Commit 71f4b9cd authored by Jingoo Han's avatar Jingoo Han Committed by Samuel Ortiz

mfd: omap-usb-host: Use devm_gpio_request_one()

Use devm_gpio_request_one() to make cleanup paths more simple.
Signed-off-by: default avatarJingoo Han <jg1.han@samsung.com>
Signed-off-by: default avatarSamuel Ortiz <sameo@linux.intel.com>
parent 54d34920
......@@ -437,11 +437,11 @@ static void omap_usbhs_init(struct device *dev)
if (pdata->phy_reset) {
if (gpio_is_valid(pdata->reset_gpio_port[0]))
gpio_request_one(pdata->reset_gpio_port[0],
devm_gpio_request_one(dev, pdata->reset_gpio_port[0],
GPIOF_OUT_INIT_LOW, "USB1 PHY reset");
if (gpio_is_valid(pdata->reset_gpio_port[1]))
gpio_request_one(pdata->reset_gpio_port[1],
devm_gpio_request_one(dev, pdata->reset_gpio_port[1],
GPIOF_OUT_INIT_LOW, "USB2 PHY reset");
/* Hold the PHY in RESET for enough time till DIR is high */
......@@ -492,21 +492,6 @@ static void omap_usbhs_init(struct device *dev)
}
}
static void omap_usbhs_deinit(struct device *dev)
{
struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
struct usbhs_omap_platform_data *pdata = omap->pdata;
if (pdata->phy_reset) {
if (gpio_is_valid(pdata->reset_gpio_port[0]))
gpio_free(pdata->reset_gpio_port[0]);
if (gpio_is_valid(pdata->reset_gpio_port[1]))
gpio_free(pdata->reset_gpio_port[1]);
}
}
/**
* usbhs_omap_probe - initialize TI-based HCDs
*
......@@ -709,8 +694,6 @@ static int usbhs_omap_probe(struct platform_device *pdev)
return 0;
err_alloc:
omap_usbhs_deinit(&pdev->dev);
for (i = 0; i < omap->nports; i++) {
if (!IS_ERR(omap->utmi_clk[i]))
clk_put(omap->utmi_clk[i]);
......@@ -755,8 +738,6 @@ static int usbhs_omap_remove(struct platform_device *pdev)
struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
int i;
omap_usbhs_deinit(&pdev->dev);
for (i = 0; i < omap->nports; i++) {
if (!IS_ERR(omap->utmi_clk[i]))
clk_put(omap->utmi_clk[i]);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment