Commit 70a9beaa authored by Boris Brezillon's avatar Boris Brezillon Committed by Nicolas Ferre

ARM: at91/dt: fix at91 udc compatible strings

The at91rm9200, at91sam9260, at91sam9261 and at91sam9263 SoCs have slightly
different UDC IPs.
Those differences were previously handled with cpu_is_at91xx macro which
are about to be dropped for multi-platform support, thus we need to
change compatible strings.
Signed-off-by: default avatarBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
parent ea1c98b3
...@@ -853,7 +853,7 @@ macb0: ethernet@fffc4000 { ...@@ -853,7 +853,7 @@ macb0: ethernet@fffc4000 {
}; };
usb1: gadget@fffa4000 { usb1: gadget@fffa4000 {
compatible = "atmel,at91rm9200-udc"; compatible = "atmel,at91sam9260-udc";
reg = <0xfffa4000 0x4000>; reg = <0xfffa4000 0x4000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&udc_clk>, <&udpck>; clocks = <&udc_clk>, <&udpck>;
......
...@@ -124,11 +124,12 @@ tcb0: timer@fffa0000 { ...@@ -124,11 +124,12 @@ tcb0: timer@fffa0000 {
}; };
usb1: gadget@fffa4000 { usb1: gadget@fffa4000 {
compatible = "atmel,at91rm9200-udc"; compatible = "atmel,at91sam9261-udc";
reg = <0xfffa4000 0x4000>; reg = <0xfffa4000 0x4000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&udc_clk>, <&udpck>; clocks = <&udc_clk>, <&udpck>;
clock-names = "pclk", "hclk"; clock-names = "pclk", "hclk";
atmel,matrix = <&matrix>;
status = "disabled"; status = "disabled";
}; };
......
...@@ -856,7 +856,7 @@ macb0: ethernet@fffbc000 { ...@@ -856,7 +856,7 @@ macb0: ethernet@fffbc000 {
}; };
usb1: gadget@fff78000 { usb1: gadget@fff78000 {
compatible = "atmel,at91rm9200-udc"; compatible = "atmel,at91sam9263-udc";
reg = <0xfff78000 0x4000>; reg = <0xfff78000 0x4000>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
clocks = <&udc_clk>, <&udpck>; clocks = <&udc_clk>, <&udpck>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment