Commit 6e986a8f authored by AngeloGioacchino Del Regno's avatar AngeloGioacchino Del Regno Committed by Dmitry Baryshkov

dt-bindings: display: msm: Add binding for msm8998 dpu

Add yaml binding for msm8998 dpu1 support.
Signed-off-by: default avatarAngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: default avatarJami Kettunen <jami.kettunen@somainline.org>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220113145111.29984-4-jami.kettunen@somainline.orgSigned-off-by: default avatarDmitry Baryshkov <dmitry.baryshkov@linaro.org>
parent 94391a14
# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/msm/dpu-msm8998.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Display DPU dt properties for MSM8998 target
maintainers:
- AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
description: |
Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
bindings of MDSS and DPU are mentioned for MSM8998 target.
properties:
compatible:
items:
- const: qcom,msm8998-mdss
reg:
maxItems: 1
reg-names:
const: mdss
power-domains:
maxItems: 1
clocks:
items:
- description: Display AHB clock
- description: Display AXI clock
- description: Display core clock
clock-names:
items:
- const: iface
- const: bus
- const: core
interrupts:
maxItems: 1
interrupt-controller: true
"#address-cells": true
"#size-cells": true
"#interrupt-cells":
const: 1
iommus:
items:
- description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
ranges: true
patternProperties:
"^display-controller@[0-9a-f]+$":
type: object
description: Node containing the properties of DPU.
properties:
compatible:
items:
- const: qcom,msm8998-dpu
reg:
items:
- description: Address offset and size for mdp register set
- description: Address offset and size for regdma register set
- description: Address offset and size for vbif register set
- description: Address offset and size for non-realtime vbif register set
reg-names:
items:
- const: mdp
- const: regdma
- const: vbif
- const: vbif_nrt
clocks:
items:
- description: Display ahb clock
- description: Display axi clock
- description: Display mem-noc clock
- description: Display core clock
- description: Display vsync clock
clock-names:
items:
- const: iface
- const: bus
- const: mnoc
- const: core
- const: vsync
interrupts:
maxItems: 1
power-domains:
maxItems: 1
operating-points-v2: true
ports:
$ref: /schemas/graph.yaml#/properties/ports
description: |
Contains the list of output ports from DPU device. These ports
connect to interfaces that are external to the DPU hardware,
such as DSI, DP etc. Each output port contains an endpoint that
describes how it is connected to an external interface.
properties:
port@0:
$ref: /schemas/graph.yaml#/properties/port
description: DPU_INTF1 (DSI1)
port@1:
$ref: /schemas/graph.yaml#/properties/port
description: DPU_INTF2 (DSI2)
required:
- port@0
- port@1
required:
- compatible
- reg
- reg-names
- clocks
- interrupts
- power-domains
- operating-points-v2
- ports
required:
- compatible
- reg
- reg-names
- power-domains
- clocks
- interrupts
- interrupt-controller
- iommus
- ranges
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/qcom,mmcc-msm8998.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/qcom-rpmpd.h>
display-subsystem@c900000 {
compatible = "qcom,msm8998-mdss";
reg = <0x0c900000 0x1000>;
reg-names = "mdss";
clocks = <&mmcc MDSS_AHB_CLK>,
<&mmcc MDSS_AXI_CLK>,
<&mmcc MDSS_MDP_CLK>;
clock-names = "iface", "bus", "core";
#address-cells = <1>;
#interrupt-cells = <1>;
#size-cells = <1>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
iommus = <&mmss_smmu 0>;
power-domains = <&mmcc MDSS_GDSC>;
ranges;
display-controller@c901000 {
compatible = "qcom,msm8998-dpu";
reg = <0x0c901000 0x8f000>,
<0x0c9a8e00 0xf0>,
<0x0c9b0000 0x2008>,
<0x0c9b8000 0x1040>;
reg-names = "mdp", "regdma", "vbif", "vbif_nrt";
clocks = <&mmcc MDSS_AHB_CLK>,
<&mmcc MDSS_AXI_CLK>,
<&mmcc MNOC_AHB_CLK>,
<&mmcc MDSS_MDP_CLK>,
<&mmcc MDSS_VSYNC_CLK>;
clock-names = "iface", "bus", "mnoc", "core", "vsync";
interrupt-parent = <&mdss>;
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
operating-points-v2 = <&mdp_opp_table>;
power-domains = <&rpmpd MSM8998_VDDMX>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dpu_intf1_out: endpoint {
remote-endpoint = <&dsi0_in>;
};
};
port@1 {
reg = <1>;
dpu_intf2_out: endpoint {
remote-endpoint = <&dsi1_in>;
};
};
};
};
};
...
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment