staging: qlge: Refill rx buffers up to multiple of 16

Reading the {s,l}bq_prod_idx registers on a running device, it appears that
the adapter will only use buffers up to prod_idx & 0xfff0. The driver
currently uses fixed-size guard zones (16 for sbq, 32 for lbq - don't know
why this difference). After the previous patch, this approach no longer
guarantees prod_idx values aligned on multiples of 16. While it appears
that we can write unaligned values to prod_idx without ill effects on
device operation, it makes more sense to change qlge_refill_bq() to refill
up to a limit that corresponds with the device's behavior.
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Link: https://lore.kernel.org/r/20190927101210.23856-17-bpoirier@suse.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/qlge/qlge.h

@@ -1423,6 +1423,9 @@ struct qlge_bq {
 	__le64 *base_indirect;
 	dma_addr_t base_indirect_dma;
 	struct qlge_bq_desc *queue;
+	/* prod_idx is the index of the first buffer that may NOT be used by
+	 * hw, ie. one after the last. Advanced by sw.
+	 */
 	void __iomem *prod_idx_db_reg;
 	/* next index where sw should refill a buffer for hw */
 	u16 next_to_use;
@@ -1442,6 +1445,11 @@ struct qlge_bq {
 					  offsetof(struct rx_ring, lbq))); \
 })
 
+/* Experience shows that the device ignores the low 4 bits of the tail index.
+ * Refill up to a x16 multiple.
+ */
+#define QLGE_BQ_ALIGN(index) ALIGN_DOWN(index, 16)
+
 #define QLGE_BQ_WRAP(index) ((index) & (QLGE_BQ_LEN - 1))
 
 struct rx_ring {

drivers/staging/qlge/qlge_main.c

@@ -1114,22 +1114,12 @@ static void qlge_refill_bq(struct qlge_bq *bq)
 	struct rx_ring *rx_ring = QLGE_BQ_CONTAINER(bq);
 	struct ql_adapter *qdev = rx_ring->qdev;
 	struct qlge_bq_desc *bq_desc;
-	int free_count, refill_count;
-	unsigned int reserved_count;
+	int refill_count;
 	int i;
 
-	if (bq->type == QLGE_SB)
-		reserved_count = 16;
-	else
-		reserved_count = 32;
-
-	free_count = bq->next_to_clean - bq->next_to_use;
-	if (free_count <= 0)
-		free_count += QLGE_BQ_LEN;
-
-	refill_count = free_count - reserved_count;
-	/* refill batch size */
-	if (refill_count < 16)
+	refill_count = QLGE_BQ_WRAP(QLGE_BQ_ALIGN(bq->next_to_clean - 1) -
+				    bq->next_to_use);
+	if (!refill_count)
 		return;
 
 	i = bq->next_to_use;
@@ -1164,11 +1154,14 @@ static void qlge_refill_bq(struct qlge_bq *bq)
 	i += QLGE_BQ_LEN;
 
 	if (bq->next_to_use != i) {
-		netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
-			     "ring %u %s: updating prod idx = %d.\n",
-			     rx_ring->cq_id, bq_type_name[bq->type], i);
+		if (QLGE_BQ_ALIGN(bq->next_to_use) != QLGE_BQ_ALIGN(i)) {
+			netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
+				     "ring %u %s: updating prod idx = %d.\n",
+				     rx_ring->cq_id, bq_type_name[bq->type],
+				     i);
+			ql_write_db_reg(i, bq->prod_idx_db_reg);
+		}
 		bq->next_to_use = i;
-		ql_write_db_reg(bq->next_to_use, bq->prod_idx_db_reg);
 	}
 }