Commit 6fda93b9 authored by Olof Johansson's avatar Olof Johansson

Merge tag 'at91-fixes' of...

Merge tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes

Merge "at91: fixes for 3.19 #1 (ter)" from Nicolas Ferre:

First fixes batch for AT91 on 3.19:
- fix some DT entries
- correct clock entry for the at91sam9263 LCD
- add a phy_fixup for Eth1 on sama5d4

* tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91: board-dt-sama5: add phy_fixup to override NAND_Tree
  ARM: at91/dt: sam9263: Add missing clocks to lcdc node
  ARM: at91: sama5d3: dt: correct the sound route
  ARM: at91/dt: sama5d4: fix the timer reg length
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents c9b75d51 b8659752
...@@ -953,6 +953,8 @@ fb0: fb@0x00700000 { ...@@ -953,6 +953,8 @@ fb0: fb@0x00700000 {
interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>; interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fb>; pinctrl-0 = <&pinctrl_fb>;
clocks = <&lcd_clk>, <&lcd_clk>;
clock-names = "lcdc_clk", "hclk";
status = "disabled"; status = "disabled";
}; };
......
...@@ -176,7 +176,7 @@ sound { ...@@ -176,7 +176,7 @@ sound {
"Headphone Jack", "HPOUTR", "Headphone Jack", "HPOUTR",
"IN2L", "Line In Jack", "IN2L", "Line In Jack",
"IN2R", "Line In Jack", "IN2R", "Line In Jack",
"MICBIAS", "IN1L", "Mic", "MICBIAS",
"IN1L", "Mic"; "IN1L", "Mic";
atmel,ssc-controller = <&ssc0>; atmel,ssc-controller = <&ssc0>;
......
...@@ -1008,7 +1008,7 @@ shdwc@fc068610 { ...@@ -1008,7 +1008,7 @@ shdwc@fc068610 {
pit: timer@fc068630 { pit: timer@fc068630 {
compatible = "atmel,at91sam9260-pit"; compatible = "atmel,at91sam9260-pit";
reg = <0xfc068630 0xf>; reg = <0xfc068630 0x10>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
clocks = <&h32ck>; clocks = <&h32ck>;
}; };
......
...@@ -17,6 +17,7 @@ ...@@ -17,6 +17,7 @@
#include <linux/of_platform.h> #include <linux/of_platform.h>
#include <linux/phy.h> #include <linux/phy.h>
#include <linux/clk-provider.h> #include <linux/clk-provider.h>
#include <linux/phy.h>
#include <asm/setup.h> #include <asm/setup.h>
#include <asm/irq.h> #include <asm/irq.h>
...@@ -26,8 +27,25 @@ ...@@ -26,8 +27,25 @@
#include "generic.h" #include "generic.h"
static int ksz8081_phy_fixup(struct phy_device *phy)
{
int value;
value = phy_read(phy, 0x16);
value &= ~0x20;
phy_write(phy, 0x16, value);
return 0;
}
static void __init sama5_dt_device_init(void) static void __init sama5_dt_device_init(void)
{ {
if (of_machine_is_compatible("atmel,sama5d4ek") &&
IS_ENABLED(CONFIG_PHYLIB)) {
phy_register_fixup_for_id("fc028000.etherne:00",
ksz8081_phy_fixup);
}
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment