Commit 6ecd86dc authored by Andy Walls's avatar Andy Walls Committed by Mauro Carvalho Chehab

V4L/DVB (9802): cx18: Add module parameters for finer control over buffer allocations

cx18: Add module parameters for finer control over buffer allocations.
User now has the option of setting smaller buffers to get lower
latency transfers from the encoder.  User can also now set the number
of buffers used for a stream explicitly.
Signed-off-by: default avatarAndy Walls <awalls@radix.net>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 66c2a6b0
......@@ -83,12 +83,28 @@ static char secam[] = "--";
static char ntsc[] = "-";
/* Buffers */
static int enc_mpg_buffers = CX18_DEFAULT_ENC_MPG_BUFFERS;
static int enc_ts_buffers = CX18_DEFAULT_ENC_TS_BUFFERS;
static int enc_mpg_buffers = CX18_DEFAULT_ENC_MPG_BUFFERS;
static int enc_idx_buffers = CX18_DEFAULT_ENC_IDX_BUFFERS;
static int enc_yuv_buffers = CX18_DEFAULT_ENC_YUV_BUFFERS;
static int enc_vbi_buffers = CX18_DEFAULT_ENC_VBI_BUFFERS;
static int enc_pcm_buffers = CX18_DEFAULT_ENC_PCM_BUFFERS;
static int enc_ts_bufsize = CX18_DEFAULT_ENC_TS_BUFSIZE;
static int enc_mpg_bufsize = CX18_DEFAULT_ENC_MPG_BUFSIZE;
static int enc_idx_bufsize = CX18_DEFAULT_ENC_IDX_BUFSIZE;
static int enc_yuv_bufsize = CX18_DEFAULT_ENC_YUV_BUFSIZE;
/* VBI bufsize based on standards supported by card tuner for now */
static int enc_pcm_bufsize = CX18_DEFAULT_ENC_PCM_BUFSIZE;
static int enc_ts_bufs = -1;
static int enc_mpg_bufs = -1;
static int enc_idx_bufs = -1;
static int enc_yuv_bufs = -1;
static int enc_vbi_bufs = -1;
static int enc_pcm_bufs = -1;
static int cx18_pci_latency = 1;
static int mmio_ndelay;
......@@ -108,12 +124,27 @@ module_param(retry_mmio, int, 0644);
module_param(cx18_pci_latency, int, 0644);
module_param(cx18_first_minor, int, 0644);
module_param(enc_mpg_buffers, int, 0644);
module_param(enc_ts_buffers, int, 0644);
module_param(enc_mpg_buffers, int, 0644);
module_param(enc_idx_buffers, int, 0644);
module_param(enc_yuv_buffers, int, 0644);
module_param(enc_vbi_buffers, int, 0644);
module_param(enc_pcm_buffers, int, 0644);
module_param(enc_ts_bufsize, int, 0644);
module_param(enc_mpg_bufsize, int, 0644);
module_param(enc_idx_bufsize, int, 0644);
module_param(enc_yuv_bufsize, int, 0644);
/* VBI bufsize based on standards supported by card tuner for now */
module_param(enc_pcm_bufsize, int, 0644);
module_param(enc_ts_bufs, int, 0644);
module_param(enc_mpg_bufs, int, 0644);
module_param(enc_idx_bufs, int, 0644);
module_param(enc_yuv_bufs, int, 0644);
module_param(enc_vbi_bufs, int, 0644);
module_param(enc_pcm_bufs, int, 0644);
MODULE_PARM_DESC(tuner, "Tuner type selection,\n"
"\t\t\tsee tuner.h for values");
MODULE_PARM_DESC(radio,
......@@ -154,21 +185,57 @@ MODULE_PARM_DESC(retry_mmio,
MODULE_PARM_DESC(mmio_ndelay,
"(Deprecated) MMIO accesses are now never purposely delayed\n"
"\t\t\tEffectively: 0 ns");
MODULE_PARM_DESC(enc_mpg_buffers,
"Encoder MPG Buffers (in MB)\n"
"\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_MPG_BUFFERS));
MODULE_PARM_DESC(enc_ts_buffers,
"Encoder TS Buffers (in MB)\n"
"Encoder TS buffer memory (MB). (enc_ts_bufs can override)\n"
"\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_TS_BUFFERS));
MODULE_PARM_DESC(enc_ts_bufsize,
"Size of an encoder TS buffer (kB)\n"
"\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_TS_BUFSIZE));
MODULE_PARM_DESC(enc_ts_bufs,
"Number of encoder TS buffers\n"
"\t\t\tDefault is computed from other enc_ts_* parameters");
MODULE_PARM_DESC(enc_mpg_buffers,
"Encoder MPG buffer memory (MB). (enc_mpg_bufs can override)\n"
"\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_MPG_BUFFERS));
MODULE_PARM_DESC(enc_mpg_bufsize,
"Size of an encoder MPG buffer (kB)\n"
"\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_MPG_BUFSIZE));
MODULE_PARM_DESC(enc_mpg_bufs,
"Number of encoder MPG buffers\n"
"\t\t\tDefault is computed from other enc_mpg_* parameters");
MODULE_PARM_DESC(enc_idx_buffers,
"Encoder IDX buffer memory (MB). (enc_idx_bufs can override)\n"
"\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_IDX_BUFFERS));
MODULE_PARM_DESC(enc_idx_bufsize,
"Size of an encoder IDX buffer (kB)\n"
"\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_IDX_BUFSIZE));
MODULE_PARM_DESC(enc_idx_bufs,
"Number of encoder IDX buffers\n"
"\t\t\tDefault is computed from other enc_idx_* parameters");
MODULE_PARM_DESC(enc_yuv_buffers,
"Encoder YUV Buffers (in MB)\n"
"Encoder YUV buffer memory (MB). (enc_yuv_bufs can override)\n"
"\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_YUV_BUFFERS));
MODULE_PARM_DESC(enc_yuv_bufsize,
"Size of an encoder YUV buffer (kB)\n"
"\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_YUV_BUFSIZE));
MODULE_PARM_DESC(enc_yuv_bufs,
"Number of encoder YUV buffers\n"
"\t\t\tDefault is computed from other enc_yuv_* parameters");
MODULE_PARM_DESC(enc_vbi_buffers,
"Encoder VBI Buffers (in MB)\n"
"Encoder VBI buffer memory (MB). (enc_vbi_bufs can override)\n"
"\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_VBI_BUFFERS));
MODULE_PARM_DESC(enc_vbi_bufs,
"Number of encoder VBI buffers\n"
"\t\t\tDefault is computed from enc_vbi_buffers & tuner std");
MODULE_PARM_DESC(enc_pcm_buffers,
"Encoder PCM buffers (in MB)\n"
"Encoder PCM buffer memory (MB). (enc_pcm_bufs can override)\n"
"\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_PCM_BUFFERS));
MODULE_PARM_DESC(enc_pcm_bufsize,
"Size of an encoder PCM buffer (kB)\n"
"\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_PCM_BUFSIZE));
MODULE_PARM_DESC(enc_pcm_bufs,
"Number of encoder PCM buffers\n"
"\t\t\tDefault is computed from other enc_pcm_* parameters");
MODULE_PARM_DESC(cx18_first_minor, "Set kernel number assigned to first card");
......@@ -361,11 +428,65 @@ static void cx18_process_options(struct cx18 *cx)
{
int i, j;
cx->options.megabytes[CX18_ENC_STREAM_TYPE_MPG] = enc_mpg_buffers;
cx->options.megabytes[CX18_ENC_STREAM_TYPE_TS] = enc_ts_buffers;
cx->options.megabytes[CX18_ENC_STREAM_TYPE_MPG] = enc_mpg_buffers;
cx->options.megabytes[CX18_ENC_STREAM_TYPE_IDX] = enc_idx_buffers;
cx->options.megabytes[CX18_ENC_STREAM_TYPE_YUV] = enc_yuv_buffers;
cx->options.megabytes[CX18_ENC_STREAM_TYPE_VBI] = enc_vbi_buffers;
cx->options.megabytes[CX18_ENC_STREAM_TYPE_PCM] = enc_pcm_buffers;
cx->options.megabytes[CX18_ENC_STREAM_TYPE_RAD] = 0; /* control only */
cx->stream_buffers[CX18_ENC_STREAM_TYPE_TS] = enc_ts_bufs;
cx->stream_buffers[CX18_ENC_STREAM_TYPE_MPG] = enc_mpg_bufs;
cx->stream_buffers[CX18_ENC_STREAM_TYPE_IDX] = enc_idx_bufs;
cx->stream_buffers[CX18_ENC_STREAM_TYPE_YUV] = enc_yuv_bufs;
cx->stream_buffers[CX18_ENC_STREAM_TYPE_VBI] = enc_vbi_bufs;
cx->stream_buffers[CX18_ENC_STREAM_TYPE_PCM] = enc_pcm_bufs;
cx->stream_buffers[CX18_ENC_STREAM_TYPE_RAD] = 0; /* control, no data */
cx->stream_buf_size[CX18_ENC_STREAM_TYPE_TS] = enc_ts_bufsize;
cx->stream_buf_size[CX18_ENC_STREAM_TYPE_MPG] = enc_mpg_bufsize;
cx->stream_buf_size[CX18_ENC_STREAM_TYPE_IDX] = enc_idx_bufsize;
cx->stream_buf_size[CX18_ENC_STREAM_TYPE_YUV] = enc_yuv_bufsize;
cx->stream_buf_size[CX18_ENC_STREAM_TYPE_VBI] = 0; /* computed later */
cx->stream_buf_size[CX18_ENC_STREAM_TYPE_PCM] = enc_pcm_bufsize;
cx->stream_buf_size[CX18_ENC_STREAM_TYPE_RAD] = 0; /* control no data */
/* Except for VBI ensure stream_buffers & stream_buf_size are valid */
for (i = 0; i < CX18_MAX_STREAMS; i++) {
/* User said to use 0 buffers */
if (cx->stream_buffers[i] == 0) {
cx->options.megabytes[i] = 0;
cx->stream_buf_size[i] = 0;
continue;
}
/* User said to use 0 MB total */
if (cx->options.megabytes[i] <= 0) {
cx->options.megabytes[i] = 0;
cx->stream_buffers[i] = 0;
cx->stream_buf_size[i] = 0;
continue;
}
/* VBI is computed later or user said buffer has size 0 */
if (cx->stream_buf_size[i] <= 0) {
if (i != CX18_ENC_STREAM_TYPE_VBI) {
cx->options.megabytes[i] = 0;
cx->stream_buffers[i] = 0;
cx->stream_buf_size[i] = 0;
}
continue;
}
if (cx->stream_buffers[i] < 0) {
cx->stream_buffers[i] = cx->options.megabytes[i] * 1024
/ cx->stream_buf_size[i];
} else {
/* N.B. This might round down to 0 */
cx->options.megabytes[i] =
cx->stream_buffers[i] * cx->stream_buf_size[i] / 1024;
}
cx->stream_buf_size[i] *= 1024; /* convert from kB to bytes */
}
cx->options.cardtype = cardtype[cx->num];
cx->options.tuner = tuner[cx->num];
cx->options.radio = radio[cx->num];
......@@ -768,13 +889,18 @@ static int __devinit cx18_probe(struct pci_dev *dev,
}
cx->params.video_gop_size = cx->is_60hz ? 15 : 12;
cx->stream_buf_size[CX18_ENC_STREAM_TYPE_MPG] = 0x08000;
cx->stream_buf_size[CX18_ENC_STREAM_TYPE_TS] = 0x08000;
cx->stream_buf_size[CX18_ENC_STREAM_TYPE_PCM] = 0x01200;
cx->stream_buf_size[CX18_ENC_STREAM_TYPE_YUV] = 0x20000;
vbi_buf_size = cx->vbi.raw_size * (cx->is_60hz ? 24 : 36) / 2;
cx->stream_buf_size[CX18_ENC_STREAM_TYPE_VBI] = vbi_buf_size;
if (cx->stream_buffers[CX18_ENC_STREAM_TYPE_VBI] < 0)
cx->stream_buffers[CX18_ENC_STREAM_TYPE_VBI] =
cx->options.megabytes[CX18_ENC_STREAM_TYPE_VBI] * 1024 * 1024
/ vbi_buf_size;
else
cx->options.megabytes[CX18_ENC_STREAM_TYPE_VBI] =
cx->stream_buffers[CX18_ENC_STREAM_TYPE_VBI] * vbi_buf_size
/ (1024 * 1024);
if (cx->options.radio > 0)
cx->v4l2_cap |= V4L2_CAP_RADIO;
......
......@@ -115,6 +115,17 @@
#define CX18_DEFAULT_ENC_VBI_BUFFERS 1
#define CX18_DEFAULT_ENC_PCM_BUFFERS 1
/* Maximum firmware DMA buffers per stream */
#define CX18_MAX_MDLS_PER_STREAM 63
/* DMA buffer, default size in kB allocated */
#define CX18_DEFAULT_ENC_TS_BUFSIZE 32
#define CX18_DEFAULT_ENC_MPG_BUFSIZE 32
#define CX18_DEFAULT_ENC_IDX_BUFSIZE 32
#define CX18_DEFAULT_ENC_YUV_BUFSIZE 128
/* Default VBI bufsize based on standards supported by card tuner for now */
#define CX18_DEFAULT_ENC_PCM_BUFSIZE 4
/* i2c stuff */
#define I2C_CLIENTS_MAX 16
......@@ -408,6 +419,7 @@ struct cx18 {
struct mutex serialize_lock; /* mutex used to serialize open/close/start/stop/ioctl operations */
struct cx18_options options; /* User options */
int stream_buffers[CX18_MAX_STREAMS]; /* # of buffers for each stream */
int stream_buf_size[CX18_MAX_STREAMS]; /* Stream buffer size */
struct cx18_stream streams[CX18_MAX_STREAMS]; /* Stream data */
unsigned long i_flags; /* global cx18 flags */
......
......@@ -217,6 +217,10 @@ int cx18_dvb_register(struct cx18_stream *stream)
dvb_net_init(dvb_adapter, &dvb->dvbnet, dmx);
CX18_INFO("DVB Frontend registered\n");
CX18_INFO("Registered DVB adapter%d for %s (%d x %d kB)\n",
stream->dvb.dvb_adapter.num, stream->name,
stream->buffers, stream->buf_size/1024);
mutex_init(&dvb->feedlock);
dvb->enabled = 1;
return ret;
......
......@@ -111,7 +111,6 @@ static void cx18_stream_init(struct cx18 *cx, int type)
{
struct cx18_stream *s = &cx->streams[type];
struct video_device *dev = s->v4l2dev;
u32 max_size = cx->options.megabytes[type] * 1024 * 1024;
/* we need to keep v4l2dev, so restore it afterwards */
memset(s, 0, sizeof(*s));
......@@ -124,9 +123,9 @@ static void cx18_stream_init(struct cx18 *cx, int type)
s->handle = CX18_INVALID_TASK_HANDLE;
s->dma = cx18_stream_info[type].dma;
s->buffers = cx->stream_buffers[type];
s->buf_size = cx->stream_buf_size[type];
if (s->buf_size)
s->buffers = max_size / s->buf_size;
mutex_init(&s->qlock);
init_waitqueue_head(&s->waitq);
s->id = -1;
......@@ -162,7 +161,7 @@ static int cx18_prep_dev(struct cx18 *cx, int type)
/* User explicitly selected 0 buffers for these streams, so don't
create them. */
if (cx18_stream_info[type].dma != PCI_DMA_NONE &&
cx->options.megabytes[type] == 0) {
cx->stream_buffers[type] == 0) {
CX18_INFO("Disabled %s device\n", cx18_stream_info[type].name);
return 0;
}
......@@ -262,8 +261,9 @@ static int cx18_reg_dev(struct cx18 *cx, int type)
switch (vfl_type) {
case VFL_TYPE_GRABBER:
CX18_INFO("Registered device video%d for %s (%d MB)\n",
num, s->name, cx->options.megabytes[type]);
CX18_INFO("Registered device video%d for %s (%d x %d kB)\n",
num, s->name, cx->stream_buffers[type],
cx->stream_buf_size[type]/1024);
break;
case VFL_TYPE_RADIO:
......@@ -272,10 +272,11 @@ static int cx18_reg_dev(struct cx18 *cx, int type)
break;
case VFL_TYPE_VBI:
if (cx->options.megabytes[type])
CX18_INFO("Registered device vbi%d for %s (%d MB)\n",
num,
s->name, cx->options.megabytes[type]);
if (cx->stream_buffers[type])
CX18_INFO("Registered device vbi%d for %s "
"(%d x %d bytes)\n",
num, s->name, cx->stream_buffers[type],
cx->stream_buf_size[type]);
else
CX18_INFO("Registered device vbi%d for %s\n",
num, s->name);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment