MIPS: bmips: Add support PCIe controller device nodes

For Broadcom STB PCIe HW. The 7425 and 7435 are MIPs-based SOCs.  Not much
difference between the two for the DT properties except that they have
slightly different PCIe interrupt assignments.
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

arch/mips/boot/dts/brcm/bcm7425.dtsi

@@ -584,4 +584,34 @@ shimphy@8000 {
 			};
 		};
 	};
+
+	pcie_0: pcie@8b20000 {
+		status = "disabled";
+		compatible = "brcm,bcm7425-pcie";
+
+		ranges = <0x02000000 0x0 0xd0000000 0xd0000000 0x0 0x08000000
+			  0x02000000 0x0 0xd8000000 0xd8000000 0x0 0x08000000
+			  0x02000000 0x0 0xe0000000 0xe0000000 0x0 0x08000000
+			  0x02000000 0x0 0xe8000000 0xe8000000 0x0 0x08000000>;
+
+		reg = <0x10410000 0x19310>;
+		aspm-no-l0s;
+		device_type = "pci";
+		msi-controller;
+		msi-parent = <&pcie_0>;
+		#address-cells = <0x3>;
+		#size-cells = <0x2>;
+		bus-range = <0x0 0xff>;
+		interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+		linux,pci-domain = <0x0>;
+
+		interrupt-parent = <&periph_intc>;
+		interrupts = <37>, <37>;
+		interrupt-names = "pcie", "msi";
+		#interrupt-cells = <0x1>;
+		interrupt-map = <0 0 0 1 &periph_intc 0x21
+				 0 0 0 1 &periph_intc 0x22
+				 0 0 0 1 &periph_intc 0x23
+				 0 0 0 1 &periph_intc 0x24>;
+	};
 };

arch/mips/boot/dts/brcm/bcm7435.dtsi

@@ -599,4 +599,34 @@ shimphy@8000 {
 			};
 		};
 	};
+
+	pcie_0: pcie@8b20000 {
+		status = "disabled";
+		compatible = "brcm,bcm7435-pcie";
+
+		ranges = <0x02000000 0x0 0xd0000000 0xd0000000 0x0 0x08000000
+			  0x02000000 0x0 0xd8000000 0xd8000000 0x0 0x08000000
+			  0x02000000 0x0 0xe0000000 0xe0000000 0x0 0x08000000
+			  0x02000000 0x0 0xe8000000 0xe8000000 0x0 0x08000000>;
+
+		reg = <0x10410000 0x19310>;
+		aspm-no-l0s;
+		device_type = "pci";
+		msi-controller;
+		msi-parent = <&pcie_0>;
+		#address-cells = <0x3>;
+		#size-cells = <0x2>;
+		bus-range = <0x0 0xff>;
+		interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+		linux,pci-domain = <0x0>;
+
+		interrupt-parent = <&periph_intc>;
+		interrupts = <39>, <39>;
+		interrupt-names = "pcie", "msi";
+		#interrupt-cells = <0x1>;
+		interrupt-map = <0 0 0 1 &periph_intc 0x23
+				 0 0 0 1 &periph_intc 0x24
+				 0 0 0 1 &periph_intc 0x25
+				 0 0 0 1 &periph_intc 0x26>;
+	};
 };

arch/mips/boot/dts/brcm/bcm97425svmb.dts

@@ -152,3 +152,12 @@ &mspi {
 &waketimer {
 	status = "okay";
 };
+
+&pcie_0 {
+	status = "okay";
+	/* 1GB Memc0, 1GB Memc1 */
+	brcm,scb-sizes = <0 0x40000000 0 0x40000000>;
+	dma-ranges = <0x43000000 0x00000000 0x00000000 0x00000000 0x0 0x10000000
+		      0x43000000 0x00000000 0x10000000 0x20000000 0x0 0x30000000
+		      0x43000000 0x00000000 0x40000000 0x90000000 0x0 0x40000000>;
+};

arch/mips/boot/dts/brcm/bcm97435svmb.dts

@@ -128,3 +128,12 @@ &mspi {
 &waketimer {
 	status = "okay";
 };
+
+&pcie_0 {
+	status = "okay";
+	/* 1GB Memc0, 1GB Memc1 */
+	brcm,scb-sizes = <0 0x40000000 0 0x40000000>;
+	dma-ranges = <0x43000000 0x00000000 0x00000000 0x00000000 0x0 0x10000000
+		      0x43000000 0x00000000 0x10000000 0x20000000 0x0 0x30000000
+		      0x43000000 0x00000000 0x40000000 0x90000000 0x0 0x40000000>;
+};