e1000e: make ioport free

This patch makes e1000e driver ioport-free.
This corrects behavior in probe function so as not to request ioport
resources as long as they are not really needed.
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

drivers/net/e1000e/e1000.h

@@ -283,6 +283,10 @@ struct e1000_adapter {
 	unsigned long led_status;
 
 	unsigned int flags;
+
+	/* for ioport free */
+	int bars;
+	int need_ioport;
 };
 
 struct e1000_info {

drivers/net/e1000e/netdev.c

@@ -4002,7 +4002,11 @@ static int e1000_resume(struct pci_dev *pdev)
 	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
 	e1000e_disable_l1aspm(pdev);
-	err = pci_enable_device(pdev);
+
+	if (adapter->need_ioport)
+		err = pci_enable_device(pdev);
+	else
+		err = pci_enable_device_mem(pdev);
 	if (err) {
 		dev_err(&pdev->dev,
 			"Cannot enable PCI device from suspend\n");
@@ -4103,9 +4107,14 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
+	int err;
 
 	e1000e_disable_l1aspm(pdev);
-	if (pci_enable_device(pdev)) {
+	if (adapter->need_ioport)
+		err = pci_enable_device(pdev);
+	else
+		err = pci_enable_device_mem(pdev);
+	if (err) {
 		dev_err(&pdev->dev,
 			"Cannot re-enable PCI device after reset.\n");
 		return PCI_ERS_RESULT_DISCONNECT;
@@ -4183,6 +4192,21 @@ static void e1000_print_device_info(struct e1000_adapter *adapter)
 		  (pba_num >> 8), (pba_num & 0xff));
 }
 
+/**
+ * e1000e_is_need_ioport - determine if an adapter needs ioport resources or not
+ * @pdev: PCI device information struct
+ *
+ * Returns true if an adapters needs ioport resources
+ **/
+static int e1000e_is_need_ioport(struct pci_dev *pdev)
+{
+	switch (pdev->device) {
+	/* Currently there are no adapters that need ioport resources */
+	default:
+		return false;
+	}
+}
+
 /**
  * e1000_probe - Device Initialization Routine
  * @pdev: PCI device information struct
@@ -4208,9 +4232,19 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	int i, err, pci_using_dac;
 	u16 eeprom_data = 0;
 	u16 eeprom_apme_mask = E1000_EEPROM_APME;
+	int bars, need_ioport;
 
 	e1000e_disable_l1aspm(pdev);
-	err = pci_enable_device(pdev);
+
+	/* do not allocate ioport bars when not needed */
+	need_ioport = e1000e_is_need_ioport(pdev);
+	if (need_ioport) {
+		bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
+		err = pci_enable_device(pdev);
+	} else {
+		bars = pci_select_bars(pdev, IORESOURCE_MEM);
+		err = pci_enable_device_mem(pdev);
+	}
 	if (err)
 		return err;
 
@@ -4233,7 +4267,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 		}
 	}
 
-	err = pci_request_regions(pdev, e1000e_driver_name);
+	err = pci_request_selected_regions(pdev, bars, e1000e_driver_name);
 	if (err)
 		goto err_pci_reg;
 
@@ -4258,6 +4292,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	adapter->hw.adapter = adapter;
 	adapter->hw.mac.type = ei->mac;
 	adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
+	adapter->bars = bars;
+	adapter->need_ioport = need_ioport;
 
 	mmio_start = pci_resource_start(pdev, 0);
 	mmio_len = pci_resource_len(pdev, 0);
@@ -4497,7 +4533,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 err_ioremap:
 	free_netdev(netdev);
 err_alloc_etherdev:
-	pci_release_regions(pdev);
+	pci_release_selected_regions(pdev, bars);
 err_pci_reg:
 err_dma:
 	pci_disable_device(pdev);
@@ -4545,7 +4581,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
 	iounmap(adapter->hw.hw_addr);
 	if (adapter->hw.flash_address)
 		iounmap(adapter->hw.flash_address);
-	pci_release_regions(pdev);
+	pci_release_selected_regions(pdev, adapter->bars);
 
 	free_netdev(netdev);