Commit 7232344d authored by Hubert Feurstein's avatar Hubert Feurstein Committed by Russell King

ARM: 5751/1: ep93xx/micro9: Add Micro9-Slim

Add Contec Micro9-Slim support

Cc: Ryan Mallon <ryan@bluewatersys.com>

Requires: 5750/1
Signed-off-by: default avatarHubert Feurstein <hubert.feurstein@contec.at>
Acked-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 14636005
......@@ -153,6 +153,14 @@ config MACH_MICRO9L
Say 'Y' here if you want your kernel to support the
Contec Micro9-Lite board.
config MACH_MICRO9S
bool "Support Contec Micro9-Slim"
depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
select MACH_MICRO9
help
Say 'Y' here if you want your kernel to support the
Contec Micro9-Slim board.
config MACH_TS72XX
bool "Support Technologic Systems TS-72xx SBC"
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
......
......@@ -28,6 +28,7 @@
* Micro9-High has up to 64MB of 32-bit flash on CS1
* Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
* Micro9-Lite uses a seperate MTD map driver for flash support
* Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
*************************************************************************/
static struct physmap_flash_data micro9_flash_data;
......@@ -70,7 +71,7 @@ static void __init micro9_register_flash(void)
{
if (machine_is_micro9())
__micro9_register_flash(4);
else if (machine_is_micro9m())
else if (machine_is_micro9m() || machine_is_micro9s())
__micro9_register_flash(micro9_detect_bootwidth());
}
......@@ -129,3 +130,16 @@ MACHINE_START(MICRO9L, "Contec Micro9-Lite")
.init_machine = micro9_init_machine,
MACHINE_END
#endif
#ifdef CONFIG_MACH_MICRO9S
MACHINE_START(MICRO9S, "Contec Micro9-Slim")
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
.phys_io = EP93XX_APB_PHYS_BASE,
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_machine = micro9_init_machine,
MACHINE_END
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment