Commit 6fff607e authored by John Fastabend's avatar John Fastabend Committed by Daniel Borkmann

bpf: sk_msg program helper bpf_msg_push_data

This allows user to push data into a msg using sk_msg program types.
The format is as follows,

	bpf_msg_push_data(msg, offset, len, flags)

this will insert 'len' bytes at offset 'offset'. For example to
prepend 10 bytes at the front of the message the user can,

	bpf_msg_push_data(msg, 0, 10, 0);

This will invalidate data bounds so BPF user will have to then recheck
data bounds after calling this. After this the msg size will have been
updated and the user is free to write into the added bytes. We allow
any offset/len as long as it is within the (data, data_end) range.
However, a copy will be required if the ring is full and its possible
for the helper to fail with ENOMEM or EINVAL errors which need to be
handled by the BPF program.

This can be used similar to XDP metadata to pass data between sk_msg
layer and lower layers.
Signed-off-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
parent 5032d079
...@@ -207,6 +207,11 @@ static inline struct scatterlist *sk_msg_elem(struct sk_msg *msg, int which) ...@@ -207,6 +207,11 @@ static inline struct scatterlist *sk_msg_elem(struct sk_msg *msg, int which)
return &msg->sg.data[which]; return &msg->sg.data[which];
} }
static inline struct scatterlist sk_msg_elem_cpy(struct sk_msg *msg, int which)
{
return msg->sg.data[which];
}
static inline struct page *sk_msg_page(struct sk_msg *msg, int which) static inline struct page *sk_msg_page(struct sk_msg *msg, int which)
{ {
return sg_page(sk_msg_elem(msg, which)); return sg_page(sk_msg_elem(msg, which));
......
...@@ -2240,6 +2240,23 @@ union bpf_attr { ...@@ -2240,6 +2240,23 @@ union bpf_attr {
* pointer that was returned from bpf_sk_lookup_xxx\ (). * pointer that was returned from bpf_sk_lookup_xxx\ ().
* Return * Return
* 0 on success, or a negative error in case of failure. * 0 on success, or a negative error in case of failure.
*
* int bpf_msg_push_data(struct sk_buff *skb, u32 start, u32 len, u64 flags)
* Description
* For socket policies, insert *len* bytes into msg at offset
* *start*.
*
* If a program of type **BPF_PROG_TYPE_SK_MSG** is run on a
* *msg* it may want to insert metadata or options into the msg.
* This can later be read and used by any of the lower layer BPF
* hooks.
*
* This helper may fail if under memory pressure (a malloc
* fails) in these cases BPF programs will get an appropriate
* error and BPF programs will need to handle them.
*
* Return
* 0 on success, or a negative error in case of failure.
*/ */
#define __BPF_FUNC_MAPPER(FN) \ #define __BPF_FUNC_MAPPER(FN) \
FN(unspec), \ FN(unspec), \
...@@ -2331,7 +2348,8 @@ union bpf_attr { ...@@ -2331,7 +2348,8 @@ union bpf_attr {
FN(sk_release), \ FN(sk_release), \
FN(map_push_elem), \ FN(map_push_elem), \
FN(map_pop_elem), \ FN(map_pop_elem), \
FN(map_peek_elem), FN(map_peek_elem), \
FN(msg_push_data),
/* integer value in 'imm' field of BPF_CALL instruction selects which helper /* integer value in 'imm' field of BPF_CALL instruction selects which helper
* function eBPF program intends to call * function eBPF program intends to call
......
...@@ -2297,6 +2297,137 @@ static const struct bpf_func_proto bpf_msg_pull_data_proto = { ...@@ -2297,6 +2297,137 @@ static const struct bpf_func_proto bpf_msg_pull_data_proto = {
.arg4_type = ARG_ANYTHING, .arg4_type = ARG_ANYTHING,
}; };
BPF_CALL_4(bpf_msg_push_data, struct sk_msg *, msg, u32, start,
u32, len, u64, flags)
{
struct scatterlist sge, nsge, nnsge, rsge = {0}, *psge;
u32 new, i = 0, l, space, copy = 0, offset = 0;
u8 *raw, *to, *from;
struct page *page;
if (unlikely(flags))
return -EINVAL;
/* First find the starting scatterlist element */
i = msg->sg.start;
do {
l = sk_msg_elem(msg, i)->length;
if (start < offset + l)
break;
offset += l;
sk_msg_iter_var_next(i);
} while (i != msg->sg.end);
if (start >= offset + l)
return -EINVAL;
space = MAX_MSG_FRAGS - sk_msg_elem_used(msg);
/* If no space available will fallback to copy, we need at
* least one scatterlist elem available to push data into
* when start aligns to the beginning of an element or two
* when it falls inside an element. We handle the start equals
* offset case because its the common case for inserting a
* header.
*/
if (!space || (space == 1 && start != offset))
copy = msg->sg.data[i].length;
page = alloc_pages(__GFP_NOWARN | GFP_ATOMIC | __GFP_COMP,
get_order(copy + len));
if (unlikely(!page))
return -ENOMEM;
if (copy) {
int front, back;
raw = page_address(page);
psge = sk_msg_elem(msg, i);
front = start - offset;
back = psge->length - front;
from = sg_virt(psge);
if (front)
memcpy(raw, from, front);
if (back) {
from += front;
to = raw + front + len;
memcpy(to, from, back);
}
put_page(sg_page(psge));
} else if (start - offset) {
psge = sk_msg_elem(msg, i);
rsge = sk_msg_elem_cpy(msg, i);
psge->length = start - offset;
rsge.length -= psge->length;
rsge.offset += start;
sk_msg_iter_var_next(i);
sg_unmark_end(psge);
sk_msg_iter_next(msg, end);
}
/* Slot(s) to place newly allocated data */
new = i;
/* Shift one or two slots as needed */
if (!copy) {
sge = sk_msg_elem_cpy(msg, i);
sk_msg_iter_var_next(i);
sg_unmark_end(&sge);
sk_msg_iter_next(msg, end);
nsge = sk_msg_elem_cpy(msg, i);
if (rsge.length) {
sk_msg_iter_var_next(i);
nnsge = sk_msg_elem_cpy(msg, i);
}
while (i != msg->sg.end) {
msg->sg.data[i] = sge;
sge = nsge;
sk_msg_iter_var_next(i);
if (rsge.length) {
nsge = nnsge;
nnsge = sk_msg_elem_cpy(msg, i);
} else {
nsge = sk_msg_elem_cpy(msg, i);
}
}
}
/* Place newly allocated data buffer */
sk_mem_charge(msg->sk, len);
msg->sg.size += len;
msg->sg.copy[new] = false;
sg_set_page(&msg->sg.data[new], page, len + copy, 0);
if (rsge.length) {
get_page(sg_page(&rsge));
sk_msg_iter_var_next(new);
msg->sg.data[new] = rsge;
}
sk_msg_compute_data_pointers(msg);
return 0;
}
static const struct bpf_func_proto bpf_msg_push_data_proto = {
.func = bpf_msg_push_data,
.gpl_only = false,
.ret_type = RET_INTEGER,
.arg1_type = ARG_PTR_TO_CTX,
.arg2_type = ARG_ANYTHING,
.arg3_type = ARG_ANYTHING,
.arg4_type = ARG_ANYTHING,
};
BPF_CALL_1(bpf_get_cgroup_classid, const struct sk_buff *, skb) BPF_CALL_1(bpf_get_cgroup_classid, const struct sk_buff *, skb)
{ {
return task_get_classid(skb); return task_get_classid(skb);
...@@ -4854,6 +4985,7 @@ bool bpf_helper_changes_pkt_data(void *func) ...@@ -4854,6 +4985,7 @@ bool bpf_helper_changes_pkt_data(void *func)
func == bpf_xdp_adjust_head || func == bpf_xdp_adjust_head ||
func == bpf_xdp_adjust_meta || func == bpf_xdp_adjust_meta ||
func == bpf_msg_pull_data || func == bpf_msg_pull_data ||
func == bpf_msg_push_data ||
func == bpf_xdp_adjust_tail || func == bpf_xdp_adjust_tail ||
#if IS_ENABLED(CONFIG_IPV6_SEG6_BPF) #if IS_ENABLED(CONFIG_IPV6_SEG6_BPF)
func == bpf_lwt_seg6_store_bytes || func == bpf_lwt_seg6_store_bytes ||
...@@ -5130,6 +5262,8 @@ sk_msg_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog) ...@@ -5130,6 +5262,8 @@ sk_msg_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
return &bpf_msg_cork_bytes_proto; return &bpf_msg_cork_bytes_proto;
case BPF_FUNC_msg_pull_data: case BPF_FUNC_msg_pull_data:
return &bpf_msg_pull_data_proto; return &bpf_msg_pull_data_proto;
case BPF_FUNC_msg_push_data:
return &bpf_msg_push_data_proto;
case BPF_FUNC_get_local_storage: case BPF_FUNC_get_local_storage:
return &bpf_get_local_storage_proto; return &bpf_get_local_storage_proto;
default: default:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment