Merge tag 'imx-fixes-5.16' of...

Merge tag 'imx-fixes-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.16:

- A series from Vladimir Oltean to update SJA1105 switch RGMII delay for
  a few boards, so that kernel doesn't warn on the legacy bindings.
- Remove redundant interrupt declaration for gpio-keys on board
  ls1088a-ten64, as this causes an IRQ reclaiming error on kernel v5.15
  and later.

* tag 'imx-fixes-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: ten64: remove redundant interrupt declaration for gpio-keys
  arm64: dts: lx2160abluebox3: update RGMII delays for sja1105 switch
  ARM: dts: ls1021a-tsn: update RGMII delays for sja1105 switch
  ARM: dts: imx6qp-prtwd3: update RGMII delays for sja1105 switch

Link: https://lore.kernel.org/r/20211126100716.GF4216@dragonSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/imx6qp-prtwd3.dts

@@ -178,6 +178,8 @@ port@4 {
 				label = "cpu";
 				ethernet = <&fec>;
 				phy-mode = "rgmii-id";
+				rx-internal-delay-ps = <2000>;
+				tx-internal-delay-ps = <2000>;
 
 				fixed-link {
 					speed = <100>;

arch/arm/boot/dts/ls1021a-tsn.dts

@@ -91,6 +91,8 @@ port@4 {
 				/* Internal port connected to eth2 */
 				ethernet = <&enet2>;
 				phy-mode = "rgmii";
+				rx-internal-delay-ps = <0>;
+				tx-internal-delay-ps = <0>;
 				reg = <4>;
 
 				fixed-link {

arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts

@@ -38,7 +38,6 @@ buttons {
 		powerdn {
 			label = "External Power Down";
 			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-			interrupts = <&gpio1 17 IRQ_TYPE_EDGE_FALLING>;
 			linux,code = <KEY_POWER>;
 		};
 
@@ -46,7 +45,6 @@ powerdn {
 		admin {
 			label = "ADMIN button";
 			gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
-			interrupts = <&gpio3 8 IRQ_TYPE_EDGE_RISING>;
 			linux,code = <KEY_WPS_BUTTON>;
 		};
 	};

arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts

@@ -386,6 +386,8 @@ port@2 {
 				reg = <2>;
 				ethernet = <&dpmac17>;
 				phy-mode = "rgmii-id";
+				rx-internal-delay-ps = <2000>;
+				tx-internal-delay-ps = <2000>;
 
 				fixed-link {
 					speed = <1000>;
@@ -529,6 +531,8 @@ port@2 {
 				reg = <2>;
 				ethernet = <&dpmac18>;
 				phy-mode = "rgmii-id";
+				rx-internal-delay-ps = <2000>;
+				tx-internal-delay-ps = <2000>;
 
 				fixed-link {
 					speed = <1000>;