Commit 6e5ccf83 authored by Erik Andr?n's avatar Erik Andr?n Committed by Mauro Carvalho Chehab

V4L/DVB (11463): gspca - m5602-po1030: Remove unneeded init sequences

po1030: There's a lot of redundant writes to the bridge and sensor.
Remove them.
Signed-off-by: default avatarErik Andr?n <erik.andren@gmail.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent c996b368
......@@ -254,42 +254,6 @@ static const unsigned char init_po1030[][3] =
{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
/*end of sequence 1*/
/*sequence 2 (same as stop sequence)*/
{SENSOR, PO1030_AUTOCTRL2, 0x24},
{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
{BRIDGE, M5602_XB_GPIO_DAT, 0x04},
{BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
{BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
{BRIDGE, M5602_XB_GPIO_DAT_H, 0x02},
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04},
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
/*end of sequence 2*/
/*sequence 5*/
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x06},
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
{BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x81},
{BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82},
{BRIDGE, M5602_XB_SIG_INI, 0x01},
{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
{BRIDGE, M5602_XB_VSYNC_PARA, 0x02},
{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
{BRIDGE, M5602_XB_VSYNC_PARA, 0x01},
{BRIDGE, M5602_XB_VSYNC_PARA, 0xec},
{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
{BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
{BRIDGE, M5602_XB_SIG_INI, 0x00},
{BRIDGE, M5602_XB_SIG_INI, 0x02},
{BRIDGE, M5602_XB_HSYNC_PARA, 0x00},
{BRIDGE, M5602_XB_HSYNC_PARA, 0x00},
{BRIDGE, M5602_XB_HSYNC_PARA, 0x02},
{BRIDGE, M5602_XB_HSYNC_PARA, 0x87},
{BRIDGE, M5602_XB_SIG_INI, 0x00},
/*end of sequence 5*/
/*sequence 2 stop */
{SENSOR, PO1030_AUTOCTRL2, PO1030_SENSOR_RESET | (1 << 2)},
......@@ -305,15 +269,6 @@ static const unsigned char init_po1030[][3] =
static const unsigned char start_po1030[][3] =
{
/* ---------------------------------
* end of init - begin of start
* --------------------------------- */
/*sequence 3*/
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
{BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
{BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
/*end of sequence 3*/
/*sequence 4*/
{BRIDGE, M5602_XB_GPIO_DIR, 0x05},
{BRIDGE, M5602_XB_GPIO_DAT, 0x00},
......@@ -358,8 +313,6 @@ static const unsigned char start_po1030[][3] =
{SENSOR, PO1030_EGA, 0x80},
{SENSOR, 0x78, 0x14},
{SENSOR, 0x6f, 0x01},
{SENSOR, PO1030_CONTROL1, PO1030_AUTO_SUBSAMPLING |
PO1030_FRAME_EQUAL},
{SENSOR, PO1030_GLOBALGAINMAX, 0x14},
{SENSOR, PO1030_Cb_U_GAIN, 0x38},
{SENSOR, PO1030_Cr_V_GAIN, 0x38},
......@@ -408,11 +361,6 @@ static const unsigned char start_po1030[][3] =
* decrease the FPS (Frame Per Second) */
{BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
{BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
/* Sets the width */
{SENSOR, PO1030_FRAMEWIDTH_H, 0x02},
{SENSOR, PO1030_FRAMEWIDTH_L, 0xef}
/*end of sequence 6*/
};
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment