Merge branch 'davinci-for-linus' of...

Merge branch 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci

* 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (62 commits)
  DaVinci: DM646x - platform changes for vpif capture and display drivers
  davinci: DM355 - platform changes for vpfe capture
  davinci: DM644x platform changes for vpfe capture
  davinci: audio: move tlv320aic33 i2c setup into board files
  DaVinci: EDMA: Adding 2 new APIs for allocating/freeing PARAMs
  DaVinci: DM365: Adding entries for DM365 IRQ's
  DaVinci: DM355: Adding PINMUX entries for DM355 Display
  davinci: Handle pinmux conflict between mmc/sd and nor flash
  davinci: Add NOR flash support for da850/omap-l138
  davinci: Add NAND flash support for DA850/OMAP-L138
  davinci: Add MMC/SD support for da850/omap-l138
  davinci: Add platform support for da850/omap-l138 GLCD
  davinci: Macro to convert GPIO signal to GPIO pin number
  davinci: Audio support for DA850/OMAP-L138 EVM
  davinci: Audio support for DA830 EVM
  davinci: Correct the number of GPIO pins for da850/omap-l138
  davinci: Configure MDIO pins for EMAC
  DaVinci: DM365: Add Support for new Revision of silicon
  DaVinci: DM365: Fix Compilation issue due to PINMUX entry
  DaVinci: EDMA: Updating default queue handling
  ...

MAINTAINERS

@@ -4653,6 +4653,12 @@ F:	arch/arm/mach-s3c2410/
 F:	drivers/*/*s3c2410*
 F:	drivers/*/*/*s3c2410*
 
+TI DAVINCI MACHINE SUPPORT
+P:	Kevin Hilman
+M:	davinci-linux-open-source@linux.davincidsp.com
+S:	Supported
+F:	arch/arm/mach-davinci
+
 SIS 190 ETHERNET DRIVER
 M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org

arch/arm/mach-davinci/Kconfig

@@ -6,6 +6,9 @@ config AINTC
 config CP_INTC
 	bool
 
+config ARCH_DAVINCI_DMx
+	bool
+
 menu "TI DaVinci Implementations"
 
 comment "DaVinci Core Type"
@@ -13,20 +16,41 @@ comment "DaVinci Core Type"
 config ARCH_DAVINCI_DM644x
 	bool "DaVinci 644x based system"
 	select AINTC
+	select ARCH_DAVINCI_DMx
 
 config ARCH_DAVINCI_DM355
         bool "DaVinci 355 based system"
 	select AINTC
+	select ARCH_DAVINCI_DMx
 
 config ARCH_DAVINCI_DM646x
         bool "DaVinci 646x based system"
 	select AINTC
+	select ARCH_DAVINCI_DMx
+
+config ARCH_DAVINCI_DA830
+        bool "DA830/OMAP-L137 based system"
+	select CP_INTC
+	select ARCH_DAVINCI_DA8XX
+
+config ARCH_DAVINCI_DA850
+	bool "DA850/OMAP-L138 based system"
+	select CP_INTC
+	select ARCH_DAVINCI_DA8XX
+
+config ARCH_DAVINCI_DA8XX
+	bool
+
+config ARCH_DAVINCI_DM365
+	bool "DaVinci 365 based system"
+	select AINTC
+	select ARCH_DAVINCI_DMx
 
 comment "DaVinci Board Type"
 
 config MACH_DAVINCI_EVM
 	bool "TI DM644x EVM"
-	default y
+	default ARCH_DAVINCI_DM644x
 	depends on ARCH_DAVINCI_DM644x
 	help
 	  Configure this option to specify the whether the board used
@@ -41,6 +65,7 @@ config MACH_SFFSDR
 
 config MACH_DAVINCI_DM355_EVM
 	bool "TI DM355 EVM"
+	default ARCH_DAVINCI_DM355
 	depends on ARCH_DAVINCI_DM355
 	help
 	  Configure this option to specify the whether the board used
@@ -55,11 +80,33 @@ config MACH_DM355_LEOPARD
 
 config MACH_DAVINCI_DM6467_EVM
 	bool "TI DM6467 EVM"
+	default ARCH_DAVINCI_DM646x
 	depends on ARCH_DAVINCI_DM646x
 	help
 	  Configure this option to specify the whether the board used
 	  for development is a DM6467 EVM
 
+config MACH_DAVINCI_DM365_EVM
+	bool "TI DM365 EVM"
+	default ARCH_DAVINCI_DM365
+	depends on ARCH_DAVINCI_DM365
+	help
+	  Configure this option to specify whether the board used
+	  for development is a DM365 EVM
+
+config MACH_DAVINCI_DA830_EVM
+	bool "TI DA830/OMAP-L137 Reference Platform"
+	default ARCH_DAVINCI_DA830
+	depends on ARCH_DAVINCI_DA830
+	help
+	  Say Y here to select the TI DA830/OMAP-L137 Evaluation Module.
+
+config MACH_DAVINCI_DA850_EVM
+	bool "TI DA850/OMAP-L138 Reference Platform"
+	default ARCH_DAVINCI_DA850
+	depends on ARCH_DAVINCI_DA850
+	help
+	  Say Y here to select the TI DA850/OMAP-L138 Evaluation Module.
 
 config DAVINCI_MUX
 	bool "DAVINCI multiplexing support"

arch/arm/mach-davinci/Makefile

@@ -5,14 +5,17 @@
 
 # Common objects
 obj-y 			:= time.o clock.o serial.o io.o psc.o \
-			   gpio.o devices.o dma.o usb.o common.o sram.o
+			   gpio.o dma.o usb.o common.o sram.o
 
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 
 # Chip specific
-obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o
-obj-$(CONFIG_ARCH_DAVINCI_DM355)        += dm355.o
-obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o
+obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o devices.o
+obj-$(CONFIG_ARCH_DAVINCI_DM355)        += dm355.o devices.o
+obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o devices.o
+obj-$(CONFIG_ARCH_DAVINCI_DM365)	+= dm365.o devices.o
+obj-$(CONFIG_ARCH_DAVINCI_DA830)        += da830.o devices-da8xx.o
+obj-$(CONFIG_ARCH_DAVINCI_DA850)        += da850.o devices-da8xx.o
 
 obj-$(CONFIG_AINTC)			+= irq.o
 obj-$(CONFIG_CP_INTC)			+= cp_intc.o
@@ -23,3 +26,6 @@ obj-$(CONFIG_MACH_SFFSDR)		+= board-sffsdr.o
 obj-$(CONFIG_MACH_DAVINCI_DM355_EVM)	+= board-dm355-evm.o
 obj-$(CONFIG_MACH_DM355_LEOPARD)	+= board-dm355-leopard.o
 obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM)	+= board-dm646x-evm.o
+obj-$(CONFIG_MACH_DAVINCI_DM365_EVM)	+= board-dm365-evm.o
+obj-$(CONFIG_MACH_DAVINCI_DA830_EVM)	+= board-da830-evm.o
+obj-$(CONFIG_MACH_DAVINCI_DA850_EVM)	+= board-da850-evm.o

arch/arm/mach-davinci/Makefile.boot

+ifeq ($(CONFIG_ARCH_DAVINCI_DA8XX),y)
+ifeq ($(CONFIG_ARCH_DAVINCI_DMx),y)
+$(error Cannot enable DaVinci and DA8XX platforms concurrently)
+else
+   zreladdr-y	:= 0xc0008000
+params_phys-y	:= 0xc0000100
+initrd_phys-y	:= 0xc0800000
+endif
+else
    zreladdr-y	:= 0x80008000
 params_phys-y	:= 0x80000100
 initrd_phys-y	:= 0x80800000
+endif

arch/arm/mach-davinci/board-da830-evm.c

+/*
+ * TI DA830/OMAP L137 EVM board
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ * Derived from: arch/arm/mach-davinci/board-dm644x-evm.c
+ *
+ * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <mach/cp_intc.h>
+#include <mach/da8xx.h>
+#include <mach/asp.h>
+
+#define DA830_EVM_PHY_MASK		0x0
+#define DA830_EVM_MDIO_FREQUENCY	2200000	/* PHY bus frequency */
+
+static struct at24_platform_data da830_evm_i2c_eeprom_info = {
+	.byte_len	= SZ_256K / 8,
+	.page_size	= 64,
+	.flags		= AT24_FLAG_ADDR16,
+	.setup		= davinci_get_mac_addr,
+	.context	= (void *)0x7f00,
+};
+
+static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("24c256", 0x50),
+		.platform_data	= &da830_evm_i2c_eeprom_info,
+	},
+	{
+		I2C_BOARD_INFO("tlv320aic3x", 0x18),
+	}
+};
+
+static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = {
+	.bus_freq	= 100,	/* kHz */
+	.bus_delay	= 0,	/* usec */
+};
+
+static struct davinci_uart_config da830_evm_uart_config __initdata = {
+	.enabled_uarts = 0x7,
+};
+
+static u8 da830_iis_serializer_direction[] = {
+	RX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+	INACTIVE_MODE,	TX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
+};
+
+static struct snd_platform_data da830_evm_snd_data = {
+	.tx_dma_offset  = 0x2000,
+	.rx_dma_offset  = 0x2000,
+	.op_mode        = DAVINCI_MCASP_IIS_MODE,
+	.num_serializer = ARRAY_SIZE(da830_iis_serializer_direction),
+	.tdm_slots      = 2,
+	.serial_dir     = da830_iis_serializer_direction,
+	.eventq_no      = EVENTQ_0,
+	.version	= MCASP_VERSION_2,
+	.txnumevt	= 1,
+	.rxnumevt	= 1,
+};
+
+static __init void da830_evm_init(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	int ret;
+
+	ret = da8xx_register_edma();
+	if (ret)
+		pr_warning("da830_evm_init: edma registration failed: %d\n",
+				ret);
+
+	ret = da8xx_pinmux_setup(da830_i2c0_pins);
+	if (ret)
+		pr_warning("da830_evm_init: i2c0 mux setup failed: %d\n",
+				ret);
+
+	ret = da8xx_register_i2c(0, &da830_evm_i2c_0_pdata);
+	if (ret)
+		pr_warning("da830_evm_init: i2c0 registration failed: %d\n",
+				ret);
+
+	soc_info->emac_pdata->phy_mask = DA830_EVM_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY;
+	soc_info->emac_pdata->rmii_en = 1;
+
+	ret = da8xx_pinmux_setup(da830_cpgmac_pins);
+	if (ret)
+		pr_warning("da830_evm_init: cpgmac mux setup failed: %d\n",
+				ret);
+
+	ret = da8xx_register_emac();
+	if (ret)
+		pr_warning("da830_evm_init: emac registration failed: %d\n",
+				ret);
+
+	ret = da8xx_register_watchdog();
+	if (ret)
+		pr_warning("da830_evm_init: watchdog registration failed: %d\n",
+				ret);
+
+	davinci_serial_init(&da830_evm_uart_config);
+	i2c_register_board_info(1, da830_evm_i2c_devices,
+			ARRAY_SIZE(da830_evm_i2c_devices));
+
+	ret = da8xx_pinmux_setup(da830_mcasp1_pins);
+	if (ret)
+		pr_warning("da830_evm_init: mcasp1 mux setup failed: %d\n",
+				ret);
+
+	da8xx_init_mcasp(1, &da830_evm_snd_data);
+}
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+static int __init da830_evm_console_init(void)
+{
+	return add_preferred_console("ttyS", 2, "115200");
+}
+console_initcall(da830_evm_console_init);
+#endif
+
+static __init void da830_evm_irq_init(void)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	cp_intc_init((void __iomem *)DA8XX_CP_INTC_VIRT, DA830_N_CP_INTC_IRQ,
+			soc_info->intc_irq_prios);
+}
+
+static void __init da830_evm_map_io(void)
+{
+	da830_init();
+}
+
+MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP L137 EVM")
+	.phys_io	= IO_PHYS,
+	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params	= (DA8XX_DDR_BASE + 0x100),
+	.map_io		= da830_evm_map_io,
+	.init_irq	= da830_evm_irq_init,
+	.timer		= &davinci_timer,
+	.init_machine	= da830_evm_init,
+MACHINE_END

arch/arm/mach-davinci/board-dm355-evm.c

@@ -20,6 +20,8 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/clk.h>
+#include <linux/videodev2.h>
+#include <media/tvp514x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
 
@@ -117,6 +119,8 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_delay	= 0	/* usec */,
 };
 
+static struct snd_platform_data dm355_evm_snd_data;
+
 static int dm355evm_mmc_gpios = -EINVAL;
 
 static void dm355evm_mmcsd_gpios(unsigned gpio)
@@ -134,11 +138,11 @@ static void dm355evm_mmcsd_gpios(unsigned gpio)
 }
 
 static struct i2c_board_info dm355evm_i2c_info[] = {
-	{ I2C_BOARD_INFO("dm355evm_msp", 0x25),
+	{	I2C_BOARD_INFO("dm355evm_msp", 0x25),
 		.platform_data = dm355evm_mmcsd_gpios,
-		/* plus irq */ },
-	/* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
-	/* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
+	},
+	/* { plus irq  }, */
+	{ I2C_BOARD_INFO("tlv320aic33", 0x1b), },
 };
 
 static void __init evm_init_i2c(void)
@@ -177,6 +181,72 @@ static struct platform_device dm355evm_dm9000 = {
 	.num_resources	= ARRAY_SIZE(dm355evm_dm9000_rsrc),
 };
 
+static struct tvp514x_platform_data tvp5146_pdata = {
+	.clk_polarity = 0,
+	.hs_polarity = 1,
+	.vs_polarity = 1
+};
+
+#define TVP514X_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
+/* Inputs available at the TVP5146 */
+static struct v4l2_input tvp5146_inputs[] = {
+	{
+		.index = 0,
+		.name = "Composite",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = TVP514X_STD_ALL,
+	},
+	{
+		.index = 1,
+		.name = "S-Video",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = TVP514X_STD_ALL,
+	},
+};
+
+/*
+ * this is the route info for connecting each input to decoder
+ * ouput that goes to vpfe. There is a one to one correspondence
+ * with tvp5146_inputs
+ */
+static struct vpfe_route tvp5146_routes[] = {
+	{
+		.input = INPUT_CVBS_VI2B,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+	},
+	{
+		.input = INPUT_SVIDEO_VI2C_VI1C,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+	},
+};
+
+static struct vpfe_subdev_info vpfe_sub_devs[] = {
+	{
+		.name = "tvp5146",
+		.grp_id = 0,
+		.num_inputs = ARRAY_SIZE(tvp5146_inputs),
+		.inputs = tvp5146_inputs,
+		.routes = tvp5146_routes,
+		.can_route = 1,
+		.ccdc_if_params = {
+			.if_type = VPFE_BT656,
+			.hdpol = VPFE_PINPOL_POSITIVE,
+			.vdpol = VPFE_PINPOL_POSITIVE,
+		},
+		.board_info = {
+			I2C_BOARD_INFO("tvp5146", 0x5d),
+			.platform_data = &tvp5146_pdata,
+		},
+	}
+};
+
+static struct vpfe_config vpfe_cfg = {
+	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+	.sub_devs = vpfe_sub_devs,
+	.card_name = "DM355 EVM",
+	.ccdc = "DM355 CCDC",
+};
+
 static struct platform_device *davinci_evm_devices[] __initdata = {
 	&dm355evm_dm9000,
 	&davinci_nand_device,
@@ -188,6 +258,8 @@ static struct davinci_uart_config uart_config __initdata = {
 
 static void __init dm355_evm_map_io(void)
 {
+	/* setup input configuration for VPFE input devices */
+	dm355_set_vpfe_config(&vpfe_cfg);
 	dm355_init();
 }
 
@@ -279,6 +351,9 @@ static __init void dm355_evm_init(void)
 
 	dm355_init_spi0(BIT(0), dm355_evm_spi_info,
 			ARRAY_SIZE(dm355_evm_spi_info));
+
+	/* DM335 EVM uses ASP1; line-out is a stereo mini-jack */
+	dm355_init_asp1(ASP1_TX_EVT_EN | ASP1_RX_EVT_EN, &dm355_evm_snd_data);
 }
 
 static __init void dm355_evm_irq_init(void)

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -28,6 +28,9 @@
 #include <linux/io.h>
 #include <linux/phy.h>
 #include <linux/clk.h>
+#include <linux/videodev2.h>
+
+#include <media/tvp514x.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -194,6 +197,72 @@ static struct platform_device davinci_fb_device = {
 	.num_resources = 0,
 };
 
+static struct tvp514x_platform_data tvp5146_pdata = {
+	.clk_polarity = 0,
+	.hs_polarity = 1,
+	.vs_polarity = 1
+};
+
+#define TVP514X_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
+/* Inputs available at the TVP5146 */
+static struct v4l2_input tvp5146_inputs[] = {
+	{
+		.index = 0,
+		.name = "Composite",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = TVP514X_STD_ALL,
+	},
+	{
+		.index = 1,
+		.name = "S-Video",
+		.type = V4L2_INPUT_TYPE_CAMERA,
+		.std = TVP514X_STD_ALL,
+	},
+};
+
+/*
+ * this is the route info for connecting each input to decoder
+ * ouput that goes to vpfe. There is a one to one correspondence
+ * with tvp5146_inputs
+ */
+static struct vpfe_route tvp5146_routes[] = {
+	{
+		.input = INPUT_CVBS_VI2B,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+	},
+	{
+		.input = INPUT_SVIDEO_VI2C_VI1C,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+	},
+};
+
+static struct vpfe_subdev_info vpfe_sub_devs[] = {
+	{
+		.name = "tvp5146",
+		.grp_id = 0,
+		.num_inputs = ARRAY_SIZE(tvp5146_inputs),
+		.inputs = tvp5146_inputs,
+		.routes = tvp5146_routes,
+		.can_route = 1,
+		.ccdc_if_params = {
+			.if_type = VPFE_BT656,
+			.hdpol = VPFE_PINPOL_POSITIVE,
+			.vdpol = VPFE_PINPOL_POSITIVE,
+		},
+		.board_info = {
+			I2C_BOARD_INFO("tvp5146", 0x5d),
+			.platform_data = &tvp5146_pdata,
+		},
+	},
+};
+
+static struct vpfe_config vpfe_cfg = {
+	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+	.sub_devs = vpfe_sub_devs,
+	.card_name = "DM6446 EVM",
+	.ccdc = "DM6446 CCDC",
+};
+
 static struct platform_device rtc_dev = {
 	.name           = "rtc_davinci_evm",
 	.id             = -1,
@@ -225,6 +294,8 @@ static struct platform_device ide_dev = {
 	},
 };
 
+static struct snd_platform_data dm644x_evm_snd_data;
+
 /*----------------------------------------------------------------------*/
 
 /*
@@ -557,10 +628,9 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 		I2C_BOARD_INFO("24c256", 0x50),
 		.platform_data	= &eeprom_info,
 	},
-	/* ALSO:
-	 * - tvl320aic33 audio codec (0x1b)
-	 * - tvp5146 video decoder (0x5d)
-	 */
+	{
+		I2C_BOARD_INFO("tlv320aic33", 0x1b),
+	},
 };
 
 /* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz),
@@ -590,6 +660,8 @@ static struct davinci_uart_config uart_config __initdata = {
 static void __init
 davinci_evm_map_io(void)
 {
+	/* setup input configuration for VPFE input devices */
+	dm644x_set_vpfe_config(&vpfe_cfg);
 	dm644x_init();
 }
 
@@ -666,6 +738,7 @@ static __init void davinci_evm_init(void)
 	davinci_setup_mmc(0, &dm6446evm_mmc_config);
 
 	davinci_serial_init(&uart_config);
+	dm644x_init_asp(&dm644x_evm_snd_data);
 
 	soc_info->emac_pdata->phy_mask = DM644X_EVM_PHY_MASK;
 	soc_info->emac_pdata->mdio_max_freq = DM644X_EVM_MDIO_FREQUENCY;

arch/arm/mach-davinci/clock.c

@@ -227,7 +227,10 @@ static void __init clk_pll_init(struct clk *clk)
 	if (ctrl & PLLCTL_PLLEN) {
 		bypass = 0;
 		mult = __raw_readl(pll->base + PLLM);
-		mult = (mult & PLLM_PLLM_MASK) + 1;
+		if (cpu_is_davinci_dm365())
+			mult = 2 * (mult & PLLM_PLLM_MASK);
+		else
+			mult = (mult & PLLM_PLLM_MASK) + 1;
 	} else
 		bypass = 1;
 

arch/arm/mach-davinci/devices.c

@@ -31,6 +31,8 @@
 #define DAVINCI_MMCSD0_BASE	     0x01E10000
 #define DM355_MMCSD0_BASE	     0x01E11000
 #define DM355_MMCSD1_BASE	     0x01E00000
+#define DM365_MMCSD0_BASE	     0x01D11000
+#define DM365_MMCSD1_BASE	     0x01D00000
 
 static struct resource i2c_resources[] = {
 	{
@@ -82,10 +84,10 @@ static struct resource mmcsd0_resources[] = {
 	},
 	/* DMA channels: RX, then TX */
 	{
-		.start = DAVINCI_DMA_MMCRXEVT,
+		.start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCRXEVT),
 		.flags = IORESOURCE_DMA,
 	}, {
-		.start = DAVINCI_DMA_MMCTXEVT,
+		.start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCTXEVT),
 		.flags = IORESOURCE_DMA,
 	},
 };
@@ -119,10 +121,10 @@ static struct resource mmcsd1_resources[] = {
 	},
 	/* DMA channels: RX, then TX */
 	{
-		.start = 30,	/* rx */
+		.start = EDMA_CTLR_CHAN(0, 30),	/* rx */
 		.flags = IORESOURCE_DMA,
 	}, {
-		.start = 31,	/* tx */
+		.start = EDMA_CTLR_CHAN(0, 31),	/* tx */
 		.flags = IORESOURCE_DMA,
 	},
 };
@@ -154,19 +156,31 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
 	 */
 	switch (module) {
 	case 1:
-		if (!cpu_is_davinci_dm355())
+		if (cpu_is_davinci_dm355()) {
+			/* REVISIT we may not need all these pins if e.g. this
+			 * is a hard-wired SDIO device...
+			 */
+			davinci_cfg_reg(DM355_SD1_CMD);
+			davinci_cfg_reg(DM355_SD1_CLK);
+			davinci_cfg_reg(DM355_SD1_DATA0);
+			davinci_cfg_reg(DM355_SD1_DATA1);
+			davinci_cfg_reg(DM355_SD1_DATA2);
+			davinci_cfg_reg(DM355_SD1_DATA3);
+		} else if (cpu_is_davinci_dm365()) {
+			void __iomem *pupdctl1 =
+				IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE + 0x7c);
+
+			/* Configure pull down control */
+			__raw_writel((__raw_readl(pupdctl1) & ~0x400),
+					pupdctl1);
+
+			mmcsd1_resources[0].start = DM365_MMCSD1_BASE;
+			mmcsd1_resources[0].end = DM365_MMCSD1_BASE +
+							SZ_4K - 1;
+			mmcsd0_resources[2].start = IRQ_DM365_SDIOINT1;
+		} else
 			break;
 
-		/* REVISIT we may not need all these pins if e.g. this
-		 * is a hard-wired SDIO device...
-		 */
-		davinci_cfg_reg(DM355_SD1_CMD);
-		davinci_cfg_reg(DM355_SD1_CLK);
-		davinci_cfg_reg(DM355_SD1_DATA0);
-		davinci_cfg_reg(DM355_SD1_DATA1);
-		davinci_cfg_reg(DM355_SD1_DATA2);
-		davinci_cfg_reg(DM355_SD1_DATA3);
-
 		pdev = &davinci_mmcsd1_device;
 		break;
 	case 0:
@@ -180,9 +194,12 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
 
 			/* enable RX EDMA */
 			davinci_cfg_reg(DM355_EVT26_MMC0_RX);
-		}
-
-		else if (cpu_is_davinci_dm644x()) {
+		} else if (cpu_is_davinci_dm365()) {
+			mmcsd0_resources[0].start = DM365_MMCSD0_BASE;
+			mmcsd0_resources[0].end = DM365_MMCSD0_BASE +
+							SZ_4K - 1;
+			mmcsd0_resources[2].start = IRQ_DM365_SDIOINT0;
+		} else if (cpu_is_davinci_dm644x()) {
 			/* REVISIT: should this be in board-init code? */
 			void __iomem *base =
 				IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
@@ -216,6 +233,8 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
 
 static struct resource wdt_resources[] = {
 	{
+		.start	= DAVINCI_WDOG_BASE,
+		.end	= DAVINCI_WDOG_BASE + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 };
@@ -229,11 +248,6 @@ struct platform_device davinci_wdt_device = {
 
 static void davinci_init_wdt(void)
 {
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
-
-	wdt_resources[0].start = (resource_size_t)soc_info->wdt_base;
-	wdt_resources[0].end = (resource_size_t)soc_info->wdt_base + SZ_1K - 1;
-
 	platform_device_register(&davinci_wdt_device);
 }
 

arch/arm/mach-davinci/include/mach/common.h

@@ -60,10 +60,10 @@ struct davinci_soc_info {
 	u8				*intc_irq_prios;
 	unsigned long			intc_irq_num;
 	struct davinci_timer_info	*timer_info;
-	void __iomem			*wdt_base;
 	void __iomem			*gpio_base;
 	unsigned			gpio_num;
 	unsigned			gpio_irq;
+	unsigned			gpio_unbanked;
 	struct platform_device		*serial_dev;
 	struct emac_platform_data	*emac_pdata;
 	dma_addr_t			sram_dma;

arch/arm/mach-davinci/include/mach/vmalloc.h

@@ -8,7 +8,7 @@
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */
-#include <mach/io.h>
+#include <mach/hardware.h>
 
 /* Allow vmalloc range until the IO virtual range minus a 2M "hole" */
 #define VMALLOC_END	  (IO_VIRT - (2<<20))