drm/i915/tc: Fix TypeC port init/resume time sanitization

Atm during driver loading and system resume TypeC ports are accessed
before their HW/SW state is synced. Move the TypeC port sanitization to
the encoder's sync_state hook to fix this.

v2: Handle the encoder disabled case in gen11_dsi_sync_state() as well
    (Jose, Jani)

Fixes: f9e76a6e ("drm/i915: Add an encoder hook to sanitize its state during init/resume")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929132833.2253961-1-imre.deak@intel.com

drivers/gpu/drm/i915/display/icl_dsi.c

@@ -1599,8 +1599,14 @@ static void gen11_dsi_sync_state(struct intel_encoder *encoder,
 				 const struct intel_crtc_state *crtc_state)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->uapi.crtc);
-	enum pipe pipe = intel_crtc->pipe;
+	struct intel_crtc *intel_crtc;
+	enum pipe pipe;
+
+	if (!crtc_state)
+		return;
+
+	intel_crtc = to_intel_crtc(crtc_state->uapi.crtc);
+	pipe = intel_crtc->pipe;
 
 	/* wa verify 1409054076:icl,jsl,ehl */
 	if (DISPLAY_VER(dev_priv) == 11 && pipe == PIPE_B &&

drivers/gpu/drm/i915/display/intel_ddi.c

@@ -3838,7 +3838,13 @@ void hsw_ddi_get_config(struct intel_encoder *encoder,
 static void intel_ddi_sync_state(struct intel_encoder *encoder,
 				 const struct intel_crtc_state *crtc_state)
 {
-	if (intel_crtc_has_dp_encoder(crtc_state))
+	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
+	enum phy phy = intel_port_to_phy(i915, encoder->port);
+
+	if (intel_phy_is_tc(i915, phy))
+		intel_tc_port_sanitize(enc_to_dig_port(encoder));
+
+	if (crtc_state && intel_crtc_has_dp_encoder(crtc_state))
 		intel_dp_sync_state(encoder, crtc_state);
 }
 

drivers/gpu/drm/i915/display/intel_display.c

@@ -12317,18 +12317,16 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 	readout_plane_state(dev_priv);
 
 	for_each_intel_encoder(dev, encoder) {
+		struct intel_crtc_state *crtc_state = NULL;
+
 		pipe = 0;
 
 		if (encoder->get_hw_state(encoder, &pipe)) {
-			struct intel_crtc_state *crtc_state;
-
 			crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
 			crtc_state = to_intel_crtc_state(crtc->base.state);
 
 			encoder->base.crtc = &crtc->base;
 			intel_encoder_get_config(encoder, crtc_state);
-			if (encoder->sync_state)
-				encoder->sync_state(encoder, crtc_state);
 
 			/* read out to slave crtc as well for bigjoiner */
 			if (crtc_state->bigjoiner) {
@@ -12343,6 +12341,9 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 			encoder->base.crtc = NULL;
 		}
 
+		if (encoder->sync_state)
+			encoder->sync_state(encoder, crtc_state);
+
 		drm_dbg_kms(&dev_priv->drm,
 			    "[ENCODER:%d:%s] hw state readout: %s, pipe %c\n",
 			    encoder->base.base.id, encoder->base.name,
@@ -12625,17 +12626,6 @@ intel_modeset_setup_hw_state(struct drm_device *dev,
 	intel_modeset_readout_hw_state(dev);
 
 	/* HW state is read out, now we need to sanitize this mess. */
-
-	/* Sanitize the TypeC port mode upfront, encoders depend on this */
-	for_each_intel_encoder(dev, encoder) {
-		enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
-
-		/* We need to sanitize only the MST primary port. */
-		if (encoder->type != INTEL_OUTPUT_DP_MST &&
-		    intel_phy_is_tc(dev_priv, phy))
-			intel_tc_port_sanitize(enc_to_dig_port(encoder));
-	}
-
 	get_encoder_power_domains(dev_priv);
 
 	if (HAS_PCH_IBX(dev_priv))