iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER

During commit 067fda1c ("iio: hid-sensors: move triggered buffer
setup into hid_sensor_setup_trigger"), the
iio_triggered_buffer_{setup,cleanup}() functions got moved under the
hid-sensor-trigger module.

The above change works fine, if any of the sensors get built. However, when
only the common hid-sensor-trigger module gets built (and none of the
drivers), then the IIO_TRIGGERED_BUFFER symbol isn't selected/enforced.

Previously, each driver would enforce/select the IIO_TRIGGERED_BUFFER
symbol. With this change the HID_SENSOR_IIO_TRIGGER (for the
hid-sensor-trigger module) will enforce that IIO_TRIGGERED_BUFFER gets
selected.

All HID sensor drivers select the HID_SENSOR_IIO_TRIGGER symbol. So, this
change removes the IIO_TRIGGERED_BUFFER enforcement from each driver.

Fixes: 067fda1c ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger")
Reported-by: Thomas Deutschmann <whissi@gentoo.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20210414084955.260117-1-aardelean@deviqon.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/iio/accel/Kconfig

@@ -229,7 +229,6 @@ config DMARD10
 config HID_SENSOR_ACCEL_3D
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	tristate "HID Accelerometers 3D"

drivers/iio/common/hid-sensors/Kconfig

@@ -19,6 +19,7 @@ config HID_SENSOR_IIO_TRIGGER
 	tristate "Common module (trigger) for all HID Sensor IIO drivers"
 	depends on HID_SENSOR_HUB && HID_SENSOR_IIO_COMMON && IIO_BUFFER
 	select IIO_TRIGGER
+	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to build trigger support for HID sensors.
 	  Triggers will be send if all requested attributes were read.

drivers/iio/gyro/Kconfig

@@ -111,7 +111,6 @@ config FXAS21002C_SPI
 config HID_SENSOR_GYRO_3D
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	tristate "HID Gyroscope 3D"

drivers/iio/humidity/Kconfig

@@ -52,7 +52,6 @@ config HID_SENSOR_HUMIDITY
 	tristate "HID Environmental humidity sensor"
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	help

drivers/iio/light/Kconfig

@@ -256,7 +256,6 @@ config ISL29125
 config HID_SENSOR_ALS
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	tristate "HID ALS"
@@ -270,7 +269,6 @@ config HID_SENSOR_ALS
 config HID_SENSOR_PROX
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	tristate "HID PROX"

drivers/iio/magnetometer/Kconfig

@@ -95,7 +95,6 @@ config MAG3110
 config HID_SENSOR_MAGNETOMETER_3D
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	tristate "HID Magenetometer 3D"

drivers/iio/orientation/Kconfig

@@ -9,7 +9,6 @@ menu "Inclinometer sensors"
 config HID_SENSOR_INCLINOMETER_3D
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	tristate "HID Inclinometer 3D"
@@ -20,7 +19,6 @@ config HID_SENSOR_INCLINOMETER_3D
 config HID_SENSOR_DEVICE_ROTATION
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	tristate "HID Device Rotation"

drivers/iio/pressure/Kconfig

@@ -79,7 +79,6 @@ config DPS310
 config HID_SENSOR_PRESS
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	tristate "HID PRESS"

drivers/iio/temperature/Kconfig

@@ -45,7 +45,6 @@ config HID_SENSOR_TEMP
 	tristate "HID Environmental temperature sensor"
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	help