Commit 720bebdf authored by Dmitry Torokhov's avatar Dmitry Torokhov

Input: eeti_ts - rename eeti_ts_priv to eeti_ts

Also rename 'priv' variables to eeti.
Reviewed-by: default avatarDaniel Mack <daniel@zonque.org>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
parent 54bf0894
...@@ -43,7 +43,7 @@ static bool flip_y; ...@@ -43,7 +43,7 @@ static bool flip_y;
module_param(flip_y, bool, 0644); module_param(flip_y, bool, 0644);
MODULE_PARM_DESC(flip_y, "flip y coordinate"); MODULE_PARM_DESC(flip_y, "flip y coordinate");
struct eeti_ts_priv { struct eeti_ts {
struct i2c_client *client; struct i2c_client *client;
struct input_dev *input; struct input_dev *input;
struct work_struct work; struct work_struct work;
...@@ -60,25 +60,25 @@ struct eeti_ts_priv { ...@@ -60,25 +60,25 @@ struct eeti_ts_priv {
#define REPORT_BIT_HAS_PRESSURE (1 << 6) #define REPORT_BIT_HAS_PRESSURE (1 << 6)
#define REPORT_RES_BITS(v) (((v) >> 1) + EETI_TS_BITDEPTH) #define REPORT_RES_BITS(v) (((v) >> 1) + EETI_TS_BITDEPTH)
static inline int eeti_ts_irq_active(struct eeti_ts_priv *priv) static inline int eeti_ts_irq_active(struct eeti_ts *eeti)
{ {
return gpio_get_value(priv->irq_gpio) == priv->irq_active_high; return gpio_get_value(eeti->irq_gpio) == eeti->irq_active_high;
} }
static void eeti_ts_read(struct work_struct *work) static void eeti_ts_read(struct work_struct *work)
{ {
char buf[6]; char buf[6];
unsigned int x, y, res, pressed, to = 100; unsigned int x, y, res, pressed, to = 100;
struct eeti_ts_priv *priv = struct eeti_ts *eeti =
container_of(work, struct eeti_ts_priv, work); container_of(work, struct eeti_ts, work);
mutex_lock(&priv->mutex); mutex_lock(&eeti->mutex);
while (eeti_ts_irq_active(priv) && --to) while (eeti_ts_irq_active(eeti) && --to)
i2c_master_recv(priv->client, buf, sizeof(buf)); i2c_master_recv(eeti->client, buf, sizeof(buf));
if (!to) { if (!to) {
dev_err(&priv->client->dev, dev_err(&eeti->client->dev,
"unable to clear IRQ - line stuck?\n"); "unable to clear IRQ - line stuck?\n");
goto out; goto out;
} }
...@@ -103,62 +103,62 @@ static void eeti_ts_read(struct work_struct *work) ...@@ -103,62 +103,62 @@ static void eeti_ts_read(struct work_struct *work)
y = EETI_MAXVAL - y; y = EETI_MAXVAL - y;
if (buf[0] & REPORT_BIT_HAS_PRESSURE) if (buf[0] & REPORT_BIT_HAS_PRESSURE)
input_report_abs(priv->input, ABS_PRESSURE, buf[5]); input_report_abs(eeti->input, ABS_PRESSURE, buf[5]);
input_report_abs(priv->input, ABS_X, x); input_report_abs(eeti->input, ABS_X, x);
input_report_abs(priv->input, ABS_Y, y); input_report_abs(eeti->input, ABS_Y, y);
input_report_key(priv->input, BTN_TOUCH, !!pressed); input_report_key(eeti->input, BTN_TOUCH, !!pressed);
input_sync(priv->input); input_sync(eeti->input);
out: out:
mutex_unlock(&priv->mutex); mutex_unlock(&eeti->mutex);
} }
static irqreturn_t eeti_ts_isr(int irq, void *dev_id) static irqreturn_t eeti_ts_isr(int irq, void *dev_id)
{ {
struct eeti_ts_priv *priv = dev_id; struct eeti_ts *eeti = dev_id;
/* postpone I2C transactions as we are atomic */ /* postpone I2C transactions as we are atomic */
schedule_work(&priv->work); schedule_work(&eeti->work);
return IRQ_HANDLED; return IRQ_HANDLED;
} }
static void eeti_ts_start(struct eeti_ts_priv *priv) static void eeti_ts_start(struct eeti_ts *eeti)
{ {
enable_irq(priv->irq); enable_irq(eeti->irq);
/* Read the events once to arm the IRQ */ /* Read the events once to arm the IRQ */
eeti_ts_read(&priv->work); eeti_ts_read(&eeti->work);
} }
static void eeti_ts_stop(struct eeti_ts_priv *priv) static void eeti_ts_stop(struct eeti_ts *eeti)
{ {
disable_irq(priv->irq); disable_irq(eeti->irq);
cancel_work_sync(&priv->work); cancel_work_sync(&eeti->work);
} }
static int eeti_ts_open(struct input_dev *dev) static int eeti_ts_open(struct input_dev *dev)
{ {
struct eeti_ts_priv *priv = input_get_drvdata(dev); struct eeti_ts *eeti = input_get_drvdata(dev);
eeti_ts_start(priv); eeti_ts_start(eeti);
return 0; return 0;
} }
static void eeti_ts_close(struct input_dev *dev) static void eeti_ts_close(struct input_dev *dev)
{ {
struct eeti_ts_priv *priv = input_get_drvdata(dev); struct eeti_ts *eeti = input_get_drvdata(dev);
eeti_ts_stop(priv); eeti_ts_stop(eeti);
} }
static int eeti_ts_probe(struct i2c_client *client, static int eeti_ts_probe(struct i2c_client *client,
const struct i2c_device_id *idp) const struct i2c_device_id *idp)
{ {
struct eeti_ts_platform_data *pdata = dev_get_platdata(&client->dev); struct eeti_ts_platform_data *pdata = dev_get_platdata(&client->dev);
struct eeti_ts_priv *priv; struct eeti_ts *eeti;
struct input_dev *input; struct input_dev *input;
unsigned int irq_flags; unsigned int irq_flags;
int err = -ENOMEM; int err = -ENOMEM;
...@@ -170,13 +170,14 @@ static int eeti_ts_probe(struct i2c_client *client, ...@@ -170,13 +170,14 @@ static int eeti_ts_probe(struct i2c_client *client,
* for interrupts to occur. * for interrupts to occur.
*/ */
priv = kzalloc(sizeof(*priv), GFP_KERNEL); eeti = kzalloc(sizeof(*eeti), GFP_KERNEL);
if (!priv) { if (!eeti) {
dev_err(&client->dev, "failed to allocate driver data\n"); dev_err(&client->dev, "failed to allocate driver data\n");
return -ENOMEM; return -ENOMEM;
} }
mutex_init(&priv->mutex); mutex_init(&eeti->mutex);
input = input_allocate_device(); input = input_allocate_device();
if (!input) { if (!input) {
dev_err(&client->dev, "Failed to allocate input device.\n"); dev_err(&client->dev, "Failed to allocate input device.\n");
...@@ -196,30 +197,30 @@ static int eeti_ts_probe(struct i2c_client *client, ...@@ -196,30 +197,30 @@ static int eeti_ts_probe(struct i2c_client *client,
input->open = eeti_ts_open; input->open = eeti_ts_open;
input->close = eeti_ts_close; input->close = eeti_ts_close;
priv->client = client; eeti->client = client;
priv->input = input; eeti->input = input;
priv->irq_gpio = pdata->irq_gpio; eeti->irq_gpio = pdata->irq_gpio;
priv->irq = gpio_to_irq(pdata->irq_gpio); eeti->irq = gpio_to_irq(pdata->irq_gpio);
err = gpio_request_one(pdata->irq_gpio, GPIOF_IN, client->name); err = gpio_request_one(pdata->irq_gpio, GPIOF_IN, client->name);
if (err < 0) if (err < 0)
goto err1; goto err1;
priv->irq_active_high = pdata->irq_active_high; eeti->irq_active_high = pdata->irq_active_high;
irq_flags = priv->irq_active_high ? irq_flags = eeti->irq_active_high ?
IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING; IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING;
INIT_WORK(&priv->work, eeti_ts_read); INIT_WORK(&eeti->work, eeti_ts_read);
i2c_set_clientdata(client, priv); i2c_set_clientdata(client, eeti);
input_set_drvdata(input, priv); input_set_drvdata(input, eeti);
err = input_register_device(input); err = input_register_device(input);
if (err) if (err)
goto err2; goto err2;
err = request_irq(priv->irq, eeti_ts_isr, irq_flags, err = request_irq(eeti->irq, eeti_ts_isr, irq_flags,
client->name, priv); client->name, eeti);
if (err) { if (err) {
dev_err(&client->dev, "Unable to request touchscreen IRQ.\n"); dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
goto err3; goto err3;
...@@ -229,7 +230,7 @@ static int eeti_ts_probe(struct i2c_client *client, ...@@ -229,7 +230,7 @@ static int eeti_ts_probe(struct i2c_client *client,
* Disable the device for now. It will be enabled once the * Disable the device for now. It will be enabled once the
* input device is opened. * input device is opened.
*/ */
eeti_ts_stop(priv); eeti_ts_stop(eeti);
return 0; return 0;
...@@ -240,23 +241,23 @@ static int eeti_ts_probe(struct i2c_client *client, ...@@ -240,23 +241,23 @@ static int eeti_ts_probe(struct i2c_client *client,
gpio_free(pdata->irq_gpio); gpio_free(pdata->irq_gpio);
err1: err1:
input_free_device(input); input_free_device(input);
kfree(priv); kfree(eeti);
return err; return err;
} }
static int eeti_ts_remove(struct i2c_client *client) static int eeti_ts_remove(struct i2c_client *client)
{ {
struct eeti_ts_priv *priv = i2c_get_clientdata(client); struct eeti_ts *eeti = i2c_get_clientdata(client);
free_irq(priv->irq, priv); free_irq(eeti->irq, eeti);
/* /*
* eeti_ts_stop() leaves IRQ disabled. We need to re-enable it * eeti_ts_stop() leaves IRQ disabled. We need to re-enable it
* so that device still works if we reload the driver. * so that device still works if we reload the driver.
*/ */
enable_irq(priv->irq); enable_irq(eeti->irq);
input_unregister_device(priv->input); input_unregister_device(eeti->input);
kfree(priv); kfree(eeti);
return 0; return 0;
} }
...@@ -264,18 +265,18 @@ static int eeti_ts_remove(struct i2c_client *client) ...@@ -264,18 +265,18 @@ static int eeti_ts_remove(struct i2c_client *client)
static int __maybe_unused eeti_ts_suspend(struct device *dev) static int __maybe_unused eeti_ts_suspend(struct device *dev)
{ {
struct i2c_client *client = to_i2c_client(dev); struct i2c_client *client = to_i2c_client(dev);
struct eeti_ts_priv *priv = i2c_get_clientdata(client); struct eeti_ts *eeti = i2c_get_clientdata(client);
struct input_dev *input_dev = priv->input; struct input_dev *input_dev = eeti->input;
mutex_lock(&input_dev->mutex); mutex_lock(&input_dev->mutex);
if (input_dev->users) if (input_dev->users)
eeti_ts_stop(priv); eeti_ts_stop(eeti);
mutex_unlock(&input_dev->mutex); mutex_unlock(&input_dev->mutex);
if (device_may_wakeup(&client->dev)) if (device_may_wakeup(&client->dev))
enable_irq_wake(priv->irq); enable_irq_wake(eeti->irq);
return 0; return 0;
} }
...@@ -283,16 +284,16 @@ static int __maybe_unused eeti_ts_suspend(struct device *dev) ...@@ -283,16 +284,16 @@ static int __maybe_unused eeti_ts_suspend(struct device *dev)
static int __maybe_unused eeti_ts_resume(struct device *dev) static int __maybe_unused eeti_ts_resume(struct device *dev)
{ {
struct i2c_client *client = to_i2c_client(dev); struct i2c_client *client = to_i2c_client(dev);
struct eeti_ts_priv *priv = i2c_get_clientdata(client); struct eeti_ts *eeti = i2c_get_clientdata(client);
struct input_dev *input_dev = priv->input; struct input_dev *input_dev = eeti->input;
if (device_may_wakeup(&client->dev)) if (device_may_wakeup(&client->dev))
disable_irq_wake(priv->irq); disable_irq_wake(eeti->irq);
mutex_lock(&input_dev->mutex); mutex_lock(&input_dev->mutex);
if (input_dev->users) if (input_dev->users)
eeti_ts_start(priv); eeti_ts_start(eeti);
mutex_unlock(&input_dev->mutex); mutex_unlock(&input_dev->mutex);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment