Merge tag 'acpi-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA kernel code to upstream revision 20210730,
  clean up the ACPI companion binding code, optimize the I2C handling in
  the XPower PMIC driver, add 16550-compatible Serial Port Subtype
  support to the SPCR parsing code, add a few LoongArch support bits,
  add a ne quirk to the button driver, add new PCH FIVR methods to the
  DPTF code, replace deprecated CPU-hotplug functions in the processor
  driver, improve the acpi_os_map_memory() handling on non-x86 and do
  some assorted cleanups.

  Specifics:

   - Update ACPICA code in the kernel to upstream revision 20210730
     including the following changes:
       - Add support for the AEST table (data compiler) to iASL (Bob
         Moore)
       - Fix an if statement (add parens) (Bob Moore)
       - Drop trailing semicolon from some macros (Bob Moore)
       - Fix compilation of WPBT table with no command-line arguments in
         iASL (Bob Moore)
       - Add method name "_DIS" for use with aslmethod.c (Bob Moore)
       - Add new DBG2 Serial Port Subtypes (Marcin Wojtas)

   - Add new PCH FIVR methods to the DPTF code (Srinivas Pandruvada)

   - Add support for the new 16550-compatible Serial Port Subtype to the
     SPCR table parsing code (Marcin Wojtas)

   - Add DMI quirk for Lenovo Yoga 9 (14INTL5) to the ACPI button driver
     (Ulrich Huber)

   - Add LoongArch support for ACPI_PROCESSOR/ACPI_NUMA (Huacai Chen)

   - Add memory semantics to acpi_os_map_memory() (Lorenzo Pieralisi)

   - Replace deprecated CPU-hotplug functions in the ACPI processor
     driver (Sebastian Andrzej Siewior)

   - Optimize I2C-bus handling in the XPower PMIC driver (Hans de Goede)

   - Make platform-profile catch profile changes initiated by user space
     and notify user processes of them (Hans de Goede)

   - Clean up the ACPI companion binding and unbinding code and update
     debug messaging in the ACPI power resources code (Rafael Wysocki)

   - Clean up a couple of code pieces related to configfs (Andy
     Shevchenko)

   - Rearrange the FPDT table parsing code to avoid printing warning
     messages for reserved record types (Adrian Huang)"

* tag 'acpi-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits)
  ACPI: power: Drop name from struct acpi_power_resource
  ACPI: power: Use acpi_handle_debug() to print debug messages
  ACPI: tables: FPDT: Do not print FW_BUG message if record types are reserved
  ACPI: button: Add DMI quirk for Lenovo Yoga 9 (14INTL5)
  ACPI: Add memory semantics to acpi_os_map_memory()
  ACPI: SPCR: Add support for the new 16550-compatible Serial Port Subtype
  ACPI: platform-profile: call sysfs_notify() from platform_profile_store()
  ACPICA: Update version to 20210730
  ACPICA: Add method name "_DIS" For use with aslmethod.c
  ACPICA: iASL: Fix for WPBT table with no command-line arguments
  ACPICA: Headers: Add new DBG2 Serial Port Subtypes
  ACPICA: Macros should not use a trailing semicolon
  ACPICA: Fix an if statement (add parens)
  ACPICA: iASL: Add support for the AEST table (data compiler)
  ACPI: processor: Replace deprecated CPU-hotplug functions
  ACPI: DPTF: Add new PCH FIVR methods
  ACPI: configfs: Make get_header() to return error pointer
  ACPI: configfs: Use sysfs_emit() in "show" functions
  driver core: Split device_platform_notify()
  software nodes: Split software_node_notify()
  ...

Documentation/ABI/testing/sysfs-platform-dptf

@@ -111,3 +111,43 @@ Contact:	linux-acpi@vger.kernel.org
 Description:
 		(RW) The PCH FIVR (Fully Integrated Voltage Regulator) switching frequency in MHz,
 		when FIVR clock is 38.4MHz.
+
+What:		/sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/fivr_switching_freq_mhz
+Date:		September, 2021
+KernelVersion:	v5.15
+Contact:	linux-acpi@vger.kernel.org
+Description:
+		(RO) Get the FIVR switching control frequency in MHz.
+
+What:		/sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/fivr_switching_fault_status
+Date:		September, 2021
+KernelVersion:	v5.15
+Contact:	linux-acpi@vger.kernel.org
+Description:
+		(RO) Read the FIVR switching frequency control fault status.
+
+What:		/sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/ssc_clock_info
+Date:		September, 2021
+KernelVersion:	v5.15
+Contact:	linux-acpi@vger.kernel.org
+Description:
+		(RO) Presents SSC (spread spectrum clock) information for EMI
+		(Electro magnetic interference) control. This is a bit mask.
+		Bits	Description
+		[7:0]	Sets clock spectrum spread percentage:
+			0x00=0.2% , 0x3F=10%
+			1 LSB = 0.1% increase in spread (for
+			settings 0x01 thru 0x1C)
+			1 LSB = 0.2% increase in spread (for
+			settings 0x1E thru 0x3F)
+		[8]	When set to 1, enables spread
+			spectrum clock
+		[9]	0: Triangle mode. FFC frequency
+			walks around the Fcenter in a linear
+			fashion
+			1: Random walk mode. FFC frequency
+			changes randomly within the SSC
+			(Spread spectrum clock) range
+		[10]	0: No white noise. 1: Add white noise
+			to spread waveform
+		[11]	When 1, future writes are ignored.

Documentation/ABI/testing/sysfs-platform_profile

@@ -26,3 +26,10 @@ Contact:	Hans de Goede <hdegoede@redhat.com>
 Description:	Reading this file gives the current selected profile for this
 		device. Writing this file with one of the strings from
 		platform_profile_choices changes the profile to the new value.
+
+		This file can be monitored for changes by polling for POLLPRI,
+		POLLPRI will be signalled on any changes, independent of those
+		changes coming from a userspace write; or coming from another
+		source such as e.g. a hotkey triggered profile change handled
+		either directly by the embedded-controller or fully handled
+		inside the kernel.

arch/arm64/include/asm/acpi.h

@@ -50,6 +50,9 @@ pgprot_t __acpi_get_mem_attribute(phys_addr_t addr);
 void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size);
 #define acpi_os_ioremap acpi_os_ioremap
 
+void __iomem *acpi_os_memmap(acpi_physical_address phys, acpi_size size);
+#define acpi_os_memmap acpi_os_memmap
+
 typedef u64 phys_cpuid_t;
 #define PHYS_CPUID_INVALID INVALID_HWID
 

arch/arm64/kernel/acpi.c

@@ -273,7 +273,8 @@ pgprot_t __acpi_get_mem_attribute(phys_addr_t addr)
 	return __pgprot(PROT_DEVICE_nGnRnE);
 }
 
-void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size)
+static void __iomem *__acpi_os_ioremap(acpi_physical_address phys,
+				       acpi_size size, bool memory)
 {
 	efi_memory_desc_t *md, *region = NULL;
 	pgprot_t prot;
@@ -299,9 +300,11 @@ void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size)
 	 * It is fine for AML to remap regions that are not represented in the
 	 * EFI memory map at all, as it only describes normal memory, and MMIO
 	 * regions that require a virtual mapping to make them accessible to
-	 * the EFI runtime services.
+	 * the EFI runtime services. Determine the region default
+	 * attributes by checking the requested memory semantics.
 	 */
-	prot = __pgprot(PROT_DEVICE_nGnRnE);
+	prot = memory ? __pgprot(PROT_NORMAL_NC) :
+			__pgprot(PROT_DEVICE_nGnRnE);
 	if (region) {
 		switch (region->type) {
 		case EFI_LOADER_CODE:
@@ -361,6 +364,16 @@ void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size)
 	return __ioremap(phys, size, prot);
 }
 
+void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size)
+{
+	return __acpi_os_ioremap(phys, size, false);
+}
+
+void __iomem *acpi_os_memmap(acpi_physical_address phys, acpi_size size)
+{
+	return __acpi_os_ioremap(phys, size, true);
+}
+
 /*
  * Claim Synchronous External Aborts as a firmware first notification.
  *

drivers/acpi/Kconfig

@@ -280,9 +280,9 @@ config ACPI_CPPC_LIB
 
 config ACPI_PROCESSOR
 	tristate "Processor"
-	depends on X86 || IA64 || ARM64
+	depends on X86 || IA64 || ARM64 || LOONGARCH
 	select ACPI_PROCESSOR_IDLE
-	select ACPI_CPU_FREQ_PSS if X86 || IA64
+	select ACPI_CPU_FREQ_PSS if X86 || IA64 || LOONGARCH
 	default y
 	help
 	  This driver adds support for the ACPI Processor package. It is required

drivers/acpi/acpi_configfs.c

@@ -70,7 +70,7 @@ static inline struct acpi_table_header *get_header(struct config_item *cfg)
 	if (!table->header)
 		pr_err("table not loaded\n");
 
-	return table->header;
+	return table->header ?: ERR_PTR(-EINVAL);
 }
 
 static ssize_t acpi_table_aml_read(struct config_item *cfg,
@@ -78,8 +78,8 @@ static ssize_t acpi_table_aml_read(struct config_item *cfg,
 {
 	struct acpi_table_header *h = get_header(cfg);
 
-	if (!h)
-		return -EINVAL;
+	if (IS_ERR(h))
+		return PTR_ERR(h);
 
 	if (data)
 		memcpy(data, h, h->length);
@@ -100,60 +100,60 @@ static ssize_t acpi_table_signature_show(struct config_item *cfg, char *str)
 {
 	struct acpi_table_header *h = get_header(cfg);
 
-	if (!h)
-		return -EINVAL;
+	if (IS_ERR(h))
+		return PTR_ERR(h);
 
-	return sprintf(str, "%.*s\n", ACPI_NAMESEG_SIZE, h->signature);
+	return sysfs_emit(str, "%.*s\n", ACPI_NAMESEG_SIZE, h->signature);
 }
 
 static ssize_t acpi_table_length_show(struct config_item *cfg, char *str)
 {
 	struct acpi_table_header *h = get_header(cfg);
 
-	if (!h)
-		return -EINVAL;
+	if (IS_ERR(h))
+		return PTR_ERR(h);
 
-	return sprintf(str, "%d\n", h->length);
+	return sysfs_emit(str, "%d\n", h->length);
 }
 
 static ssize_t acpi_table_revision_show(struct config_item *cfg, char *str)
 {
 	struct acpi_table_header *h = get_header(cfg);
 
-	if (!h)
-		return -EINVAL;
+	if (IS_ERR(h))
+		return PTR_ERR(h);
 
-	return sprintf(str, "%d\n", h->revision);
+	return sysfs_emit(str, "%d\n", h->revision);
 }
 
 static ssize_t acpi_table_oem_id_show(struct config_item *cfg, char *str)
 {
 	struct acpi_table_header *h = get_header(cfg);
 
-	if (!h)
-		return -EINVAL;
+	if (IS_ERR(h))
+		return PTR_ERR(h);
 
-	return sprintf(str, "%.*s\n", ACPI_OEM_ID_SIZE, h->oem_id);
+	return sysfs_emit(str, "%.*s\n", ACPI_OEM_ID_SIZE, h->oem_id);
 }
 
 static ssize_t acpi_table_oem_table_id_show(struct config_item *cfg, char *str)
 {
 	struct acpi_table_header *h = get_header(cfg);
 
-	if (!h)
-		return -EINVAL;
+	if (IS_ERR(h))
+		return PTR_ERR(h);
 
-	return sprintf(str, "%.*s\n", ACPI_OEM_TABLE_ID_SIZE, h->oem_table_id);
+	return sysfs_emit(str, "%.*s\n", ACPI_OEM_TABLE_ID_SIZE, h->oem_table_id);
 }
 
 static ssize_t acpi_table_oem_revision_show(struct config_item *cfg, char *str)
 {
 	struct acpi_table_header *h = get_header(cfg);
 
-	if (!h)
-		return -EINVAL;
+	if (IS_ERR(h))
+		return PTR_ERR(h);
 
-	return sprintf(str, "%d\n", h->oem_revision);
+	return sysfs_emit(str, "%d\n", h->oem_revision);
 }
 
 static ssize_t acpi_table_asl_compiler_id_show(struct config_item *cfg,
@@ -161,10 +161,10 @@ static ssize_t acpi_table_asl_compiler_id_show(struct config_item *cfg,
 {
 	struct acpi_table_header *h = get_header(cfg);
 
-	if (!h)
-		return -EINVAL;
+	if (IS_ERR(h))
+		return PTR_ERR(h);
 
-	return sprintf(str, "%.*s\n", ACPI_NAMESEG_SIZE, h->asl_compiler_id);
+	return sysfs_emit(str, "%.*s\n", ACPI_NAMESEG_SIZE, h->asl_compiler_id);
 }
 
 static ssize_t acpi_table_asl_compiler_revision_show(struct config_item *cfg,
@@ -172,10 +172,10 @@ static ssize_t acpi_table_asl_compiler_revision_show(struct config_item *cfg,
 {
 	struct acpi_table_header *h = get_header(cfg);
 
-	if (!h)
-		return -EINVAL;
+	if (IS_ERR(h))
+		return PTR_ERR(h);
 
-	return sprintf(str, "%d\n", h->asl_compiler_revision);
+	return sysfs_emit(str, "%d\n", h->asl_compiler_revision);
 }
 
 CONFIGFS_ATTR_RO(acpi_table_, signature);

drivers/acpi/acpi_fpdt.c

@@ -220,8 +220,8 @@ static int fpdt_process_subtable(u64 address, u32 subtable_type)
 			break;
 
 		default:
-			pr_err(FW_BUG "Invalid record %d found.\n", record_header->type);
-			return -EINVAL;
+			/* Other types are reserved in ACPI 6.4 spec. */
+			break;
 		}
 	}
 	return 0;
@@ -254,8 +254,7 @@ static int __init acpi_init_fpdt(void)
 					      subtable->type);
 			break;
 		default:
-			pr_info(FW_BUG "Invalid subtable type %d found.\n",
-			       subtable->type);
+			/* Other types are reserved in ACPI 6.4 spec. */
 			break;
 		}
 		offset += sizeof(*subtable);

drivers/acpi/acpi_pad.c

@@ -249,12 +249,12 @@ static void set_power_saving_task_num(unsigned int num)
 
 static void acpi_pad_idle_cpus(unsigned int num_cpus)
 {
-	get_online_cpus();
+	cpus_read_lock();
 
 	num_cpus = min_t(unsigned int, num_cpus, num_online_cpus());
 	set_power_saving_task_num(num_cpus);
 
-	put_online_cpus();
+	cpus_read_unlock();
 }
 
 static uint32_t acpi_pad_idle_cpus_num(void)

drivers/acpi/acpi_processor.c

@@ -182,7 +182,7 @@ static int acpi_processor_hotadd_init(struct acpi_processor *pr)
 		return -ENODEV;
 
 	cpu_maps_update_begin();
-	cpu_hotplug_begin();
+	cpus_write_lock();
 
 	ret = acpi_map_cpu(pr->handle, pr->phys_id, pr->acpi_id, &pr->id);
 	if (ret)
@@ -203,7 +203,7 @@ static int acpi_processor_hotadd_init(struct acpi_processor *pr)
 	pr->flags.need_hotplug_init = 1;
 
 out:
-	cpu_hotplug_done();
+	cpus_write_unlock();
 	cpu_maps_update_done();
 	return ret;
 }
@@ -454,13 +454,13 @@ static void acpi_processor_remove(struct acpi_device *device)
 	per_cpu(processors, pr->id) = NULL;
 
 	cpu_maps_update_begin();
-	cpu_hotplug_begin();
+	cpus_write_lock();
 
 	/* Remove the CPU. */
 	arch_unregister_cpu(pr->id);
 	acpi_unmap_cpu(pr->id);
 
-	cpu_hotplug_done();
+	cpus_write_unlock();
 	cpu_maps_update_done();
 
 	try_offline_node(cpu_to_node(pr->id));

drivers/acpi/acpica/dswexec.c

@@ -561,11 +561,10 @@ acpi_status acpi_ds_exec_end_op(struct acpi_walk_state *walk_state)
 								op->common.
 								node->object,
 								NULL);
-				if ACPI_FAILURE
-					(status) {
+				if (ACPI_FAILURE(status)) {
 					ACPI_EXCEPTION((AE_INFO, status,
 							"While writing to buffer field"));
-					}
+				}
 			}
 			ACPI_FREE(namepath);
 			status = AE_OK;

drivers/acpi/bus.c

@@ -498,24 +498,24 @@ static void acpi_bus_notify(acpi_handle handle, u32 type, void *data)
 	acpi_evaluate_ost(handle, type, ost_code, NULL);
 }
 
-static void acpi_device_notify(acpi_handle handle, u32 event, void *data)
+static void acpi_notify_device(acpi_handle handle, u32 event, void *data)
 {
 	struct acpi_device *device = data;
 
 	device->driver->ops.notify(device, event);
 }
 
-static void acpi_device_notify_fixed(void *data)
+static void acpi_notify_device_fixed(void *data)
 {
 	struct acpi_device *device = data;
 
 	/* Fixed hardware devices have no handles */
-	acpi_device_notify(NULL, ACPI_FIXED_HARDWARE_EVENT, device);
+	acpi_notify_device(NULL, ACPI_FIXED_HARDWARE_EVENT, device);
 }
 
 static u32 acpi_device_fixed_event(void *data)
 {
-	acpi_os_execute(OSL_NOTIFY_HANDLER, acpi_device_notify_fixed, data);
+	acpi_os_execute(OSL_NOTIFY_HANDLER, acpi_notify_device_fixed, data);
 	return ACPI_INTERRUPT_HANDLED;
 }
 
@@ -536,7 +536,7 @@ static int acpi_device_install_notify_handler(struct acpi_device *device)
 	else
 		status = acpi_install_notify_handler(device->handle,
 						     ACPI_DEVICE_NOTIFY,
-						     acpi_device_notify,
+						     acpi_notify_device,
 						     device);
 
 	if (ACPI_FAILURE(status))
@@ -554,7 +554,7 @@ static void acpi_device_remove_notify_handler(struct acpi_device *device)
 						acpi_device_fixed_event);
 	else
 		acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY,
-					   acpi_device_notify);
+					   acpi_notify_device);
 }
 
 /* Handle events targeting \_SB device (at present only graceful shutdown) */

drivers/acpi/button.c

@@ -77,6 +77,17 @@ static const struct dmi_system_id dmi_lid_quirks[] = {
 		},
 		.driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_DISABLED,
 	},
+	{
+		/*
+		 * Lenovo Yoga 9 14ITL5, initial notification of the LID device
+		 * never happens.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "82BG"),
+		},
+		.driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_OPEN,
+	},
 	{
 		/*
 		 * Medion Akoya E2215T, notification of the LID device only

drivers/acpi/dptf/dptf_pch_fivr.c

@@ -90,15 +90,24 @@ static ssize_t name##_store(struct device *dev,\
 
 PCH_FIVR_SHOW(freq_mhz_low_clock, GFC0)
 PCH_FIVR_SHOW(freq_mhz_high_clock, GFC1)
+PCH_FIVR_SHOW(ssc_clock_info, GEMI)
+PCH_FIVR_SHOW(fivr_switching_freq_mhz, GFCS)
+PCH_FIVR_SHOW(fivr_switching_fault_status, GFFS)
 PCH_FIVR_STORE(freq_mhz_low_clock, RFC0)
 PCH_FIVR_STORE(freq_mhz_high_clock, RFC1)
 
 static DEVICE_ATTR_RW(freq_mhz_low_clock);
 static DEVICE_ATTR_RW(freq_mhz_high_clock);
+static DEVICE_ATTR_RO(ssc_clock_info);
+static DEVICE_ATTR_RO(fivr_switching_freq_mhz);
+static DEVICE_ATTR_RO(fivr_switching_fault_status);
 
 static struct attribute *fivr_attrs[] = {
 	&dev_attr_freq_mhz_low_clock.attr,
 	&dev_attr_freq_mhz_high_clock.attr,
+	&dev_attr_ssc_clock_info.attr,
+	&dev_attr_fivr_switching_freq_mhz.attr,
+	&dev_attr_fivr_switching_fault_status.attr,
 	NULL
 };
 

drivers/acpi/glue.c

@@ -285,29 +285,27 @@ int acpi_unbind_one(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(acpi_unbind_one);
 
-static int acpi_device_notify(struct device *dev)
+void acpi_device_notify(struct device *dev)
 {
 	struct acpi_bus_type *type = acpi_get_bus_type(dev);
 	struct acpi_device *adev;
 	int ret;
 
 	ret = acpi_bind_one(dev, NULL);
-	if (ret && type) {
-		struct acpi_device *adev;
+	if (ret) {
+		if (!type)
+			goto err;
 
 		adev = type->find_companion(dev);
 		if (!adev) {
-			pr_debug("Unable to get handle for %s\n", dev_name(dev));
-			ret = -ENODEV;
-			goto out;
+			dev_dbg(dev, "ACPI companion not found\n");
+			goto err;
 		}
 		ret = acpi_bind_one(dev, adev);
 		if (ret)
-			goto out;
+			goto err;
 	}
 	adev = ACPI_COMPANION(dev);
-	if (!adev)
-		goto out;
 
 	if (dev_is_platform(dev))
 		acpi_configure_pmsi_domain(dev);
@@ -317,27 +315,22 @@ static int acpi_device_notify(struct device *dev)
 	else if (adev->handler && adev->handler->bind)
 		adev->handler->bind(dev);
 
- out:
-	if (!ret) {
-		struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	acpi_handle_debug(ACPI_HANDLE(dev), "Bound to device %s\n",
+			  dev_name(dev));
 
-		acpi_get_name(ACPI_HANDLE(dev), ACPI_FULL_PATHNAME, &buffer);
-		pr_debug("Device %s -> %s\n", dev_name(dev), (char *)buffer.pointer);
-		kfree(buffer.pointer);
-	} else {
-		pr_debug("Device %s -> No ACPI support\n", dev_name(dev));
-	}
+	return;
 
-	return ret;
+err:
+	dev_dbg(dev, "No ACPI support\n");
 }
 
-static int acpi_device_notify_remove(struct device *dev)
+void acpi_device_notify_remove(struct device *dev)
 {
 	struct acpi_device *adev = ACPI_COMPANION(dev);
 	struct acpi_bus_type *type;
 
 	if (!adev)
-		return 0;
+		return;
 
 	type = acpi_get_bus_type(dev);
 	if (type && type->cleanup)
@@ -346,20 +339,4 @@ static int acpi_device_notify_remove(struct device *dev)
 		adev->handler->unbind(dev);
 
 	acpi_unbind_one(dev);
-	return 0;
-}
-
-int acpi_platform_notify(struct device *dev, enum kobject_action action)
-{
-	switch (action) {
-	case KOBJ_ADD:
-		acpi_device_notify(dev);
-		break;
-	case KOBJ_REMOVE:
-		acpi_device_notify_remove(dev);
-		break;
-	default:
-		break;
-	}
-	return 0;
 }

drivers/acpi/numa/Kconfig

@@ -2,7 +2,7 @@
 config ACPI_NUMA
 	bool "NUMA support"
 	depends on NUMA
-	depends on (X86 || IA64 || ARM64)
+	depends on (X86 || IA64 || ARM64 || LOONGARCH)
 	default y if IA64 || ARM64
 
 config ACPI_HMAT

drivers/acpi/numa/srat.c

@@ -206,7 +206,7 @@ int __init srat_disabled(void)
 	return acpi_numa < 0;
 }
 
-#if defined(CONFIG_X86) || defined(CONFIG_ARM64)
+#if defined(CONFIG_X86) || defined(CONFIG_ARM64) || defined(CONFIG_LOONGARCH)
 /*
  * Callback for SLIT parsing.  pxm_to_node() returns NUMA_NO_NODE for
  * I/O localities since SRAT does not list them.  I/O localities are

drivers/acpi/osl.c

@@ -284,7 +284,8 @@ acpi_map_lookup_virt(void __iomem *virt, acpi_size size)
 #define should_use_kmap(pfn)   page_is_ram(pfn)
 #endif
 
-static void __iomem *acpi_map(acpi_physical_address pg_off, unsigned long pg_sz)
+static void __iomem *acpi_map(acpi_physical_address pg_off, unsigned long pg_sz,
+			      bool memory)
 {
 	unsigned long pfn;
 
@@ -294,7 +295,8 @@ static void __iomem *acpi_map(acpi_physical_address pg_off, unsigned long pg_sz)
 			return NULL;
 		return (void __iomem __force *)kmap(pfn_to_page(pfn));
 	} else
-		return acpi_os_ioremap(pg_off, pg_sz);
+		return memory ? acpi_os_memmap(pg_off, pg_sz) :
+				acpi_os_ioremap(pg_off, pg_sz);
 }
 
 static void acpi_unmap(acpi_physical_address pg_off, void __iomem *vaddr)
@@ -309,9 +311,10 @@ static void acpi_unmap(acpi_physical_address pg_off, void __iomem *vaddr)
 }
 
 /**
- * acpi_os_map_iomem - Get a virtual address for a given physical address range.
+ * __acpi_os_map_iomem - Get a virtual address for a given physical address range.
  * @phys: Start of the physical address range to map.
  * @size: Size of the physical address range to map.
+ * @memory: true if remapping memory, false if IO
  *
  * Look up the given physical address range in the list of existing ACPI memory
  * mappings.  If found, get a reference to it and return a pointer to it (its
@@ -321,8 +324,8 @@ static void acpi_unmap(acpi_physical_address pg_off, void __iomem *vaddr)
  * During early init (when acpi_permanent_mmap has not been set yet) this
  * routine simply calls __acpi_map_table() to get the job done.
  */
-void __iomem __ref
-*acpi_os_map_iomem(acpi_physical_address phys, acpi_size size)
+static void __iomem __ref
+*__acpi_os_map_iomem(acpi_physical_address phys, acpi_size size, bool memory)
 {
 	struct acpi_ioremap *map;
 	void __iomem *virt;
@@ -353,7 +356,7 @@ void __iomem __ref
 
 	pg_off = round_down(phys, PAGE_SIZE);
 	pg_sz = round_up(phys + size, PAGE_SIZE) - pg_off;
-	virt = acpi_map(phys, size);
+	virt = acpi_map(phys, size, memory);
 	if (!virt) {
 		mutex_unlock(&acpi_ioremap_lock);
 		kfree(map);
@@ -372,11 +375,17 @@ void __iomem __ref
 	mutex_unlock(&acpi_ioremap_lock);
 	return map->virt + (phys - map->phys);
 }
+
+void __iomem *__ref
+acpi_os_map_iomem(acpi_physical_address phys, acpi_size size)
+{
+	return __acpi_os_map_iomem(phys, size, false);
+}
 EXPORT_SYMBOL_GPL(acpi_os_map_iomem);
 
 void *__ref acpi_os_map_memory(acpi_physical_address phys, acpi_size size)
 {
-	return (void *)acpi_os_map_iomem(phys, size);
+	return (void *)__acpi_os_map_iomem(phys, size, true);
 }
 EXPORT_SYMBOL_GPL(acpi_os_map_memory);
 

drivers/acpi/platform_profile.c

@@ -106,6 +106,9 @@ static ssize_t platform_profile_store(struct device *dev,
 	}
 
 	err = cur_profile->profile_set(cur_profile, i);
+	if (!err)
+		sysfs_notify(acpi_kobj, NULL, "platform_profile");
+
 	mutex_unlock(&profile_lock);
 	if (err)
 		return err;

drivers/acpi/pmic/intel_pmic_xpower.c

@@ -178,15 +178,17 @@ static int intel_xpower_pmic_update_power(struct regmap *regmap, int reg,
 {
 	int data, ret;
 
-	/* GPIO1 LDO regulator needs special handling */
-	if (reg == XPOWER_GPI1_CTRL)
-		return regmap_update_bits(regmap, reg, GPI1_LDO_MASK,
-					  on ? GPI1_LDO_ON : GPI1_LDO_OFF);
-
 	ret = iosf_mbi_block_punit_i2c_access();
 	if (ret)
 		return ret;
 
+	/* GPIO1 LDO regulator needs special handling */
+	if (reg == XPOWER_GPI1_CTRL) {
+		ret = regmap_update_bits(regmap, reg, GPI1_LDO_MASK,
+					 on ? GPI1_LDO_ON : GPI1_LDO_OFF);
+		goto out;
+	}
+
 	if (regmap_read(regmap, reg, &data)) {
 		ret = -EIO;
 		goto out;
@@ -234,6 +236,11 @@ static int intel_xpower_pmic_get_raw_temp(struct regmap *regmap, int reg)
 		return ret;
 
 	if (adc_ts_pin_ctrl & AXP288_ADC_TS_CURRENT_ON_OFF_MASK) {
+		/*
+		 * AXP288_ADC_TS_PIN_CTRL reads are cached by the regmap, so
+		 * this does to a single I2C-transfer, and thus there is no
+		 * need to explicitly call iosf_mbi_block_punit_i2c_access().
+		 */
 		ret = regmap_update_bits(regmap, AXP288_ADC_TS_PIN_CTRL,
 					 AXP288_ADC_TS_CURRENT_ON_OFF_MASK,
 					 AXP288_ADC_TS_CURRENT_ON_ONDEMAND);
@@ -244,6 +251,10 @@ static int intel_xpower_pmic_get_raw_temp(struct regmap *regmap, int reg)
 		usleep_range(6000, 10000);
 	}
 
+	ret = iosf_mbi_block_punit_i2c_access();
+	if (ret)
+		return ret;
+
 	ret = regmap_bulk_read(regmap, AXP288_GP_ADC_H, buf, 2);
 	if (ret == 0)
 		ret = (buf[0] << 4) + ((buf[1] >> 4) & 0x0f);
@@ -254,6 +265,31 @@ static int intel_xpower_pmic_get_raw_temp(struct regmap *regmap, int reg)
 				   AXP288_ADC_TS_CURRENT_ON);
 	}
 
+	iosf_mbi_unblock_punit_i2c_access();
+
+	return ret;
+}
+
+static int intel_xpower_exec_mipi_pmic_seq_element(struct regmap *regmap,
+						   u16 i2c_address, u32 reg_address,
+						   u32 value, u32 mask)
+{
+	int ret;
+
+	if (i2c_address != 0x34) {
+		pr_err("%s: Unexpected i2c-addr: 0x%02x (reg-addr 0x%x value 0x%x mask 0x%x)\n",
+		       __func__, i2c_address, reg_address, value, mask);
+		return -ENXIO;
+	}
+
+	ret = iosf_mbi_block_punit_i2c_access();
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(regmap, reg_address, mask, value);
+
+	iosf_mbi_unblock_punit_i2c_access();
+
 	return ret;
 }
 
@@ -261,6 +297,7 @@ static struct intel_pmic_opregion_data intel_xpower_pmic_opregion_data = {
 	.get_power = intel_xpower_pmic_get_power,
 	.update_power = intel_xpower_pmic_update_power,
 	.get_raw_temp = intel_xpower_pmic_get_raw_temp,
+	.exec_mipi_pmic_seq_element = intel_xpower_exec_mipi_pmic_seq_element,
 	.power_table = power_table,
 	.power_table_count = ARRAY_SIZE(power_table),
 	.thermal_table = thermal_table,

drivers/acpi/power.c

@@ -48,7 +48,6 @@ struct acpi_power_dependent_device {
 struct acpi_power_resource {
 	struct acpi_device device;
 	struct list_head list_node;
-	char *name;
 	u32 system_level;
 	u32 order;
 	unsigned int ref_count;
@@ -70,6 +69,11 @@ static DEFINE_MUTEX(power_resource_list_lock);
                              Power Resource Management
    -------------------------------------------------------------------------- */
 
+static inline const char *resource_dev_name(struct acpi_power_resource *pr)
+{
+	return dev_name(&pr->device.dev);
+}
+
 static inline
 struct acpi_power_resource *to_power_resource(struct acpi_device *device)
 {
@@ -264,7 +268,8 @@ acpi_power_resource_add_dependent(struct acpi_power_resource *resource,
 
 	dep->dev = dev;
 	list_add_tail(&dep->node, &resource->dependents);
-	dev_dbg(dev, "added power dependency to [%s]\n", resource->name);
+	dev_dbg(dev, "added power dependency to [%s]\n",
+		resource_dev_name(resource));
 
 unlock:
 	mutex_unlock(&resource->resource_lock);
@@ -283,7 +288,7 @@ acpi_power_resource_remove_dependent(struct acpi_power_resource *resource,
 			list_del(&dep->node);
 			kfree(dep);
 			dev_dbg(dev, "removed power dependency to [%s]\n",
-				resource->name);
+				resource_dev_name(resource));
 			break;
 		}
 	}
@@ -356,10 +361,11 @@ void acpi_device_power_remove_dependent(struct acpi_device *adev,
 
 static int __acpi_power_on(struct acpi_power_resource *resource)
 {
+	acpi_handle handle = resource->device.handle;
 	struct acpi_power_dependent_device *dep;
 	acpi_status status = AE_OK;
 
-	status = acpi_evaluate_object(resource->device.handle, "_ON", NULL, NULL);
+	status = acpi_evaluate_object(handle, "_ON", NULL, NULL);
 	if (ACPI_FAILURE(status)) {
 		resource->state = ACPI_POWER_RESOURCE_STATE_UNKNOWN;
 		return -ENODEV;
@@ -367,7 +373,7 @@ static int __acpi_power_on(struct acpi_power_resource *resource)
 
 	resource->state = ACPI_POWER_RESOURCE_STATE_ON;
 
-	pr_debug("Power resource [%s] turned on\n", resource->name);
+	acpi_handle_debug(handle, "Power resource turned on\n");
 
 	/*
 	 * If there are other dependents on this power resource we need to
@@ -380,7 +386,7 @@ static int __acpi_power_on(struct acpi_power_resource *resource)
 
 	list_for_each_entry(dep, &resource->dependents, node) {
 		dev_dbg(dep->dev, "runtime resuming because [%s] turned on\n",
-			resource->name);
+			resource_dev_name(resource));
 		pm_request_resume(dep->dev);
 	}
 
@@ -392,7 +398,8 @@ static int acpi_power_on_unlocked(struct acpi_power_resource *resource)
 	int result = 0;
 
 	if (resource->ref_count++) {
-		pr_debug("Power resource [%s] already on\n", resource->name);
+		acpi_handle_debug(resource->device.handle,
+				  "Power resource already on\n");
 	} else {
 		result = __acpi_power_on(resource);
 		if (result)
@@ -413,10 +420,10 @@ static int acpi_power_on(struct acpi_power_resource *resource)
 
 static int __acpi_power_off(struct acpi_power_resource *resource)
 {
+	acpi_handle handle = resource->device.handle;
 	acpi_status status;
 
-	status = acpi_evaluate_object(resource->device.handle, "_OFF",
-				      NULL, NULL);
+	status = acpi_evaluate_object(handle, "_OFF", NULL, NULL);
 	if (ACPI_FAILURE(status)) {
 		resource->state = ACPI_POWER_RESOURCE_STATE_UNKNOWN;
 		return -ENODEV;
@@ -424,7 +431,7 @@ static int __acpi_power_off(struct acpi_power_resource *resource)
 
 	resource->state = ACPI_POWER_RESOURCE_STATE_OFF;
 
-	pr_debug("Power resource [%s] turned off\n", resource->name);
+	acpi_handle_debug(handle, "Power resource turned off\n");
 
 	return 0;
 }
@@ -434,12 +441,14 @@ static int acpi_power_off_unlocked(struct acpi_power_resource *resource)
 	int result = 0;
 
 	if (!resource->ref_count) {
-		pr_debug("Power resource [%s] already off\n", resource->name);
+		acpi_handle_debug(resource->device.handle,
+				  "Power resource already off\n");
 		return 0;
 	}
 
 	if (--resource->ref_count) {
-		pr_debug("Power resource [%s] still in use\n", resource->name);
+		acpi_handle_debug(resource->device.handle,
+				  "Power resource still in use\n");
 	} else {
 		result = __acpi_power_off(resource);
 		if (result)
@@ -949,7 +958,6 @@ struct acpi_device *acpi_add_power_resource(acpi_handle handle)
 	mutex_init(&resource->resource_lock);
 	INIT_LIST_HEAD(&resource->list_node);
 	INIT_LIST_HEAD(&resource->dependents);
-	resource->name = device->pnp.bus_id;
 	strcpy(acpi_device_name(device), ACPI_POWER_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_POWER_CLASS);
 	device->power.state = ACPI_STATE_UNKNOWN;
@@ -1004,7 +1012,7 @@ void acpi_resume_power_resources(void)
 
 		if (state == ACPI_POWER_RESOURCE_STATE_OFF
 		    && resource->ref_count) {
-			dev_dbg(&resource->device.dev, "Turning ON\n");
+			acpi_handle_debug(resource->device.handle, "Turning ON\n");
 			__acpi_power_on(resource);
 		}
 
@@ -1034,7 +1042,7 @@ void acpi_turn_off_unused_power_resources(void)
 		 */
 		if (!resource->ref_count &&
 		    resource->state != ACPI_POWER_RESOURCE_STATE_OFF) {
-			dev_dbg(&resource->device.dev, "Turning OFF\n");
+			acpi_handle_debug(resource->device.handle, "Turning OFF\n");
 			__acpi_power_off(resource);
 		}
 

drivers/acpi/processor_idle.c

@@ -1301,7 +1301,7 @@ int acpi_processor_power_state_has_changed(struct acpi_processor *pr)
 	if (pr->id == 0 && cpuidle_get_driver() == &acpi_idle_driver) {
 
 		/* Protect against cpu-hotplug */
-		get_online_cpus();
+		cpus_read_lock();
 		cpuidle_pause_and_lock();
 
 		/* Disable all cpuidle devices */
@@ -1330,7 +1330,7 @@ int acpi_processor_power_state_has_changed(struct acpi_processor *pr)
 			}
 		}
 		cpuidle_resume_and_unlock();
-		put_online_cpus();
+		cpus_read_unlock();
 	}
 
 	return 0;

drivers/acpi/spcr.c

@@ -136,6 +136,7 @@ int __init acpi_parse_spcr(bool enable_earlycon, bool enable_console)
 		break;
 	case ACPI_DBG2_16550_COMPATIBLE:
 	case ACPI_DBG2_16550_SUBSET:
+	case ACPI_DBG2_16550_WITH_GAS:
 		uart = "uart";
 		break;
 	default:

drivers/base/base.h

@@ -202,3 +202,6 @@ int devtmpfs_delete_node(struct device *dev);
 static inline int devtmpfs_create_node(struct device *dev) { return 0; }
 static inline int devtmpfs_delete_node(struct device *dev) { return 0; }
 #endif
+
+void software_node_notify(struct device *dev);
+void software_node_notify_remove(struct device *dev);

drivers/base/core.c

@@ -2002,24 +2002,24 @@ static inline int device_is_not_partition(struct device *dev)
 }
 #endif
 
-static int
-device_platform_notify(struct device *dev, enum kobject_action action)
+static void device_platform_notify(struct device *dev)
 {
-	int ret;
+	acpi_device_notify(dev);
 
-	ret = acpi_platform_notify(dev, action);
-	if (ret)
-		return ret;
+	software_node_notify(dev);
 
-	ret = software_node_notify(dev, action);
-	if (ret)
-		return ret;
-
-	if (platform_notify && action == KOBJ_ADD)
+	if (platform_notify)
 		platform_notify(dev);
-	else if (platform_notify_remove && action == KOBJ_REMOVE)
+}
+
+static void device_platform_notify_remove(struct device *dev)
+{
+	acpi_device_notify_remove(dev);
+
+	software_node_notify_remove(dev);
+
+	if (platform_notify_remove)
 		platform_notify_remove(dev);
-	return 0;
 }
 
 /**
@@ -3292,9 +3292,7 @@ int device_add(struct device *dev)
 	}
 
 	/* notify platform of device entry */
-	error = device_platform_notify(dev, KOBJ_ADD);
-	if (error)
-		goto platform_error;
+	device_platform_notify(dev);
 
 	error = device_create_file(dev, &dev_attr_uevent);
 	if (error)
@@ -3397,8 +3395,7 @@ int device_add(struct device *dev)
  SymlinkError:
 	device_remove_file(dev, &dev_attr_uevent);
  attrError:
-	device_platform_notify(dev, KOBJ_REMOVE);
-platform_error:
+	device_platform_notify_remove(dev);
 	kobject_uevent(&dev->kobj, KOBJ_REMOVE);
 	glue_dir = get_glue_dir(dev);
 	kobject_del(&dev->kobj);
@@ -3543,7 +3540,7 @@ void device_del(struct device *dev)
 	bus_remove_device(dev);
 	device_pm_remove(dev);
 	driver_deferred_probe_del(dev);
-	device_platform_notify(dev, KOBJ_REMOVE);
+	device_platform_notify_remove(dev);
 	device_remove_properties(dev);
 	device_links_purge(dev);
 

drivers/base/swnode.c

@@ -11,6 +11,8 @@
 #include <linux/property.h>
 #include <linux/slab.h>
 
+#include "base.h"
+
 struct swnode {
 	struct kobject kobj;
 	struct fwnode_handle fwnode;
@@ -1053,7 +1055,7 @@ int device_add_software_node(struct device *dev, const struct software_node *nod
 	 * balance.
 	 */
 	if (device_is_registered(dev))
-		software_node_notify(dev, KOBJ_ADD);
+		software_node_notify(dev);
 
 	return 0;
 }
@@ -1074,7 +1076,8 @@ void device_remove_software_node(struct device *dev)
 		return;
 
 	if (device_is_registered(dev))
-		software_node_notify(dev, KOBJ_REMOVE);
+		software_node_notify_remove(dev);
+
 	set_secondary_fwnode(dev, NULL);
 	kobject_put(&swnode->kobj);
 }
@@ -1117,44 +1120,44 @@ int device_create_managed_software_node(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(device_create_managed_software_node);
 
-int software_node_notify(struct device *dev, unsigned long action)
+void software_node_notify(struct device *dev)
 {
 	struct swnode *swnode;
 	int ret;
 
 	swnode = dev_to_swnode(dev);
 	if (!swnode)
-		return 0;
+		return;
 
-	switch (action) {
-	case KOBJ_ADD:
-		ret = sysfs_create_link(&dev->kobj, &swnode->kobj, "software_node");
-		if (ret)
-			break;
+	ret = sysfs_create_link(&dev->kobj, &swnode->kobj, "software_node");
+	if (ret)
+		return;
 
-		ret = sysfs_create_link(&swnode->kobj, &dev->kobj,
-					dev_name(dev));
-		if (ret) {
-			sysfs_remove_link(&dev->kobj, "software_node");
-			break;
-		}
-		kobject_get(&swnode->kobj);
-		break;
-	case KOBJ_REMOVE:
-		sysfs_remove_link(&swnode->kobj, dev_name(dev));
+	ret = sysfs_create_link(&swnode->kobj, &dev->kobj, dev_name(dev));
+	if (ret) {
 		sysfs_remove_link(&dev->kobj, "software_node");
-		kobject_put(&swnode->kobj);
-
-		if (swnode->managed) {
-			set_secondary_fwnode(dev, NULL);
-			kobject_put(&swnode->kobj);
-		}
-		break;
-	default:
-		break;
+		return;
 	}
 
-	return 0;
+	kobject_get(&swnode->kobj);
+}
+
+void software_node_notify_remove(struct device *dev)
+{
+	struct swnode *swnode;
+
+	swnode = dev_to_swnode(dev);
+	if (!swnode)
+		return;
+
+	sysfs_remove_link(&swnode->kobj, dev_name(dev));
+	sysfs_remove_link(&dev->kobj, "software_node");
+	kobject_put(&swnode->kobj);
+
+	if (swnode->managed) {
+		set_secondary_fwnode(dev, NULL);
+		kobject_put(&swnode->kobj);
+	}
 }
 
 static int __init software_node_init(void)

include/acpi/acnames.h

@@ -20,6 +20,7 @@
 #define METHOD_NAME__CLS        "_CLS"
 #define METHOD_NAME__CRS        "_CRS"
 #define METHOD_NAME__DDN        "_DDN"
+#define METHOD_NAME__DIS        "_DIS"
 #define METHOD_NAME__DMA        "_DMA"
 #define METHOD_NAME__HID        "_HID"
 #define METHOD_NAME__INI        "_INI"

include/acpi/acoutput.h

@@ -415,7 +415,7 @@
 /* Conditional execution */
 
 #define ACPI_DEBUG_EXEC(a)              a
-#define ACPI_DEBUG_ONLY_MEMBERS(a)      a;
+#define ACPI_DEBUG_ONLY_MEMBERS(a)      a
 #define _VERBOSE_STRUCTURES
 
 /* Various object display routines for debug */

include/acpi/acpi_io.h

@@ -14,6 +14,14 @@ static inline void __iomem *acpi_os_ioremap(acpi_physical_address phys,
 }
 #endif
 
+#ifndef acpi_os_memmap
+static inline void __iomem *acpi_os_memmap(acpi_physical_address phys,
+					    acpi_size size)
+{
+	return ioremap_cache(phys, size);
+}
+#endif
+
 extern bool acpi_permanent_mmap;
 
 void __iomem __ref

include/acpi/acpixf.h

@@ -12,7 +12,7 @@
 
 /* Current ACPICA subsystem version in YYYYMMDD format */
 
-#define ACPI_CA_VERSION                 0x20210604
+#define ACPI_CA_VERSION                 0x20210730
 
 #include <acpi/acconfig.h>
 #include <acpi/actypes.h>

include/acpi/actbl1.h

@@ -24,6 +24,7 @@
  * file. Useful because they make it more difficult to inadvertently type in
  * the wrong signature.
  */
+#define ACPI_SIG_AEST           "AEST"	/* Arm Error Source Table */
 #define ACPI_SIG_ASF            "ASF!"	/* Alert Standard Format table */
 #define ACPI_SIG_BERT           "BERT"	/* Boot Error Record Table */
 #define ACPI_SIG_BGRT           "BGRT"	/* Boot Graphics Resource Table */
@@ -482,7 +483,7 @@ struct acpi_csrt_descriptor {
  * DBG2 - Debug Port Table 2
  *        Version 0 (Both main table and subtables)
  *
- * Conforms to "Microsoft Debug Port Table 2 (DBG2)", December 10, 2015
+ * Conforms to "Microsoft Debug Port Table 2 (DBG2)", September 21, 2020
  *
  ******************************************************************************/
 
@@ -532,11 +533,24 @@ struct acpi_dbg2_device {
 
 #define ACPI_DBG2_16550_COMPATIBLE  0x0000
 #define ACPI_DBG2_16550_SUBSET      0x0001
+#define ACPI_DBG2_MAX311XE_SPI      0x0002
 #define ACPI_DBG2_ARM_PL011         0x0003
+#define ACPI_DBG2_MSM8X60           0x0004
+#define ACPI_DBG2_16550_NVIDIA      0x0005
+#define ACPI_DBG2_TI_OMAP           0x0006
+#define ACPI_DBG2_APM88XXXX         0x0008
+#define ACPI_DBG2_MSM8974           0x0009
+#define ACPI_DBG2_SAM5250           0x000A
+#define ACPI_DBG2_INTEL_USIF        0x000B
+#define ACPI_DBG2_IMX6              0x000C
 #define ACPI_DBG2_ARM_SBSA_32BIT    0x000D
 #define ACPI_DBG2_ARM_SBSA_GENERIC  0x000E
 #define ACPI_DBG2_ARM_DCC           0x000F
 #define ACPI_DBG2_BCM2835           0x0010
+#define ACPI_DBG2_SDM845_1_8432MHZ  0x0011
+#define ACPI_DBG2_16550_WITH_GAS    0x0012
+#define ACPI_DBG2_SDM845_7_372MHZ   0x0013
+#define ACPI_DBG2_INTEL_LPSS        0x0014
 
 #define ACPI_DBG2_1394_STANDARD     0x0000
 

include/acpi/actbl2.h

@@ -67,6 +67,176 @@
  * See http://stackoverflow.com/a/1053662/41661
  */
 
+/*******************************************************************************
+ *
+ * AEST - Arm Error Source Table
+ *
+ * Conforms to: ACPI for the Armv8 RAS Extensions 1.1 Platform Design Document
+ * September 2020.
+ *
+ ******************************************************************************/
+
+struct acpi_table_aest {
+	struct acpi_table_header header;
+	void *node_array[];
+};
+
+/* Common Subtable header - one per Node Structure (Subtable) */
+
+struct acpi_aest_hdr {
+	u8 type;
+	u16 length;
+	u8 reserved;
+	u32 node_specific_offset;
+	u32 node_interface_offset;
+	u32 node_interrupt_offset;
+	u32 node_interrupt_count;
+	u64 timestamp_rate;
+	u64 reserved1;
+	u64 error_injection_rate;
+};
+
+/* Values for Type above */
+
+#define ACPI_AEST_PROCESSOR_ERROR_NODE      0
+#define ACPI_AEST_MEMORY_ERROR_NODE         1
+#define ACPI_AEST_SMMU_ERROR_NODE           2
+#define ACPI_AEST_VENDOR_ERROR_NODE         3
+#define ACPI_AEST_GIC_ERROR_NODE            4
+#define ACPI_AEST_NODE_TYPE_RESERVED        5	/* 5 and above are reserved */
+
+/*
+ * AEST subtables (Error nodes)
+ */
+
+/* 0: Processor Error */
+
+typedef struct acpi_aest_processor {
+	u32 processor_id;
+	u8 resource_type;
+	u8 reserved;
+	u8 flags;
+	u8 revision;
+	u64 processor_affinity;
+
+} acpi_aest_processor;
+
+/* Values for resource_type above, related structs below */
+
+#define ACPI_AEST_CACHE_RESOURCE            0
+#define ACPI_AEST_TLB_RESOURCE              1
+#define ACPI_AEST_GENERIC_RESOURCE          2
+#define ACPI_AEST_RESOURCE_RESERVED         3	/* 3 and above are reserved */
+
+/* 0R: Processor Cache Resource Substructure */
+
+typedef struct acpi_aest_processor_cache {
+	u32 cache_reference;
+	u32 reserved;
+
+} acpi_aest_processor_cache;
+
+/* Values for cache_type above */
+
+#define ACPI_AEST_CACHE_DATA                0
+#define ACPI_AEST_CACHE_INSTRUCTION         1
+#define ACPI_AEST_CACHE_UNIFIED             2
+#define ACPI_AEST_CACHE_RESERVED            3	/* 3 and above are reserved */
+
+/* 1R: Processor TLB Resource Substructure */
+
+typedef struct acpi_aest_processor_tlb {
+	u32 tlb_level;
+	u32 reserved;
+
+} acpi_aest_processor_tlb;
+
+/* 2R: Processor Generic Resource Substructure */
+
+typedef struct acpi_aest_processor_generic {
+	u8 *resource;
+
+} acpi_aest_processor_generic;
+
+/* 1: Memory Error */
+
+typedef struct acpi_aest_memory {
+	u32 srat_proximity_domain;
+
+} acpi_aest_memory;
+
+/* 2: Smmu Error */
+
+typedef struct acpi_aest_smmu {
+	u32 iort_node_reference;
+	u32 subcomponent_reference;
+
+} acpi_aest_smmu;
+
+/* 3: Vendor Defined */
+
+typedef struct acpi_aest_vendor {
+	u32 acpi_hid;
+	u32 acpi_uid;
+	u8 vendor_specific_data[16];
+
+} acpi_aest_vendor;
+
+/* 4: Gic Error */
+
+typedef struct acpi_aest_gic {
+	u32 interface_type;
+	u32 instance_id;
+
+} acpi_aest_gic;
+
+/* Values for interface_type above */
+
+#define ACPI_AEST_GIC_CPU                   0
+#define ACPI_AEST_GIC_DISTRIBUTOR           1
+#define ACPI_AEST_GIC_REDISTRIBUTOR         2
+#define ACPI_AEST_GIC_ITS                   3
+#define ACPI_AEST_GIC_RESERVED              4	/* 4 and above are reserved */
+
+/* Node Interface Structure */
+
+typedef struct acpi_aest_node_interface {
+	u8 type;
+	u8 reserved[3];
+	u32 flags;
+	u64 address;
+	u32 error_record_index;
+	u32 error_record_count;
+	u64 error_record_implemented;
+	u64 error_status_reporting;
+	u64 addressing_mode;
+
+} acpi_aest_node_interface;
+
+/* Values for Type field above */
+
+#define ACPI_AEST_NODE_SYSTEM_REGISTER      0
+#define ACPI_AEST_NODE_MEMORY_MAPPED        1
+#define ACPI_AEST_XFACE_RESERVED            2	/* 2 and above are reserved */
+
+/* Node Interrupt Structure */
+
+typedef struct acpi_aest_node_interrupt {
+	u8 type;
+	u8 reserved[2];
+	u8 flags;
+	u32 gsiv;
+	u8 iort_id;
+	u8 reserved1[3];
+
+} acpi_aest_node_interrupt;
+
+/* Values for Type field above */
+
+#define ACPI_AEST_NODE_FAULT_HANDLING       0
+#define ACPI_AEST_NODE_ERROR_RECOVERY       1
+#define ACPI_AEST_XRUPT_RESERVED            2	/* 2 and above are reserved */
+
 /*******************************************************************************
  *
  * BDAT - BIOS Data ACPI Table

include/acpi/actbl3.h

@@ -723,6 +723,10 @@ struct acpi_table_wpbt {
 	u16 arguments_length;
 };
 
+struct acpi_wpbt_unicode {
+	u16 *unicode_string;
+};
+
 /*******************************************************************************
  *
  * WSMT - Windows SMM Security Mitigations Table

include/linux/acpi.h

@@ -249,7 +249,7 @@ void acpi_table_print_madt_entry (struct acpi_subtable_header *madt);
 /* the following numa functions are architecture-dependent */
 void acpi_numa_slit_init (struct acpi_table_slit *slit);
 
-#if defined(CONFIG_X86) || defined(CONFIG_IA64)
+#if defined(CONFIG_X86) || defined(CONFIG_IA64) || defined(CONFIG_LOONGARCH)
 void acpi_numa_processor_affinity_init (struct acpi_srat_cpu_affinity *pa);
 #else
 static inline void
@@ -1380,13 +1380,11 @@ static inline int find_acpi_cpu_cache_topology(unsigned int cpu, int level)
 #endif
 
 #ifdef CONFIG_ACPI
-extern int acpi_platform_notify(struct device *dev, enum kobject_action action);
+extern void acpi_device_notify(struct device *dev);
+extern void acpi_device_notify_remove(struct device *dev);
 #else
-static inline int
-acpi_platform_notify(struct device *dev, enum kobject_action action)
-{
-	return 0;
-}
+static inline void acpi_device_notify(struct device *dev) { }
+static inline void acpi_device_notify_remove(struct device *dev) { }
 #endif
 
 #endif	/*_LINUX_ACPI_H*/

include/linux/property.h

@@ -484,8 +484,6 @@ void software_node_unregister_node_group(const struct software_node **node_group
 int software_node_register(const struct software_node *node);
 void software_node_unregister(const struct software_node *node);
 
-int software_node_notify(struct device *dev, unsigned long action);
-
 struct fwnode_handle *
 fwnode_create_software_node(const struct property_entry *properties,
 			    const struct fwnode_handle *parent);