Commit 70e2d422 authored by Andrew Morton's avatar Andrew Morton Committed by Linus Torvalds

[PATCH] MIPS update

From: Ralf Baechle <ralf@linux-mips.org>

- more work on resurrecting AMD Alchemy platforms
- cleanup of unnecessary <asm/pgalloc.h> inclusions
- update default config files
- cleanup 32-bit compat ioctl code
- support for Montum Jaguar ATX
- workarounds for early revs of the RM9000
- fixes for RM5000 and RM7000 cache handling
- add support for PMC-Sierra Yosemite eval board
- further cleanup and bugfixes for SGI IP27
- make LASAT and VR41xx build and work in 2.6
- improved SGI IP32 support
- plenty of small fixes
parent fb4e0779
This diff is collapsed.
......@@ -57,7 +57,7 @@ endif
cflags-y := -I $(TOPDIR)/include/asm/gcc
cflags-y += -G 0 -mno-abicalls -fno-pic -pipe
cflags-y += $(call check_gcc, -finline-limit=100000,)
LDFLAGS_vmlinux += -G 0 -static # -N
LDFLAGS_vmlinux += -G 0 -static -n
MODFLAGS += -mlong-calls
cflags-$(CONFIG_SB1XXX_CORELIS) += -mno-sched-prolog -fno-omit-frame-pointer
......@@ -108,9 +108,14 @@ while :; do \
gas_abi=; gas_opt=; gas_cpu=; gas_isa=; \
break; \
done; \
if test x$(gcc-abi) != x$(gas-abi); then \
if test "$(gcc-abi)" != "$(gas-abi)"; then \
gas_abi="-Wa,-$(gas-abi) -Wa,-mgp$(gcc-abi)"; \
fi; \
if test "$$gcc_opt" = -march= && test -n "$$gcc_abi"; then \
$(CC) $$gcc_abi $$gcc_opt$$gcc_cpu -S -o /dev/null \
-xc /dev/null > /dev/null 2>&1 && \
gcc_isa=; \
fi; \
echo $$gcc_abi $$gcc_opt$$gcc_cpu $$gcc_isa $$gas_abi $$gas_opt$$gas_cpu $$gas_isa)
#
......@@ -237,6 +242,13 @@ libs-$(CONFIG_MIPS_PB1500) += arch/mips/au1000/pb1500/
cflags-$(CONFIG_MIPS_PB1500) += -Iinclude/asm-mips/mach-pb1x00
load-$(CONFIG_MIPS_PB1500) += 0x80100000
#
# AMD Alchemy Pb1550 eval board
#
libs-$(CONFIG_MIPS_PB1550) += arch/mips/au1000/pb1550/
cflags-$(CONFIG_MIPS_PB1550) += -Iinclude/asm-mips/mach-pb1x00
load-$(CONFIG_MIPS_PB1550) += 0x80100000
#
# AMD Alchemy Db1000 eval board
#
......@@ -397,11 +409,12 @@ load-$(CONFIG_MOMENCO_OCELOT_C) += 0x80100000
# Momentum Jaguar ATX
#
core-$(CONFIG_MOMENCO_JAGUAR_ATX) += arch/mips/momentum/jaguar_atx/
ifdef CONFIG_JAGUAR_DMALOW
load-$(CONFIG_MOMENCO_JAGUAR_ATX) += 0x88000000
else
cflags-$(CONFIG_MOMENCO_JAGUAR_ATX) += -Iinclude/asm-mips/mach-ja
#ifdef CONFIG_JAGUAR_DMALOW
#load-$(CONFIG_MOMENCO_JAGUAR_ATX) += 0x88000000
#else
load-$(CONFIG_MOMENCO_JAGUAR_ATX) += 0x80100000
endif
#endif
#
# NEC DDB
......@@ -523,7 +536,7 @@ endif
#
# SGI-IP32 (O2)
#
# Set the load address to >= 0x????????? if you want to leave space for symmon,
# Set the load address to >= 80069000 if you want to leave space for symmon,
# 0x80002000 for production kernels. Note that the value must be aligned to
# a multiple of the kernel stack size or the handling of the current variable
# will break so for 64-bit kernels we have to raise the start address by 8kb.
......
......@@ -6,10 +6,15 @@
# Makefile for the Alchemy Au1000 CPU, generic files.
#
obj-y += prom.o int-handler.o dma.o irq.o puts.o \
time.o reset.o clocks.o power.o setup.o \
sleeper.o
obj-y += prom.o int-handler.o irq.o puts.o time.o reset.o \
au1xxx_irqmap.o clocks.o power.o setup.o sleeper.o
obj-$(CONFIG_AU1X00_USB_DEVICE) += usbdev.o
obj-$(CONFIG_KGDB) += dbg_io.o
obj-$(CONFIG_PCI) += pci.o
ifdef CONFIG_SOC_AU1550
obj-y += dbdma.o
else
obj-y += dma.o
endif
/*
* BRIEF MODULE DESCRIPTION
* Au1xxx processor specific IRQ tables
*
* Copyright 2004 Embedded Edge, LLC
* dan@embeddededge.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/kernel_stat.h>
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/timex.h>
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/delay.h>
#include <asm/bitops.h>
#include <asm/bootinfo.h>
#include <asm/io.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
#include <asm/mach-au1x00/au1000.h>
/* The IC0 interrupt table. This is processor, rather than
* board dependent, so no reason to keep this info in the board
* dependent files.
*
* Careful if you change match 2 request!
* The interrupt handler is called directly from the low level dispatch code.
*/
au1xxx_irq_map_t au1xxx_ic0_map[] = {
#if defined(CONFIG_SOC_AU1000)
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART2_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
#elif defined(CONFIG_SOC_AU1500)
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
#elif defined(CONFIG_SOC_AU1100)
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
{ 2/*AU1000_SD_INT*/, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
/*{ AU1000_GPIO215_208_INT, INTC_INT_HIGH_LEVEL, 0},*/
/*{ AU1000_LCD_INT, INTC_INT_HIGH_LEVEL, 0 },*/
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
#elif defined(CONFIG_SOC_AU1550)
{ AU1550_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_DDMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_CRYPTO_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_RST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PSC0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
{ AU1550_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0},
{ AU1550_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1550_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
#else
#error "Error: Unknown Alchemy SOC"
#endif
};
int au1xxx_ic0_nr_irqs = sizeof(au1xxx_ic0_map)/sizeof(au1xxx_irq_map_t);
This diff is collapsed.
......@@ -73,7 +73,7 @@ struct dma_chan au1000_dma_table[NUM_AU1000_DMA_CHANNELS] = {
};
// Device FIFO addresses and default DMA modes
static const struct {
static const struct dma_dev {
unsigned int fifo_addr;
unsigned int dma_mode;
} dma_dev_table[DMA_NUM_DEV] = {
......@@ -120,12 +120,19 @@ int au1000_dma_read_proc(char *buf, char **start, off_t fpos,
return len;
}
// Device FIFO addresses and default DMA modes - 2nd bank
static const struct dma_dev dma_dev_table_bank2[DMA_NUM_DEV_BANK2] = {
{SD0_XMIT_FIFO, DMA_DS | DMA_DW8}, // coherent
{SD0_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8}, // coherent
{SD1_XMIT_FIFO, DMA_DS | DMA_DW8}, // coherent
{SD1_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8} // coherent
};
void dump_au1000_dma_channel(unsigned int dmanr)
{
struct dma_chan *chan;
if (dmanr > NUM_AU1000_DMA_CHANNELS)
if (dmanr >= NUM_AU1000_DMA_CHANNELS)
return;
chan = &au1000_dma_table[dmanr];
......@@ -156,10 +163,16 @@ int request_au1000_dma(int dev_id, const char *dev_str,
void *irq_dev_id)
{
struct dma_chan *chan;
const struct dma_dev *dev;
int i, ret;
if (dev_id < 0 || dev_id >= DMA_NUM_DEV)
#if defined(CONFIG_SOC_AU1100)
if (dev_id < 0 || dev_id >= (DMA_NUM_DEV + DMA_NUM_DEV_BANK2))
return -EINVAL;
#else
if (dev_id < 0 || dev_id >= DMA_NUM_DEV)
return -EINVAL;
#endif
for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) {
if (au1000_dma_table[i].dev_id < 0)
......@@ -170,6 +183,13 @@ int request_au1000_dma(int dev_id, const char *dev_str,
chan = &au1000_dma_table[i];
if (dev_id >= DMA_NUM_DEV) {
dev_id -= DMA_NUM_DEV;
dev = &dma_dev_table_bank2[dev_id];
} else {
dev = &dma_dev_table[dev_id];
}
if (irqhandler) {
chan->irq = AU1000_DMA_INT_BASE + i;
chan->irq_dev = irq_dev_id;
......@@ -188,8 +208,8 @@ int request_au1000_dma(int dev_id, const char *dev_str,
chan->io = DMA_CHANNEL_BASE + i * DMA_CHANNEL_LEN;
chan->dev_id = dev_id;
chan->dev_str = dev_str;
chan->fifo_addr = dma_dev_table[dev_id].fifo_addr;
chan->mode = dma_dev_table[dev_id].dma_mode;
chan->fifo_addr = dev->fifo_addr;
chan->mode = dev->dma_mode;
/* initialize the channel before returning */
init_dma(i);
......
This diff is collapsed.
......@@ -35,10 +35,6 @@
#include <linux/init.h>
#include <asm/mach-au1x00/au1000.h>
//#include <asm/pb1500.h>
#ifdef CONFIG_MIPS_PB1000
#include <asm/mach-pb1x00/pb1000.h>
#endif
#include <asm/pci_channel.h>
/* TBD */
......@@ -64,13 +60,13 @@ static struct pci_controller au1x_controller = {
.mem_resource = &pci_mem_resource,
};
#ifdef CONFIG_SOC_AU1500
#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
static unsigned long virt_io_addr;
#endif
static int __init au1x_pci_setup(void)
{
#ifdef CONFIG_SOC_AU1500
#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
int i;
struct pci_dev *dev;
......@@ -93,20 +89,8 @@ static int __init au1x_pci_setup(void)
set_io_port_base(virt_io_addr);
#endif
#ifdef CONFIG_MIPS_PB1000 /* This is truly board specific */
unsigned long pci_mem_start = (unsigned long) PCI_MEM_START;
au_writel(0, PCI_BRIDGE_CONFIG); // set extend byte to 0
au_writel(0, SDRAM_MBAR); // set mbar to 0
au_writel(0x2, SDRAM_CMD); // enable memory accesses
au_sync_delay(1);
// set extend byte to mbar of ext slot
au_writel(((pci_mem_start >> 24) & 0xff) |
(1 << 8 | 1 << 9 | 1 << 10 | 1 << 27), PCI_BRIDGE_CONFIG);
#endif
register_pci_controller(&au1x_controller);
return 0;
}
arch_initcall(au1x_pci_setup);
......@@ -358,7 +358,7 @@ static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
old_cpu_freq = get_au1x00_speed();
new_cpu_freq = pll * 12 * 1000000;
new_baud_base = (new_cpu_freq / 4) / 16;
new_baud_base = (new_cpu_freq / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16));
set_au1x00_speed(new_cpu_freq);
set_au1x00_uart_baud_base(new_baud_base);
......
......@@ -121,6 +121,29 @@ void au1000_restart(char *command)
au_writel(0x00, 0xb1900064); /* sys_auxpll */
au_writel(0x00, 0xb1900100); /* sys_pininputen */
break;
case 0x03000000: /* Au1550 */
au_writel(0x00, 0xb1a00004); /* psc 0 */
au_writel(0x00, 0xb1b00004); /* psc 1 */
au_writel(0x00, 0xb0a00004); /* psc 2 */
au_writel(0x00, 0xb0b00004); /* psc 3 */
au_writel(0x00, 0xb017fffc); /* usbh_enable */
au_writel(0x00, 0xb0200058); /* usbd_enable */
au_writel(0x00, 0xb4004104); /* mac dma */
au_writel(0x00, 0xb4004114); /* mac dma */
au_writel(0x00, 0xb4004124); /* mac dma */
au_writel(0x00, 0xb4004134); /* mac dma */
au_writel(0x00, 0xb1520000); /* macen0 */
au_writel(0x00, 0xb1520004); /* macen1 */
au_writel(0x00, 0xb1100100); /* uart0_enable */
au_writel(0x00, 0xb1200100); /* uart1_enable */
au_writel(0x00, 0xb1400100); /* uart3_enable */
au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
au_writel(0x00, 0xb1900028); /* sys_clksrc */
au_writel(0x10, 0xb1900060); /* sys_cpupll */
au_writel(0x00, 0xb1900064); /* sys_auxpll */
au_writel(0x00, 0xb1900100); /* sys_pininputen */
break;
default:
break;
......@@ -137,12 +160,28 @@ void au1000_restart(char *command)
au_writel(0x00000000, 0xAE00001C);
#endif
#if defined(CONFIG_MIPS_PB1550)
/* reset entire system */
au_writew(au_readw(0xAF00001C) & ~(1<<15), 0xAF00001C);
au_sync();
#endif
__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
}
void au1000_halt(void)
{
#if defined(CONFIG_MIPS_PB1550)
/* power off system */
printk("\n** Powering off Pb1550\n");
au_writew(au_readw(0xAF00001C) | (3<<14), 0xAF00001C);
au_sync();
while(1); /* should not get here */
#endif
printk(KERN_NOTICE "\n** You can safely turn off the power\n");
#ifdef CONFIG_MIPS_MIRAGE
au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT);
#endif
#ifdef CONFIG_PM
au_sleep();
......
......@@ -56,7 +56,7 @@ extern void (*board_time_init)(void);
extern void au1x_time_init(void);
extern void (*board_timer_setup)(struct irqaction *irq);
extern void au1x_timer_setup(struct irqaction *irq);
#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_SOC_AU1500)
#if defined(CONFIG_64BIT_PHYS_ADDR) && (defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550))
extern phys_t (*fixup_bigphys_addr)(phys_t phys_addr, phys_t size);
static phys_t au1500_fixup_bigphys_addr(phys_t phys_addr, phys_t size);
#endif
......@@ -66,12 +66,47 @@ extern void au1xxx_timer_setup(struct irqaction *irq);
static int __init au1x00_setup(void)
{
char *argptr;
unsigned long prid, cpupll, bclk = 1;
/* Various early Au1000 Errata corrected by this */
set_c0_config(1<<19); /* Config[OD] */
board_setup(); /* board specific setup */
prid = read_c0_prid();
switch (prid)
{
case 0x00030100: printk("Au1000 DA "); bclk = 0; break;
case 0x00030201: printk("Au1000 HA "); bclk = 0; break;
case 0x00030202: printk("Au1000 HB "); bclk = 0; break;
case 0x00030203: printk("Au1000 HC "); break;
case 0x00030204: printk("Au1000 HD "); break;
case 0x01030200: printk("Au1500 AB "); break;
case 0x01030201: printk("Au1500 AC "); break;
case 0x01030202: printk("Au1500 AD "); break;
case 0x02030200: printk("Au1100 AB "); break;
case 0x02030201: printk("Au1100 BA "); break;
case 0x02030202: printk("Au1100 BC "); break;
case 0x02030203: printk("Au1100 BD "); break;
case 0x02030204: printk("Au1100 BE "); break;
case 0x03030200: printk("Au1550 AA "); break;
default: printk("Unknown Au1x00! "); bclk = 0; break;
}
cpupll = (au_readl(0xB1900060) & 0x3F) * 12;
printk("(PRId %08X) @ %dMHZ\n", prid, cpupll);
if (bclk)
{
/* Enable BCLK switching */
bclk = au_readl(0xB190003C);
au_writel(bclk | 0x60, 0xB190003C);
printk("BCLK switching enabled!\n");
}
argptr = prom_getcmdline();
#ifdef CONFIG_SERIAL_AU1X00_CONSOLE
......@@ -122,7 +157,7 @@ static int __init au1x00_setup(void)
_machine_power_off = au1000_power_off;
board_time_init = au1xxx_time_init;
board_timer_setup = au1xxx_timer_setup;
#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_SOC_AU1500)
#if defined(CONFIG_64BIT_PHYS_ADDR) && (defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550))
fixup_bigphys_addr = au1500_fixup_bigphys_addr;
#endif
......@@ -173,7 +208,7 @@ static int __init au1x00_setup(void)
early_initcall(au1x00_setup);
#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_SOC_AU1500)
#if defined(CONFIG_64BIT_PHYS_ADDR) && (defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550))
/* This routine should be valid for all Au1500 based boards */
static phys_t au1500_fixup_bigphys_addr(phys_t phys_addr, phys_t size)
{
......
......@@ -5,10 +5,4 @@
# Makefile for the Cogent CSB250 Au1500 board. Copied from Pb1500.
#
USE_STANDARD_AS_RULE := true
O_TARGET := csb250.o
obj-y := init.o board_setup.o irqmap.o
include $(TOPDIR)/Rules.make
......@@ -48,53 +48,13 @@
#include <asm/au1000.h>
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
/* Careful if you change match 2 request!
* The interrupt handler is called directly
* from the low level dispatch code.
*/
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
};
int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
......@@ -6,3 +6,4 @@
# Makefile for the Alchemy Semiconductor Db1x00 board.
lib-y := init.o board_setup.o irqmap.o
obj-$(CONFIG_WM97XX_COMODULE) += mirage_ts.o
......@@ -45,6 +45,7 @@
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/db1x00.h>
/* not correct for db1550 */
static BCSR * const bcsr = (BCSR *)0xAE000000;
void __init board_setup(void)
......@@ -52,6 +53,7 @@ void __init board_setup(void)
u32 pin_func;
pin_func = 0;
/* not valid for 1550 */
#ifdef CONFIG_AU1X00_USB_DEVICE
// 2nd USB port is USB device
pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
......@@ -69,6 +71,35 @@ void __init board_setup(void)
#endif
au_writel(0, 0xAE000010); /* turn off pcmcia power */
#ifdef CONFIG_MIPS_MIRAGE
/* enable GPIO[31:0] inputs */
au_writel(0, SYS_PININPUTEN);
/* GPIO[20] is output, tristate the other input primary GPIO's */
au_writel((u32)(~(1<<20)), SYS_TRIOUTCLR);
/* set GPIO[210:208] instead of SSI_0 */
pin_func = au_readl(SYS_PINFUNC) | (u32)(1);
/* set GPIO[215:211] for LED's */
pin_func |= (u32)((5<<2));
/* set GPIO[214:213] for more LED's */
pin_func |= (u32)((5<<12));
/* set GPIO[207:200] instead of PCMCIA/LCD */
pin_func |= (u32)((3<<17));
au_writel(pin_func, SYS_PINFUNC);
/* Enable speaker amplifier. This should
* be part of the audio driver.
*/
au_writel(au_readl(GPIO2_DIR) | 0x200, GPIO2_DIR);
au_writel(0x02000200, GPIO2_OUTPUT);
#endif
au_sync();
#ifdef CONFIG_MIPS_DB1000
printk("AMD Alchemy Au1000/Db1000 Board\n");
#endif
......@@ -84,4 +115,7 @@ void __init board_setup(void)
#ifdef CONFIG_MIPS_MIRAGE
printk("AMD Alchemy Mirage Board\n");
#endif
#ifdef CONFIG_MIPS_DB1550
printk("AMD Alchemy Au1550/Db1550 Board\n");
#endif
}
......@@ -49,75 +49,24 @@
#include <asm/mach-au1x00/au1000.h>
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_MIRAGE)
{ AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
#endif
#ifndef CONFIG_MIPS_MIRAGE
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
#endif
#ifdef CONFIG_MIPS_DB1550
{ AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 IRQ# */
{ AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 IRQ# */
#else
{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 Fully_Interted# */
{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 STSCHG# */
{ AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 IRQ# */
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
#ifdef CONFIG_SOC_AU1500
{ AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 Fully_Interted# */
{ AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 STSCHG# */
{ AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 IRQ# */
#endif
#ifdef CONFIG_MIPS_DB1500
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
#else
{ AU1000_GPIO_7, INTC_INT_RISE_EDGE, 0 }, /* touchscreen pen down */
#endif
#ifndef CONFIG_MIPS_MIRAGE
{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 0 Fully_Interted#
{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 0 STSCHG#
{ AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 0 IRQ#
{ AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 1 Fully_Interted#
{ AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 1 STSCHG#
{ AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 1 IRQ#
#endif
{ AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 0 IRQ#
{ AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 1 IRQ#
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
/* Careful if you change match 2 request!
* The interrupt handler is called directly
* from the low level dispatch code.
*/
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
};
int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
/*
* linux/arch/mips/au1000/db1x00/mirage_ts.c
*
* BRIEF MODULE DESCRIPTION
* Glue between Mirage board-specific touchscreen pieces
* and generic Wolfson Codec touchscreen support.
*
* Based on pb1100_ts.c used in Hydrogen II.
*
* Copyright (c) 2003 Embedded Edge, LLC
* dan@embeddededge.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/config.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/poll.h>
#include <linux/proc_fs.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
#include <asm/segment.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <asm/delay.h>
#include <asm/au1000.h>
/*
* Imported interface to Wolfson Codec driver.
*/
extern void *wm97xx_ts_get_handle(int which);
extern int wm97xx_ts_ready(void* ts_handle);
extern void wm97xx_ts_set_cal(void* ts_handle, int xscale, int xtrans, int yscale, int ytrans);
extern u16 wm97xx_ts_get_ac97(void* ts_handle, u8 reg);
extern void wm97xx_ts_set_ac97(void* ts_handle, u8 reg, u16 val);
extern int wm97xx_ts_read_data(void* ts_handle, long* x, long* y, long* pressure);
extern void wm97xx_ts_send_data(void* ts_handle, long x, long y, long z);
int wm97xx_comodule_present = 1;
#define TS_NAME "mirage_ts"
#define err(format, arg...) printk(KERN_ERR TS_NAME ": " format "\n" , ## arg)
#define info(format, arg...) printk(KERN_INFO TS_NAME ": " format "\n" , ## arg)
#define warn(format, arg...) printk(KERN_WARNING TS_NAME ": " format "\n" , ## arg)
#define DPRINTK(format, arg...) printk(__FUNCTION__ ": " format "\n" , ## arg)
#define PEN_DOWN_IRQ AU1000_GPIO_7
static struct task_struct *ts_task = 0;
static DECLARE_COMPLETION(ts_complete);
static DECLARE_WAIT_QUEUE_HEAD(pendown_wait);
#ifdef CONFIG_WM97XX_FIVEWIRETS
static int release_pressure = 1;
#else
static int release_pressure = 50;
#endif
typedef struct {
long x;
long y;
} DOWN_EVENT;
#define SAMPLE_RATE 50 /* samples per second */
#define PEN_DEBOUNCE 5 /* samples for settling - fn of SAMPLE_RATE */
#define PEN_UP_TIMEOUT 10 /* in seconds */
#define PEN_UP_SETTLE 5 /* samples per second */
static struct {
int xscale;
int xtrans;
int yscale;
int ytrans;
} mirage_ts_cal =
{
#if 0
xscale: 84,
xtrans: -157,
yscale: 66,
ytrans: -150,
#else
xscale: 84,
xtrans: -150,
yscale: 66,
ytrans: -146,
#endif
};
static void pendown_irq(int irqnr, void *devid, struct pt_regs *regs)
{
//DPRINTK("got one 0x%x", au_readl(SYS_PINSTATERD));
wake_up(&pendown_wait);
}
static int ts_thread(void *id)
{
static int pen_was_down = 0;
static DOWN_EVENT pen_xy;
long x, y, z;
void *ts; /* handle */
struct task_struct *tsk = current;
int timeout = HZ / SAMPLE_RATE;
ts_task = tsk;
daemonize();
tsk->tty = NULL;
tsk->policy = SCHED_FIFO;
tsk->rt_priority = 1;
strcpy(tsk->comm, "touchscreen");
/* only want to receive SIGKILL */
spin_lock_irq(&tsk->sigmask_lock);
siginitsetinv(&tsk->blocked, sigmask(SIGKILL));
recalc_sigpending(tsk);
spin_unlock_irq(&tsk->sigmask_lock);
/* get handle for codec */
ts = wm97xx_ts_get_handle(0);
/* proceed only after everybody is ready */
while ( ! wm97xx_ts_ready(ts) ) {
/* give a little time for initializations to complete */
interruptible_sleep_on_timeout(&pendown_wait, HZ / 4);
}
/* board-specific calibration */
wm97xx_ts_set_cal(ts,
mirage_ts_cal.xscale,
mirage_ts_cal.xtrans,
mirage_ts_cal.yscale,
mirage_ts_cal.ytrans);
/* route Wolfson pendown interrupts to our GPIO */
au_sync();
wm97xx_ts_set_ac97(ts, 0x4c, wm97xx_ts_get_ac97(ts, 0x4c) & ~0x0008);
au_sync();
wm97xx_ts_set_ac97(ts, 0x56, wm97xx_ts_get_ac97(ts, 0x56) & ~0x0008);
au_sync();
wm97xx_ts_set_ac97(ts, 0x52, wm97xx_ts_get_ac97(ts, 0x52) | 0x2008);
au_sync();
for (;;) {
interruptible_sleep_on_timeout(&pendown_wait, timeout);
disable_irq(PEN_DOWN_IRQ);
if (signal_pending(tsk)) {
break;
}
/* read codec */
if (!wm97xx_ts_read_data(ts, &x, &y, &z))
z = 0; /* treat no-data and pen-up the same */
if (signal_pending(tsk)) {
break;
}
if (z >= release_pressure) {
y = ~y; /* top to bottom */
if (pen_was_down > 1 /*&& pen_was_down < PEN_DEBOUNCE*/) {//THXXX
/* bounce ? */
x = pen_xy.x;
y = pen_xy.y;
--pen_was_down;
} else if (pen_was_down <= 1) {
pen_xy.x = x;
pen_xy.y = y;
if (pen_was_down)
wm97xx_ts_send_data(ts, x, y, z);
pen_was_down = PEN_DEBOUNCE;
}
//wm97xx_ts_send_data(ts, x, y, z);
timeout = HZ / SAMPLE_RATE;
} else {
if (pen_was_down) {
if (--pen_was_down)
z = release_pressure;
else //THXXX
wm97xx_ts_send_data(ts, pen_xy.x, pen_xy.y, z);
}
/* The pendown signal takes some time to settle after
* reading the pen pressure so wait a little
* before enabling the pen.
*/
if (! pen_was_down) {
// interruptible_sleep_on_timeout(&pendown_wait, HZ / PEN_UP_SETTLE);
timeout = HZ * PEN_UP_TIMEOUT;
}
}
enable_irq(PEN_DOWN_IRQ);
}
enable_irq(PEN_DOWN_IRQ);
ts_task = NULL;
complete(&ts_complete);
return 0;
}
static int __init ts_mirage_init(void)
{
int ret;
/* pen down signal is connected to GPIO 7 */
ret = request_irq(PEN_DOWN_IRQ, pendown_irq, 0, "ts-pendown", NULL);
if (ret) {
err("unable to get pendown irq%d: [%d]", PEN_DOWN_IRQ, ret);
return ret;
}
lock_kernel();
ret = kernel_thread(ts_thread, NULL, CLONE_FS | CLONE_FILES);
if (ret < 0) {
unlock_kernel();
return ret;
}
unlock_kernel();
info("Mirage touchscreen IRQ initialized.");
return 0;
}
static void __exit ts_mirage_exit(void)
{
if (ts_task) {
send_sig(SIGKILL, ts_task, 1);
wait_for_completion(&ts_complete);
}
free_irq(PEN_DOWN_IRQ, NULL);
}
module_init(ts_mirage_init);
module_exit(ts_mirage_exit);
......@@ -6,13 +6,4 @@
# Makefile for the Alchemy Semiconductor PB1000 board.
#
.S.s:
$(CPP) $(CFLAGS) $< -o $*.s
.S.o:
$(CC) $(CFLAGS) -c $< -o $*.o
O_TARGET := hydrogen3.o
obj-y := init.o board_setup.o irqmap.o
include $(TOPDIR)/Rules.make
......@@ -44,7 +44,6 @@
#include <asm/reboot.h>
#include <asm/pgtable.h>
#include <asm/au1000.h>
#include <asm/db1x00.h>
extern struct rtc_ops no_rtc_ops;
......
......@@ -48,43 +48,9 @@
#include <asm/au1000.h>
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
// { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
/* Careful if you change match 2 request!
* The interrupt handler is called directly
* from the low level dispatch code.
*/
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
/* { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, */
{ AU1000_GPIO_21, INTC_INT_LOW_LEVEL, 0 },
};
int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
......@@ -47,47 +47,10 @@
#include <asm/system.h>
#include <asm/au1000.h>
/* Need to define this.
*/
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
/* Careful if you change match 2 request!
* The interrupt handler is called directly
* from the low level dispatch code.
*/
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
{ 0. 0. 0}
};
int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
int au1xxx_nr_irqs = 0;
......@@ -48,49 +48,7 @@
#include <asm/au1000.h>
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART2_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_GPIO_15, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
/* Careful if you change match 2 request!
* The interrupt handler is called directly
* from the low level dispatch code.
*/
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
};
int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
......@@ -48,53 +48,10 @@
#include <asm/au1000.h>
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_GPIO_9, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card Fully_Interted#
{ AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card STSCHG#
{ AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card IRQ#
{ AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, // DC_IRQ#
{ AU1000_GPIO_23, INTC_INT_LOW_LEVEL, 0 }, // 2-wire SCL
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
/* Careful if you change match 2 request!
* The interrupt handler is called directly
* from the low level dispatch code.
*/
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
};
int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
......@@ -48,53 +48,11 @@
#include <asm/mach-au1x00/au1000.h>
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
/* Careful if you change match 2 request!
* The interrupt handler is called directly
* from the low level dispatch code.
*/
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
};
int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
......@@ -6,13 +6,4 @@
# Makefile for the Alchemy Semiconductor PB1000 board.
#
.S.s:
$(CPP) $(CFLAGS) $< -o $*.s
.S.o:
$(CC) $(CFLAGS) -c $< -o $*.o
O_TARGET := pb1550.o
obj-y := init.o board_setup.o irqmap.o
include $(TOPDIR)/Rules.make
lib-y := init.o board_setup.o irqmap.o
......@@ -39,29 +39,26 @@
#include <asm/cpu.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
#include <asm/keyboard.h>
#include <asm/mipsregs.h>
#include <asm/reboot.h>
#include <asm/pgtable.h>
#include <asm/au1000.h>
#include <asm/db1x00.h>
extern struct rtc_ops no_rtc_ops;
static BCSR * const bcsr = (BCSR *)0xB3000000;
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1550.h>
void __init board_setup(void)
{
u32 pin_func;
rtc_ops = &no_rtc_ops;
#ifdef CONFIG_AU1X00_USB_DEVICE
// 2nd USB port is USB device
pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
/* Enable PSC1 SYNC for AC97. Normaly done in audio driver,
* but it is board specific code, so put it here.
*/
pin_func = au_readl(SYS_PINFUNC);
au_sync();
pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
au_writel(pin_func, SYS_PINFUNC);
#endif
au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
au_sync();
printk("AMD Alchemy Pb1550 Board\n");
printk("AMD Alchemy Pb1550 Board\n");
}
......@@ -27,17 +27,14 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/bootmem.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
#include <linux/config.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/sched.h>
int prom_argc;
char **prom_argv, **prom_envp;
......@@ -46,28 +43,27 @@ extern char *prom_getenv(char *envname);
const char *get_system_type(void)
{
return "AMD Alchemy PbAu1550";
return "Alchemy Pb1550";
}
int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
void __init prom_init(void)
{
unsigned char *memsize_str;
unsigned long memsize;
prom_argc = argc;
prom_argv = argv;
prom_envp = envp;
prom_argc = (int) fw_arg0;
prom_argv = (char **) fw_arg1;
prom_envp = (char **) fw_arg2;
mips_machgroup = MACH_GROUP_ALCHEMY;
mips_machtype = MACH_PB1000; /* set the platform # */
prom_init_cmdline();
mips_machtype = MACH_PB1550;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
if (!memsize_str) {
memsize = 0x04000000;
memsize = 0x08000000;
} else {
memsize = simple_strtol(memsize_str, NULL, 0);
}
add_memory_region(0, memsize, BOOT_MEM_RAM);
return 0;
}
......@@ -45,49 +45,11 @@
#include <asm/io.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
#include <asm/au1000.h>
#include <asm/mach-au1x00/au1000.h>
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1550_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_DDMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_CRYPTO_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_RST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PSC0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_TOY_MATCH0_INT,INTC_INT_RISE_EDGE, 0 },
{ AU1550_TOY_MATCH1_INT,INTC_INT_RISE_EDGE, 0 },
/* Careful if you change match 2 request!
* The interrupt handler is called directly
* from the low level dispatch code.
*/
{ AU1550_TOY_MATCH2_INT,INTC_INT_RISE_EDGE, 0 },
{ AU1550_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_RTC_MATCH0_INT,INTC_INT_RISE_EDGE, 0 },
{ AU1550_RTC_MATCH1_INT,INTC_INT_RISE_EDGE, 0 },
{ AU1550_RTC_MATCH2_INT,INTC_INT_RISE_EDGE, 0 },
{ AU1550_RTC_MATCH2_INT,INTC_INT_RISE_EDGE, 0 },
{ AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_USB_DEV_REQ_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1550_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
/*
* Need to define platform dependant GPIO ints here
*/
#warning PbAu1550 needs GPIO Interrupts defined
{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 },
};
int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
......@@ -48,29 +48,7 @@
#include <asm/au1000.h>
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
......@@ -83,24 +61,6 @@ au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, /* CF interrupt */
{ AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
/* Careful if you change match 2 request!
* The interrupt handler is called directly
* from the low level dispatch code.
*/
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
};
int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
......@@ -12,7 +12,6 @@
#include <asm/bootinfo.h>
#include <asm/mipsregs.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/baget/baget.h>
......
......@@ -22,6 +22,7 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
......@@ -50,7 +51,6 @@ CONFIG_IOSCHED_DEADLINE=y
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_LASAT is not set
# CONFIG_HP_LASERJET is not set
# CONFIG_MIPS_ITE8172 is not set
CONFIG_MIPS_ATLAS=y
# CONFIG_MIPS_MALTA is not set
......@@ -122,7 +122,6 @@ CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_MMU=y
# CONFIG_HOTPLUG is not set
#
# Executable file formats
......@@ -165,6 +164,7 @@ CONFIG_TRAD_SIGNALS=y
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
......@@ -198,6 +198,12 @@ CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
#
# SCSI low-level drivers
#
......@@ -246,7 +252,7 @@ CONFIG_SCSI_QLA2XXX=y
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
......@@ -255,10 +261,6 @@ CONFIG_SCSI_QLA2XXX=y
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
#
# Networking support
#
......@@ -282,7 +284,6 @@ CONFIG_IP_PNP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
......@@ -297,7 +298,6 @@ CONFIG_XFRM=y
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
......@@ -384,6 +384,7 @@ CONFIG_NET_ETHERNET=y
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# Wan interfaces
......@@ -404,11 +405,13 @@ CONFIG_NET_ETHERNET=y
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
# CONFIG_ISDN is not set
#
# Telephony Support
......@@ -474,12 +477,8 @@ CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
......@@ -491,7 +490,6 @@ CONFIG_UNIX98_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
......@@ -511,6 +509,10 @@ CONFIG_UNIX98_PTY_COUNT=256
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
......@@ -581,7 +583,6 @@ CONFIG_EXT2_FS=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
......@@ -594,6 +595,7 @@ CONFIG_RAMFS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
......@@ -617,7 +619,7 @@ CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
......
......@@ -22,6 +22,7 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
......@@ -55,7 +56,6 @@ CONFIG_KMOD=y
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_LASAT is not set
# CONFIG_HP_LASERJET is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
......@@ -117,12 +117,12 @@ CONFIG_CPU_HAS_SYNC=y
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_MMU=y
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=m
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_TCIC is not set
#
......@@ -167,7 +167,6 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
......@@ -190,7 +189,7 @@ CONFIG_BLK_DEV_LOOP=y
#
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
......@@ -198,10 +197,6 @@ CONFIG_BLK_DEV_LOOP=y
# I2O device support
#
#
# Macintosh device drivers
#
#
# Networking support
#
......@@ -226,7 +221,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
......@@ -257,7 +251,6 @@ CONFIG_XFRM=y
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
......@@ -320,6 +313,7 @@ CONFIG_PPPOE=m
# Token Ring devices
#
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# Wan interfaces
......@@ -353,11 +347,13 @@ CONFIG_PCMCIA_3C589=m
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
# CONFIG_ISDN is not set
#
# Telephony Support
......@@ -417,12 +413,8 @@ CONFIG_HW_CONSOLE=y
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
......@@ -434,7 +426,6 @@ CONFIG_UNIX98_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
......@@ -458,6 +449,10 @@ CONFIG_RTC=y
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
......@@ -537,7 +532,6 @@ CONFIG_AUTOFS4_FS=m
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
......@@ -550,6 +544,7 @@ CONFIG_RAMFS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
......@@ -574,7 +569,7 @@ CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
......@@ -662,7 +657,9 @@ CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_TEST is not set
#
......
......@@ -22,6 +22,7 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
......@@ -62,7 +63,6 @@ CONFIG_ZAO_CAPCELLA=y
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_LASAT is not set
# CONFIG_HP_LASERJET is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
......@@ -126,7 +126,6 @@ CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_MMU=y
# CONFIG_HOTPLUG is not set
#
# Executable file formats
......@@ -167,8 +166,8 @@ CONFIG_TRAD_SIGNALS=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
......@@ -211,9 +210,10 @@ CONFIG_IDE_GENERIC=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
......@@ -222,10 +222,6 @@ CONFIG_IDE_GENERIC=y
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
#
# Networking support
#
......@@ -250,7 +246,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
......@@ -265,7 +260,6 @@ CONFIG_XFRM=y
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
......@@ -351,6 +345,7 @@ CONFIG_NET_ETHERNET=y
# CONFIG_TR is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# Wan interfaces
......@@ -371,11 +366,13 @@ CONFIG_NET_ETHERNET=y
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
# CONFIG_ISDN is not set
#
# Telephony Support
......@@ -441,12 +438,8 @@ CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
......@@ -470,7 +463,6 @@ CONFIG_WATCHDOG=y
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
......@@ -490,6 +482,10 @@ CONFIG_WATCHDOG=y
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
......@@ -560,7 +556,6 @@ CONFIG_AUTOFS4_FS=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
......@@ -573,6 +568,7 @@ CONFIG_RAMFS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
......@@ -597,7 +593,7 @@ CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
......
......@@ -22,6 +22,7 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
......@@ -50,7 +51,6 @@ CONFIG_MIPS_COBALT=y
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_LASAT is not set
# CONFIG_HP_LASERJET is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
......@@ -118,7 +118,6 @@ CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_MMU=y
# CONFIG_HOTPLUG is not set
#
# Executable file formats
......@@ -160,8 +159,8 @@ CONFIG_TRAD_SIGNALS=y
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
......@@ -204,9 +203,10 @@ CONFIG_IDE_GENERIC=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
......@@ -215,10 +215,6 @@ CONFIG_IDE_GENERIC=y
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
#
# Networking support
#
......@@ -239,7 +235,6 @@ CONFIG_INET=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
......@@ -254,7 +249,6 @@ CONFIG_XFRM=y
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
......@@ -340,6 +334,7 @@ CONFIG_NET_ETHERNET=y
# CONFIG_TR is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# Wan interfaces
......@@ -360,11 +355,13 @@ CONFIG_NET_ETHERNET=y
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
# CONFIG_ISDN is not set
#
# Telephony Support
......@@ -430,12 +427,8 @@ CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=16
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
......@@ -447,7 +440,6 @@ CONFIG_UNIX98_PTY_COUNT=16
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
......@@ -466,6 +458,10 @@ CONFIG_RTC=y
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
......@@ -540,7 +536,6 @@ CONFIG_FS_POSIX_ACL=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
......@@ -553,6 +548,7 @@ CONFIG_RAMFS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
......@@ -574,7 +570,7 @@ CONFIG_NFS_FS=y
CONFIG_LOCKD=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
......
......@@ -22,6 +22,7 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
......@@ -55,7 +56,6 @@ CONFIG_KMOD=y
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_LASAT is not set
# CONFIG_HP_LASERJET is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
......@@ -75,12 +75,15 @@ CONFIG_SOC_AU1X00=y
CONFIG_SOC_AU1000=y
# CONFIG_SOC_AU1100 is not set
# CONFIG_SOC_AU1500 is not set
# CONFIG_SOC_AU1550 is not set
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
# CONFIG_MIPS_PB1550 is not set
CONFIG_MIPS_DB1000=y
# CONFIG_MIPS_DB1100 is not set
# CONFIG_MIPS_DB1500 is not set
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_BOSPORUS is not set
# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_XXS1500 is not set
......@@ -132,12 +135,12 @@ CONFIG_CPU_HAS_SYNC=y
#
# CONFIG_PCI is not set
CONFIG_MMU=y
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=m
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_TCIC is not set
# CONFIG_PCMCIA_AU1X00 is not set
......@@ -183,7 +186,6 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
......@@ -206,7 +208,7 @@ CONFIG_BLK_DEV_LOOP=y
#
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
......@@ -214,10 +216,6 @@ CONFIG_BLK_DEV_LOOP=y
# I2O device support
#
#
# Macintosh device drivers
#
#
# Networking support
#
......@@ -242,7 +240,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
......@@ -273,7 +270,6 @@ CONFIG_XFRM=y
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
......@@ -337,6 +333,7 @@ CONFIG_PPPOE=m
# Token Ring devices
#
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# Wan interfaces
......@@ -370,11 +367,13 @@ CONFIG_PCMCIA_3C589=m
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
# CONFIG_ISDN is not set
#
# Telephony Support
......@@ -440,12 +439,8 @@ CONFIG_SERIAL_AU1X00_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
......@@ -457,7 +452,6 @@ CONFIG_UNIX98_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
......@@ -481,6 +475,10 @@ CONFIG_RTC=y
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
......@@ -560,7 +558,6 @@ CONFIG_AUTOFS4_FS=m
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
......@@ -573,6 +570,7 @@ CONFIG_RAMFS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
......@@ -597,7 +595,7 @@ CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
......@@ -685,7 +683,9 @@ CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_TEST is not set
#
......
......@@ -22,6 +22,7 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
......@@ -55,7 +56,6 @@ CONFIG_KMOD=y
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_LASAT is not set
# CONFIG_HP_LASERJET is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
......@@ -75,12 +75,15 @@ CONFIG_SOC_AU1X00=y
# CONFIG_SOC_AU1000 is not set
CONFIG_SOC_AU1100=y
# CONFIG_SOC_AU1500 is not set
# CONFIG_SOC_AU1550 is not set
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
# CONFIG_MIPS_PB1550 is not set
# CONFIG_MIPS_DB1000 is not set
CONFIG_MIPS_DB1100=y
# CONFIG_MIPS_DB1500 is not set
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_BOSPORUS is not set
# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_XXS1500 is not set
......@@ -131,12 +134,12 @@ CONFIG_CPU_HAS_SYNC=y
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_MMU=y
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=m
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_TCIC is not set
# CONFIG_PCMCIA_AU1X00 is not set
......@@ -182,7 +185,6 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
......@@ -205,7 +207,7 @@ CONFIG_BLK_DEV_LOOP=y
#
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
......@@ -213,10 +215,6 @@ CONFIG_BLK_DEV_LOOP=y
# I2O device support
#
#
# Macintosh device drivers
#
#
# Networking support
#
......@@ -241,7 +239,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
......@@ -272,7 +269,6 @@ CONFIG_XFRM=y
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
......@@ -336,6 +332,7 @@ CONFIG_PPPOE=m
# Token Ring devices
#
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# Wan interfaces
......@@ -369,11 +366,13 @@ CONFIG_PCMCIA_3C589=m
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
# CONFIG_ISDN is not set
#
# Telephony Support
......@@ -436,12 +435,8 @@ CONFIG_HW_CONSOLE=y
#
# CONFIG_SERIAL_AU1X00 is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
......@@ -453,7 +448,6 @@ CONFIG_UNIX98_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
......@@ -477,6 +471,10 @@ CONFIG_RTC=y
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
......@@ -556,7 +554,6 @@ CONFIG_AUTOFS4_FS=m
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
......@@ -569,6 +566,7 @@ CONFIG_RAMFS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
......@@ -593,7 +591,7 @@ CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
......@@ -681,7 +679,9 @@ CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_TEST is not set
#
......
......@@ -22,6 +22,7 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
......@@ -55,7 +56,6 @@ CONFIG_KMOD=y
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_LASAT is not set
# CONFIG_HP_LASERJET is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
......@@ -75,12 +75,15 @@ CONFIG_SOC_AU1X00=y
# CONFIG_SOC_AU1000 is not set
# CONFIG_SOC_AU1100 is not set
CONFIG_SOC_AU1500=y
# CONFIG_SOC_AU1550 is not set
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1500 is not set
# CONFIG_MIPS_PB1550 is not set
# CONFIG_MIPS_DB1000 is not set
# CONFIG_MIPS_DB1100 is not set
CONFIG_MIPS_DB1500=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_BOSPORUS is not set
# CONFIG_MIPS_MIRAGE is not set
# CONFIG_MIPS_XXS1500 is not set
......@@ -132,12 +135,12 @@ CONFIG_CPU_HAS_SYNC=y
#
# CONFIG_PCI is not set
CONFIG_MMU=y
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=m
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_TCIC is not set
# CONFIG_PCMCIA_AU1X00 is not set
......@@ -240,7 +243,6 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
......@@ -285,7 +287,7 @@ CONFIG_IDE_GENERIC=y
#
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
......@@ -293,10 +295,6 @@ CONFIG_IDE_GENERIC=y
# I2O device support
#
#
# Macintosh device drivers
#
#
# Networking support
#
......@@ -321,7 +319,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
......@@ -352,7 +349,6 @@ CONFIG_XFRM=y
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
......@@ -416,6 +412,7 @@ CONFIG_PPPOE=m
# Token Ring devices
#
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# Wan interfaces
......@@ -449,11 +446,13 @@ CONFIG_PCMCIA_3C589=m
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
# CONFIG_ISDN is not set
#
# Telephony Support
......@@ -517,12 +516,8 @@ CONFIG_SERIAL_AU1X00_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
......@@ -534,7 +529,6 @@ CONFIG_UNIX98_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
......@@ -558,6 +552,10 @@ CONFIG_RTC=y
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
......@@ -630,7 +628,6 @@ CONFIG_AUTOFS4_FS=m
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
......@@ -643,6 +640,7 @@ CONFIG_RAMFS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
......@@ -669,7 +667,7 @@ CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
......@@ -757,7 +755,9 @@ CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_TEST is not set
#
......
......@@ -22,6 +22,7 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
......@@ -50,7 +51,6 @@ CONFIG_IOSCHED_DEADLINE=y
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_LASAT is not set
# CONFIG_HP_LASERJET is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
......@@ -117,8 +117,8 @@ CONFIG_CPU_HAS_SYNC=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
CONFIG_MMU=y
# CONFIG_HOTPLUG is not set
#
# Executable file formats
......@@ -148,19 +148,21 @@ CONFIG_TRAD_SIGNALS=y
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
......@@ -186,6 +188,7 @@ CONFIG_IDE_TASKFILE_IO=y
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_IDEPCI is not set
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
......@@ -195,6 +198,11 @@ CONFIG_IDE_GENERIC=y
#
# CONFIG_SCSI is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
......@@ -203,9 +211,10 @@ CONFIG_IDE_GENERIC=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
......@@ -214,10 +223,6 @@ CONFIG_IDE_GENERIC=y
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
#
# Networking support
#
......@@ -241,7 +246,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
......@@ -256,7 +260,6 @@ CONFIG_XFRM=y
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
......@@ -300,13 +303,20 @@ CONFIG_NET_ETHERNET=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_PCI is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
......@@ -342,6 +352,7 @@ CONFIG_NET_ETHERNET=y
# CONFIG_TR is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# Wan interfaces
......@@ -362,11 +373,13 @@ CONFIG_NET_ETHERNET=y
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
# CONFIG_ISDN is not set
#
# Telephony Support
......@@ -432,12 +445,8 @@ CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
......@@ -449,7 +458,6 @@ CONFIG_UNIX98_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
......@@ -469,6 +477,10 @@ CONFIG_UNIX98_PTY_COUNT=256
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
......@@ -482,6 +494,7 @@ CONFIG_UNIX98_PTY_COUNT=256
#
# Graphics support
#
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_RIVA is not set
......@@ -561,7 +574,6 @@ CONFIG_EXT2_FS=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
......@@ -574,6 +586,7 @@ CONFIG_RAMFS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
......@@ -596,7 +609,7 @@ CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
......
......@@ -22,6 +22,7 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
......@@ -50,7 +51,6 @@ CONFIG_IOSCHED_DEADLINE=y
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_LASAT is not set
# CONFIG_HP_LASERJET is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
......@@ -119,7 +119,6 @@ CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_MMU=y
# CONFIG_HOTPLUG is not set
#
# Executable file formats
......@@ -160,8 +159,8 @@ CONFIG_TRAD_SIGNALS=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
......@@ -182,9 +181,10 @@ CONFIG_TRAD_SIGNALS=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
......@@ -193,10 +193,6 @@ CONFIG_TRAD_SIGNALS=y
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
#
# Networking support
#
......@@ -220,7 +216,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
......@@ -235,7 +230,6 @@ CONFIG_XFRM=y
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
......@@ -340,6 +334,7 @@ CONFIG_PCNET32=y
# CONFIG_TR is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# Wan interfaces
......@@ -360,11 +355,13 @@ CONFIG_PCNET32=y
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
# CONFIG_ISDN is not set
#
# Telephony Support
......@@ -430,12 +427,8 @@ CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
......@@ -447,7 +440,6 @@ CONFIG_UNIX98_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
......@@ -467,6 +459,10 @@ CONFIG_UNIX98_PTY_COUNT=256
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
......@@ -537,7 +533,6 @@ CONFIG_AUTOFS4_FS=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
......@@ -550,6 +545,7 @@ CONFIG_RAMFS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
......@@ -574,7 +570,7 @@ CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
......
......@@ -22,6 +22,7 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
......@@ -55,7 +56,6 @@ CONFIG_MACH_DECSTATION=y
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_LASAT is not set
# CONFIG_HP_LASERJET is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
......@@ -118,7 +118,6 @@ CONFIG_CPU_HAS_WB=y
#
CONFIG_TC=y
CONFIG_MMU=y
# CONFIG_HOTPLUG is not set
#
# Executable file formats
......@@ -156,7 +155,6 @@ CONFIG_TRAD_SIGNALS=y
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
......@@ -187,6 +185,12 @@ CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
#
# SCSI low-level drivers
#
......@@ -205,10 +209,9 @@ CONFIG_SCSI_DECNCR=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
......@@ -216,10 +219,6 @@ CONFIG_SCSI_DECNCR=y
# I2O device support
#
#
# Macintosh device drivers
#
#
# Networking support
#
......@@ -243,7 +242,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
......@@ -258,7 +256,6 @@ CONFIG_XFRM=y
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
......@@ -315,6 +312,7 @@ CONFIG_DECLANCE=y
# Token Ring devices
#
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# Wan interfaces
......@@ -335,11 +333,13 @@ CONFIG_DECLANCE=y
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
# CONFIG_ISDN is not set
#
# Telephony Support
......@@ -403,12 +403,8 @@ CONFIG_SERIAL_DZ_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
......@@ -420,7 +416,6 @@ CONFIG_UNIX98_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
......@@ -440,6 +435,10 @@ CONFIG_UNIX98_PTY_COUNT=256
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
......@@ -513,7 +512,6 @@ CONFIG_FS_POSIX_ACL=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
......@@ -526,6 +524,7 @@ CONFIG_RAMFS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
......
......@@ -22,6 +22,7 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
......@@ -62,7 +63,6 @@ CONFIG_CASIO_E55=y
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_LASAT is not set
# CONFIG_HP_LASERJET is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
......@@ -122,8 +122,8 @@ CONFIG_CPU_HAS_SYNC=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_ISA=y
CONFIG_MMU=y
# CONFIG_HOTPLUG is not set
#
# Executable file formats
......@@ -153,15 +153,16 @@ CONFIG_TRAD_SIGNALS=y
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
......@@ -186,6 +187,7 @@ CONFIG_IDE_TASKFILE_IO=y
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
......@@ -195,6 +197,11 @@ CONFIG_IDE_GENERIC=y
#
# CONFIG_SCSI is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
......@@ -205,7 +212,7 @@ CONFIG_IDE_GENERIC=y
#
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
......@@ -213,10 +220,6 @@ CONFIG_IDE_GENERIC=y
# I2O device support
#
#
# Macintosh device drivers
#
#
# Networking support
#
......@@ -238,7 +241,6 @@ CONFIG_IP_MULTICAST=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
......@@ -253,7 +255,6 @@ CONFIG_XFRM=y
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
......@@ -278,6 +279,11 @@ CONFIG_IPV6_SCTP__=y
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
......@@ -289,6 +295,16 @@ CONFIG_NETDEVICES=y
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_PCI is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
......@@ -308,7 +324,9 @@ CONFIG_NET_ETHERNET=y
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# Wan interfaces
......@@ -329,11 +347,13 @@ CONFIG_NET_ETHERNET=y
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
# CONFIG_ISDN is not set
#
# Telephony Support
......@@ -398,12 +418,8 @@ CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
......@@ -421,7 +437,13 @@ CONFIG_WATCHDOG=y
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_NVRAM is not set
#
# ISA-based Watchdog Cards
#
# CONFIG_PCWATCHDOG is not set
# CONFIG_MIXCOMWD is not set
# CONFIG_WDT is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
......@@ -441,6 +463,10 @@ CONFIG_WATCHDOG=y
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
......@@ -510,7 +536,6 @@ CONFIG_AUTOFS4_FS=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
......@@ -523,6 +548,7 @@ CONFIG_RAMFS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
......@@ -546,7 +572,7 @@ CONFIG_NFSD=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
......
......@@ -22,6 +22,7 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
......@@ -62,7 +63,6 @@ CONFIG_NEC_EAGLE=y
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_LASAT is not set
# CONFIG_HP_LASERJET is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
......@@ -127,12 +127,12 @@ CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_MMU=y
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_YENTA is not set
# CONFIG_I82092 is not set
# CONFIG_TCIC is not set
......@@ -243,8 +243,8 @@ CONFIG_MTD_PHYSMAP_BUSWIDTH=4
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_LBD is not set
#
......@@ -288,9 +288,10 @@ CONFIG_IDE_GENERIC=y
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
......@@ -299,10 +300,6 @@ CONFIG_IDE_GENERIC=y
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
#
# Networking support
#
......@@ -327,7 +324,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
......@@ -342,7 +338,6 @@ CONFIG_XFRM=y
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
......@@ -428,6 +423,7 @@ CONFIG_NET_ETHERNET=y
# CONFIG_TR is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# Wan interfaces
......@@ -461,11 +457,13 @@ CONFIG_PCMCIA_PCNET=m
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
# CONFIG_ISDN is not set
#
# Telephony Support
......@@ -532,12 +530,8 @@ CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
......@@ -561,7 +555,6 @@ CONFIG_WATCHDOG=y
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
......@@ -586,6 +579,10 @@ CONFIG_WATCHDOG=y
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
......@@ -656,7 +653,6 @@ CONFIG_AUTOFS4_FS=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
# CONFIG_TMPFS is not set
......@@ -669,6 +665,7 @@ CONFIG_RAMFS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
......@@ -698,7 +695,7 @@ CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
......@@ -747,7 +744,9 @@ CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_TEST is not set
#
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
......@@ -22,6 +22,7 @@ CONFIG_SWAP=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
......@@ -50,7 +51,6 @@ CONFIG_IOSCHED_DEADLINE=y
# CONFIG_MIPS_EV96100 is not set
# CONFIG_MIPS_IVR is not set
# CONFIG_LASAT is not set
# CONFIG_HP_LASERJET is not set
# CONFIG_MIPS_ITE8172 is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
......@@ -115,7 +115,6 @@ CONFIG_CPU_HAS_SYNC=y
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_MMU=y
# CONFIG_HOTPLUG is not set
#
# Executable file formats
......@@ -183,7 +182,7 @@ CONFIG_BLK_DEV_INITRD=y
#
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
......@@ -191,10 +190,6 @@ CONFIG_BLK_DEV_INITRD=y
# I2O device support
#
#
# Macintosh device drivers
#
#
# Networking support
#
......@@ -204,6 +199,8 @@ CONFIG_BLK_DEV_INITRD=y
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
......@@ -272,11 +269,8 @@ CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_UNIX98_PTYS is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
......@@ -288,7 +282,6 @@ CONFIG_SERIAL_CORE_CONSOLE=y
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
......@@ -308,6 +301,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
......@@ -390,6 +387,7 @@ CONFIG_RAMFS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
......@@ -17,15 +17,27 @@
void (*irq_setup)(void);
#ifdef CONFIG_KGDB
static int kgdb_flag = 1;
static int __init nokgdb(char *str)
{
kgdb_flag = 0;
return 1;
}
__setup("nokgdb", nokgdb);
#endif
void __init init_IRQ(void)
{
#ifdef CONFIG_KGDB
extern void breakpoint(void);
extern void set_debug_traps(void);
printk("Wait for gdb client connection ...\n");
set_debug_traps();
breakpoint();
if (kgdb_flag) {
printk("Wait for gdb client connection ...\n");
set_debug_traps();
breakpoint();
}
#endif
/* set up default irq controller */
init_generic_irq();
......
This diff is collapsed.
......@@ -37,6 +37,7 @@ obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_I8259) += i8259.o
obj-$(CONFIG_IRQ_CPU) += irq_cpu.o
obj-$(CONFIG_IRQ_CPU_RM7K) += irq-rm7000.o
obj-$(CONFIG_MIPS_MV64340) += irq-mv6434x.o
obj-$(CONFIG_MIPS32) += scall32-o32.o
obj-$(CONFIG_MIPS64) += scall64-64.o
......@@ -54,5 +55,6 @@ obj-$(CONFIG_MIPS64) += cpu-bugs64.o
obj-$(CONFIG_GEN_RTC) += genrtc.o
CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
CFLAGS_ioctl32.o += -Ifs/
EXTRA_AFLAGS := $(CFLAGS)
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment