Commit 70ba4d28 authored by Olof Johansson's avatar Olof Johansson

Merge tag 'renesas-boards2-for-v3.12' of...

Merge tag 'renesas-boards2-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards

From Simon Horman:
Second round of Renesas ARM-based SoC board updates for v3.12

* Enable ether on lager board
* Enable GPIO LEDs and switches on ape6evm board

* tag 'renesas-boards2-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: lager: enable Ether
  ARM: shmobile: ape6evm: Add GPIO LEDs
  ARM: shmobile: ape6evm: support GPIO switches
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents 6b08e437 4901e136
......@@ -19,6 +19,8 @@
*/
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/mfd/tmio.h>
......@@ -37,6 +39,58 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
/* LEDS */
static struct gpio_led ape6evm_leds[] = {
{
.name = "gnss-en",
.gpio = 28,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
}, {
.name = "nfc-nrst",
.gpio = 126,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
}, {
.name = "gnss-nrst",
.gpio = 132,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
}, {
.name = "bt-wakeup",
.gpio = 232,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
}, {
.name = "strobe",
.gpio = 250,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
}, {
.name = "bbresetout",
.gpio = 288,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
},
};
static __initdata struct gpio_led_platform_data ape6evm_leds_pdata = {
.leds = ape6evm_leds,
.num_leds = ARRAY_SIZE(ape6evm_leds),
};
/* GPIO KEY */
#define GPIO_KEY(c, g, d, ...) \
{ .code = c, .gpio = g, .desc = d, .active_low = 1 }
static struct gpio_keys_button gpio_buttons[] = {
GPIO_KEY(KEY_0, 324, "S16"),
GPIO_KEY(KEY_MENU, 325, "S17"),
GPIO_KEY(KEY_HOME, 326, "S18"),
GPIO_KEY(KEY_BACK, 327, "S19"),
GPIO_KEY(KEY_VOLUMEUP, 328, "S20"),
GPIO_KEY(KEY_VOLUMEDOWN, 329, "S21"),
};
static struct __initdata gpio_keys_platform_data ape6evm_keys_pdata = {
.buttons = gpio_buttons,
.nbuttons = ARRAY_SIZE(gpio_buttons),
};
/* Dummy supplies, where voltage doesn't matter */
static struct regulator_consumer_supply dummy_supplies[] = {
REGULATOR_SUPPLY("vddvario", "smsc911x"),
......@@ -172,6 +226,12 @@ static void __init ape6evm_add_standard_devices(void)
platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 1,
sdhi1_resources, ARRAY_SIZE(sdhi1_resources),
&sdhi1_pdata, sizeof(sdhi1_pdata));
platform_device_register_data(&platform_bus, "gpio-keys", -1,
&ape6evm_keys_pdata,
sizeof(ape6evm_keys_pdata));
platform_device_register_data(&platform_bus, "leds-gpio", -1,
&ape6evm_leds_pdata,
sizeof(ape6evm_leds_pdata));
}
static const char *ape6evm_boards_compat_dt[] __initdata = {
......
......@@ -31,6 +31,7 @@
#include <linux/platform_device.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/sh_eth.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/r8a7790.h>
......@@ -91,6 +92,20 @@ static struct resource mmcif1_resources[] = {
DEFINE_RES_IRQ(gic_spi(170)),
};
/* Ether */
static struct sh_eth_plat_data ether_pdata __initdata = {
.phy = 0x1,
.edmac_endian = EDMAC_LITTLE_ENDIAN,
.register_type = SH_ETH_REG_FAST_RCAR,
.phy_interface = PHY_INTERFACE_MODE_RMII,
.ether_link_active_low = 1,
};
static struct resource ether_resources[] __initdata = {
DEFINE_RES_MEM(0xee700000, 0x400),
DEFINE_RES_IRQ(gic_spi(162)),
};
static const struct pinctrl_map lager_pinctrl_map[] = {
/* SCIF0 (CN19: DEBUG SERIAL0) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790",
......@@ -103,6 +118,15 @@ static const struct pinctrl_map lager_pinctrl_map[] = {
"mmc1_data8", "mmc1"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.1", "pfc-r8a7790",
"mmc1_ctrl", "mmc1"),
/* Ether */
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
"eth_link", "eth"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
"eth_mdio", "eth"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
"eth_rmii", "eth"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
"intc_irq0", "intc"),
};
static void __init lager_add_standard_devices(void)
......@@ -125,6 +149,11 @@ static void __init lager_add_standard_devices(void)
platform_device_register_resndata(&platform_bus, "sh_mmcif", 1,
mmcif1_resources, ARRAY_SIZE(mmcif1_resources),
&mmcif1_pdata, sizeof(mmcif1_pdata));
platform_device_register_resndata(&platform_bus, "r8a7790-ether", -1,
ether_resources,
ARRAY_SIZE(ether_resources),
&ether_pdata, sizeof(ether_pdata));
}
static const char *lager_boards_compat_dt[] __initdata = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment