Commit 7163c7c9 authored by Ishizaki Kou's avatar Ishizaki Kou Committed by Paul Mackerras

[POWERPC] Celleb: setup usb host controller in SCC

USB host controller in SCC requires enable sequence. It should be done
before USB host drivers start.
Signed-off-by: default avatarKou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
parent 32f39b05
/*
* SCC (Super Companion Chip) UHC setup
*
* (C) Copyright 2006-2007 TOSHIBA CORPORATION
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <asm/delay.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include "scc.h"
#define UHC_RESET_WAIT_MAX 10000
static inline int uhc_clkctrl_ready(u32 val)
{
const u32 mask = SCC_UHC_USBCEN | SCC_UHC_USBCEN;
return((val & mask) == mask);
}
/*
* UHC(usb host controler) enable function.
* affect to both of OHCI and EHCI core module.
*/
static void enable_scc_uhc(struct pci_dev *dev)
{
void __iomem *uhc_base;
u32 __iomem *uhc_clkctrl;
u32 __iomem *uhc_ecmode;
u32 val = 0;
int i;
if (!machine_is(celleb))
return;
uhc_base = ioremap(pci_resource_start(dev, 0),
pci_resource_len(dev, 0));
if (!uhc_base) {
printk(KERN_ERR "failed to map UHC register base.\n");
return;
}
uhc_clkctrl = uhc_base + SCC_UHC_CKRCTRL;
uhc_ecmode = uhc_base + SCC_UHC_ECMODE;
/* setup for normal mode */
val |= SCC_UHC_F48MCKLEN;
out_be32(uhc_clkctrl, val);
val |= SCC_UHC_PHY_SUSPEND_SEL;
out_be32(uhc_clkctrl, val);
udelay(10);
val |= SCC_UHC_PHYEN;
out_be32(uhc_clkctrl, val);
udelay(50);
/* disable reset */
val |= SCC_UHC_HCLKEN;
out_be32(uhc_clkctrl, val);
val |= (SCC_UHC_USBCEN | SCC_UHC_USBEN);
out_be32(uhc_clkctrl, val);
i = 0;
while (!uhc_clkctrl_ready(in_be32(uhc_clkctrl))) {
udelay(10);
if (i++ > UHC_RESET_WAIT_MAX) {
printk(KERN_ERR "Failed to disable UHC reset %x\n",
in_be32(uhc_clkctrl));
break;
}
}
/* Endian Conversion Mode for Master ALL area */
out_be32(uhc_ecmode, SCC_UHC_ECMODE_BY_BYTE);
iounmap(uhc_base);
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA_2,
PCI_DEVICE_ID_TOSHIBA_SCC_USB, enable_scc_uhc);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment