Merge tag 'powerpc-4.7-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

 - tm: Always reclaim in start_thread() for exec() class syscalls from
   Cyril Bur

 - tm: Avoid SLB faults in treclaim/trecheckpoint when RI=0 from Michael
   Neuling

 - eeh: Fix wrong argument passed to eeh_rmv_device() from Gavin Shan

 - Initialise pci_io_base as early as possible from Darren Stevens

* tag 'powerpc-4.7-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc: Initialise pci_io_base as early as possible
  powerpc/tm: Avoid SLB faults in treclaim/trecheckpoint when RI=0
  powerpc/eeh: Fix wrong argument passed to eeh_rmv_device()
  powerpc/tm: Always reclaim in start_thread() for exec() class syscalls

arch/powerpc/include/asm/book3s/64/pgtable.h

@@ -230,6 +230,7 @@ extern unsigned long __kernel_virt_size;
 #define KERN_VIRT_SIZE  __kernel_virt_size
 extern struct page *vmemmap;
 extern unsigned long ioremap_bot;
+extern unsigned long pci_io_base;
 #endif /* __ASSEMBLY__ */
 
 #include <asm/book3s/64/hash.h>

arch/powerpc/kernel/eeh_driver.c

@@ -647,7 +647,7 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus,
 			pci_unlock_rescan_remove();
 		}
 	} else if (frozen_bus) {
-		eeh_pe_dev_traverse(pe, eeh_rmv_device, &rmv_data);
+		eeh_pe_dev_traverse(pe, eeh_rmv_device, rmv_data);
 	}
 
 	/*

arch/powerpc/kernel/pci_64.c

@@ -47,7 +47,6 @@ static int __init pcibios_init(void)
 
 	printk(KERN_INFO "PCI: Probing PCI hardware\n");
 
-	pci_io_base = ISA_IO_BASE;
 	/* For now, override phys_mem_access_prot. If we need it,g
 	 * later, we may move that initialization to each ppc_md
 	 */

arch/powerpc/kernel/process.c

@@ -1505,6 +1505,16 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp)
 		current->thread.regs = regs - 1;
 	}
 
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+	/*
+	 * Clear any transactional state, we're exec()ing. The cause is
+	 * not important as there will never be a recheckpoint so it's not
+	 * user visible.
+	 */
+	if (MSR_TM_SUSPENDED(mfmsr()))
+		tm_reclaim_current(0);
+#endif
+
 	memset(regs->gpr, 0, sizeof(regs->gpr));
 	regs->ctr = 0;
 	regs->link = 0;

arch/powerpc/kernel/tm.S

@@ -110,17 +110,11 @@ _GLOBAL(tm_reclaim)
 	std	r3, STK_PARAM(R3)(r1)
 	SAVE_NVGPRS(r1)
 
-	/* We need to setup MSR for VSX register save instructions.  Here we
-	 * also clear the MSR RI since when we do the treclaim, we won't have a
-	 * valid kernel pointer for a while.  We clear RI here as it avoids
-	 * adding another mtmsr closer to the treclaim.  This makes the region
-	 * maked as non-recoverable wider than it needs to be but it saves on
-	 * inserting another mtmsrd later.
-	 */
+	/* We need to setup MSR for VSX register save instructions. */
 	mfmsr	r14
 	mr	r15, r14
 	ori	r15, r15, MSR_FP
-	li	r16, MSR_RI
+	li	r16, 0
 	ori	r16, r16, MSR_EE /* IRQs hard off */
 	andc	r15, r15, r16
 	oris	r15, r15, MSR_VEC@h
@@ -176,7 +170,17 @@ dont_backup_fp:
 1:	tdeqi   r6, 0
 	EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,0
 
-	/* The moment we treclaim, ALL of our GPRs will switch
+	/* Clear MSR RI since we are about to change r1, EE is already off. */
+	li	r4, 0
+	mtmsrd	r4, 1
+
+	/*
+	 * BE CAREFUL HERE:
+	 * At this point we can't take an SLB miss since we have MSR_RI
+	 * off. Load only to/from the stack/paca which are in SLB bolted regions
+	 * until we turn MSR RI back on.
+	 *
+	 * The moment we treclaim, ALL of our GPRs will switch
 	 * to user register state.  (FPRs, CCR etc. also!)
 	 * Use an sprg and a tm_scratch in the PACA to shuffle.
 	 */
@@ -197,6 +201,11 @@ dont_backup_fp:
 
 	/* Store the PPR in r11 and reset to decent value */
 	std	r11, GPR11(r1)			/* Temporary stash */
+
+	/* Reset MSR RI so we can take SLB faults again */
+	li	r11, MSR_RI
+	mtmsrd	r11, 1
+
 	mfspr	r11, SPRN_PPR
 	HMT_MEDIUM
 
@@ -397,11 +406,6 @@ restore_gprs:
 	ld	r5, THREAD_TM_DSCR(r3)
 	ld	r6, THREAD_TM_PPR(r3)
 
-	/* Clear the MSR RI since we are about to change R1.  EE is already off
-	 */
-	li	r4, 0
-	mtmsrd	r4, 1
-
 	REST_GPR(0, r7)				/* GPR0 */
 	REST_2GPRS(2, r7)			/* GPR2-3 */
 	REST_GPR(4, r7)				/* GPR4 */
@@ -439,10 +443,33 @@ restore_gprs:
 	ld	r6, _CCR(r7)
 	mtcr    r6
 
-	REST_GPR(1, r7)				/* GPR1 */
-	REST_GPR(5, r7)				/* GPR5-7 */
 	REST_GPR(6, r7)
-	ld	r7, GPR7(r7)
+
+	/*
+	 * Store r1 and r5 on the stack so that we can access them
+	 * after we clear MSR RI.
+	 */
+
+	REST_GPR(5, r7)
+	std	r5, -8(r1)
+	ld	r5, GPR1(r7)
+	std	r5, -16(r1)
+
+	REST_GPR(7, r7)
+
+	/* Clear MSR RI since we are about to change r1. EE is already off */
+	li	r5, 0
+	mtmsrd	r5, 1
+
+	/*
+	 * BE CAREFUL HERE:
+	 * At this point we can't take an SLB miss since we have MSR_RI
+	 * off. Load only to/from the stack/paca which are in SLB bolted regions
+	 * until we turn MSR RI back on.
+	 */
+
+	ld	r5, -8(r1)
+	ld	r1, -16(r1)
 
 	/* Commit register state as checkpointed state: */
 	TRECHKPT

arch/powerpc/mm/hash_utils_64.c

@@ -922,6 +922,10 @@ void __init hash__early_init_mmu(void)
 	vmemmap = (struct page *)H_VMEMMAP_BASE;
 	ioremap_bot = IOREMAP_BASE;
 
+#ifdef CONFIG_PCI
+	pci_io_base = ISA_IO_BASE;
+#endif
+
 	/* Initialize the MMU Hash table and create the linear mapping
 	 * of memory. Has to be done before SLB initialization as this is
 	 * currently where the page size encoding is obtained.

arch/powerpc/mm/pgtable-radix.c

@@ -328,6 +328,11 @@ void __init radix__early_init_mmu(void)
 	__vmalloc_end = RADIX_VMALLOC_END;
 	vmemmap = (struct page *)RADIX_VMEMMAP_BASE;
 	ioremap_bot = IOREMAP_BASE;
+
+#ifdef CONFIG_PCI
+	pci_io_base = ISA_IO_BASE;
+#endif
+
 	/*
 	 * For now radix also use the same frag size
 	 */