ASoC: dwc: don't assign addr_width for dt configs

For proper DMA operation addr_width must corresponds with audio format
(S16, S24, S32, etc). Proper bus width calculations is performed by
snd_hwparams_to_dma_slave_config(). So drop wrong addr_width asignment
for dt configs and let snd_hwparams_to_dma_slave_config() do the job.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Link: https://lore.kernel.org/r/20230613191552.724748-1-fido_max@inbox.ruSigned-off-by: Mark Brown <broonie@kernel.org>

sound/soc/dwc/dwc-i2s.c

@@ -593,13 +593,9 @@ static int dw_configure_dai_by_dt(struct dw_i2s_dev *dev,
 	u32 comp1 = i2s_read_reg(dev->i2s_base, I2S_COMP_PARAM_1);
 	u32 comp2 = i2s_read_reg(dev->i2s_base, I2S_COMP_PARAM_2);
 	u32 fifo_depth = 1 << (1 + COMP1_FIFO_DEPTH_GLOBAL(comp1));
-	u32 idx = COMP1_APB_DATA_WIDTH(comp1);
 	u32 idx2;
 	int ret;
 
-	if (WARN_ON(idx >= ARRAY_SIZE(bus_widths)))
-		return -EINVAL;
-
 	ret = dw_configure_dai(dev, dw_i2s_dai, SNDRV_PCM_RATE_8000_192000);
 	if (ret < 0)
 		return ret;
@@ -609,7 +605,6 @@ static int dw_configure_dai_by_dt(struct dw_i2s_dev *dev,
 
 		dev->capability |= DWC_I2S_PLAY;
 		dev->play_dma_data.dt.addr = res->start + I2S_TXDMA;
-		dev->play_dma_data.dt.addr_width = bus_widths[idx];
 		dev->play_dma_data.dt.fifo_size = fifo_depth *
 			(fifo_width[idx2]) >> 8;
 		dev->play_dma_data.dt.maxburst = 16;
@@ -619,7 +614,6 @@ static int dw_configure_dai_by_dt(struct dw_i2s_dev *dev,
 
 		dev->capability |= DWC_I2S_RECORD;
 		dev->capture_dma_data.dt.addr = res->start + I2S_RXDMA;
-		dev->capture_dma_data.dt.addr_width = bus_widths[idx];
 		dev->capture_dma_data.dt.fifo_size = fifo_depth *
 			(fifo_width[idx2] >> 8);
 		dev->capture_dma_data.dt.maxburst = 16;