power: supply: bq27xxx_battery: Add the BQ28z610 Battery monitor

Add the Texas Instruments BQ28z610 battery monitor.
The register address map is laid out the same as compared to other
devices within the file.

The battery status register bits are similar to the bq27z561 but they
are different compared to other fuel gauge devices within this file.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

drivers/power/supply/bq27xxx_battery.c

@@ -44,6 +44,7 @@
  * https://www.ti.com/product/bq27441-g1
  * https://www.ti.com/product/bq27621-g1
  * https://www.ti.com/product/bq27z561
+ * https://www.ti.com/product/bq28z610
  */
 
 #include <linux/device.h>
@@ -462,6 +463,26 @@ static u8
 		[BQ27XXX_REG_DCAP] = 0x3c,
 		[BQ27XXX_REG_AP] = 0x22,
 		BQ27XXX_DM_REG_ROWS,
+	},
+	bq28z610_regs[BQ27XXX_REG_MAX] = {
+		[BQ27XXX_REG_CTRL] = 0x00,
+		[BQ27XXX_REG_TEMP] = 0x06,
+		[BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_VOLT] = 0x08,
+		[BQ27XXX_REG_AI] = 0x14,
+		[BQ27XXX_REG_FLAGS] = 0x0a,
+		[BQ27XXX_REG_TTE] = 0x16,
+		[BQ27XXX_REG_TTF] = 0x18,
+		[BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_FCC] = 0x12,
+		[BQ27XXX_REG_CYCT] = 0x2a,
+		[BQ27XXX_REG_AE] = 0x22,
+		[BQ27XXX_REG_SOC] = 0x2c,
+		[BQ27XXX_REG_DCAP] = 0x3c,
+		[BQ27XXX_REG_AP] = 0x22,
+		BQ27XXX_DM_REG_ROWS,
 	};
 
 static enum power_supply_property bq27000_props[] = {
@@ -717,6 +738,25 @@ static enum power_supply_property bq27z561_props[] = {
 	POWER_SUPPLY_PROP_MANUFACTURER,
 };
 
+static enum power_supply_property bq28z610_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_POWER_AVG,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
 struct bq27xxx_dm_reg {
 	u8 subclass_id;
 	u8 offset;
@@ -813,6 +853,7 @@ static struct bq27xxx_dm_reg bq27621_dm_regs[] = {
 #endif
 
 #define bq27z561_dm_regs 0
+#define bq28z610_dm_regs 0
 
 #define BQ27XXX_O_ZERO	0x00000001
 #define BQ27XXX_O_OTDC	0x00000002 /* has OTC/OTD overtemperature flags */
@@ -865,6 +906,7 @@ static struct {
 	[BQ27441]   = BQ27XXX_DATA(bq27441,   0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM),
 	[BQ27621]   = BQ27XXX_DATA(bq27621,   0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM),
 	[BQ27Z561]  = BQ27XXX_DATA(bq27z561,  0         , BQ27Z561_O_BITS),
+	[BQ28Z610]  = BQ27XXX_DATA(bq28z610,  0         , BQ27Z561_O_BITS),
 };
 
 static DEFINE_MUTEX(bq27xxx_list_lock);

drivers/power/supply/bq27xxx_battery_i2c.c

@@ -254,6 +254,7 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
 	{ "bq27441", BQ27441 },
 	{ "bq27621", BQ27621 },
 	{ "bq27z561", BQ27Z561 },
+	{ "bq28z610", BQ28Z610 },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, bq27xxx_i2c_id_table);
@@ -288,6 +289,7 @@ static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = {
 	{ .compatible = "ti,bq27441" },
 	{ .compatible = "ti,bq27621" },
 	{ .compatible = "ti,bq27z561" },
+	{ .compatible = "ti,bq28z610" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, bq27xxx_battery_i2c_of_match_table);

include/linux/power/bq27xxx_battery.h

@@ -31,6 +31,7 @@ enum bq27xxx_chip {
 	BQ27441,
 	BQ27621,
 	BQ27Z561,
+	BQ28Z610,
 };
 
 struct bq27xxx_device_info;