ARM: ks8695: merge the timer header into the timer driver

This <mach/regs-timer.h> is broadcasted in the entire kernel for
no good reason, since it's only used by the timer driver. Merge
it into the driver.
Tested-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

arch/arm/mach-ks8695/include/mach/regs-timer.h

-/*
- * arch/arm/mach-ks8695/include/mach/regs-timer.h
- *
- * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
- * Copyright (C) 2006 Simtec Electronics
- *
- * KS8695 - Timer registers and bit definitions.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef KS8695_TIMER_H
-#define KS8695_TIMER_H
-
-#define KS8695_TMR_OFFSET	(0xF0000 + 0xE400)
-#define KS8695_TMR_VA		(KS8695_IO_VA + KS8695_TMR_OFFSET)
-#define KS8695_TMR_PA		(KS8695_IO_PA + KS8695_TMR_OFFSET)
-
-
-/*
- * Timer registers
- */
-#define KS8695_TMCON		(0x00)		/* Timer Control Register */
-#define KS8695_T1TC		(0x04)		/* Timer 1 Timeout Count Register */
-#define KS8695_T0TC		(0x08)		/* Timer 0 Timeout Count Register */
-#define KS8695_T1PD		(0x0C)		/* Timer 1 Pulse Count Register */
-#define KS8695_T0PD		(0x10)		/* Timer 0 Pulse Count Register */
-
-
-/* Timer Control Register */
-#define TMCON_T1EN		(1 << 1)	/* Timer 1 Enable */
-#define TMCON_T0EN		(1 << 0)	/* Timer 0 Enable */
-
-/* Timer0 Timeout Counter Register */
-#define T0TC_WATCHDOG		(0xff)		/* Enable watchdog mode */
-
-
-#endif

arch/arm/mach-ks8695/time.c

@@ -29,11 +29,30 @@
 #include <asm/mach/time.h>
 #include <asm/system_misc.h>
 
-#include <mach/regs-timer.h>
 #include <mach/regs-irq.h>
 
 #include "generic.h"
 
+#define KS8695_TMR_OFFSET	(0xF0000 + 0xE400)
+#define KS8695_TMR_VA		(KS8695_IO_VA + KS8695_TMR_OFFSET)
+#define KS8695_TMR_PA		(KS8695_IO_PA + KS8695_TMR_OFFSET)
+
+/*
+ * Timer registers
+ */
+#define KS8695_TMCON		(0x00)		/* Timer Control Register */
+#define KS8695_T1TC		(0x04)		/* Timer 1 Timeout Count Register */
+#define KS8695_T0TC		(0x08)		/* Timer 0 Timeout Count Register */
+#define KS8695_T1PD		(0x0C)		/* Timer 1 Pulse Count Register */
+#define KS8695_T0PD		(0x10)		/* Timer 0 Pulse Count Register */
+
+/* Timer Control Register */
+#define TMCON_T1EN		(1 << 1)	/* Timer 1 Enable */
+#define TMCON_T0EN		(1 << 0)	/* Timer 0 Enable */
+
+/* Timer0 Timeout Counter Register */
+#define T0TC_WATCHDOG		(0xff)		/* Enable watchdog mode */
+
 /*
  * Returns number of ms since last clock interrupt.  Note that interrupts
  * will have been disabled by do_gettimeoffset()