Commit 6fecd35d authored by Bjørn Mork's avatar Bjørn Mork Committed by David S. Miller

net: qmi_wwan: add ZTE MF60

Adding a device with limited QMI support. It does not support
normal QMI_WDS commands for connection management. Instead,
sending a QMI_CTL SET_INSTANCE_ID command is required to
enable the network interface:

  01 0f 00 00 00 00 00 00  20 00 04 00 01 01 00 00

A number of QMI_DMS and QMI_NAS commands are also supported
for optional device management.
Signed-off-by: default avatarBjørn Mork <bjorn@mork.no>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent b761c9b1
......@@ -346,6 +346,15 @@ static const struct driver_info qmi_wwan_force_int1 = {
.data = BIT(1), /* interface whitelist bitmap */
};
static const struct driver_info qmi_wwan_force_int2 = {
.description = "Qualcomm WWAN/QMI device",
.flags = FLAG_WWAN,
.bind = qmi_wwan_bind_shared,
.unbind = qmi_wwan_unbind_shared,
.manage_power = qmi_wwan_manage_power,
.data = BIT(2), /* interface whitelist bitmap */
};
static const struct driver_info qmi_wwan_force_int3 = {
.description = "Qualcomm WWAN/QMI device",
.flags = FLAG_WWAN,
......@@ -498,6 +507,15 @@ static const struct usb_device_id products[] = {
.bInterfaceProtocol = 0xff,
.driver_info = (unsigned long)&qmi_wwan_force_int4,
},
{ /* ZTE MF60 */
.match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
.idVendor = 0x19d2,
.idProduct = 0x1402,
.bInterfaceClass = 0xff,
.bInterfaceSubClass = 0xff,
.bInterfaceProtocol = 0xff,
.driver_info = (unsigned long)&qmi_wwan_force_int2,
},
{ /* Sierra Wireless MC77xx in QMI mode */
.match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
.idVendor = 0x1199,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment