Commit 719655a1 authored by Andrew Lunn's avatar Andrew Lunn Committed by David S. Miller

net: phy: Replace phy driver features u32 with link_mode bitmap

This is one step in allowing phylib to make use of link_mode bitmaps,
instead of u32 for supported and advertised features. Convert the phy
drivers to use bitmaps to indicates the features they support.

Build bitmap equivalents of the u32 values at runtime, and have the
drivers point to the appropriate bitmap. These bitmaps are shared, and
we don't want a driver to modify them. So mark them __ro_after_init.

Within phylib, the features bitmap is currently turned back into a
u32. This will be removed once the whole of phylib, and the drivers
are converted to use bitmaps.
Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent d0939c26
......@@ -988,8 +988,8 @@ static int pxa168_init_phy(struct net_device *dev)
cmd.base.phy_address = pep->phy_addr;
cmd.base.speed = pep->phy_speed;
cmd.base.duplex = pep->phy_duplex;
ethtool_convert_legacy_u32_to_link_mode(cmd.link_modes.advertising,
PHY_BASIC_FEATURES);
bitmap_copy(cmd.link_modes.advertising, PHY_BASIC_FEATURES,
__ETHTOOL_LINK_MODE_MASK_NBITS);
cmd.base.autoneg = AUTONEG_ENABLE;
if (cmd.base.speed != 0)
......
......@@ -115,7 +115,7 @@ static struct phy_driver aquantia_driver[] = {
.phy_id = PHY_ID_AQ1202,
.phy_id_mask = 0xfffffff0,
.name = "Aquantia AQ1202",
.features = PHY_AQUANTIA_FEATURES,
.features = PHY_10GBIT_FULL_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.aneg_done = genphy_c45_aneg_done,
.config_aneg = aquantia_config_aneg,
......@@ -127,7 +127,7 @@ static struct phy_driver aquantia_driver[] = {
.phy_id = PHY_ID_AQ2104,
.phy_id_mask = 0xfffffff0,
.name = "Aquantia AQ2104",
.features = PHY_AQUANTIA_FEATURES,
.features = PHY_10GBIT_FULL_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.aneg_done = genphy_c45_aneg_done,
.config_aneg = aquantia_config_aneg,
......@@ -139,7 +139,7 @@ static struct phy_driver aquantia_driver[] = {
.phy_id = PHY_ID_AQR105,
.phy_id_mask = 0xfffffff0,
.name = "Aquantia AQR105",
.features = PHY_AQUANTIA_FEATURES,
.features = PHY_10GBIT_FULL_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.aneg_done = genphy_c45_aneg_done,
.config_aneg = aquantia_config_aneg,
......@@ -151,7 +151,7 @@ static struct phy_driver aquantia_driver[] = {
.phy_id = PHY_ID_AQR106,
.phy_id_mask = 0xfffffff0,
.name = "Aquantia AQR106",
.features = PHY_AQUANTIA_FEATURES,
.features = PHY_10GBIT_FULL_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.aneg_done = genphy_c45_aneg_done,
.config_aneg = aquantia_config_aneg,
......@@ -163,7 +163,7 @@ static struct phy_driver aquantia_driver[] = {
.phy_id = PHY_ID_AQR107,
.phy_id_mask = 0xfffffff0,
.name = "Aquantia AQR107",
.features = PHY_AQUANTIA_FEATURES,
.features = PHY_10GBIT_FULL_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.aneg_done = genphy_c45_aneg_done,
.config_aneg = aquantia_config_aneg,
......@@ -175,7 +175,7 @@ static struct phy_driver aquantia_driver[] = {
.phy_id = PHY_ID_AQR405,
.phy_id_mask = 0xfffffff0,
.name = "Aquantia AQR405",
.features = PHY_AQUANTIA_FEATURES,
.features = PHY_10GBIT_FULL_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.aneg_done = genphy_c45_aneg_done,
.config_aneg = aquantia_config_aneg,
......
......@@ -42,6 +42,9 @@ static int bcm63xx_config_init(struct phy_device *phydev)
{
int reg, err;
/* ASYM_PAUSE bit is marked RO in datasheet, so don't cheat */
phydev->supported |= SUPPORTED_Pause;
reg = phy_read(phydev, MII_BCM63XX_IR);
if (reg < 0)
return reg;
......@@ -65,8 +68,7 @@ static struct phy_driver bcm63xx_driver[] = {
.phy_id = 0x00406000,
.phy_id_mask = 0xfffffc00,
.name = "Broadcom BCM63XX (1)",
/* ASYM_PAUSE bit is marked RO in datasheet, so don't cheat */
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
.features = PHY_BASIC_FEATURES,
.flags = PHY_HAS_INTERRUPT | PHY_IS_INTERNAL,
.config_init = bcm63xx_config_init,
.ack_interrupt = bcm_phy_ack_intr,
......@@ -75,8 +77,7 @@ static struct phy_driver bcm63xx_driver[] = {
/* same phy as above, with just a different OUI */
.phy_id = 0x002bdc00,
.phy_id_mask = 0xfffffc00,
.name = "Broadcom BCM63XX (2)",
.features = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
.features = PHY_BASIC_FEATURES,
.flags = PHY_HAS_INTERRUPT | PHY_IS_INTERNAL,
.config_init = bcm63xx_config_init,
.ack_interrupt = bcm_phy_ack_intr,
......
......@@ -2201,7 +2201,7 @@ static struct phy_driver marvell_drivers[] = {
.phy_id = MARVELL_PHY_ID_88E1510,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1510",
.features = PHY_GBIT_FEATURES | SUPPORTED_FIBRE,
.features = PHY_GBIT_FIBRE_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.probe = &m88e1510_probe,
.config_init = &m88e1510_config_init,
......
......@@ -535,16 +535,7 @@ static struct phy_driver mv3310_drivers[] = {
.phy_id = 0x002b09aa,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "mv88x3310",
.features = SUPPORTED_10baseT_Full |
SUPPORTED_10baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_1000baseT_Full |
SUPPORTED_Autoneg |
SUPPORTED_TP |
SUPPORTED_FIBRE |
SUPPORTED_10000baseT_Full |
SUPPORTED_Backplane,
.features = PHY_10GBIT_FEATURES,
.soft_reset = gen10g_no_soft_reset,
.config_init = mv3310_config_init,
.probe = mv3310_probe,
......
......@@ -46,7 +46,7 @@ static struct phy_driver microchip_t1_phy_driver[] = {
.phy_id_mask = 0xfffffff0,
.name = "Microchip LAN87xx T1",
.features = SUPPORTED_100baseT_Full,
.features = PHY_BASIC_T1_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = genphy_config_init,
......
......@@ -29,6 +29,7 @@
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/bitmap.h>
#include <linux/phy.h>
#include <linux/phy_led_triggers.h>
#include <linux/mdio.h>
......@@ -42,6 +43,149 @@ MODULE_DESCRIPTION("PHY library");
MODULE_AUTHOR("Andy Fleming");
MODULE_LICENSE("GPL");
__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_features) __ro_after_init;
EXPORT_SYMBOL_GPL(phy_basic_features);
__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_t1_features) __ro_after_init;
EXPORT_SYMBOL_GPL(phy_basic_t1_features);
__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_features) __ro_after_init;
EXPORT_SYMBOL_GPL(phy_gbit_features);
__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_fibre_features) __ro_after_init;
EXPORT_SYMBOL_GPL(phy_gbit_fibre_features);
__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_all_ports_features) __ro_after_init;
EXPORT_SYMBOL_GPL(phy_gbit_all_ports_features);
__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_features) __ro_after_init;
EXPORT_SYMBOL_GPL(phy_10gbit_features);
static const int phy_basic_ports_array[] = {
ETHTOOL_LINK_MODE_Autoneg_BIT,
ETHTOOL_LINK_MODE_TP_BIT,
ETHTOOL_LINK_MODE_MII_BIT,
};
static const int phy_fibre_port_array[] = {
ETHTOOL_LINK_MODE_FIBRE_BIT,
};
static const int phy_all_ports_features_array[] = {
ETHTOOL_LINK_MODE_Autoneg_BIT,
ETHTOOL_LINK_MODE_TP_BIT,
ETHTOOL_LINK_MODE_MII_BIT,
ETHTOOL_LINK_MODE_FIBRE_BIT,
ETHTOOL_LINK_MODE_AUI_BIT,
ETHTOOL_LINK_MODE_BNC_BIT,
ETHTOOL_LINK_MODE_Backplane_BIT,
};
static const int phy_10_100_features_array[] = {
ETHTOOL_LINK_MODE_10baseT_Half_BIT,
ETHTOOL_LINK_MODE_10baseT_Full_BIT,
ETHTOOL_LINK_MODE_100baseT_Half_BIT,
ETHTOOL_LINK_MODE_100baseT_Full_BIT,
};
static const int phy_basic_t1_features_array[] = {
ETHTOOL_LINK_MODE_TP_BIT,
ETHTOOL_LINK_MODE_100baseT_Full_BIT,
};
static const int phy_gbit_features_array[] = {
ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
};
static const int phy_10gbit_features_array[] = {
ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
};
__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_full_features) __ro_after_init;
EXPORT_SYMBOL_GPL(phy_10gbit_full_features);
static const int phy_10gbit_full_features_array[] = {
ETHTOOL_LINK_MODE_10baseT_Full_BIT,
ETHTOOL_LINK_MODE_100baseT_Full_BIT,
ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
};
static void features_init(void)
{
/* 10/100 half/full*/
linkmode_set_bit_array(phy_basic_ports_array,
ARRAY_SIZE(phy_basic_ports_array),
phy_basic_features);
linkmode_set_bit_array(phy_10_100_features_array,
ARRAY_SIZE(phy_10_100_features_array),
phy_basic_features);
/* 100 full, TP */
linkmode_set_bit_array(phy_basic_t1_features_array,
ARRAY_SIZE(phy_basic_t1_features_array),
phy_basic_t1_features);
/* 10/100 half/full + 1000 half/full */
linkmode_set_bit_array(phy_basic_ports_array,
ARRAY_SIZE(phy_basic_ports_array),
phy_gbit_features);
linkmode_set_bit_array(phy_10_100_features_array,
ARRAY_SIZE(phy_10_100_features_array),
phy_gbit_features);
linkmode_set_bit_array(phy_gbit_features_array,
ARRAY_SIZE(phy_gbit_features_array),
phy_gbit_features);
/* 10/100 half/full + 1000 half/full + fibre*/
linkmode_set_bit_array(phy_basic_ports_array,
ARRAY_SIZE(phy_basic_ports_array),
phy_gbit_fibre_features);
linkmode_set_bit_array(phy_10_100_features_array,
ARRAY_SIZE(phy_10_100_features_array),
phy_gbit_fibre_features);
linkmode_set_bit_array(phy_gbit_features_array,
ARRAY_SIZE(phy_gbit_features_array),
phy_gbit_fibre_features);
linkmode_set_bit_array(phy_fibre_port_array,
ARRAY_SIZE(phy_fibre_port_array),
phy_gbit_fibre_features);
/* 10/100 half/full + 1000 half/full + TP/MII/FIBRE/AUI/BNC/Backplane*/
linkmode_set_bit_array(phy_all_ports_features_array,
ARRAY_SIZE(phy_all_ports_features_array),
phy_gbit_all_ports_features);
linkmode_set_bit_array(phy_10_100_features_array,
ARRAY_SIZE(phy_10_100_features_array),
phy_gbit_all_ports_features);
linkmode_set_bit_array(phy_gbit_features_array,
ARRAY_SIZE(phy_gbit_features_array),
phy_gbit_all_ports_features);
/* 10/100 half/full + 1000 half/full + 10G full*/
linkmode_set_bit_array(phy_all_ports_features_array,
ARRAY_SIZE(phy_all_ports_features_array),
phy_10gbit_features);
linkmode_set_bit_array(phy_10_100_features_array,
ARRAY_SIZE(phy_10_100_features_array),
phy_10gbit_features);
linkmode_set_bit_array(phy_gbit_features_array,
ARRAY_SIZE(phy_gbit_features_array),
phy_10gbit_features);
linkmode_set_bit_array(phy_10gbit_features_array,
ARRAY_SIZE(phy_10gbit_features_array),
phy_10gbit_features);
/* 10/100/1000/10G full */
linkmode_set_bit_array(phy_all_ports_features_array,
ARRAY_SIZE(phy_all_ports_features_array),
phy_10gbit_full_features);
linkmode_set_bit_array(phy_10gbit_full_features_array,
ARRAY_SIZE(phy_10gbit_full_features_array),
phy_10gbit_full_features);
}
void phy_device_free(struct phy_device *phydev)
{
put_device(&phydev->mdio.dev);
......@@ -1936,6 +2080,7 @@ static int phy_probe(struct device *dev)
struct phy_device *phydev = to_phy_device(dev);
struct device_driver *drv = phydev->mdio.dev.driver;
struct phy_driver *phydrv = to_phy_driver(drv);
u32 features;
int err = 0;
phydev->drv = phydrv;
......@@ -1956,7 +2101,8 @@ static int phy_probe(struct device *dev)
* a controller will attach, and may modify one
* or both of these values
*/
phydev->supported = phydrv->features;
ethtool_convert_link_mode_to_legacy_u32(&features, phydrv->features);
phydev->supported = features;
of_set_phy_supported(phydev);
phydev->advertising = phydev->supported;
......@@ -1976,10 +2122,14 @@ static int phy_probe(struct device *dev)
* (e.g. hardware erratum) where the driver wants to set only one
* of these bits.
*/
if (phydrv->features & (SUPPORTED_Pause | SUPPORTED_Asym_Pause)) {
if (test_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydrv->features) ||
test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydrv->features)) {
phydev->supported &= ~(SUPPORTED_Pause | SUPPORTED_Asym_Pause);
phydev->supported |= phydrv->features &
(SUPPORTED_Pause | SUPPORTED_Asym_Pause);
if (test_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydrv->features))
phydev->supported |= SUPPORTED_Pause;
if (test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
phydrv->features))
phydev->supported |= SUPPORTED_Asym_Pause;
} else {
phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
}
......@@ -2092,9 +2242,7 @@ static struct phy_driver genphy_driver = {
.name = "Generic PHY",
.soft_reset = genphy_no_soft_reset,
.config_init = genphy_config_init,
.features = PHY_GBIT_FEATURES | SUPPORTED_MII |
SUPPORTED_AUI | SUPPORTED_FIBRE |
SUPPORTED_BNC,
.features = PHY_GBIT_ALL_PORTS_FEATURES,
.aneg_done = genphy_aneg_done,
.suspend = genphy_suspend,
.resume = genphy_resume,
......@@ -2109,6 +2257,8 @@ static int __init phy_init(void)
if (rc)
return rc;
features_init();
rc = phy_driver_register(&genphy_10g_driver, THIS_MODULE);
if (rc)
goto err_10g;
......
......@@ -43,6 +43,15 @@ static inline void linkmode_set_bit(int nr, volatile unsigned long *addr)
__set_bit(nr, addr);
}
static inline void linkmode_set_bit_array(const int *array, int array_size,
unsigned long *addr)
{
int i;
for (i = 0; i < array_size; i++)
linkmode_set_bit(array[i], addr);
}
static inline void linkmode_clear_bit(int nr, volatile unsigned long *addr)
{
__clear_bit(nr, addr);
......
......@@ -42,13 +42,21 @@
#define PHY_1000BT_FEATURES (SUPPORTED_1000baseT_Half | \
SUPPORTED_1000baseT_Full)
#define PHY_BASIC_FEATURES (PHY_10BT_FEATURES | \
PHY_100BT_FEATURES | \
PHY_DEFAULT_FEATURES)
#define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \
PHY_1000BT_FEATURES)
extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_features) __ro_after_init;
extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_t1_features) __ro_after_init;
extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_features) __ro_after_init;
extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_fibre_features) __ro_after_init;
extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_all_ports_features) __ro_after_init;
extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_features) __ro_after_init;
extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_full_features) __ro_after_init;
#define PHY_BASIC_FEATURES ((unsigned long *)&phy_basic_features)
#define PHY_BASIC_T1_FEATURES ((unsigned long *)&phy_basic_t1_features)
#define PHY_GBIT_FEATURES ((unsigned long *)&phy_gbit_features)
#define PHY_GBIT_FIBRE_FEATURES ((unsigned long *)&phy_gbit_fibre_features)
#define PHY_GBIT_ALL_PORTS_FEATURES ((unsigned long *)&phy_gbit_all_ports_features)
#define PHY_10GBIT_FEATURES ((unsigned long *)&phy_10gbit_features)
#define PHY_10GBIT_FULL_FEATURES ((unsigned long *)&phy_10gbit_full_features)
/*
* Set phydev->irq to PHY_POLL if interrupts are not supported,
......@@ -510,7 +518,7 @@ struct phy_driver {
u32 phy_id;
char *name;
u32 phy_id_mask;
u32 features;
const unsigned long * const features;
u32 flags;
const void *driver_data;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment