX_FEATURE_ECC_TIMESYNC     | \
-					 IXP4XX_FEATURE_USB_HOST         | \
-					 IXP4XX_FEATURE_NPEA_ETH)
-
-/* IXP46x CPU (including IXP455) only */
-#define IXP4XX_FEATURE_NPEB_ETH_1_TO_3	(1 << 20)
-#define IXP4XX_FEATURE_RSA		(1 << 21)
-#define IXP46X_FEATURE_MASK		(IXP43X_FEATURE_MASK             | \
-					 IXP4XX_FEATURE_NPEB_ETH_1_TO_3  | \
-					 IXP4XX_FEATURE_RSA)
-
 #endif
--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
@@ -79,20 +79,6 @@ extern unsigned long ixp4xx_exp_bus_size;
 #define IXP4XX_PERIPHERAL_BUS_CLOCK 	(66) /* 66MHzi APB BUS   */ 
 #define IXP4XX_UART_XTAL        	14745600

-/*
- * This structure provide a means for the board setup code
- * to give information to th pata_ixp4xx driver. It is
- * passed as platform_data.
- */
-struct ixp4xx_pata_data {
-	volatile u32	*cs0_cfg;
-	volatile u32	*cs1_cfg;
-	unsigned long	cs0_bits;
-	unsigned long	cs1_bits;
-	void __iomem	*cs0;
-	void __iomem	*cs1;
-};
-
 /*
 * Frequency of clock used for primary clocksource
 */

--- a/arch/arm/mach-ixp4xx/ixp4xx-of.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx-of.c
@@ -9,8 +9,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

-#include <mach/hardware.h>
-#include <mach/ixp4xx-regs.h>
+/*
+ * These are the only fixed phys to virt mappings we ever need
+ * we put it right after the UART mapping at 0xffc80000-0xffc81fff
+ */
+#define IXP4XX_EXP_CFG_BASE_PHYS	0xC4000000
+#define IXP4XX_EXP_CFG_BASE_VIRT	0xFEC14000

 static struct map_desc ixp4xx_of_io_desc[] __initdata = {
 	/*

--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -33,6 +33,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
+#include <mach/hardware.h>

 #include "irqs.h"


--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -31,6 +31,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/time.h>
+#include <mach/hardware.h>

 #include "irqs.h"


--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -65,14 +65,14 @@ config MACH_OMAP_INNOVATOR
 config MACH_OMAP_H2
 	bool "TI H2 Support"
 	depends on ARCH_OMAP16XX
-    	help
+	help
 	  TI OMAP 1610/1611B H2 board support. Say Y here if you have such
 	  a board.

 config MACH_OMAP_H3
 	bool "TI H3 Support"
 	depends on ARCH_OMAP16XX
-    	help
+	help
 	  TI OMAP 1710 H3 board support. Say Y here if you have such
 	  a board.

@@ -85,14 +85,14 @@ config MACH_HERALD
 config MACH_OMAP_OSK
 	bool "TI OSK Support"
 	depends on ARCH_OMAP16XX
-    	help
+	help
 	  TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
          if you have such a board.

 config OMAP_OSK_MISTRAL
 	bool "Mistral QVGA board Support"
 	depends on MACH_OMAP_OSK
-    	help
+	help
 	  The OSK supports an optional add-on board with a Quarter-VGA
 	  touchscreen, PDA-ish buttons, a resume button, bicolor LED,
 	  and camera connector.  Say Y here if you have this board.
@@ -100,14 +100,14 @@ config OMAP_OSK_MISTRAL
 config MACH_OMAP_PERSEUS2
 	bool "TI Perseus2"
 	depends on ARCH_OMAP730
-    	help
+	help
 	  Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
 	  a board.

 config MACH_OMAP_FSAMPLE
 	bool "TI F-Sample"
 	depends on ARCH_OMAP730
-    	help
+	help
 	  Support for TI OMAP 850 F-Sample board. Say Y here if you have such
 	  a board.


--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -26,7 +26,6 @@

 extern struct omap_domain_base cm_base;
 extern struct omap_domain_base cm2_base;
-extern void omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2);
 # endif

 /*

--- a/arch/arm/mach-omap2/cm_common.c
+++ b/arch/arm/mach-omap2/cm_common.c
@@ -37,19 +37,6 @@ struct omap_domain_base cm2_base;
 #define CM_NO_CLOCKS		0x1
 #define CM_SINGLE_INSTANCE	0x2

-/**
- * omap2_set_globals_cm - set the CM/CM2 base addresses (for early use)
- * @cm: CM base virtual address
- * @cm2: CM2 base virtual address (if present on the booted SoC)
- *
- * XXX Will be replaced when the PRM/CM drivers are completed.
- */
-void __init omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2)
-{
-	cm_base.va = cm;
-	cm2_base.va = cm2;
-}
-
 /**
 * cm_split_idlest_reg - split CM_IDLEST reg addr into its components
 * @idlest_reg: CM_IDLEST* virtual address

--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -130,7 +130,6 @@ void am33xx_init_early(void);
 void am35xx_init_early(void);
 void ti814x_init_early(void);
 void ti816x_init_early(void);
-void am33xx_init_early(void);
 void am43xx_init_early(void);
 void am43xx_init_late(void);
 void omap4430_init_early(void);

--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -136,11 +136,6 @@ struct omap3_control_regs {
 static struct omap3_control_regs control_context;
 #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */

-void __init omap2_set_globals_control(void __iomem *ctrl)
-{
-	omap2_ctrl_base = ctrl;
-}
-
 u8 omap_ctrl_readb(u16 offset)
 {
 	u32 val;

--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -528,7 +528,6 @@ extern int omap3_ctrl_save_padconf(void);
 void omap3_ctrl_init(void);
 int omap2_control_base_init(void);
 int omap_control_init(void);
-void omap2_set_globals_control(void __iomem *ctrl);
 void __init omap3_control_legacy_iomap_init(void);
 #else
 #define omap_ctrl_readb(x)		0

--- a/arch/arm/mach-omap2/pm33xx-core.c
+++ b/arch/arm/mach-omap2/pm33xx-core.c
@@ -8,6 +8,7 @@

 #include <linux/cpuidle.h>
 #include <linux/platform_data/pm33xx.h>
+#include <linux/suspend.h>
 #include <asm/cpuidle.h>
 #include <asm/smp_scu.h>
 #include <asm/suspend.h>
@@ -324,6 +325,44 @@ static struct am33xx_pm_platform_data *am33xx_pm_get_pdata(void)
 		return NULL;
 }

+#ifdef CONFIG_SUSPEND
+/*
+ * Block system suspend initially. Later on pm33xx sets up it's own
+ * platform_suspend_ops after probe. That depends also on loaded
+ * wkup_m3_ipc and booted am335x-pm-firmware.elf.
+ */
+static int amx3_suspend_block(suspend_state_t state)
+{
+	pr_warn("PM not initialized for pm33xx, wkup_m3_ipc, or am335x-pm-firmware.elf\n");
+
+	return -EINVAL;
+}
+
+static int amx3_pm_valid(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+static const struct platform_suspend_ops amx3_blocked_pm_ops = {
+	.begin = amx3_suspend_block,
+	.valid = amx3_pm_valid,
+};
+
+static void __init amx3_block_suspend(void)
+{
+	suspend_set_ops(&amx3_blocked_pm_ops);
+}
+#else
+static inline void amx3_block_suspend(void)
+{
+}
+#endif	/* CONFIG_SUSPEND */
+
 int __init amx3_common_pm_init(void)
 {
 	struct am33xx_pm_platform_data *pdata;
@@ -337,6 +376,7 @@ int __init amx3_common_pm_init(void)
 	devinfo.size_data = sizeof(*pdata);
 	devinfo.id = -1;
 	platform_device_register_full(&devinfo);
+	amx3_block_suspend();

 	return 0;
 }

--- a/arch/arm/mach-s3c/mach-rx1950.c
+++ b/arch/arm/mach-s3c/mach-rx1950.c
@@ -271,7 +271,6 @@ static int rx1950_led_blink_set(struct gpio_desc *desc, int state,
 		break;
 	default:
 		return -EINVAL;
-		break;
 	}

 	if (delay_on && delay_off && !*delay_on && !*delay_off)

--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -16,6 +16,7 @@ config ARCH_SUNXI
 	select IRQ_FASTEOI_HIERARCHY_HANDLERS
 	select PINCTRL
 	select RESET_CONTROLLER
+	select SUN4I_TIMER
 	help
 	  This enables support for Allwinner sunxi based SoCs like the A64.


--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -79,7 +79,7 @@ &ehci1 {
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii_pins>;
-	phy-mode = "rgmii-id";
+	phy-mode = "rgmii-txid";
 	phy-handle = <&ext_rgmii_phy>;
 	phy-supply = <&reg_dc1sw>;
 	status = "okay";

--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -227,7 +227,7 @@ pcie0: pcie@f8000000 {
 		       <&pcie_phy 2>, <&pcie_phy 3>;
 		phy-names = "pcie-phy-0", "pcie-phy-1",
 			    "pcie-phy-2", "pcie-phy-3";
-		ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000>,
+		ranges = <0x82000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000>,
 			 <0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>;
 		resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
 			 <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,

--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -1058,7 +1058,7 @@ config PATA_ISAPNP

 config PATA_IXP4XX_CF
 	tristate "IXP4XX Compact Flash support"
-	depends on ARCH_IXP4XX
+	depends on ARCH_IXP4XX || COMPILE_TEST
 	help
 	  This option enables support for a Compact Flash connected on
 	  the ixp4xx expansion bus. This driver had been written for

--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -17,6 +17,7 @@
 #include <linux/libata.h>
 #include <linux/irq.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/pata_ixp4xx_cf.h>
 #include <scsi/scsi_host.h>

 #define DRV_NAME	"pata_ixp4xx_cf"

--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -152,7 +152,7 @@ config HW_RANDOM_VIA

 config HW_RANDOM_IXP4XX
 	tristate "Intel IXP4xx NPU HW Pseudo-Random Number Generator support"
-	depends on ARCH_IXP4XX
+	depends on ARCH_IXP4XX || COMPILE_TEST
 	default HW_RANDOM
 	help
 	  This driver provides kernel-side support for the Pseudo-Random

--- a/drivers/char/hw_random/ixp4xx-rng.c
+++ b/drivers/char/hw_random/ixp4xx-rng.c
+// SPDX-License-Identifier: GPL-2.0
 /*
 * drivers/char/hw_random/ixp4xx-rng.c
 *
@@ -8,23 +9,20 @@
 * Copyright 2005 (c) MontaVista Software, Inc.
 *
 * Fixes by Michael Buesch
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
 */

 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
+#include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/bitops.h>
 #include <linux/hw_random.h>
+#include <linux/of.h>
+#include <linux/soc/ixp4xx/cpu.h>

 #include <asm/io.h>
-#include <mach/hardware.h>
-

 static int ixp4xx_rng_data_read(struct hwrng *rng, u32 *buffer)
 {
@@ -40,35 +38,40 @@ static struct hwrng ixp4xx_rng_ops = {
 	.data_read	= ixp4xx_rng_data_read,
 };

-static int __init ixp4xx_rng_init(void)
+static int ixp4xx_rng_probe(struct platform_device *pdev)
 {
 	void __iomem * rng_base;
-	int err;
+	struct device *dev = &pdev->dev;
+	struct resource *res;

 	if (!cpu_is_ixp46x()) /* includes IXP455 */
 		return -ENOSYS;

-	rng_base = ioremap(0x70002100, 4);
-	if (!rng_base)
-		return -ENOMEM;
-	ixp4xx_rng_ops.priv = (unsigned long)rng_base;
-	err = hwrng_register(&ixp4xx_rng_ops);
-	if (err)
-		iounmap(rng_base);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	rng_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(rng_base))
+		return PTR_ERR(rng_base);

-	return err;
+	ixp4xx_rng_ops.priv = (unsigned long)rng_base;
+	return devm_hwrng_register(dev, &ixp4xx_rng_ops);
 }

-static void __exit ixp4xx_rng_exit(void)
-{
-	void __iomem * rng_base = (void __iomem *)ixp4xx_rng_ops.priv;
-
-	hwrng_unregister(&ixp4xx_rng_ops);
-	iounmap(rng_base);
-}
+static const struct of_device_id ixp4xx_rng_of_match[] = {
+	{
+		.compatible = "intel,ixp46x-rng",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, ixp4xx_rng_of_match);

-module_init(ixp4xx_rng_init);
-module_exit(ixp4xx_rng_exit);
+static struct platform_driver ixp4xx_rng_driver = {
+	.driver = {
+		.name = "ixp4xx-hwrandom",
+		.of_match_table = ixp4xx_rng_of_match,
+	},
+	.probe = ixp4xx_rng_probe,
+};
+module_platform_driver(ixp4xx_rng_driver);

 MODULE_AUTHOR("Deepak Saxena <dsaxena@plexity.net>");
 MODULE_DESCRIPTION("H/W Pseudo-Random Number Generator (RNG) driver for IXP45x/46x");

--- a/drivers/crypto/ixp4xx_crypto.c
+++ b/drivers/crypto/ixp4xx_crypto.c
@@ -31,6 +31,10 @@
 #include <linux/soc/ixp4xx/npe.h>
 #include <linux/soc/ixp4xx/qmgr.h>

+/* Intermittent includes, delete this after v5.14-rc1 */
+#include <linux/soc/ixp4xx/cpu.h>
+#include <mach/ixp4xx-regs.h>
+
 #define MAX_KEYLEN 32

 /* hash: cfgword + 2 * digestlen; crypt: keylen + cfgword */

--- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
@@ -37,6 +37,8 @@
 #include <linux/module.h>
 #include <linux/soc/ixp4xx/npe.h>
 #include <linux/soc/ixp4xx/qmgr.h>
+#include <mach/hardware.h>
+#include <linux/soc/ixp4xx/cpu.h>

 #include "ixp46x_ts.h"


--- a/drivers/net/ethernet/xscale/ptp_ixp46x.c
+++ b/drivers/net/ethernet/xscale/ptp_ixp46x.c
@@ -12,9 +12,8 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
-
 #include <linux/ptp_clock_kernel.h>
+#include <linux/soc/ixp4xx/cpu.h>

 #include "ixp46x_ts.h"


--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -22,6 +22,7 @@
 #include <linux/slab.h>
 #include <linux/soc/ixp4xx/npe.h>
 #include <linux/soc/ixp4xx/qmgr.h>
+#include <linux/soc/ixp4xx/cpu.h>

 #define DEBUG_DESC		0
 #define DEBUG_RX		0

--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -37,6 +37,14 @@ config PCI_FTPCI100
 	depends on OF
 	default ARCH_GEMINI

+config PCI_IXP4XX
+	bool "Intel IXP4xx PCI controller"
+	depends on ARM && OF
+	default ARCH_IXP4XX
+	help
+	  Say Y here if you want support for the PCI host controller found
+	  in the Intel IXP4xx XScale-based network processor SoC.
+
 config PCI_TEGRA
 	bool "NVIDIA Tegra PCIe controller"
 	depends on ARCH_TEGRA || COMPILE_TEST

--- a/drivers/pci/controller/Makefile
+++ b/drivers/pci/controller/Makefile
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_PCIE_CADENCE) += cadence/
 obj-$(CONFIG_PCI_FTPCI100) += pci-ftpci100.o
+obj-$(CONFIG_PCI_IXP4XX) += pci-ixp4xx.o
 obj-$(CONFIG_PCI_HYPERV) += pci-hyperv.o
 obj-$(CONFIG_PCI_HYPERV_INTERFACE) += pci-hyperv-intf.o
 obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o

--- a/drivers/pci/controller/pci-ixp4xx.c
+++ b/drivers/pci/controller/pci-ixp4xx.c
--- a/drivers/soc/imx/soc-imx.c
+++ b/drivers/soc/imx/soc-imx.c
@@ -70,6 +70,9 @@ static int __init imx_soc_device_init(void)
 	case MXC_CPU_MX35:
 		soc_id = "i.MX35";
 		break;
+	case MXC_CPU_MX50:
+		soc_id = "i.MX50";
+		break;
 	case MXC_CPU_MX51:
 		ocotp_compat = "fsl,imx51-iim";
 		soc_id = "i.MX51";

--- a/drivers/soc/ixp4xx/ixp4xx-npe.c
+++ b/drivers/soc/ixp4xx/ixp4xx-npe.c
@@ -21,6 +21,8 @@
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/soc/ixp4xx/npe.h>
+#include <mach/hardware.h>
+#include <linux/soc/ixp4xx/cpu.h>

 #define DEBUG_MSG			0
 #define DEBUG_FW			0

--- a/drivers/soc/ixp4xx/ixp4xx-qmgr.c
+++ b/drivers/soc/ixp4xx/ixp4xx-qmgr.c
@@ -12,6 +12,8 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/soc/ixp4xx/qmgr.h>
+#include <mach/hardware.h>
+#include <linux/soc/ixp4xx/cpu.h>

 static struct qmgr_regs __iomem *qmgr_regs;
 static int qmgr_irq_1;

--- a/drivers/soc/tegra/Kconfig
+++ b/drivers/soc/tegra/Kconfig
@@ -144,6 +144,8 @@ config SOC_TEGRA_FLOWCTRL
 config SOC_TEGRA_PMC
 	bool
 	select GENERIC_PINCONF
+	select PM_OPP
+	select PM_GENERIC_DOMAINS

 config SOC_TEGRA_POWERGATE_BPMP
 	def_bool y

--- a/drivers/soc/tegra/common.c
+++ b/drivers/soc/tegra/common.c
@@ -3,9 +3,16 @@
 * Copyright (C) 2014 NVIDIA CORPORATION.  All rights reserved.
 */

+#define dev_fmt(fmt)	"tegra-soc: " fmt
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/export.h>
 #include <linux/of.h>
+#include <linux/pm_opp.h>

 #include <soc/tegra/common.h>
+#include <soc/tegra/fuse.h>

 static const struct of_device_id tegra_machine_match[] = {
 	{ .compatible = "nvidia,tegra20", },
@@ -31,3 +38,93 @@ bool soc_is_tegra(void)

 	return match != NULL;
 }
+
+static int tegra_core_dev_init_opp_state(struct device *dev)
+{
+	unsigned long rate;
+	struct clk *clk;
+	int err;
+
+	clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(dev, "failed to get clk: %pe\n", clk);
+		return PTR_ERR(clk);
+	}
+
+	rate = clk_get_rate(clk);
+	if (!rate) {
+		dev_err(dev, "failed to get clk rate\n");
+		return -EINVAL;
+	}
+
+	/* first dummy rate-setting initializes voltage vote */
+	err = dev_pm_opp_set_rate(dev, rate);
+	if (err) {
+		dev_err(dev, "failed to initialize OPP clock: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+/**
+ * devm_tegra_core_dev_init_opp_table() - initialize OPP table
+ * @dev: device for which OPP table is initialized
+ * @params: pointer to the OPP table configuration
+ *
+ * This function will initialize OPP table and sync OPP state of a Tegra SoC
+ * core device.
+ *
+ * Return: 0 on success or errorno.
+ */
+int devm_tegra_core_dev_init_opp_table(struct device *dev,
+				       struct tegra_core_opp_params *params)
+{
+	u32 hw_version;
+	int err;
+
+	err = devm_pm_opp_set_clkname(dev, NULL);
+	if (err) {
+		dev_err(dev, "failed to set OPP clk: %d\n", err);
+		return err;
+	}
+
+	/* Tegra114+ doesn't support OPP yet */
+	if (!of_machine_is_compatible("nvidia,tegra20") &&
+	    !of_machine_is_compatible("nvidia,tegra30"))
+		return -ENODEV;
+
+	if (of_machine_is_compatible("nvidia,tegra20"))
+		hw_version = BIT(tegra_sku_info.soc_process_id);
+	else
+		hw_version = BIT(tegra_sku_info.soc_speedo_id);
+
+	err = devm_pm_opp_set_supported_hw(dev, &hw_version, 1);
+	if (err) {
+		dev_err(dev, "failed to set OPP supported HW: %d\n", err);
+		return err;
+	}
+
+	/*
+	 * Older device-trees have an empty OPP table, we will get
+	 * -ENODEV from devm_pm_opp_of_add_table() in this case.
+	 */
+	err = devm_pm_opp_of_add_table(dev);
+	if (err) {
+		if (err == -ENODEV)
+			dev_err_once(dev, "OPP table not found, please update device-tree\n");
+		else
+			dev_err(dev, "failed to add OPP table: %d\n", err);
+
+		return err;
+	}
+
+	if (params->init_state) {
+		err = tegra_core_dev_init_opp_state(dev);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(devm_tegra_core_dev_init_opp_table);
--- a/drivers/soc/tegra/fuse/fuse-tegra.c
+++ b/drivers/soc/tegra/fuse/fuse-tegra.c
@@ -489,10 +489,8 @@ static int __init tegra_init_fuse(void)
 		size_t size = sizeof(*fuse->lookups) * fuse->soc->num_lookups;

 		fuse->lookups = kmemdup(fuse->soc->lookups, size, GFP_KERNEL);
-		if (!fuse->lookups)
-			return -ENOMEM;
-
-		nvmem_add_cell_lookups(fuse->lookups, fuse->soc->num_lookups);
+		if (fuse->lookups)
+			nvmem_add_cell_lookups(fuse->lookups, fuse->soc->num_lookups);
 	}

 	return 0;

--- a/drivers/soc/tegra/fuse/fuse-tegra30.c
+++ b/drivers/soc/tegra/fuse/fuse-tegra30.c
@@ -37,7 +37,8 @@
    defined(CONFIG_ARCH_TEGRA_132_SOC) || \
    defined(CONFIG_ARCH_TEGRA_210_SOC) || \
    defined(CONFIG_ARCH_TEGRA_186_SOC) || \
-    defined(CONFIG_ARCH_TEGRA_194_SOC)
+    defined(CONFIG_ARCH_TEGRA_194_SOC) || \
+    defined(CONFIG_ARCH_TEGRA_234_SOC)
 static u32 tegra30_fuse_read_early(struct tegra_fuse *fuse, unsigned int offset)
 {
 	if (WARN_ON(!fuse->base))

--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -38,6 +38,7 @@
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
+#include <linux/pm_opp.h>
 #include <linux/reboot.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
@@ -428,6 +429,9 @@ struct tegra_pmc {
 	struct irq_chip irq;

 	struct notifier_block clk_nb;
+
+	bool core_domain_state_synced;
+	bool core_domain_registered;
 };

 static struct tegra_pmc *pmc = &(struct tegra_pmc) {
@@ -1297,12 +1301,107 @@ static int tegra_powergate_add(struct tegra_pmc *pmc, struct device_node *np)
 	return err;
 }

+bool tegra_pmc_core_domain_state_synced(void)
+{
+	return pmc->core_domain_state_synced;
+}
+
+static int
+tegra_pmc_core_pd_set_performance_state(struct generic_pm_domain *genpd,
+					unsigned int level)
+{
+	struct dev_pm_opp *opp;
+	int err;
+
+	opp = dev_pm_opp_find_level_ceil(&genpd->dev, &level);
+	if (IS_ERR(opp)) {
+		dev_err(&genpd->dev, "failed to find OPP for level %u: %pe\n",
+			level, opp);
+		return PTR_ERR(opp);
+	}
+
+	mutex_lock(&pmc->powergates_lock);
+	err = dev_pm_opp_set_opp(pmc->dev, opp);
+	mutex_unlock(&pmc->powergates_lock);
+
+	dev_pm_opp_put(opp);
+
+	if (err) {
+		dev_err(&genpd->dev, "failed to set voltage to %duV: %d\n",
+			level, err);
+		return err;
+	}
+
+	return 0;
+}
+
+static unsigned int
+tegra_pmc_core_pd_opp_to_performance_state(struct generic_pm_domain *genpd,
+					   struct dev_pm_opp *opp)
+{
+	return dev_pm_opp_get_level(opp);
+}
+
+static int tegra_pmc_core_pd_add(struct tegra_pmc *pmc, struct device_node *np)
+{
+	struct generic_pm_domain *genpd;
+	const char *rname = "core";
+	int err;
+
+	genpd = devm_kzalloc(pmc->dev, sizeof(*genpd), GFP_KERNEL);
+	if (!genpd)
+		return -ENOMEM;
+
+	genpd->name = np->name;
+	genpd->set_performance_state = tegra_pmc_core_pd_set_performance_state;
+	genpd->opp_to_performance_state = tegra_pmc_core_pd_opp_to_performance_state;
+
+	err = devm_pm_opp_set_regulators(pmc->dev, &rname, 1);
+	if (err)
+		return dev_err_probe(pmc->dev, err,
+				     "failed to set core OPP regulator\n");
+
+	err = pm_genpd_init(genpd, NULL, false);
+	if (err) {
+		dev_err(pmc->dev, "failed to init core genpd: %d\n", err);
+		return err;
+	}
+
+	err = of_genpd_add_provider_simple(np, genpd);
+	if (err) {
+		dev_err(pmc->dev, "failed to add core genpd: %d\n", err);
+		goto remove_genpd;
+	}
+
+	pmc->core_domain_registered = true;
+
+	return 0;
+
+remove_genpd:
+	pm_genpd_remove(genpd);
+
+	return err;
+}
+
 static int tegra_powergate_init(struct tegra_pmc *pmc,
 				struct device_node *parent)
 {
+	struct of_phandle_args child_args, parent_args;
 	struct device_node *np, *child;
 	int err = 0;

+	/*
+	 * Core power domain is the parent of powergate domains, hence it
+	 * should be registered first.
+	 */
+	np = of_get_child_by_name(parent, "core-domain");
+	if (np) {
+		err = tegra_pmc_core_pd_add(pmc, np);
+		of_node_put(np);
+		if (err)
+			return err;
+	}
+
 	np = of_get_child_by_name(parent, "powergates");
 	if (!np)
 		return 0;
@@ -1313,6 +1412,21 @@ static int tegra_powergate_init(struct tegra_pmc *pmc,
 			of_node_put(child);
 			break;
 		}
+
+		if (of_parse_phandle_with_args(child, "power-domains",
+					       "#power-domain-cells",
+					       0, &parent_args))
+			continue;
+
+		child_args.np = child;
+		child_args.args_count = 0;
+
+		err = of_genpd_add_subdomain(&parent_args, &child_args);
+		of_node_put(parent_args.np);
+		if (err) {
+			of_node_put(child);
+			break;
+		}
 	}

 	of_node_put(np);
@@ -1356,6 +1470,12 @@ static void tegra_powergate_remove_all(struct device_node *parent)
 	}

 	of_node_put(np);
+
+	np = of_get_child_by_name(parent, "core-domain");
+	if (np) {
+		of_genpd_del_provider(np);
+		of_genpd_remove_last(np);
+	}
 }

 static const struct tegra_io_pad_soc *
@@ -3667,6 +3787,29 @@ static const struct of_device_id tegra_pmc_match[] = {
 	{ }
 };

+static void tegra_pmc_sync_state(struct device *dev)
+{
+	int err;
+
+	/*
+	 * Older device-trees don't have core PD, and thus, there are
+	 * no dependencies that will block the state syncing. We shouldn't
+	 * mark the domain as synced in this case.
+	 */
+	if (!pmc->core_domain_registered)
+		return;
+
+	pmc->core_domain_state_synced = true;
+
+	/* this is a no-op if core regulator isn't used */
+	mutex_lock(&pmc->powergates_lock);
+	err = dev_pm_opp_sync_regulators(dev);
+	mutex_unlock(&pmc->powergates_lock);
+
+	if (err)
+		dev_err(dev, "failed to sync regulators: %d\n", err);
+}
+
 static struct platform_driver tegra_pmc_driver = {
 	.driver = {
 		.name = "tegra-pmc",
@@ -3675,6 +3818,7 @@ static struct platform_driver tegra_pmc_driver = {
 #if defined(CONFIG_PM_SLEEP) && defined(CONFIG_ARM)
 		.pm = &tegra_pmc_pm_ops,
 #endif
+		.sync_state = tegra_pmc_sync_state,
 	},
 	.probe = tegra_pmc_probe,
 };

--- a/drivers/soc/tegra/regulators-tegra20.c
+++ b/drivers/soc/tegra/regulators-tegra20.c
@@ -12,16 +12,22 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/of.h>
+#include <linux/reboot.h>
 #include <linux/regulator/coupler.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>

+#include <soc/tegra/pmc.h>
+
 struct tegra_regulator_coupler {
 	struct regulator_coupler coupler;
 	struct regulator_dev *core_rdev;
 	struct regulator_dev *cpu_rdev;
 	struct regulator_dev *rtc_rdev;
-	int core_min_uV;
+	struct notifier_block reboot_notifier;
+	int core_min_uV, cpu_min_uV;
+	bool sys_reboot_mode_req;
+	bool sys_reboot_mode;
 };

 static inline struct tegra_regulator_coupler *
@@ -38,6 +44,21 @@ static int tegra20_core_limit(struct tegra_regulator_coupler *tegra,
 	int core_cur_uV;
 	int err;

+	/*
+	 * Tegra20 SoC has critical DVFS-capable devices that are
+	 * permanently-active or active at a boot time, like EMC
+	 * (DRAM controller) or Display controller for example.
+	 *
+	 * The voltage of a CORE SoC power domain shall not be dropped below
+	 * a minimum level, which is determined by device's clock rate.
+	 * This means that we can't fully allow CORE voltage scaling until
+	 * the state of all DVFS-critical CORE devices is synced.
+	 */
+	if (tegra_pmc_core_domain_state_synced() && !tegra->sys_reboot_mode) {
+		pr_info_once("voltage state synced\n");
+		return 0;
+	}
+
 	if (tegra->core_min_uV > 0)
 		return tegra->core_min_uV;

@@ -58,7 +79,7 @@ static int tegra20_core_limit(struct tegra_regulator_coupler *tegra,
 	 */
 	tegra->core_min_uV = core_max_uV;

-	pr_info("core minimum voltage limited to %duV\n", tegra->core_min_uV);
+	pr_info("core voltage initialized to %duV\n", tegra->core_min_uV);

 	return tegra->core_min_uV;
 }
@@ -242,6 +263,10 @@ static int tegra20_cpu_voltage_update(struct tegra_regulator_coupler *tegra,
 	if (cpu_uV < 0)
 		return cpu_uV;

+	/* store boot voltage level */
+	if (!tegra->cpu_min_uV)
+		tegra->cpu_min_uV = cpu_uV;
+
 	/*
 	 * CPU's regulator may not have any consumers, hence the voltage
 	 * must not be changed in that case because CPU simply won't
@@ -250,6 +275,10 @@ static int tegra20_cpu_voltage_update(struct tegra_regulator_coupler *tegra,
 	if (!cpu_min_uV_consumers)
 		cpu_min_uV = cpu_uV;

+	/* restore boot voltage level */
+	if (tegra->sys_reboot_mode)
+		cpu_min_uV = max(cpu_min_uV, tegra->cpu_min_uV);
+
 	if (cpu_min_uV > cpu_uV) {
 		err = tegra20_core_rtc_update(tegra, core_rdev, rtc_rdev,
 					      cpu_uV, cpu_min_uV);
@@ -290,6 +319,8 @@ static int tegra20_regulator_balance_voltage(struct regulator_coupler *coupler,
 		return -EINVAL;
 	}

+	tegra->sys_reboot_mode = READ_ONCE(tegra->sys_reboot_mode_req);
+
 	if (rdev == cpu_rdev)
 		return tegra20_cpu_voltage_update(tegra, cpu_rdev,
 						  core_rdev, rtc_rdev);
@@ -303,6 +334,51 @@ static int tegra20_regulator_balance_voltage(struct regulator_coupler *coupler,
 	return -EPERM;
 }

+static int tegra20_regulator_prepare_reboot(struct tegra_regulator_coupler *tegra,
+					    bool sys_reboot_mode)
+{
+	int err;
+
+	if (!tegra->core_rdev || !tegra->rtc_rdev || !tegra->cpu_rdev)
+		return 0;
+
+	WRITE_ONCE(tegra->sys_reboot_mode_req, true);
+
+	/*
+	 * Some devices use CPU soft-reboot method and in this case we
+	 * should ensure that voltages are sane for the reboot by restoring
+	 * the minimum boot levels.
+	 */
+	err = regulator_sync_voltage_rdev(tegra->cpu_rdev);
+	if (err)
+		return err;
+
+	err = regulator_sync_voltage_rdev(tegra->core_rdev);
+	if (err)
+		return err;
+
+	WRITE_ONCE(tegra->sys_reboot_mode_req, sys_reboot_mode);
+
+	return 0;
+}
+
+static int tegra20_regulator_reboot(struct notifier_block *notifier,
+				    unsigned long event, void *cmd)
+{
+	struct tegra_regulator_coupler *tegra;
+	int ret;
+
+	if (event != SYS_RESTART)
+		return NOTIFY_DONE;
+
+	tegra = container_of(notifier, struct tegra_regulator_coupler,
+			     reboot_notifier);
+
+	ret = tegra20_regulator_prepare_reboot(tegra, true);
+
+	return notifier_from_errno(ret);
+}
+
 static int tegra20_regulator_attach(struct regulator_coupler *coupler,
 				    struct regulator_dev *rdev)
 {
@@ -335,6 +411,14 @@ static int tegra20_regulator_detach(struct regulator_coupler *coupler,
 {
 	struct tegra_regulator_coupler *tegra = to_tegra_coupler(coupler);

+	/*
+	 * We don't expect regulators to be decoupled during reboot,
+	 * this may race with the reboot handler and shouldn't ever
+	 * happen in practice.
+	 */
+	if (WARN_ON_ONCE(system_state > SYSTEM_RUNNING))
+		return -EPERM;
+
 	if (tegra->core_rdev == rdev) {
 		tegra->core_rdev = NULL;
 		return 0;
@@ -359,13 +443,19 @@ static struct tegra_regulator_coupler tegra20_coupler = {
 		.detach_regulator = tegra20_regulator_detach,
 		.balance_voltage = tegra20_regulator_balance_voltage,
 	},
+	.reboot_notifier.notifier_call = tegra20_regulator_reboot,
 };

 static int __init tegra_regulator_coupler_init(void)
 {
+	int err;
+
 	if (!of_machine_is_compatible("nvidia,tegra20"))
 		return 0;

+	err = register_reboot_notifier(&tegra20_coupler.reboot_notifier);
+	WARN_ON(err);
+
 	return regulator_coupler_register(&tegra20_coupler.coupler);
 }
 arch_initcall(tegra_regulator_coupler_init);
--- a/drivers/soc/tegra/regulators-tegra30.c
+++ b/drivers/soc/tegra/regulators-tegra30.c
@@ -12,17 +12,22 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/of.h>
+#include <linux/reboot.h>
 #include <linux/regulator/coupler.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>

 #include <soc/tegra/fuse.h>
+#include <soc/tegra/pmc.h>

 struct tegra_regulator_coupler {
 	struct regulator_coupler coupler;
 	struct regulator_dev *core_rdev;
 	struct regulator_dev *cpu_rdev;
-	int core_min_uV;
+	struct notifier_block reboot_notifier;
+	int core_min_uV, cpu_min_uV;
+	bool sys_reboot_mode_req;
+	bool sys_reboot_mode;
 };

 static inline struct tegra_regulator_coupler *
@@ -39,6 +44,21 @@ static int tegra30_core_limit(struct tegra_regulator_coupler *tegra,
 	int core_cur_uV;
 	int err;

+	/*
+	 * Tegra30 SoC has critical DVFS-capable devices that are
+	 * permanently-active or active at a boot time, like EMC
+	 * (DRAM controller) or Display controller for example.
+	 *
+	 * The voltage of a CORE SoC power domain shall not be dropped below
+	 * a minimum level, which is determined by device's clock rate.
+	 * This means that we can't fully allow CORE voltage scaling until
+	 * the state of all DVFS-critical CORE devices is synced.
+	 */
+	if (tegra_pmc_core_domain_state_synced() && !tegra->sys_reboot_mode) {
+		pr_info_once("voltage state synced\n");
+		return 0;
+	}
+
 	if (tegra->core_min_uV > 0)
 		return tegra->core_min_uV;

@@ -59,7 +79,7 @@ static int tegra30_core_limit(struct tegra_regulator_coupler *tegra,
 	 */
 	tegra->core_min_uV = core_max_uV;

-	pr_info("core minimum voltage limited to %duV\n", tegra->core_min_uV);
+	pr_info("core voltage initialized to %duV\n", tegra->core_min_uV);

 	return tegra->core_min_uV;
 }
@@ -172,6 +192,10 @@ static int tegra30_voltage_update(struct tegra_regulator_coupler *tegra,
 	if (cpu_uV < 0)
 		return cpu_uV;

+	/* store boot voltage level */
+	if (!tegra->cpu_min_uV)
+		tegra->cpu_min_uV = cpu_uV;
+
 	/*
 	 * CPU's regulator may not have any consumers, hence the voltage
 	 * must not be changed in that case because CPU simply won't
@@ -195,6 +219,10 @@ static int tegra30_voltage_update(struct tegra_regulator_coupler *tegra,
 	if (err)
 		return err;

+	/* restore boot voltage level */
+	if (tegra->sys_reboot_mode)
+		cpu_min_uV = max(cpu_min_uV, tegra->cpu_min_uV);
+
 	if (core_min_limited_uV > core_uV) {
 		pr_err("core voltage constraint violated: %d %d %d\n",
 		       core_uV, core_min_limited_uV, cpu_uV);
@@ -263,9 +291,56 @@ static int tegra30_regulator_balance_voltage(struct regulator_coupler *coupler,
 		return -EINVAL;
 	}

+	tegra->sys_reboot_mode = READ_ONCE(tegra->sys_reboot_mode_req);
+
 	return tegra30_voltage_update(tegra, cpu_rdev, core_rdev);
 }

+static int tegra30_regulator_prepare_reboot(struct tegra_regulator_coupler *tegra,
+					    bool sys_reboot_mode)
+{
+	int err;
+
+	if (!tegra->core_rdev || !tegra->cpu_rdev)
+		return 0;
+
+	WRITE_ONCE(tegra->sys_reboot_mode_req, true);
+
+	/*
+	 * Some devices use CPU soft-reboot method and in this case we
+	 * should ensure that voltages are sane for the reboot by restoring
+	 * the minimum boot levels.
+	 */
+	err = regulator_sync_voltage_rdev(tegra->cpu_rdev);
+	if (err)
+		return err;
+
+	err = regulator_sync_voltage_rdev(tegra->core_rdev);
+	if (err)
+		return err;
+
+	WRITE_ONCE(tegra->sys_reboot_mode_req, sys_reboot_mode);
+
+	return 0;
+}
+
+static int tegra30_regulator_reboot(struct notifier_block *notifier,
+				    unsigned long event, void *cmd)
+{
+	struct tegra_regulator_coupler *tegra;
+	int ret;
+
+	if (event != SYS_RESTART)
+		return NOTIFY_DONE;
+
+	tegra = container_of(notifier, struct tegra_regulator_coupler,
+			     reboot_notifier);
+
+	ret = tegra30_regulator_prepare_reboot(tegra, true);
+
+	return notifier_from_errno(ret);
+}
+
 static int tegra30_regulator_attach(struct regulator_coupler *coupler,
 				    struct regulator_dev *rdev)
 {
@@ -292,6 +367,14 @@ static int tegra30_regulator_detach(struct regulator_coupler *coupler,
 {
 	struct tegra_regulator_coupler *tegra = to_tegra_coupler(coupler);

+	/*
+	 * We don't expect regulators to be decoupled during reboot,
+	 * this may race with the reboot handler and shouldn't ever
+	 * happen in practice.
+	 */
+	if (WARN_ON_ONCE(system_state > SYSTEM_RUNNING))
+		return -EPERM;
+
 	if (tegra->core_rdev == rdev) {
 		tegra->core_rdev = NULL;
 		return 0;
@@ -311,13 +394,19 @@ static struct tegra_regulator_coupler tegra30_coupler = {
 		.detach_regulator = tegra30_regulator_detach,
 		.balance_voltage = tegra30_regulator_balance_voltage,
 	},
+	.reboot_notifier.notifier_call = tegra30_regulator_reboot,
 };

 static int __init tegra_regulator_coupler_init(void)
 {
+	int err;
+
 	if (!of_machine_is_compatible("nvidia,tegra30"))
 		return 0;

+	err = register_reboot_notifier(&tegra30_coupler.reboot_notifier);
+	WARN_ON(err);
+
 	return regulator_coupler_register(&tegra30_coupler.coupler);
 }
 arch_initcall(tegra_regulator_coupler_init);
--- a/include/linux/platform_data/pata_ixp4xx_cf.h
+++ b/include/linux/platform_data/pata_ixp4xx_cf.h
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __PLATFORM_DATA_PATA_IXP4XX_H
+#define __PLATFORM_DATA_PATA_IXP4XX_H
+
+#include <linux/types.h>
+
+/*
+ * This structure provide a means for the board setup code
+ * to give information to th pata_ixp4xx driver. It is
+ * passed as platform_data.
+ */
+struct ixp4xx_pata_data {
+	volatile u32	*cs0_cfg;
+	volatile u32	*cs1_cfg;
+	unsigned long	cs0_bits;
+	unsigned long	cs1_bits;
+	void __iomem	*cs0;
+	void __iomem	*cs1;
+};
+
+#endif
--- a/arch/arm/mach-ixp4xx/include/mach/cpu.h
+++ b/arch/arm/mach-ixp4xx/include/mach/cpu.h
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * arch/arm/mach-ixp4xx/include/mach/cpu.h
- *
 * IXP4XX cpu type detection
 *
 * Copyright (C) 2007 MontaVista Software, Inc.
 */

-#ifndef __ASM_ARCH_CPU_H__
-#define __ASM_ARCH_CPU_H__
+#ifndef __SOC_IXP4XX_CPU_H__
+#define __SOC_IXP4XX_CPU_H__

 #include <linux/io.h>
+#ifdef CONFIG_ARM
 #include <asm/cputype.h>
+#endif

 /* Processor id value in CP15 Register 0 */
 #define IXP42X_PROCESSOR_ID_VALUE	0x690541c0 /* including unused 0x690541Ex */
@@ -23,6 +23,61 @@
 #define IXP46X_PROCESSOR_ID_VALUE	0x69054200 /* including IXP455 */
 #define IXP46X_PROCESSOR_ID_MASK	0xfffffff0

+/* "fuse" bits of IXP_EXP_CFG2 */
+/* All IXP4xx CPUs */
+#define IXP4XX_FEATURE_RCOMP		(1 << 0)
+#define IXP4XX_FEATURE_USB_DEVICE	(1 << 1)
+#define IXP4XX_FEATURE_HASH		(1 << 2)
+#define IXP4XX_FEATURE_AES		(1 << 3)
+#define IXP4XX_FEATURE_DES		(1 << 4)
+#define IXP4XX_FEATURE_HDLC		(1 << 5)
+#define IXP4XX_FEATURE_AAL		(1 << 6)
+#define IXP4XX_FEATURE_HSS		(1 << 7)
+#define IXP4XX_FEATURE_UTOPIA		(1 << 8)
+#define IXP4XX_FEATURE_NPEB_ETH0	(1 << 9)
+#define IXP4XX_FEATURE_NPEC_ETH		(1 << 10)
+#define IXP4XX_FEATURE_RESET_NPEA	(1 << 11)
+#define IXP4XX_FEATURE_RESET_NPEB	(1 << 12)
+#define IXP4XX_FEATURE_RESET_NPEC	(1 << 13)
+#define IXP4XX_FEATURE_PCI		(1 << 14)
+#define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT	(3 << 16)
+#define IXP4XX_FEATURE_XSCALE_MAX_FREQ	(3 << 22)
+#define IXP42X_FEATURE_MASK		(IXP4XX_FEATURE_RCOMP            | \
+					 IXP4XX_FEATURE_USB_DEVICE       | \
+					 IXP4XX_FEATURE_HASH             | \
+					 IXP4XX_FEATURE_AES              | \
+					 IXP4XX_FEATURE_DES              | \
+					 IXP4XX_FEATURE_HDLC             | \
+					 IXP4XX_FEATURE_AAL              | \
+					 IXP4XX_FEATURE_HSS              | \
+					 IXP4XX_FEATURE_UTOPIA           | \
+					 IXP4XX_FEATURE_NPEB_ETH0        | \
+					 IXP4XX_FEATURE_NPEC_ETH         | \
+					 IXP4XX_FEATURE_RESET_NPEA       | \
+					 IXP4XX_FEATURE_RESET_NPEB       | \
+					 IXP4XX_FEATURE_RESET_NPEC       | \
+					 IXP4XX_FEATURE_PCI              | \
+					 IXP4XX_FEATURE_UTOPIA_PHY_LIMIT | \
+					 IXP4XX_FEATURE_XSCALE_MAX_FREQ)
+
+
+/* IXP43x/46x CPUs */
+#define IXP4XX_FEATURE_ECC_TIMESYNC	(1 << 15)
+#define IXP4XX_FEATURE_USB_HOST		(1 << 18)
+#define IXP4XX_FEATURE_NPEA_ETH		(1 << 19)
+#define IXP43X_FEATURE_MASK		(IXP42X_FEATURE_MASK             | \
+					 IXP4XX_FEATURE_ECC_TIMESYNC     | \
+					 IXP4XX_FEATURE_USB_HOST         | \
+					 IXP4XX_FEATURE_NPEA_ETH)
+
+/* IXP46x CPU (including IXP455) only */
+#define IXP4XX_FEATURE_NPEB_ETH_1_TO_3	(1 << 20)
+#define IXP4XX_FEATURE_RSA		(1 << 21)
+#define IXP46X_FEATURE_MASK		(IXP43X_FEATURE_MASK             | \
+					 IXP4XX_FEATURE_NPEB_ETH_1_TO_3  | \
+					 IXP4XX_FEATURE_RSA)
+
+#ifdef CONFIG_ARCH_IXP4XX
 #define cpu_is_ixp42x_rev_a0() ((read_cpuid_id() & (IXP42X_PROCESSOR_ID_MASK | 0xF)) == \
 				IXP42X_PROCESSOR_ID_VALUE)
 #define cpu_is_ixp42x()	((read_cpuid_id() & IXP42X_PROCESSOR_ID_MASK) == \
@@ -32,23 +87,20 @@
 #define cpu_is_ixp46x()	((read_cpuid_id() & IXP46X_PROCESSOR_ID_MASK) == \
 			 IXP46X_PROCESSOR_ID_VALUE)

+u32 ixp4xx_read_feature_bits(void);
+void ixp4xx_write_feature_bits(u32 value);
+#else
+#define cpu_is_ixp42x_rev_a0()		0
+#define cpu_is_ixp42x()			0
+#define cpu_is_ixp43x()			0
+#define cpu_is_ixp46x()			0
 static inline u32 ixp4xx_read_feature_bits(void)
 {
-	u32 val = ~__raw_readl(IXP4XX_EXP_CFG2);
-
-	if (cpu_is_ixp42x_rev_a0())
-		return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP |
-					       IXP4XX_FEATURE_AES);
-	if (cpu_is_ixp42x())
-		return val & IXP42X_FEATURE_MASK;
-	if (cpu_is_ixp43x())
-		return val & IXP43X_FEATURE_MASK;
-	return val & IXP46X_FEATURE_MASK;
+	return 0;
 }
-
 static inline void ixp4xx_write_feature_bits(u32 value)
 {
-	__raw_writel(~value, IXP4XX_EXP_CFG2);
 }
+#endif

 #endif  /* _ASM_ARCH_CPU_H */
--- a/include/linux/soc/samsung/exynos-regs-pmu.h
+++ b/include/linux/soc/samsung/exynos-regs-pmu.h
@@ -611,12 +611,6 @@
 #define EXYNOS5420_FSYS2_OPTION					0x4168
 #define EXYNOS5420_PSGEN_OPTION					0x4188

-/* For EXYNOS_CENTRAL_SEQ_OPTION */
-#define EXYNOS5_USE_STANDBYWFI_ARM_CORE0			BIT(16)
-#define EXYNOS5_USE_STANDBYWFI_ARM_CORE1			BUT(17)
-#define EXYNOS5_USE_STANDBYWFE_ARM_CORE0			BIT(24)
-#define EXYNOS5_USE_STANDBYWFE_ARM_CORE1			BIT(25)
-
 #define EXYNOS5420_ARM_USE_STANDBY_WFI0				BIT(4)
 #define EXYNOS5420_ARM_USE_STANDBY_WFI1				BIT(5)
 #define EXYNOS5420_ARM_USE_STANDBY_WFI2				BIT(6)

--- a/include/soc/imx/cpu.h
+++ b/include/soc/imx/cpu.h
@@ -9,6 +9,7 @@
 #define MXC_CPU_MX27		27
 #define MXC_CPU_MX31		31
 #define MXC_CPU_MX35		35
+#define MXC_CPU_MX50		50
 #define MXC_CPU_MX51		51
 #define MXC_CPU_MX53		53
 #define MXC_CPU_IMX6SL		0x60

--- a/include/soc/tegra/common.h
+++ b/include/soc/tegra/common.h
@@ -6,6 +6,37 @@
 #ifndef __SOC_TEGRA_COMMON_H__
 #define __SOC_TEGRA_COMMON_H__

+#include <linux/errno.h>
+#include <linux/types.h>
+
+struct device;
+
+/**
+ * Tegra SoC core device OPP table configuration
+ *
+ * @init_state: pre-initialize OPP state of a device
+ */
+struct tegra_core_opp_params {
+	bool init_state;
+};
+
+#ifdef CONFIG_ARCH_TEGRA
 bool soc_is_tegra(void);

+int devm_tegra_core_dev_init_opp_table(struct device *dev,
+				       struct tegra_core_opp_params *params);
+#else
+static inline bool soc_is_tegra(void)
+{
+	return false;
+}
+
+static inline int
+devm_tegra_core_dev_init_opp_table(struct device *dev,
+				   struct tegra_core_opp_params *params)
+{
+	return -ENODEV;
+}
+#endif
+
 #endif /* __SOC_TEGRA_COMMON_H__ */
--- a/include/soc/tegra/fuse.h
+++ b/include/soc/tegra/fuse.h
@@ -52,14 +52,28 @@ struct tegra_sku_info {
 	enum tegra_revision revision;
 };

+#ifdef CONFIG_ARCH_TEGRA
+extern struct tegra_sku_info tegra_sku_info;
 u32 tegra_read_straps(void);
 u32 tegra_read_ram_code(void);
 int tegra_fuse_readl(unsigned long offset, u32 *value);
-
-#ifdef CONFIG_ARCH_TEGRA
-extern struct tegra_sku_info tegra_sku_info;
 #else
 static struct tegra_sku_info tegra_sku_info __maybe_unused;
+
+static inline u32 tegra_read_straps(void)
+{
+	return 0;
+}
+
+static inline u32 tegra_read_ram_code(void)
+{
+	return 0;
+}
+
+static inline int tegra_fuse_readl(unsigned long offset, u32 *value)
+{
+	return -ENODEV;
+}
 #endif

 struct device *tegra_soc_device_register(void);

--- a/include/soc/tegra/pmc.h
+++ b/include/soc/tegra/pmc.h
@@ -171,6 +171,8 @@ int tegra_io_rail_power_off(unsigned int id);
 void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode);
 void tegra_pmc_enter_suspend_mode(enum tegra_suspend_mode mode);

+bool tegra_pmc_core_domain_state_synced(void);
+
 #else
 static inline int tegra_powergate_power_on(unsigned int id)
 {
@@ -227,6 +229,11 @@ static inline void tegra_pmc_enter_suspend_mode(enum tegra_suspend_mode mode)
 {
 }

+static inline bool tegra_pmc_core_domain_state_synced(void)
+{
+	return false;
+}
+
 #endif /* CONFIG_SOC_TEGRA_PMC */

 #if defined(CONFIG_SOC_TEGRA_PMC) && defined(CONFIG_PM_SLEEP)