Commit 71f60fbe authored by Artem Bityutskiy's avatar Artem Bityutskiy Committed by David Woodhouse

mtd: doc2001plus: initialize writebufsize

The writebufsize concept was introduce by commit
"0e4ca7e5 mtd: add writebufsize field to mtd_info struct" and it represents
the maximum amount of data the device writes to the media at a time. This is
an important parameter for UBIFS which is used during recovery and which
basically defines how big a corruption caused by a power cut can be.

Set it to be equivalent to mtd->writesize because this is the maximum amount
of data the driver writes at a time.
Signed-off-by: default avatarArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: stable@kernel.org [2.6.38+]
Signed-off-by: default avatarDavid Woodhouse <David.Woodhouse@intel.com>
parent cca84b56
...@@ -467,7 +467,7 @@ void DoCMilPlus_init(struct mtd_info *mtd) ...@@ -467,7 +467,7 @@ void DoCMilPlus_init(struct mtd_info *mtd)
mtd->type = MTD_NANDFLASH; mtd->type = MTD_NANDFLASH;
mtd->flags = MTD_CAP_NANDFLASH; mtd->flags = MTD_CAP_NANDFLASH;
mtd->writesize = 512; mtd->writebufsize = mtd->writesize = 512;
mtd->oobsize = 16; mtd->oobsize = 16;
mtd->owner = THIS_MODULE; mtd->owner = THIS_MODULE;
mtd->_erase = doc_erase; mtd->_erase = doc_erase;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment