Commit 718af5bc authored by Heiner Kallweit's avatar Heiner Kallweit Committed by David S. Miller

r8169: improve conditional firmware loading for RTL8168d

Using constant MII_EXPANSION is misleading here because register 0x06
has a different meaning on page 0x0005. Here a proprietary PHY
parameter is read by writing the parameter id to register 0x05 on page
0x0005, followed by reading the parameter value from register 0x06.
Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 725ea4bf
......@@ -2297,14 +2297,6 @@ static void rtl_apply_firmware(struct rtl8169_private *tp)
rtl_fw_write_firmware(tp, tp->rtl_fw);
}
static void rtl_apply_firmware_cond(struct rtl8169_private *tp, u8 reg, u16 val)
{
if (rtl_readphy(tp, reg) != val)
netif_warn(tp, hw, tp->dev, "chipset not ready for firmware\n");
else
rtl_apply_firmware(tp);
}
static void rtl8168_config_eee_mac(struct rtl8169_private *tp)
{
/* Adjust EEE LED frequency */
......@@ -2691,6 +2683,21 @@ static const struct phy_reg rtl8168d_1_phy_reg_init_1[] = {
{ 0x1f, 0x0002 }
};
static void rtl8168d_apply_firmware_cond(struct rtl8169_private *tp, u16 val)
{
u16 reg_val;
rtl_writephy(tp, 0x1f, 0x0005);
rtl_writephy(tp, 0x05, 0x001b);
reg_val = rtl_readphy(tp, 0x06);
rtl_writephy(tp, 0x1f, 0x0000);
if (reg_val != val)
netif_warn(tp, hw, tp->dev, "chipset not ready for firmware\n");
else
rtl_apply_firmware(tp);
}
static void rtl8168d_1_hw_phy_config(struct rtl8169_private *tp)
{
rtl_writephy_batch(tp, rtl8168d_1_phy_reg_init_0);
......@@ -2737,13 +2744,9 @@ static void rtl8168d_1_hw_phy_config(struct rtl8169_private *tp)
rtl_writephy(tp, 0x1f, 0x0002);
rtl_w0w1_phy(tp, 0x02, 0x0100, 0x0600);
rtl_w0w1_phy(tp, 0x03, 0x0000, 0xe000);
rtl_writephy(tp, 0x1f, 0x0005);
rtl_writephy(tp, 0x05, 0x001b);
rtl_apply_firmware_cond(tp, MII_EXPANSION, 0xbf00);
rtl_writephy(tp, 0x1f, 0x0000);
rtl8168d_apply_firmware_cond(tp, 0xbf00);
}
static void rtl8168d_2_hw_phy_config(struct rtl8169_private *tp)
......@@ -2782,13 +2785,9 @@ static void rtl8168d_2_hw_phy_config(struct rtl8169_private *tp)
/* Switching regulator Slew rate */
rtl_writephy(tp, 0x1f, 0x0002);
rtl_patchphy(tp, 0x0f, 0x0017);
rtl_writephy(tp, 0x1f, 0x0005);
rtl_writephy(tp, 0x05, 0x001b);
rtl_apply_firmware_cond(tp, MII_EXPANSION, 0xb300);
rtl_writephy(tp, 0x1f, 0x0000);
rtl8168d_apply_firmware_cond(tp, 0xb300);
}
static void rtl8168d_3_hw_phy_config(struct rtl8169_private *tp)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment